Un-Expected Logoff Issue

Hello.
I am using Apex version 4.1 on Windows 7 against an Oracle 10.2.0.5 instance via Oracle application server (and so, am using mod_plsql).
I created a page on which there is a single dynamic select list item populated by a SQL query. This all works fine. However, I noticed that if the cursor focus is in the select list drop down (meaning that I am in the middle of choosing an item from the list), if I then hit the backspace key, I am immediately logged off the application. My default login page shows up prompting me to log in again.
Does anyone know why this is happening?
I recall seeing a post somewhere (not sure if it was in this forum) where this behavior happens if there is only a single item on a page. This is my case. However, I tried adding another text item with no luck. I even created a branch to branck back to the same page. Still no change.
I searched through this forum for "un-expected logoff" but found nothing that addresses this behavior.
Thanks in advance for any help.
Elie

Hi Elie,
This is a browser function.
In internet explorer, and I assume most other browsers, the backspace key is equivalent to the back button so as you have only one page, pressing the backspace key will take you to your last page, the login page. The exception to this is if something like a text field has focus, in which case the backspace key performs a backspace on the characters behind it.
Regards
Andre

Similar Messages

Hi, I have a mid 2007 24inch iMac currently running on 10.5.8. Can I upgrade directly to 10.7 and if so, can I expect any issues? Thanks

Hi, I have a mid 2007 24inch iMac currently running on 10.5.8. Can I upgrade directly to 10.7 and if so, can I expect any issues? Thanks

You need to have a copy of Snow Leopard installed to access Lion in the Mac App Store. There's no direct path to upgrade from Leopard to Lion.
I did read a piece earlier this week about Apple giving free copies of Snow Leopard to new iCloud subscribers, you might want to look into this here:
http://www.macgasm.net/2012/04/18/apple-now-giving-away-snow-leopard-to-mobileme -customers-for-free/
Hope this helps.

Can we expect iPad-issues adressed?

Hi everybody
First post here. I must admit that I never cared too much about Apple - until I got the iPad 2 a year ago, which is by far
the best piece of electronics I have ever had.
Loving it so much there was no doubt I would love the new Ipad even more, so I got one
on the first day it was released in Denmark (march 23.). For me the heat and recharge-issues
were showstoppers, and I ended up returning it.
I really wanted to love it but it was uncomfortable to hold, and being a poweruser I got vert frustrated waiting for recharging.
Heres the question: Can we expect Apple to adress these issues in the near future?
If fixed, then I'm right back at the Apple-store.
Can anyone share some insight to the possibility of problem-fixing - or is it just the price for owning cutting-edge technology?
Regards, Kim, Denmark.

Vast majority of complaints are from people comparing the iPad 3 with the iPad 2, not thinking about the increased power usage of the device and increased battery capacity.
People are expecting the iPad 3 to operate exactly like the iPad 2 despite it having a quad-core graphics chip and 4 times the resolution screen. Simple logic should tell people that such a screen and graphics power uses more power, therefore operates slightly hotter, and requires a larger capacity battery that takes longer to charge. Unfortunately, most people don't think logically before running off to complain.

Customer Expected Price - Issue

Hi,
I have added the EDI1 & EDI2 CTypes in the Pricing procedure with requirements 9 & 8 respectively.
While i create the sales order with PR00 = 1000 USD
and add manually
EDI1 = 750 USD
the system saves the order normally & delivery could be processed.
i wish to block the order if there is a deviation of 0.05 currency units for EDI1.
How should i do this?
am i missing some configuration setting here?

Hi,
in conditin type u have provision changes which u can made there u put' D' OVER there .
And in copy contoles u have one more option that is pricing type "-D" TAHT MEANS .copy pricing elements unchanged .
copies the pricing elements unchanged with automatically determined or manually entered surcharges and discounts from the reference document (scales are not read again). This means that the value remains unchanged even if the billing quantity is different to the order quantity
does not redetermine the taxes
Copy pricing elements and values unchanged. The system
copies the pricing elements and values and automatically determined or manually entered surcharges and discounts from the reference document without changing them (scales are not read again). This means that the value remains unchanged even if the billing quantity is different to the order quantity.
does not redetermine the taxes.
I hope it will help full for you.
Regards,
venkataswamy.
Edited by: yanamadala venkataswamy on Aug 28, 2008 7:31 AM

Windows 7 User Logoff Issues

- After installing iTunes on my Windows 7 box, the OS would hang when logging off any user.
- Consulting MS support, they claimed the problem was with iTunes (specifically 'bonjour?')
- After uninstalling iTunes, the problem has not recurred.
I would like to use iTunes, but not at the expense of my OS.
Please advise.

Got the exact same thing. After hanging on log off a few times, now iTunes will not start.

IPhone 5S Call quality issues - Are they resolved?

Hi folks,
So long story short, I was previously a VZW customer with an iPhone 5S. When I was a customer, everything worked great, except one thing, Calls.
What would happen during is:
1) The calls would sound metallic/robotic
2) the calls would sort of go in and out (for example I would hear: " Yeah ... Fun at... Saturday)
(Both 1 and 2 would happen indoors and outdoors)
3) Calls would drop
So like any reasonable person, I called into Customer Service and was offered a Network Extender for $199. This did help indoors for the most part, but not outside (like literally outside my building; out of range perhaps?)
I read of others having the same issues here, so I knew I wasn't alone, but there was just no solution to the problem. I thought it was my iPhone at first. However, I ported out to AT&T and the calls were crystal clear compared to VZW. So that kinda confirmed it's not my phone.
My zip code is 10453 (and this area has great coverage according to the coverage map, but I couldn't get any more than 3 bars of LTE outside and 1-2 indoors). My question is, has this issue been resolved? If so how can I improve it? Honestly looking forward to being a VZW customer again, despite no simultaneous talk and surf on the iPhone.
Thanks for any comments/solutions offered!

When the person called me, I was indoors. I am the one with the ATT phone (wanting to switch to vzw) and never get this issue, not even when Sprint callers call me. The person who called me was outdoors and he has Verizon (zip: 10023)
The call was very choppy with the voice cutting in and out on his end, and the call was slightly metallic sounding. I could barely understand a word he was saying. The quality was exactly the same when I was with Verizon. At first I thought it was my phone, and now this confirms it never was my phone. I am truly convinced this is a notice cancellation issue with verizon because like I said, I never get this issue when Sprint users call me. It doesn't really matter who initiates the call, the quality is always the same, horrible.
I really want to be part of VZ but I can't if I am to expect these issues! please help. I don't know if it's congestion or just the call coding itself.

Droid Razr Maxx/Issues with Exchange Sync and Texting

I have a Droid Razr Maxx. Since the KitKat update to 4.4 in May 2014, my Exchange email account will not sync. My Comcast account does. If I power cycle the phone, it will sync the Exchange account for a short time until I receive the following error message: 'couldn't open connection to server due to sec..." When I touch the error message, it just goes away. If there is more of the error message, I'm unable to see it. I have removed the Exchange account and added it back in three times. My IT department indicates they have not made any changes to the security levels, but have fielded several questions from other Android users with the KitKat update. My text messaging service also stopped. I've been reviewing all forums and tried different things, but to no avail. I went to the Verizon store, who just said that there have been 'lots' of complaints about KitKat and that I should buy a different phone. This $200+ phone is only 7 months old. Please help!!

After deleting and adding my Corporate account, visiting the local Verizon store several times, visiting my IT department, and now wiping the phone and re installing all software, the Corporate email still only syncs when I power cycle the phone. We are a BYOD company which means every other phone works with the Exchange account. My phone also worked up until the KitKat update in May 2014. The only recommendation I have received from Verizon is to replace my 8 month old Motorola Razr Maxx with a entirely different phone at full price. The tech I spoke with at Verizon made the statement that she has avoided updating to KitKat given all the customer issues she has had to deal with.
I'm in a technology field and understand when glitches occur, but also expect functionality issues to be addressed. I've been with both Verizon and Motorola for a long time, but very doubtful I will continue this relationship when contract time is up for renewal. I'm carrying my iPad around to get the Corporate emails and the Razr Maxx has been relegated to just being a very expensive phone.

CUCMBE3K Experience and Issues Identified

I have created a list below of issues and experiences whilst working with the CUCMBE3K.
For the purposes of this dialog, I will refer to this particular customer as “CustomerX”.
Part 1: Pre-Sale Engagement Summary
Following true to the Cisco PPDIOO model, the CUCMBE3K was identified as the best fit for the customer requirements, both technically as well as functionality. Apart from the standard hunt groups, the main highlights being the following:
Voicemail-to-Email notifications
Voicemail for all users
Extension Mobility for the bulk of users
Multilevel Auto Attendant
Integrated E1
FXS support for FAX
Paging/auto-answer
The Quick Pricing Tool (QPT) is the recommended Cisco tool to scope and create a CUCMBE3K BoM. And thus, this tool was used. The BoM of which was validated by Cisco Partner Presales and the order was placed.
Issue 1: UCL Licenses arrived in singular form
The first thing I happened to notice whilst I was unpacking the boxes was the quantity of UCL licenses. Yes, I am aware of bundled licenses, and I select those wherever possible, however these were specific to UCL voicemail licenses. Now I am not going to into how archaic the process is of still having to map a license key to a MAC address – I feel this should be done in the backend and not by partners like many other vendors do it – so we will look past this fact. Where I do have a concern is having to spend hours online manually activating UCL Voicemail licenses (restricted to 10 as “bulk” option on the Cisco Online License Tool); only to find out later that the CUCMBE3K itself can only accept 1 license upload at a time – therefore increasing the hours associated to simply applying licenses.
Issue 1 Summary:
UCL Licenses provided in singular form for UCL VM, despite ordering via QPT.
Online license Tool unable to process more than 10 PAK’s at a time;
CUCMBE3K unable to accept more than 1 license at one time
Issue 1 Fixes/Workarounds/Requests
Cisco, please fix QPT to ensure so that when you specify the amount of voicemail users it creates UCL VM bundled sku’s for VM UCL’s
Increase the ability of the Cisco online License Tool to accept more than 10 at a time.
CUCMBE3K team, please provide the ability to select more than one license at a time to import.
Issue 2: Wait time of 15 minutes before CUCMBE3K Web interface responds
Powering on the CUCMBE3K unit; like any engineer you would run a ping to the default IP address to indicate when the device has successfully come up and then you would connect to it via the appropriate management interface. The CUCMBE3K would respond to the ping shortly after start-up, however the web interface was not available. No documentation indicates that the CUCMBE3K actually takes between 15 to 20 minutes to start-up, before it becomes responsive and phones can register.
Issue 2 Summary:
CUCMBE3K takes 15 to 20 minutes to respond after boot-up.
Nowhere is this documented yet when TAC case is logged, it is outlined as normal behaviour
Issue 2 Fixes/Workarounds/Requests:
Be patient
Cisco, please update documentation
CUCMBE3K Team, please look at how this boot-up time can be improved
Issue 3: First Time Wizard Crashes/Issues and Web Interface
As per the CUCMBE3K documentation for version 8.6.3, which is what was shipped with this device. I did not use the “Bulk Import Tool” (which I will get into a bit later) and simply configured the first time wizard for a “single” site. The wizard itself crashed 3 times, where I would be working through it and it would simply hang and stop responding. So I would have to restart the device and then have to wait 15 to 20 minutes before I could try again. You are looking at 1 full hour of sole boot-up time as a result of this – never mind the crashing interface.
I just kept trying and then eventually got through to the “Sites” page within the wizard, which then presented another issue. For some reason the wizard would accept all my entries yet it would not let me proceed past the “Sites” Page. The only way I could get past that “Sites” page was to start the wizard again and then click “next, next, next” for the previous pages (that I had already completed) and then it let me through the “Sites” page.
When I submitted the completion of the wizard, my browser immediately displayed “timeout error”, after which I could no longer connect to default 192.168.1.250. I then tried to connect to the newly assigned IP address. It responded but would not let me log in with either the new or old credentials. I then heard the device restart…assuming that now it had applied my Wizard configurations. I think it would be a good idea to have some sort of progress bar for something like this?
I waited for the unusually long period (20 minutes) before trying to connect and yet this time I could not connect. Even after waiting for over an hour. Ping responses to the newly configured IP address were responding. Yet no Web service was available. I restarted it after waiting for over an hour and half.
After the restart, I waited again for over an hour and yet no luck – I turned it off and I went home for the evening. I had wasted one full day on trying to give this device an IP address and login?
In the morning I powered the device back up and I could then connect to the web interface but could not access the CUCMADMIN page…I kept getting an error page indicating that cucmadmin is not available. After much retrying it eventually let me in and then I could log in for the first time post wizard configuration.
Now that I was in and working on the CUCMBE3K interface, there came a time where I had to log out. When I tried to log back in I received “An error has occurred during authentication. Contact your system administrator.” This seemed to occur regularly and logging-in twice seemed to be the only way to log into the interface (with the same credentials).
I could go on but I think you get the drift.
Issue 3 Summary:
Unstable 8.6.3 Wizard\Web interface
No progress bar for Wizards submission/config application
Issue 3 Fixes/Workarounds/Requests:
Be patient
Upgrading to Version 8.6.4 dramatically improved stability of Web interface (but be careful of country pack backward compatibility – install country pack first before upgrade!!)
Cisco TAC recommend using Firefox – despite it not being listed as a supported browser
Issue 4: All Email address field do not support [email protected]
This particular environment is quarantined, and hence they use a domain of customerXdomain.local.
This is not supported on CUCMBE3K, despite it being a valid email address.
Issue 4 Summary:
No support for *.local on any email fields
Issue 4 Fixes/Workarounds/Requests:
Cisco Bug/Defect has been logged (CSCub81401)
No work around
Issue 5: 7900 Handsets are not configured after changes have been applied to them
Should you make a change to a usage profile and/or speed-dial etc, the affected handset then restarts and upon restart has those configurations applied.
This works fine with the 6900 series handsets however, not with the 7900 series handsets. You have to restart the 7900’s manually for changes to be applied. Not sure if this is related but I also noticed that after a CUCMBE3K restart, the 7900 series handsets did not register automatically. The just sit there indicating “registering”. So you have to manually restart them to get them to register them to the CUCMBE3K device.
Issue 5 Summary:
7900’s do not accept changes applied to them via CUCMBE3K
After CUCMBE3K restart, the 7900’s do not automatically register to the CUCMBE3K. They require a manual reboot. In some cases this was seen to be an intermittent issue i.e sometimes a 7900 handset would in fact register.
Issue 5 Fixes/Workarounds/Requests:
Cisco Bug/Defect has been logged (CSCub81366)
No work around
Issue 6: Cannot assign more than 40 Speed Dials
An error is received when you try to add more than 40 speed-dials to a phone. Despite the phone being a 7975+7916+7916 handset (a tally of 48 speed-dials on the 7916 sidecars alone)
Issue 6 Summary:
Cannot allocate more than 40 Speed Dials to handset despite if the handset can support it.
Issue 6 Fixes/Workarounds/Requests:
Cisco Bug/Defect has been logged (CSCub83528)
No work around
Issue 7: No Call Busy Forward to Voicemail from Huntgroup
There is no option to have a Hunt Group Voicemail. So if no one is available in the hunt group the call will receive an engaged tone. This is a feature typically expected for any current voice platform.
Issue 7 Summary:
No support for Hunt Group VM
Issue 7 Fixes/Workarounds/Requests:
Cisco Bug/Defect has been logged (CSCub83528)
Configure Call-forward to extension with Voicemail configured for hunt group
Issue 8: Extension Mobility Users unregister when not logged in
This was a significant issue with this engagement.
The CUCMBE3K unregisters the EM user when not actively logged into a handset. This means when you call an EM user that is not logged in – you get an engaged tone. Not voicemail as what would be expected.
Issue 8 Summary:
No voicemail support for EM users that aren’t actively logged in
Issue 7 Fixes/Workarounds/Requests: Cisco Bug/Defect has been logged (Bug ID CSCub83528)
Issue 9: Bulk Import Tool
The CUCMBE3K supports a feature/tool called the Bulk Import Tool. Like the name says, it allows one to upload a large portion of user details and phones to the CUCMBE3K instead of manually adding them one by one.
The issue is that in the CUCMBE3K interface, a user configuration has both a “PIN” and a “Password”. The Bulk Import Tool does not have a column or field to specify the “PIN” and thus one has to go to each and every single user manually and configure their PIN.
Issue 8 Summary:
No user “Pin” number support in “Bulk Import Tool”
Issue 7 Fixes/Workarounds/Requests:
Cisco Bug/Defect has been logged (Bug ID CSCub86268)
Manual configuration of each user “Pin” field
Issue 10: Auto Attendant “Dial-by-Extension” Feature issues
It was noted that Dial-by-Extension is not supported for Extension Mobile users as well as Departmental handset.
Issue 10 Fixes/Workarounds/Requests:
Cisco Bug/Defect has been logged (Bug ID CSCuc59234)
No work around
Issue 11: Caller ID –amends user extension to external Caller ID
The CUCMBE3K amends the extension of the user/handset to the caller ID; so for example, if extension 123 (assuming 3 digit extension length) is making an external call to the outside world, the CUCMBE3K will present a Calling Number of 0x xxxx x123 (where x is the numbers of the dial plan)
This presents an issue if that extension number is not present in the number block on the PSTN side. I.e if 0x xxxx x123 is trying to call when the customer numbers purchased on the PSTN service only go up to 0x xxxx x100, the 123 call will fail. As a result you need to add a “Calling Pattern Translation pattern”. However this is not available in the CUCMBE3K interface and thus a Cisco TAC needs to be made
Issue 10 Summary:
No option to configure Calling party translation via CUCMBE3K interface
Issue 10 Fixes/Workarounds/Requests:
Cisco Bug/Defect has been logged (Bug ID CSCuc59156)
Log Cisco TAC
Other Feature limitations
Just some other feature limitation that I thought may be worthwhile listing
Auto Attendant – no multilevel function
No auto-answer is supported despite the handsets supporting it i.e. 6921’s
No paging/intercom is supported
No modification of 7900 background images is supported – despite the 7900 handsets supporting this feature.
There is no file management interface, so no option/ability to manage firmware manually etc.

Brian,
Thanks for being a Cisco partner, working with TAC on resolving some of the issues you faced and taking time to provide feedback.
We have taken the feedback seriously and will work on addressing them in upcoming release.
Sanjay

HP Utility and Scanning issues with Officejet Pro 6830

I purchased a 6830 several weeks ago and have been using it for general wireless printing from my Mac for serveral weeks with no problems. Today I wanted to try scanning, and for the first time brought up the "HP Utility" and noticed that it connects to the printer, but lists the supplies as "Cartidge is missing" for all the cartridges. However, when I go to the front panel of printer and select the "ink" icon, it show that I have all cartridges installed with almost full ink. I perform a "test print" from the printer queue and it prints it fine.
I removed the driver and reinstalled, and got the same results (evern with multiple reboots, and printer power resets)
In addition, when I try to do a ether a scan to computer from the printer, or from the HP Scan utility I get a failure. From the scan utility. Using scan to computer, I select my Mac and the process starts (and a little window pops up on my Mac for a few seconds), but eventually the printer gives a message that it lost contact with the computer.
Yes the "Enable Scan to Computer" box is checked, and there is a green "Scan to Computer Enabled" indicator in the HP Utility window.
I've followed various appropriate trouble shooting guides but nothing appears to work.
Also checked if the Printer Firmware was up to date and it was.
When I connect using the Webinterface to the printer, the productinformation->printer information page show that the cartidges are installed, and "ink guage" has appropriate levels.
Also, webscan does not appear to work, although it pops up an empty pdf page, and I can hear the printer doing something (although not feeding the pages)
HP Utility: 5.22.0
HP Inkjet 4 Driver 4.2.0
OS X : 10.10.1

Hi,
First of all open System Preferences and select Sharing.
Ensure the computer name doe snot include any Non-English or special characters, click on Edit and change it if necesary.
Next clcik the Apple icon and then About This Mac.
Clcik on Software Update and then clcik the top Store Menu.
Select Reload This Page and install any listed HP or Apple Updte if a such exists.
If thwe same persists a such may also happen due to network issues...
What exact error appears while launching a scan from the HP Scan application or from Image Capture?
A such may allow to better understand any possible cause.
As well try enabling wireless direct on your printer and connect the Mac to the printer:
Click the Wireless Direct icon () and turn it on, take a note of its passcode.
From your Mac click the WiFi icon and select the printer's network
Note: if a such is not listed click on Join Other Network and then Show Networks, then it should be listed.
Allow it a moment to connect and try scanning from your Mac, as well try checking the ink levels now.
If those are working as expected, the issue may rely on your home network.
Please clarify your router brand and model, I will do my best to guide you further.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

10.1.3 Production - Strange migration issues with OC4J

Hi,
first of all my congrats on another great release of my favorite Java IDE. Bad thing is I can't enjoy it as much as I want currently because of the following issue:
I'm working on a large project based on Struts, Tiles and Spring. The thing was born under 9.0.3 and happily survived several migrations since. It is running perfectly in 10.1.3 EA (OC4J and Tomcat 5.5). So I didn't expect any issues when switching to the production release. As I expected, everything worked without any errors. Fine. But then, when expectingly starting it in OC4J, things suddenly looked a bit different, for the login page came up somewhat naked. In fact, that is no wonder, as the app didn't find its CSS files, images, whatever. I import those resources (JSP 2.0) via the follówing line:
${pageContext.request.contextPath}/path_to_css.css
As it turned out, the pageContext thing wasn't resolved and so contextPath stays blank. Furthermore, the JSPs generated can't get access to session objects via expression language (eg. ${myBean.myAttribute}. JSTL <fmt:>, on the other hand, works wonderfully. Now for the odd part: if I change the JSP while the app is running and
then hit 'reload' to get it recompiled, the problem is gone. Looking at the .jsps sources, JDev generates something quite different from what OC4J does (the latter is the working version). I've spend the whole day now trying to find out why, including two fresh installs and setting up a test project, for I expected Tiles to be the culprit, but it's not; in fact, the issue also happens with a no-frills JSP page. Now I'm rather at the end of my knowledge. Has anyone had similar problems or knows how to resolve this issue? Any hint would be deeply appreciated :-)
-- Chris.
NB. My version is 10.1.3 J2EE (not Studio); I tried both the base one and later the complete version which comes with its own JDK.

Alas, talking to myself is fun, so I'll proceed. Today, I set up another simple test project (Servlets 2.4/JSP 2.0) with a JSP that just issues the following:
Context path: ${pageContext.request.contextPath}
Upon comparing what gets generated, I noticed the following differences:
1. What JDev generates and what does not work correctly:
javax.servlet.jsp.el.VariableResolver __ojsp_varRes = (VariableResolver)new OracleVariableResolverImpl(pageContext);
try {
out.write(__oracle_jsp_text[0]);
out.write(__oracle_jsp_text[1]);
catch( Throwable e) { .. }
2. The same fragment recompiled in OC4J:
javax.servlet.jsp.el.VariableResolver __ojsp_varRes = (VariableResolver)new OracleVariableResolverImpl(pageContext);
com.evermind.server.http.JspCommonExtraWriter __ojsp_s_out = (com.evermind.server.http.JspCommonExtraWriter) out;
try {
__ojsp_s_out.write(__oracle_jsp_text[0]);
out.write( (java.lang.String)oracle.jsp.runtime.OracleJspRuntime.evaluate("${pageContext.request.contextPath}",java.lang.String.class, __ojsp_varRes, null));
__ojsp_s_out.write(__oracle_jsp_text[1]);
catch( Throwable e) { .. }
As you can see, only the latter version contains code to evaluate the EL expression (the italic parts) at all! How on earth does this come from? Is there any switch in JDev to explicitly tell it to generate 2.0-compliant, EL-aware stuff apart from specifying 2.4 in the wizard?
-- Chris.

Canon S100 RAW color issues

Hello, all. I created a thread with this similar issue a few months ago but never really got it resolved. Instead of reviving an old thread, I decided to just recreate it with updated information.
I have the new Canon S100 and I am having an issue with how the RAW files appear in Lightroom.
I import the photos into a Lightroom catalog and they all look fine within the importer window (which shows essentially what a JPEG would look like), but when I click on the photo in Library or Develop, once the photo finishes loading, the red saturation goes through the roof.
Any photo that already had a little bit of warmth to it exploded with red.
Whereas any photo taken in normal light gains a little more warmth and exposure.
Here are a couple examples of the JPEG preview (also how it looks in-camera) compared with what the RAW looks like once it's been loaded in Lightroom. (The above or left photo is the “normal” version, the bottom/2nd image is the RAW)
It’s sort of difficult to tell with some of the photos by looking at them side-by-side. I also have the individual photos if you want to A/B them to see the changes that are actually occurring.
There are no presets being applied upon import.
The only solution I've found is to convert them all into JPEGs using Canon's software (which does not alter the images as seen above), and edit them in Lightroom as JPEGs, but that completely eliminates the point of buying a camera that is capable of shooting in RAW.
I’ve been having this issue since the S100 first came out (when I purchased it) with Lightroom 3.6RC and was told that it would be fixed in Lightroom 3.6… which it wasn’t… nor was it fixed in Lightroom 4.
I decided to just go ahead and convert all my photos to JPEGs until I found a fix to this so I could at least have my photos (I had photos from my anniversary with my girlfriend in November that I couldn’t do anything with so I was sick of waiting).
I figured I’d wait till more people had the camera, expecting this issue to be more widespread… but now that a lot of people have the S100, I’ve looked around and found no other instances of this happening… so I’m worried it’s something on my end.
I have a 2008 13” MacBook Pro running OSX 10.7.3 and I have the latest version of Lightroom (4.0) and Camera Raw (7.0) installed. I’ve tried the photos in Photoshop CS5 and it does the same thing. When this first happened back in December I tried the photos in Aperture as well and it did the same thing.
The only software that seems to recognize the true color of the photos is Canon’s horrible “professional editing” software.
Thanks in advance.
-Patrick

I recently bought an S100 and encountered the same problem. With Camera Standard in Lightroom, Reds are too bright, greens are shifted towards yellow, and some yellows are shifted towards orange.
I have been using Lightroom since the beta, with different cameras from different manufacturers. The camera profiles for the S100 are the worst I have experienced by far. The profiles, particularly all of the profiles that start with "Camera," do not fit this camera. I believe somebody made a mistake. It could have been someone at Canon, it could have been someone at Adobe. I don't expect this mistake to be fixed, or even acknowledged.
Moving on, here is my workaround:
Start with the Powershot S110 Camera Standard profile.
Use dcpTool to decompile the profile.
Open the decompiled profile in a text editor.
At the top, change the name to S110 Standard.
At the bottom, set the baseline exposure offset to zero.
At the bottom, change the model restriction from S110 to S100
Use dcpTool to compile the modified profile. Give the resulting .dcp file a different name than the original.
Put the new .dcp file in the appropriate directory, open Lightroom and apply the S110 Standard profile to your S100 images.
dcpTool is here:
http://dcptool.sourceforge.net/Introduction.html
This hacked S110 profile gets rid of the blazing reds. It does have some problems with yellows and greens. I solve this in Lightroom by using +20 in Camera Calibration: Green Primary: Hue. I haven't had my camera very long, and I may end up making other adjustments in Lightroom. But using the Powershot S110 Camera Standard profile seems like the best place to start.
I tried using Adobe's DNG Profile Editor app on the S110 "Camera" profiles, but did not get good results. From what others have posted on Adobe's forums, this is to be expected. A lot of the "Camera" profiles are too complicated for DNG Profile Editor to work well on. Both the S100 and S110 Camera Standard profiles have over 23,000 lines of code when decompiled!
I also tried dcpTool (and DNG Profile Editor) with some of the other S series and G series profiles, without finding anything that works better than the S110 Camera Standard profile.

SPRY accordion widget IE8 ONLY issue

hello everybody,
i noticed a strange "jumpy" behavior while using the spry accordion widget -- this affects IE8 only (currently using 8.0.6001.18882 on vista), other browsers (including IE7 and IE8 forced into IE7 mode) work as expected. this issue seems to be related to the margin property of the accordion container...
not shure whether this behavior is related to IE rendering or the spry javascript code itself... anyway i made NO changes to the spry script (my version is 0.15, 1.6.1, which i believe to be most recent one).
the xhtml (strict) and css are perfectly valid (there might be some MINOR css hacks which are not related to the accordion itself). i do NOT use ANY padding on the inner container of the accordion (which would definetely make the spry js count the tween in odd way). the accordions (especially the main menu on the left) are little more complex, but they were built according to the spry widget document, found on the adobe spry website.
so, here it is -- check the accordion on the left side (the bug seems to happen almost always while opening/closing the last BLUE "section" of the accordion, please play with the accordion for a while to reproduce it -- while the accordion closes, it "loses" it's bottom margin (i guess), what's even more wierd, everything gets back to place after you move a mouse):
http://www.prazskematky.cz/home.php
PLEASE NOTICE: since the website is still under development and i'm using a IE meta tag to force it into IE7 rendering, to reproduce this behavior please be shure to switch IE engine to IE8 standards mode
well, we all now how IE handles css... so it's propably an IE bug -- anyway if you have encountered a similar issue of even better found a fix, please let know. (i don't consider a fix switching to another js library, i would like to use the spry, because of it's DW integration)
many thanks,
p.s.

ross m. greenberg wrote:
> Now however the entire .gif is not appearing in the
accordion panel is expanded. I insert the graphic using a standard
"menu insert/graphic/browse and select"
>
> the graphic file is not showing up properly on such an
insert...
Are you referring to what it looks like in Design view? If
so, that's
correct. Accordion panels have a fixed height. From memory, I
think it's
200px. However, if you test the page in a browser, you should
see a
scrollbar automatically generated on panels that have content
that
exceeds the height of the panel.
If you want flexible-height panels in the accordion, you need
to adjust
both the CSS and the script that initializes the accordion. I
have
covered all the details in my "Essential Guide to Dreamweaver
CS3" (and
the forthcoming CS4 edition). You can probably find online
tutorials as
well. Try a Google search for Spry flexible height accordion.
The accordion widget has been around since CS3, and it hasn't
changed in
CS4, so a Google search should bring up a lot of information.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Deserialization issues in CEP environment

Hi,
I'm running Coherence in a CEP environment, though I'm not making use of the CEP API inside the Spring context. The cache is initialized in this most basic way:
CacheFactory.getCache(SomeAbstract.class);
It resides in bundleA, where SomeAbstractBase.class also is. There are several implementations of this base class across multiple bundles, and I would like to make use of Coherence to store these instances.
I was expecting deserialization issues so I figured this would work, but it doesn't. What am I doing wrong here? What is the best approach to do this?
 Map<Long, ClassLoader> classLoaderMap = new HashMap<Long, ClassLoader>();
 public SomeAbstractBase put(SomeAbstractBase so) {
 ClassLoader old = cache.getCacheService().getContextClassLoader();
 try {
 cache.getCacheService().setContextClassLoader(so.getClass().getClassLoader());
 classLoaders.put(so.getId(), so.getClass().getClassLoader());
 return (SomeAbstractBase) cache.put(so.getId(), so);
 } finally {
 cache.getCacheService().setContextClassLoader(old);
 public SomeAbstractBase get(Long id) {
 ClassLoader old = cache.getCacheService().getContextClassLoader();
 try {
 cache.getCacheService().setContextClassLoader(classLoaderMap.get(id));
 return (SomeAbstractBase) cache.get(id);
 } finally {
 cache.getCacheService().setContextClassLoader(old);
 }

Jarell wrote:
Hi Andy,
andypiper wrote:
Setting the CCL of the CacheService is a one-shot deal, it cannot actually be changed once set (you have to shutdown the service and restart to do something different).Completely forgot about this as you mentioned in another thread.
You can also set the bundle CL as the CCL for invocations, but this may not always be necessary.How do I do this? I want it to be flexible enough to accomodate any future implementation that will be deployed in the osgi environment.Implement BeanClassLoaderAware, then when you make the call do something like:
ClassLoader saveCcl = Thread.currentThread().getContextClassLoader();
try {
Thread.currentThread().setContextClassLoader(beanClassLoader);
// do call here
} finally {
Thread.currentThread().setContextClassLoader(saveCcl);
Note that if you are invoking OSGi services then Spring-DM will do this for you if you set the appropriate attribute on the reference definition.
We use hessian in our product which has much the same requirements as you and we actually found that it was difficult to avoid doing DynamicImport-Package: * in the bundle doing the serialization.

Is there any issue in using ABAP Memory ID to exchange between the programs

Hi All,
Do we expect any issues if we use ABAP Memory ID's to exchange the data between different programs?
I was told by my colleagues that, we can expect some unforeseen issues if we use ABAP Memory ID's. These issues could be because of refresh of Memory ID's in the Standard program.
Is that true? Need experts opinion on this question.
Thanks a lot in advance.
Regards,
RSS

I can think of such case only if you pick memory id of some standard name. Anyhow I can't imagine this happens w/o running any standard report on you machine from your custom report. ABAP memory is user dependant so you have your own roll area wherein all run programs can communicate. If you don't run any standard report by means of SUBMIT, you don't have to worry about this aspect either.
Futhermore if you run separate GUI session, or sinmply use /o in same session, you open new external session which gets its own new ABAP memory. So you don't affect your previous one at all.
If you want to be extremely careful, use memory id of some custom, original name i.e. I always use such naming convention NAME_OF_PROGRAM_XXXX where XXX denotes its usage i.e. XXX = 'EMPLOYEES'. If I also don't use SUBMIT I am 100% sure no other program touches/flushes this memory.
Don't believe your collegues and use ABAP memory whenever needed, but always consider context of program and where it lies in the memory. If they persist, please send them here to discuss this matter giving some good reason why they discourage you to do.
BTW: This could be an issue with SAP Memory, but with ABAP no chance.
Regards
Marcin

ASR9K - 4.2.3 to 4.3.4 Upgrade - VRRP Issue

Hello all,
After upgrading 4.2.3 to 4.3.4, when checking the failing config, I found the following issue regarding VRRP:
RP/0/RSP0/CPU0:A9K-LAB02#sh configuration failed startup
Mon May 5 16:24:19.094 WEST
!!15:13:09 UTC Mon May 05 2014
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
router vrrp
interface TenGigE0/0/0/0.3701
address-family ipv4
 vrrp 1
 priority 200
!!% 'vrrp' detected the 'warning' condition 'Virtual MAC already in use on this port'
 timer 1
!!% 'vrrp' detected the 'warning' condition 'Virtual MAC already in use on this port'
 address 200.100.1.100
!!% 'vrrp' detected the 'warning' condition 'Virtual MAC already in use on this port'
End
According to bug CSCed75140, I expect this issue to be solved starting in 4.3.0...
Any idea?
Thx,
Pedro

Pedro,
There must be a missunderstand the bug you quote is to improve the error notification with this unsupported config, it doesn't make the config supported. Some details on this issue from the Release notes of the bug:
Problem Symptom:
In a router running IOS-XR, configuring the same virtual router id(VRID) on
multiple sub-interfaces of the same physical interfaces is NOT supported
for HSRP/ VRRP
Workaround:
Use different virtual router id for the different sub-interfaces of same
physical interface
Further Problem Description:
Example of unsupported config:

router vrrp
interface GigabitEthernet0/5/0/38.175
vrrp 1 ipv4 10.186.0.1
interface GigabitEthernet0/5/0/38.176
vrrp 1 ipv4 10.186.0.9

If you have two groups configured with the same virtual router id, this means
that they have the same virtual MAC address (as this is derived from the
virtual router ID). When VRRP is in Master state, it installs an entry for
it's virtual MAC in to the MAC filter for the interface over which it is
running. However, it is not possible to program the MAC filter per
sub-interface. Therefore if VRRP is running over a sub-interface it is the MAC
filter of the underlying physical interface which is actually programmed
(although VRRP has no way of being aware of this). If using the unsupported
configuration, you have two Master groups with the same virtual MAC address on
sub-interfaces of the same physical interface. In this case there will only be
one MAC address installed in the filter of the physical interface. When one of
these groups is removed by configuration or it transitions out of Master
state, it removes its virtual MAC address from the MAC filter of the
underlying physical interface meaning there is now no MAC address installed at
all and the VRRP feature for the remaining Master group will no longer
work. The root cause of the problem is that the MAC filter cannot be
programmed per sub-interface.

Un-Expected Logoff Issue

Similar Messages

Maybe you are looking for