Un-Used tablespace in Database
hi,
I want to find the list of tablespace in my database which is not used at any point. i have listed below the scenarios where i need to avoid those tablespace
1. I have a tablespaces in my database in which my application creates index in run time and drops it. i need to avoid those tablespace.
2. Each user may have separate UNTOTABLESPACE. i need to avoid those tablespace in my query.
i am using the below query right now to find the list of tablespace which is not used in my database. But my below query does not satisfy the above two conditions.
SELECT NAME UNUSED_TABLESPACE
FROM v$tablespace
WHERE NAME NOT IN (SELECT default_tablespace
FROM dba_users)
AND NAME NOT IN ('UNDOTBS1')
AND NAME NOT IN (SELECT tablespace_name
FROM dba_ts_quotas)
AND NAME NOT IN (SELECT tablespace_name
FROM dba_segments)
AND NAME NOT IN (SELECT temporary_tablespace
FROM dba_users)
regards,
007
007 wrote:
hi,
I want to find the list of tablespace in my database which is not used at any point. i have listed below the scenarios where i need to avoid those tablespace
1. I have a tablespaces in my database in which my application creates index in run time and drops it. i need to avoid those tablespace.
2. Each user may have separate UNTOTABLESPACE. i need to avoid those tablespace in my query.
i am using the below query right now to find the list of tablespace which is not used in my database. But my below query does not satisfy the above two conditions.
SELECT NAME UNUSED_TABLESPACE
FROM v$tablespace
WHERE NAME NOT IN (SELECT default_tablespace
FROM dba_users)
AND NAME NOT IN ('UNDOTBS1')
AND NAME NOT IN (SELECT tablespace_name
FROM dba_ts_quotas)
AND NAME NOT IN (SELECT tablespace_name
FROM dba_segments)
AND NAME NOT IN (SELECT temporary_tablespace
FROM dba_users)
regards,
007DUPLICATE Thread
Re: Identifying un-used tablespace in database
Handle: 007
Status Level: Newbie (25)
Registered: Sep 6, 2010
Total Posts: 192
Total Questions: 108 (98 unresolved)
why so many unresolved questions?
Similar Messages
-
Is Oracle Expert tool still used in Oracle database 11g?
Is Oracle Expert tool still used in Oracle database 11g?
!exp help=yes
Export: Release 11.2.0.1.0 - Production on Sat May 8 08:17:06 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
You can let Export prompt you for parameters by entering the EXP
command followed by your username/password:
Example: EXP SCOTT/TIGER
Or, you can control how Export runs by entering the EXP command followed
by various arguments. To specify parameters, you use keywords:
Format: EXP KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
Example: EXP SCOTT/TIGER GRANTS=Y TABLES=(EMP,DEPT,MGR)
or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
USERID must be the first parameter on the command line.
Keyword Description (Default) Keyword Description (Default)
USERID username/password FULL export entire file (N)
BUFFER size of data buffer OWNER list of owner usernames
FILE output files (EXPDAT.DMP) TABLES list of table names
COMPRESS import into one extent (Y) RECORDLENGTH length of IO record
GRANTS export grants (Y) INCTYPE incremental export type
INDEXES export indexes (Y) RECORD track incr. export (Y)
DIRECT direct path (N) TRIGGERS export triggers (Y)
LOG log file of screen output STATISTICS analyze objects (ESTIMATE)
ROWS export data rows (Y) PARFILE parameter filename
CONSISTENT cross-table consistency(N) CONSTRAINTS export constraints (Y)
OBJECT_CONSISTENT transaction set to read only during object export (N)
FEEDBACK display progress every x rows (0)
FILESIZE maximum size of each dump file
FLASHBACK_SCN SCN used to set session snapshot back to
FLASHBACK_TIME time used to get the SCN closest to the specified time
QUERY select clause used to export a subset of a table
RESUMABLE suspend when a space related error is encountered(N)
RESUMABLE_NAME text string used to identify resumable statement
RESUMABLE_TIMEOUT wait time for RESUMABLE
TTS_FULL_CHECK perform full or partial dependency check for TTS
VOLSIZE number of bytes to write to each tape volume
TABLESPACES list of tablespaces to export
TRANSPORT_TABLESPACE export transportable tablespace metadata (N)
TEMPLATE template name which invokes iAS mode export
Export terminated successfully without warnings. -
Can I use RMAN transportable database cross platform from 10g to 11g?
Hi,
I'm working on the migration plan, the source db server is solaris with 10g database while the destination server is AIX with 11g database.
Can I use RMAN transportable database for this purpose?
Coz I have read the restrictions on Cross-Platform Transportable Database, but it does not mention whether it can work for different version of database.
please help.Hi,
Do you have metalink account? If yes please check : Cross-Platform Migration on Destination Host Using Rman Convert Database [ID 414878.1]*
RMAN Cross-Platform Transportable Databases and Tablespaces
Thank you -
Encryption Scheme used by Oracle Database
Dear Experts,
I am doing research on database security. I need some help and guidelines.
1. Which Encryption scheme Oracle use to secure database?
2. How can be keep safe data from database administrator?
3. Is database security depends on Operating System?
Regards,
Shah JehanThe docs are at http://tahiti.oracle.com.
There are many different things you can secure and many different ways to secure them.
What is missing from your inquiry is a version number.
Here are some links to encryption related technologies:
http://www.morganslibrary.org/library.html
Look up:
Data Pump -- secure your exports
DBMS_CRYPTO -- secure your data
Net Services -- secure network transmission
RMAN -- secure backups
SecureFiles -- encrypt data
Tablespaces -- encrypt data
Transparent Data Encryption -- encrypt data
Not one of them has anything to do with Advanced Compression so why did you post your inquiry here?
Please do not respond in this thread but, instead, post a new thread in "Database - General" where your inquiry belongs.
Thank you. -
Default block size used for Apex Database
Hello all,
I was wondering if anyone has an idea on the default block size that is used for the database that ApEx uses?
Cheers!
SteveThe block size is determined by the Database installation and Tablespace configuration and not by APEX, and the default in the database installation is the OS block size I believe.
Are you talking about the XE database installation?
-Richard -
How to use a Logical Database in Function Module.
Hi Experts,
I want to use a logical database in a Function Module to fetch data from a standard SAP table into a Internal table for certain filter conditions.
How can I get get this done????
I called LDB_PROCESS FM in my FM, but I could not figure out how to store the extract in my IT table since we cant use GET in FM.
Please provide me a sample code if possible.
Thanks in Advance,
Alex.Hi,
i had an example program like this ,in this i want to get the data using pnp logical database with 5 fields in an interface program.
data: begin of it_final occurs 0,
pernr like pa0002-pernr,
vorna like pa0002-vorna,
nachn like pa0002-nachn,
usrid like pa0105-usrid,
usrid_long like pa0105-usrid_long,
end of it_final.
get pernr.
clear : p0000,p0002,p0105.
rp-provide-from-last p0000 space p_date p_date.
if p0000-stat2 = '3'.
v_pernr = pnppernr-low.
else.
reject.
endif.
*---Get employee pernr, First name ,Last name into final table
rp-provide-from-last p0002 space p_date p_date.
if pnp-sw-found = '1'.
it_final-pernr = p0002-pernr.
it_final-vorna = p0002-vorna.
it_final-nachn = p0002-nachn.
else.
*---Error message if not infotype 0002 maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-EMI '0002'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
**--Get SYSTEM USERNAME to final table
rp-provide-from-last p0105 0001 p_date p_date.
if pnp-sw-found = '1'.
it_final-usrid = p0105-usrid.
else.
*---Error message if not SYSTEM USERNAME maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-003 '0105'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
**--Get Email ID to final table
rp-provide-from-last p0105 0010 p_date p_date.
if pnp-sw-found = '1'.
it_final-usrid_long = p0105-usrid_long.
else.
*---Error message if not Email ID maintained
T_ERROR-PERNR = pnppernr-low.
CONCATENATE TEXT-004 '0105'
INTO T_ERROR-MESSAGE SEPARATED BY SPACE.
APPEND T_ERROR.
CLEAR T_ERROR.
endif.
append it_final.
clear it_final.
reward points if useful,
venkat. -
"Connection is closed" closed error while using MS Access database
We are using MS Access database in our project. Recently the database was upgraded to 2000.
After upgrading the database, I get the folowing error when getAutoCommit() is called on a connection -
java.sql.SQLException: Connection is closed
at sun.jdbc.odbc.JdbcOdbcConnection.validateConnection(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcConnection.getAutoCommit(Unknown Source)
The connection is not closed explicity before getAutoCommit() is called, only the statement is closed.
This error is sporadic and occurs under load scenario only (when a lot of connections are open). Once the error occurs, all the database calls fail then onwards. The error was not occuring before the database was upgraded.
I suspect the jbdc-odbc driver. The driver might not be compatible with Access2000 database. Under load scenario, it might be closing connections automatically.
Has anybody faced similar problem before? Where can I find the compatible jdbc-odbc driver? And how to ensure that it is jdbc-odbc driver problem only?
The database verison - MS Access 2000
Java version - 1.3.1_01can i just point out that there is no support for transactions in Access so I wonder why you are calling autoCommit methods at all...
-
How to use your own database with your users to authenticate in a Web app?
Hello, everybody!
I'm starting to write my first web application and I'm going to use JSF, JPA and EJB3 in this application. One of the first things that I have to do on it is the authentication part where I'll have a page with a user name and a password for the user to login. So, as I'm new to all this in Java (I've already implemented this on .NET in the past), I was studying the Java EE 5 Tutorial, especifically the section "Example: Using Form-Based Authentication with a JSP Page". But I saw that the users that the sample application uses come from the file realm on the Application Server. The users are created there and assigned a name, a password and a group. After the users are in the Application Server we can simply uses forms authentication declaratively in the deployment descriptor (web.xml).
But the problem is that this doesn't work to me as I already have my own database with my users, so I want to use it instead of having to create the users on the Application Server.
So, I'm asking you how to do that. Of course I'm not expecting that you place the code here to me as I know that such a thing could be complicated. Instead, I'm asking if you know about some tutorial, article, book or something that teaches how to do what I want. But I would like to see theses examples using JSF and/or EJB3 because these are the technologies that I'm using to develop. It's a pity that the Java EE 5 Tutorial doesn't have an example using a custom database as I know that this situation is very common in the majority of web sites.
Thank you very much.
MarcosFrom memory, it goes like this... You just create a
raw jdbc connection on your user database using a
special "login" DB user account, which has
permissions only to an "authenticate" stored query,
which accepts two arguments: username & password, and
returns a boolean 0 or 1 rows found.When I implemented this in .NET's ASP.NET I had the same solution. I had an special user created in the database that I used to log in. When the real user entered his username and password I was already logged in and I had just to check his username and password agains the right table in my database.
But that was only possible bacause when I connected to the database using my hidden user, I used the rights APIs in ASP.NET that coordinate the authentication process. This means that before login in, no one could access any resources (pages, atc...). So what I'm saying is that I can't manager this manually in Java. Java has to have some API or whatever to allow me to control the login process programmatically, while letting the Application Server control the access to the resources. -
What is the use of 'ALTER DATABASE CLOSE'?
Hello Everybody,
SQL*Plus: Release 10.1.0.2.0 - Production on Ma Aug 15 21:28:30 2005
Copyright © 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> conn / as sysdba
Connected.
SQL> startup force
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> select status from v$instance;
STATUS
OPEN
SQL> alter database close;
Database altered.
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16196: database has been previously opened and closed
If i have to shutdown the instance and database then
WHAT IS THE USE OF 'ALTER DATABASE CLOSE' ?
I need explanation. Why should i shutdown?
Dont give me this answer.
ORA-16196: database has been previously opened and closed
Cause: The instance has already opened and closed the database, which is allowed only once in its lifetime.
Action: Shut down the instance.If you read the documentation you will see that there is no ALTER DATABASE CLOSE command.
This is an undocumented Oracle command, which we are not supposed to use. Consequently we are not allowed to complain about the way that it works. Instead we're supposed to use SHUTDOWN IMMEDIATE.
Cheers, APC -
How to use Forms Default Database Connection in java class
When a form based application is started, a connection is made with underlying database. This is the Default (Primay) Database Connection.
The problem is I have some of my business logic implemented in a java class. In this class I have to make a another connection with the same database. What I want to do is to use the original Database Connection in the java class. In this I may avoid the overhead of reconnection.
Could anyone pls guide me in this way...you can't share the forms connection. Sorry :(
-
Using one Itunes database across two macs
Using one itunes database across two macs
I currently run a 2010 MBP (500gb hd) at home and on the road and a 2013 Imac (1Tb hd) at work. I have a large lossless itunes library of about 300gb and would like to increase the library further.
My MBP started running slowly and I realised that my iTunes library was choking the whole computer. I started to explore ways to store my library on a remote disk and bought a G drive 1Tb portable drive.
My efforts to carry out the transfer were only partially successful with most of my library transferring but a significant number of tracks displaying the ! sign which means they couldn't be located.
I have also got an Imac at work and what I had hoped to achieve was to have my iTunes database on the 1tb portable drive and use the portable disk on both my MBP and iMac.
Our technical support company are dubious about whether this will work because the local specific itunes library data on each machine will differ and each machine will not operate correctly with the underlying data on the portable drive.
I am not very technical and I am finding it difficult to follow the various posts on this board and elsewhere. Many seem to comment on splitting their library across multiple disks but I cant really seem to get to the bottom of storing my library on one disk and using it across multiple computers.
Is what I am trying to achieve practical?
If it is, can someone point me to an article/post please? Or alternatively could someone explain how I might achieve my goal.
Thanks in a advance for your help.Here you go.
http://lifehacker.com/software/itunes/ultranewb--how-to-move-your-itunes-library -to-an-external-drive-238296.php -
Can I use two different database with DBSystemLoginModule?
Finally I can login with Database user id by DBSystemLoginModule on Embedded oc4j server.
But I confused between [b]jazn-data.xml and system-jazn-data.xml.
Which xml do I have to edit for jdbcUrl and jdbcDriver?
Now I would like to use two different database(such as only sid is different).
In this case I want to show specific database name as realm name.
What should I do?
When I use DBSystemLoginModule, I edit JdbcUrl in system-jazn-data.xml.
So can I pass the parameter for sid programmatically?
And also I tried to run my application with other database with DBSystemLoginModule on Embedded oc4j server.
I changed few things(jdbcUrl at system-jazn-data.xml,jazn-data.xml in embedded-oc4j-server/config and database connection for BusinessComponents at Project Properties of Model/ViewController.
But I got some error.
Did I miss something?
----< my error messgae >------
500 Internal Server Error
JBO-30003: The application pool (customer.model.datamodel.CMAppModuleLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002) Message was edited by:
Message was edited by:
sdcsdcI think I understand now, you are modifing the custom login modules configuration within the system-jazn-data.xml file. This is a bit dangerous! Didn't you register the login module in your orion-application.xml? For example, this is the way I do it:
<web-module id="customProv-web" path="customProv-web.war" />
<persistence path="persistence" />
<!--data-sources path="./data-sources.xml"/-->
<security-role-mapping name="sr_developer">
<group name="developers" />
</security-role-mapping>
<security-role-mapping name="sr_manager">
<group name="managers" />
</security-role-mapping>
<jazn provider="XML">
<property name="custom.loginmodule.provider" value="true"/>
<property name="role.mapping.dynamic" value="true"/>
<property name="role.compare.ignorecase" value="true"/>
</jazn>
<!-- Configuring a Login Module in an Application EAR file. -->
<jazn-loginconfig>
<application>
<name>customProv</name>
<login-modules>
<login-module>
<class>oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule</class>
<control-flag>required</control-flag>
<options>
<option>
<name>data_source_name</name>
<value>jdbc/OracleDS2</value>
</option>
<option>
<name>roles_fk_column</name>
<value>userName</value>
</option>
<option>
<name>table</name>
<value>userinfo</value>
</option>
<option>
<name>groupMembershipTableName</name>
<value>groupinfo</value>
</option>
<option>
<name>groupMembershipGroupFieldName</name>
<value>role</value>
</option>
<option>
<name>usernameField</name>
<value>userName</value>
</option>
<option>
<name>user_pk_column</name>
<value>username</value>
</option>
<option>
<name>passwordField</name>
<value>passWord</value>
</option>
</options>
</login-module>
</login-modules>
</application>
</jazn-loginconfig>
<log>
<file path="application.log" />
</log>
<namespace-access>
<read-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</read-access>
<write-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</write-access>
</namespace-access>
</orion-application> -
How can I use an Express database build with RAA in Express Objects???
Hello, everybody!
I have installed Express Server and Client on my computer. I've build an Express database With Relational Access Manager mapping data from an Oracle database.
Now I want to use this express database in Oracle Express Objects.
I understand that an express database build with understand can be used by defining a connection to Express Server and using the option Relational Access Manager Connection.
But, I didn't understand the settings of this option. I open the settings window and there it is :
- the MASTER DATABASE Box where I have to write the name of the CUBE from the express database build with understand?
- the RDC File Box : what do I have to write here? I've read the HELP but I didn't understood. There is no file with the RDC extension in my computer.
Thank you for your help!
Anca.
[email protected]you can extend it, very easly, with an Airport Express.
once you connect the AExpress, on the App Airport Utility, in Wireless tab choose to "Extent a Network", you will be able to select your Network enter your Network Password and it is done
i have 2 AExpress to extend my signal and also to Airplay to Remote Speakers and works perfectly
good luck -
Anybody using 11g RAC Database with OIM 9.1.0.2?
Hi,
We have poor performance problems with 11g RAC Database with OIM 9.1.0.2.
It looks like the issue could be because of RAC Ccluster.
Anybody using 11g RAC Database with OIM 9.1.0.2?
If so, What is the JDBC Driver r u using? Also what App Server (Weblogic or OAS etc) ?
Appreciate your input.
Regards
Vijay ChinnasamyWe are using weblogic 10.3. And I am sorry to tell you that we are yet to move to production.
We are planning to have Database in RAC, so i just thought of taking inputs from you.
can you tell me under what operations you face the poor performance issue?
For us the max no. of users in production is around 6k. So I am wondering how this RAC availability will affect the performance.
Thanks for sharing your inputs. -
DBCA can not use ASM for database storage due to following reason: Could no
Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advanceThanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks
Maybe you are looking for
-
I would like to sync the contents of my new mac-mini to my macbook pro. How can I do this "on the cheap"? I see the migration tool doesnt do that... thanks so much... Steve PS-The min is OS 10.5x the Macbook is OS 10.4.11
-
Opening Document Library Files in New Tab
Hi, Is there any setting to enable so that all the files saved in the document library (PDF, WORD etc) gets opened in a new tab. Now its opening in the same tab. I need all other links to open in the same tab, only documents to a different tab. I am
-
My Time Machine backs up to Time Capsule which cannot be encrypted. I also have confidential data in an encrypted sparse bundle disk image in my home folder. When TM backs up and the encrypted sparse bundle disk image is mounted and I'm accessing the
-
How to define a client in sap?
hi experts can u help me for this
-
Finding all portlet instances used in a specific page group?
Is there a way of retrieving all the unique portlet instance ID's (reference path) used in a specific page group???