Unable to Access AT&T Network

I set up my AT&T account and my iPad shows AT&T in the upper left hand corner with all of the bars. WIFI works fine but when I try to access the internet without WIFI, I get the unable to connect with the server message. Any thoughts?

The same thing happened 2 me yesterday. I called Apple bc I didn't want 2 mess up a brand new iPad! They had me go 2 settings & under general, touch reset. When my iPad came back on there was an "E" after the bars & "AT&T". Was the right fix! Have been using the 3G with no problem since!

Similar Messages

  • I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown. Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching f

    I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
    Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
    Prior to updating to iOs 6.3.1 my system worked perfectly.
    Can anybody help please.

    1. Turn off router for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know).  What gives?  It works fine when the PC is off.

    Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of).  What gives?  When the PC is turned off, everything is totally fine.  I\m stumped. 

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    I suspect a problem with your router. Try changing the security. First use no security as a test.
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Unable to access certain sites- network prefences help?

    I'm having issues connecting to certain websites with 'unusual' top level domains like .me or .tv sites. For example, when I try to visit the site www.formspring.me I get the message "Firefox can't establish a connection to the server at www.formspring.me." (I get the same error on Safari) Now, I can access Formspring via a proxy site, which makes this seem like Formspring is being blocked via a firewall, except I have no firewall set. I spoke with my internet provider (Verizon) and they are useless.
    I'm operating on Mac OSX 10.5.8. I have no firewall set on my router, and haven't touched any Network settings that I know of. Any suggestions? Help?

    Ok, I tried that and I still get the error "Unable to Connect."
    I've tried using my laptop on other internet connections (at my friend's house, at work, at Starbucks) and I still get the "Unable to Connect" when i attempt to open sites that end in .me or .tv
    I called Apple and they didn't do anything- they kept saying it was my router's problem, but since I've tried other internet connections I think it's my laptop's issue.

  • Unable to access localhost from network

    I can not access main page from other computers of the network. the ip of main computer is http://192.168.1.8:5050/examples/servlets/index.htmlwhen i put in connection specs of my browser then i can see it but unable to interact with database as message appears: " Connection refused "
    any help please

    I can not access main page from other computers of
    the network. the ip of main computer is
    http://192.168.1.8:5050/examples/servlets/index.
    html
    This looks like a Private IP address to me: 192.168.1.8. Pls see here for more info. http://en.wikipedia.org/wiki/Private_network
    Unless your Gateway (router) is configured to map and relay private IPs, it may not be accessible from outside. Note- looking up by hostname may still be possible from external machine, in which case your DNS will return a public IP for the hostname.
    Also ensure your firewall (if, any, e.g. Windows XP default) allows you to access port 5050 from external machine.
    -BJ

  • Remote Access VPN - Unable to Access LAN / Inside Network

    Hi,
    I am facing a problem with Cisco ASA remote access VPN, the remote client is connected to VPN and receiving IP address but the client is not able to ping or telnet any internal network.
    I have attached running configuration for your reference. Please let me know I miss any configuartion.
    FW : ASA5510
    Version : 8.0
    Note : Site to Site VPN is working without any issues
    Thanks
    Jamal

    Hi,
    Very nice network diagram
    Are you saying that originally the VPN Client user is behind the Jeddah ASA?
    If this is true wouldnt it be wiser to just use the already existing L2L VPN between these sites?
    In real situation I think the VPN Client would only be needed when you are outside either Head Quarter or Jeddah Network. And since you tested it infront of the ASA and it worked there shouldnt be any problem.
    Now to the reason why the VPN Client isnt working from behind the Jeddah ASA.
    Can you check that the following configuration is found on the Jeddah ASA (Depending on the software level of the ASA the format of the command might change. I'm not 100% sure)
    isakmp nat-traversal To enable NAT traversal globally, check that ISAKMP is enabled (you can enable it with the isakmp enable command) in global configuration mode and then use the isakmp nat-traversal command. If you have enabled NAT traversal, you can disable it with the no form of this command.
    isakmp nat-traversal natkeepalive
    no isakmp nat-traversal natkeepalive
    Syntax Description
    natkeepalive
    Sets the NAT keep alive interval, from 10 to 3600 seconds. The default is 20 seconds.
    Defaults
    By default, NAT traversal (isakmp nat-traversal) is disabled.
    Command Modes
    The following table shows the modes in which you can enter the command:
    Command Mode
    Firewall Mode
    Security Context
    Routed
    Transparent
    Single
    Multiple
    Context
    System
    Global configuration
    Command History
    Release
    Modification
    Preexisting
    This command was preexisting.
    7.2(1)
    This command was deprecated. The crypto isakmp nat-traversal command replaces it.
    Usage Guidelines Network Address Translation (NAT), including Port Address Translation  (PAT), is used in many networks where IPSec is also used, but there are a  number of incompatibilities that prevent IPSec packets from  successfully traversing NAT devices. NAT traversal enables ESP packets  to pass through one or more NAT devices.
    The security appliance supports NAT traversal as described by Version 2  and Version 3 of the IETF "UDP Encapsulation of IPsec Packets" draft,  available at http://www.ietf.org/html.charters/ipsec-charter.html, and NAT traversal is supported for both dynamic and static crypto maps.
    This command enables NAT-T globally on the security appliance. To disable in a crypto-map entry, use the crypto map set nat-t-disable command.
    Examples
    The following example, entered in global configuration mode, enables  ISAKMP and then enables NAT traversal with an interval of 30 seconds:
    hostname(config)# isakmp enable
    hostname(config)# isakmp nat-traversal 30
    - Jouni

  • After update 4.2.1 unable to access mobile data network

    Hello,
    yesterday, i have updated to 4.2.1
    Today, i have activated the flight modus for a while...
    Then go back into the normal modus (flight modus off). Now, the access to the mobile data network is never possible. Access via WIFI is allways ok.
    Now, i have made the same with a second 3GS with 4.2.1 and the problem is reproducible. Message > " mobile data network could not be activated "
    thanks in advance for help...
    Th

    Settings>General>Reset>Reset Network Settings...see if that helps.

  • Unable to access Mac over network

    For some reason I am having problems connecting to my G4 from my Intel iMac. When I go to the Network icon in my sidebar, I get an error message that comes up when attempting to connect to my G4. The proper name for the G4 is G4Drive. This is how I named it in the G4 Sharing prefs. For some reason the old name is still showing up as well (G4hd). Are there some cache files or pref files I should trash, or is there some kind of database that I have to rebuild?
    By the way, accessing the G4 from my Dell PC works fine.
    Jul 1 20:13:47 iMac automount[209]: Cannot mount URL 'afp://G4Drive.local.' for /Network/My Network/G4Drive (UI not allowed).
    Jul 1 20:13:47 iMac automount[209]: Attempt to mount /Network/My Network/G4Drive returned 1 (Operation not permitted)
    Jul 1 20:13:47 iMac automount[209]: Cannot mount URL 'afp://G4-Tower.local.' for /Network/My Network/G4 Tower (UI not allowed).
    Jul 1 20:13:47 iMac automount[209]: Attempt to mount /Network/My Network/G4 Tower returned 1 (Operation not permitted)
    Jul 1 20:13:47 iMac automount[209]: Cannot mount URL 'smb://WORKGROUP;G4HD' for /Network/My Network/G4Hd (UI not allowed).
    Jul 1 20:13:47 iMac automount[209]: Attempt to mount /Network/My Network/G4Hd returned 1 (Operation not permitted)
    Jul 1 20:15:12 iMac kernel[0]: AFP_VFS afpfs_mount: /Volumes/G4 HD, pid 749
    Jul 1 20:15:13 iMac kernel[0]: AFP_VFS afpfs_Reconnect: doing reconnect on /Volumes/G4 HD
    Jul 1 20:15:13 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
    Jul 1 20:15:13 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
    Jul 1 20:15:19 iMac kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA retry for /Volumes/G4 HD delayCnt 6
    Jul 1 20:15:19 iMac KernelEventAgent[32]: tid 00000000 received VQ_NOTRESP event (1)
    Jul 1 20:15:19 iMac KernelEventAgent[32]: tid 00000000 type 'afpfs', mounted on '/Volumes/G4 HD', from 'afp_3XUpkQ000dAH0000oM0000VU-1.2e00000b', not responding
    Jul 1 20:15:19 iMac KernelEventAgent[32]: tid 00000000 found 1 filesystem(s) with problem(s)
    Jul 1 20:15:23 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
    Jul 1 20:15:23 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
    Jul 1 20:15:33 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
    Jul 1 20:15:33 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
    Jul 1 20:15:43 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
    Jul 1 20:15:43 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
    Jul 1 20:15:53 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/G4 HD
    Jul 1 20:15:53 iMac kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/G4 HD failed 61.
    Jul 1 20:15:55 iMac KernelEventAgent[32]: tid 00000000 unmounting 1 filesystems
    Jul 1 20:15:56 iMac kernel[0]: AFP_VFS afpfs_unmount: /Volumes/G4 HD, flags 524288, pid 32

    Two things that might work/help...
    #1 In Finder>Preferences>Sidebar, toggle the Show Network Icon" OFF, then reboot and turn it back on.
    #2 In Finder do a CMD+k, type in afp://ip.of.g4.num
    (assuming Personal File Sharing is on as well as Windows Sharing on the G4)

  • System hanged, unable to access it thru network or directly.

    Hi,
    We have IBM X-Series Servers. Oracle Enterprise Linux 5.3 is installed over it..
    Sytem is running for last 1 yr, suddenly it ihanged as if it is disconnected , we tried to access it but failed , as display is not coming on monitor like blank screen.
    I turn it off and restarted, it worked fine.
    But /var/log/messages or dmesg shows the following...
    Jan 16 04:02:03 ahcdb syslogd 1.4.1: restart.
    Jan 16 04:02:03 ahcdb nmbd[11744]: Got SIGHUP dumping debug info.
    Jan 16 04:02:03 ahcdb nmbd[11744]: [2011/01/16 04:02:03, 0] nmbd/nmbd_workgroupdb.c:dump_workgroups(282)
    Jan 16 04:02:03 ahcdb nmbd[11744]: dump_workgroups()
    Jan 16 04:02:03 ahcdb nmbd[11744]: dump workgroup on subnet 172.16.0.56: netmask=255.255.255.192:
    Jan 16 04:02:03 ahcdb nmbd[11744]: MYGROUP(1) current master browser = AHCTST
    Jan 16 04:02:03 ahcdb nmbd[11744]: AHCDB 40819a03 (Samba Server Version 3.0.33-3.7.el5)
    Jan 16 04:02:03 ahcdb nmbd[11744]: AHCTST 40849a03 (Samba Server Version 3.0.33-3.7.el5)
    Jan 18 10:09:56 ahcdb syslogd 1.4.1: restart.
    Jan 18 10:09:56 ahcdb kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Jan 18 10:09:56 ahcdb kernel: Linux version 2.6.18-128.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 08:45:05 EST 2009
    Jan 18 10:09:56 ahcdb kernel: Command line: ro root=LABEL=/ rhgb quiet
    Jan 18 10:09:56 ahcdb kernel: BIOS-provided physical RAM map:
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 0000000000100000 - 00000000bff4b380 (usable)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 00000000bff4b380 - 00000000bff57b40 (ACPI data)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 00000000bff57b40 - 00000000c0000000 (reserved)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    Jan 18 10:09:56 ahcdb kernel: BIOS-e820: 0000000100000000 - 0000000840000000 (usable)
    Jan 18 10:09:56 ahcdb kernel: DMI 2.4 present.
    Jan 18 10:09:56 ahcdb rpc.statd[4965]: Version 1.0.9 Starting
    Jan 18 10:09:57 ahcdb rpc.statd[4965]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 12 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 32 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 16 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 60 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 13 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 33 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 17 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 61 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 14 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 34 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 18 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 62 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 15 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 35 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 19 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: PXM 0 -> APIC 63 -> Node 0
    Jan 18 10:09:57 ahcdb kernel: SRAT: Node 0 PXM 0 0-c0000000
    Jan 18 10:09:57 ahcdb kernel: SRAT: Node 0 PXM 0 0-840000000
    Jan 18 10:09:57 ahcdb kernel: Bootmem setup node 0 0000000000000000-0000000840000000
    Jan 18 10:09:57 ahcdb kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
    Jan 18 10:09:57 ahcdb kernel: disabling kdump
    Jan 18 10:09:57 ahcdb kernel: ACPI: PM-Timer IO Port: 0x588
    Jan 18 10:09:57 ahcdb hcid[5065]: Bluetooth HCI daemon
    Jan 18 10:09:57 ahcdb sdpd[5069]: Bluetooth SDP daemon
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x0c] enabled)
    Jan 18 10:09:57 ahcdb hcid[5065]: Register path:/org/bluez fallback:1
    Jan 18 10:09:57 ahcdb kernel: Processor #12 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #32 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #16 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x3c] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #60 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0d] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #13 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x21] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #33 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x11] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #17 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x3d] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #61 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #14 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x22] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #34 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #18 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x3e] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #62 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0f] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #15 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x23] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #35 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
    Jan 18 10:09:57 ahcdb pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
    Jan 18 10:09:57 ahcdb kernel: Processor #19 6:15 APIC version 20
    Jan 18 10:09:57 ahcdb kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x3f] enabled)
    Jan 18 10:09:57 ahcdb kernel: Processor #63 6:15 APIC version 20
    Jan 18 10:09:58 ahcdb hidd[5206]: Bluetooth HID daemon
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb automount[5237]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
    Jan 18 10:09:58 ahcdb kernel: ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
    Jan 18 10:09:58 ahcdb kernel: IOAPIC[0]: apic_id 15, version 32, address 0xfec00000, GSI 0-23
    Jan 18 10:09:58 ahcdb kernel: ACPI: IOAPIC (id[0x10] address[0xfecff000] gsi_base[24])
    Jan 18 10:09:58 ahcdb hpiod: 1.6.7 accepting connections at 2208...
    Jan 18 10:09:58 ahcdb kernel: IOAPIC[1]: apic_id 16, version 17, address 0xfecff000, GSI 24-26
    Jan 18 10:09:58 ahcdb kernel: ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[27])
    Jan 18 10:09:58 ahcdb kernel: IOAPIC[2]: apic_id 14, version 17, address 0xfec01000, GSI 27-62
    Jan 18 10:09:58 ahcdb kernel: ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[63])
    Jan 18 10:09:58 ahcdb kernel: IOAPIC[3]: apic_id 13, version 17, address 0xfec02000, GSI 63-98
    Jan 18 10:09:58 ahcdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 18 10:09:58 ahcdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 high edge)
    Jan 18 10:09:58 ahcdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    Jan 18 10:09:58 ahcdb kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jan 18 10:09:58 ahcdb kernel: Setting APIC routing to clustered
    Jan 18 10:09:58 ahcdb kernel: ACPI: HPET id: 0x10142201 base: 0xfde84000
    Jan 18 10:09:58 ahcdb kernel: Using ACPI (MADT) for SMP configuration information
    Jan 18 10:09:58 ahcdb kernel: Nosave address range: 000000000009b000 - 000000000009c000
    Jan 18 10:09:58 ahcdb kernel: Nosave address range: 000000000009c000 - 00000000000a0000
    Jan 18 10:09:58 ahcdb kernel: Nosave address range: 00000000000a0000 - 00000000000e0000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000000e0000 - 0000000000100000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000bff4b000 - 00000000bff4c000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000bff4c000 - 00000000bff57000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000bff57000 - 00000000bff58000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000bff58000 - 00000000c0000000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000c0000000 - 00000000d0000000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000d0000000 - 00000000e0000000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000e0000000 - 00000000fec00000
    Jan 18 10:09:59 ahcdb kernel: Nosave address range: 00000000fec00000 - 0000000100000000
    Jan 18 10:09:59 ahcdb kernel: Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
    Jan 18 10:09:59 ahcdb kernel: SMP: Allowing 16 CPUs, 0 hotplug CPUs
    Jan 18 10:09:59 ahcdb kernel: Built 1 zonelists. Total pages: 8268757
    Jan 18 10:09:59 ahcdb kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
    Jan 18 10:09:59 ahcdb kernel: Initializing CPU#0
    and
    root@ahcdb ~]# lspci
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
    00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
    01:00.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 01)
    02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 01)
    03:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1078 PCI-Express Fusion-MPT SAS (rev 04)
    05:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    0b:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    11:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    17:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    18:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
    1d:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    1e:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
    23:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    24:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
    24:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
    29:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
    [root@ahcdb ~]# lspci -n
    00:1c.0 0604: 8086:27d0 (rev 01)
    00:1d.0 0c03: 8086:27c8 (rev 01)
    00:1d.1 0c03: 8086:27c9 (rev 01)
    00:1d.2 0c03: 8086:27ca (rev 01)
    00:1d.3 0c03: 8086:27cb (rev 01)
    00:1d.7 0c03: 8086:27cc (rev 01)
    00:1e.0 0604: 8086:244e (rev e1)
    00:1f.0 0601: 8086:27b8 (rev 01)
    00:1f.1 0101: 8086:27df (rev 01)
    01:00.0 0300: 1002:515e (rev 02)
    02:00.0 0200: 14e4:1639 (rev 01)
    02:00.1 0200: 14e4:1639 (rev 01)
    03:00.0 0604: 1014:0308 (rev 01)
    04:00.0 0100: 1000:0062 (rev 04)
    05:00.0 0604: 1014:0308 (rev 01)
    0b:00.0 0604: 1014:0308 (rev 01)
    11:00.0 0604: 1014:0308 (rev 01)
    17:00.0 0604: 1014:0308 (rev 01)
    18:00.0 0c04: 1077:2432 (rev 03)
    1d:00.0 0604: 1014:0308 (rev 01)
    1e:00.0 0c04: 1077:2432 (rev 03)
    23:00.0 0604: 1014:0308 (rev 01)
    24:00.0 0200: 8086:105e (rev 06)
    24:00.1 0200: 8086:105e (rev 06)
    29:00.0 0604: 1014:0308 (rev 01)
    Please help me out to resolve this issue
    Thanks
    Alig

    Jan 16 04:02:03 ahcdb nmbd[11744]: MYGROUP(1) current master browser = AHCTST
    Jan 16 04:02:03 ahcdb nmbd[11744]: AHCDB 40819a03 (Samba Server Version 3.0.33-3.7.el5)
    Jan 16 04:02:03 ahcdb nmbd[11744]: AHCTST 40849a03 (Samba Server Version 3.0.33-3.7.el5)
    Jan 18 10:09:56 ahcdb syslogd 1.4.1: restart.
    Jan 18 10:09:56 ahcdb kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Jan 18 10:09:56 ahcdb kernel: Linux version 2.6.18-128.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 08:45:05 EST 2009
    Jan 18 10:09:56 ahcdb kernel: Command line: ro root=LABEL=/ rhgb quiet
    Jan 18 10:09:56 ahcdb kernel: BIOS-provided physical RAM map:Notice the long dry spell between line 3 and line 4? The system was indeed hung but unfortunately there is no usable information here about determining why. Research the NETCONSOLE and NETDUMP (or KDUMP) facilities; these can help get log messages that may not get written to the storage media (/var/log/messages).
    Also, keep a serial console or a similar feature like a putty session connected to the system console. You may see messages there that you cannot get anywhere else.
    If you can, file a trouble report and get support help.

  • EA6400 - Unable to access other local network devices

    This is odd and it just recently started acting this way.  No, I didn't have any configuration changes recently.
    I have an EA6400 wireless router.  Many devices are connected to it via Wireless (2 iPhones/2 iPads/3 Blu-Ray Players/1 Ubuntu laptop/1 Windows XP Laptop/1 Windows 8 desktop/1 Ubuntu Server/1 Epson Printer/1 Ubuntu Workstation).  Now prior to last night I didn't have any problems, wife had been printing from Windows 8 to Epson all day.  Sometime last night, she stopped being able to print to the Epson.  I looked, sure enough, error printing. 
    Here's some more details:
    All device are DHCP.  EXCEPT for the following 3 static devices:  Ubuntu Server, Epson Printer, Ubuntu Workstation
    Tried pinging the Epson from Windows 8, no go.  Tried pinging the router from Win8, no problem.  Ping www.google.com from Win8, no problem.  Ping Ubuntu server from Win8, no go.  Ping Epson from Ubuntu server, no go.  Ping Win8 from Ubuntu, no go.  Ping iPad from Win8, no problem. Ping iPhone from Win8, no problem.  Ping Ubuntu from WinXP laptop, no go.  Ping Epson from WinXP laptop, no go.  Ping from router to Win8, no problem.  Ping from router to Ubuntu server, no problem, ping from router to Epson, no problem.
    Wireshark of Win8 shows ping ARP request and reply for pings to iPad/iPhone.
    Wireshark of Win8 shows ping ARP Who Has request for pings to Epson, but no responses back.
    What the heck is going on?  No Windows firewall issues, I turned off Windows firewall for testing and still had the problems.
    Any ideas?  The EA6400 has the Smart WiFi software which makes it difficult to troubleshoot things on the router itself.

    it usually occurs with older devices which do not support 5ghz. glad you got it sorted.
    Cheap Homeowner Loans London UK

  • Airport Card on MacBook Pro unable to connect to VPN networks

    For the last year or so (apart from two glorious months at the start of this year) when using an Airport connection, I'm unable to access any VPN networks. I always get an error saying that the VPN server is not responding.
    However, if I use an ethernet connection, a USB Wifi modem or an iPhone tethering I can connect without any issues.
    The VPN connections started working in January to my utter surprise. I think it may have been connected to the 10.6.6 update, but stopped working again when I did my last update on March 13th. I installed Java 10.6 update 4, iTunes 10.2.1 and Safari 5.0.4.
    I'm about to install Mac OS X 10.6.7 to see if it has any effects but I wanted to know if this is a known issue and whether or not there are any solutions to the problem?
    Message was edited by: Tinna
    Seems like the 10.6.7 update solved the problem.

    Hello Oliver,
    I would start with removing your Wi-Fi network from your Preferred Network list. To do that, navigate to the Symptom: After restarting or waking from sleep, my computer might not connect to the Internet section in the first article and it will walk you through that. Another thing you can try is creating a new Network Location to see if there is an issue with your current configuration and the steps for that are in the second article.  
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/en-us/HT202222
    Using network locations (Mac OS X v10.6 and later)
    http://support.apple.com/en-us/HT202480
    Regards,
    -Norm G.  

  • Unable to Access Web Site (with same name) outside of Local Network

    Hi everyone,
    I have my web site (and some other services) hosted outside of my network by my hosting provider, but handle all other items using OS X Server on my network (i.e. Wiki and so forth).
    The problem is now that I am unable to access my website at www.mydomain.com from within the network. I have external DNS set up for www.mydomain.com to point to my website, while mydomain.com points to my OS X Server (static IP address). Internally in OS X Server's DNS settings this used to work when I had www.mydomain.com resolving to the IP address of my web host, in addition to the default domain settings that OS X had set up. For some reason this is no longer working, and I am unable to figure out why.
    Using latest version of OS X Server 3.0.2.
    Any help is greatly appreciated. Thanks!
    Update: this ended up being a redirect issue on the web host. I added another subdomain that was hosted externally, and it worked fine. For some reason my web host is redirecting www.mydomain.com to domain.com.

    I am in Texas and cannot get to that site either. Do you know for sure the site is up and working? It could just be down (for days, a site I support was down for almost 4 full days a few weeks ago due to a virus problem).
    This may (again, may) be your problem: I see you have a173.48.x.x (you really should x-out the last two octets of your IP address for privacy reasons), I am on a 173.74.x.x address; I know some people have had problems with getting to some sites now that they have a 173.x.x.x address. I think Verizon obtained addresses in that range and some of the addresses apparently previously belonged to spammers or some malicious folks.Some sites (web sites, intermeidate routers, etc.) blocked those addresses, and may not have updated their filters to remove the block on those addresses because they don't know that Verizon now owns them. If this is the problem, eventually those filters will get updated and you will be able to access the site, but this could be a fairly long time.
    If you know how to contact that site I suggest you email them about the problem. You can also try turning off your router overnight and when you turn it back on the next day you may find that you have a different address (one that doesn't start with 173) that will allow you to get to the site.
    I don't think there is much Verizon can do to help, it is not their site that is blocking your address (at least I don't think it is).
    Hope this helps.
    Justin
    Verizon FiOS TV, Internet, and phone
    IMG 1.6.2, Build 08.58
    Keller, TX 76248

  • Unable to access my other macs in the airport network

    Since I have installed Leopard 10.5.1 I am unable to access my other MACs in my airpot network for file sharing. Interesting that I can accesss my older IMAC which has TIGER 10.4.11 installed. This bug is new since I updated to 10.5.1. Its funny but "screensharing" on the other hand is working.
    (I checked all possibilities in the firewall setting. (File sharing) is allowed on all MACs.
    Anyone with a solution or having the same problem
    Tony

    Ok, they didn't post the link to my screen cap.
    Here is the link to the screen cap of my problem in FireFo:.
    http://i88.photobucket.com/albums/k196/ajax6677/more.png
    Here is how it looks when loaded properly in IE:
    http://i88.photobucket.com/albums/k196/ajax6677/more2.png
    They are also attached below/

  • Unable to access internal networks over Remote acces VPN

    Hi,
    I have set up a Remote access VPN from Home to Cisco ASA 5512-X.
    I am able to connect successfully and even getting a valid IP address from VPN pool 172.21.3.1-. However I am unable to access any of the internal resources.
    Internal Network: 172.20.0.0 255.255.0.0
    Please if someone can help identifying the issue.
    Below is the running config:-
    Result of the command: "sh run"
    : Saved
    ASA Version 9.1(1)
    hostname ASA
    domain-name M8fl.com
    enable password Aoz9GlxLLvkWrTUy encrypted
    passwd Gc1jA6zbgOsj63RW encrypted
    names
    ip local pool vpnclients 172.21.3.1-172.21.3.20 mask 255.255.0.0
    ip local pool test 172.21.3.21-172.21.3.40 mask 255.255.255.0
    interface GigabitEthernet0/1
     nameif inside
     security-level 100
     ip address 172.20.254.250 255.255.0.0
    interface GigabitEthernet0/2
     description vodafone 100mb internet 195.11.180.40_29
     speed 100
     duplex full
     nameif outside1
     security-level 1
     ip address 195.11.180.42 255.255.255.248
    interface GigabitEthernet0/3
     description Voice
     nameif Voice
     security-level 80
     ip address 192.168.2.1 255.255.255.252
    interface GigabitEthernet0/4
     shutdown
     no nameif
     no security-level
     no ip address
    interface GigabitEthernet0/5
     shutdown
     no nameif
     no security-level
     no ip address
    interface Management0/0
     management-only
     nameif management
     security-level 100
     ip address 192.168.1.1 255.255.255.0
    boot system disk0:/asa911-smp-k8.bin
    ftp mode passive
    clock timezone GMT 0
    dns domain-lookup inside
    dns domain-lookup outside1
    dns domain-lookup management
    dns server-group DefaultDNS
     name-server 10.0.0.4
     name-server 172.20.0.100
     domain-name M8fl.com
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    object network VLAN1
     subnet 172.20.0.0 255.255.0.0
    object network NETWORK_OBJ_172.20.3.0_27
     subnet 172.21.3.0 255.255.255.224
    object network Voice_Net
     subnet 172.21.20.0 255.255.255.0
    object network PBX_Internal
     host 192.168.2.2
     description PBX Internal
    object network Voice_External
     host 195.11.180.43
     description For PBX
    object network Raith_Remote_Network
     subnet 192.168.20.0 255.255.255.0
     description Raith Remote Network
    object network NETWORK_OBJ_172.21.3.0_27
     subnet 172.21.3.0 255.255.255.224
    object network NETWORK_OBJ_172.21.3.0_26
     subnet 172.21.3.0 255.255.255.192
    object-group network azure-networks
     network-object 10.0.0.0 255.0.0.0
    object-group network onprem-networks
     network-object 172.20.0.0 255.255.0.0
    object-group protocol TCPUDP
     protocol-object udp
     protocol-object tcp
    object-group service test_PPTP
     service-object ip
     service-object tcp destination eq pptp
    access-list azure-vpn-acl extended permit ip object-group onprem-networks object-group azure-networks
    access-list outside_access_in extended permit ip object-group azure-networks object-group onprem-networks
    access-list outside_access_in extended permit icmp any any
    access-list outside_access_in extended permit ip any any
    access-list inside_access_in extended permit ip any any log disable
    access-list inside_access_in_1 extended permit ip object-group onprem-networks object-group azure-networks
    access-list inside_access_in_1 extended permit ip any object Voice_Net log debugging
    access-list inside_access_in_1 extended permit ip any any
    access-list outside_access_in_1 extended permit ip object-group azure-networks object-group onprem-networks
    access-list outside_access_in_1 extended permit icmp any any
    access-list outside_access_in_1 extended permit ip any any inactive
    access-list Voice_access_in extended permit ip any any log debugging
    access-list outside_cryptomap extended permit ip object-group onprem-networks object Raith_Remote_Network
    pager lines 24
    logging enable
    logging buffer-size 40000
    logging buffered notifications
    logging asdm debugging
    mtu outside 1500
    mtu inside 1500
    mtu outside1 1500
    mtu Voice 1500
    mtu management 1500
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-66114.bin
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (inside,outside1) source static onprem-networks onprem-networks destination static azure-networks azure-networks
    nat (inside,outside1) source dynamic VLAN1 interface
    nat (inside,Voice) source static VLAN1 VLAN1 destination static Voice_Net Voice_Net no-proxy-arp route-lookup
    nat (Voice,outside1) source static PBX_Internal Voice_External
    nat (inside,outside) source static onprem-networks onprem-networks destination static Raith_Remote_Network Raith_Remote_Network no-proxy-arp route-lookup
    nat (inside,outside1) source static any any destination static NETWORK_OBJ_172.21.3.0_27 NETWORK_OBJ_172.21.3.0_27 no-proxy-arp route-lookup
    nat (inside,outside1) source static any any destination static NETWORK_OBJ_172.21.3.0_26 NETWORK_OBJ_172.21.3.0_26 no-proxy-arp route-lookup
    access-group outside_access_in in interface outside
    access-group inside_access_in_1 in interface inside
    access-group outside_access_in_1 in interface outside1
    access-group Voice_access_in in interface Voice
    route outside1 0.0.0.0 0.0.0.0 195.11.180.41 10
    route inside 172.21.20.0 255.255.255.0 172.20.20.253 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    aaa authentication http console LOCAL
    http server enable 444
    http 192.168.1.0 255.255.255.0 management
    http 172.20.0.0 255.255.0.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    sysopt connection tcpmss 1350
    sysopt noproxyarp outside
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set azure-ipsec-proposal-set esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
    crypto ipsec ikev2 ipsec-proposal DES
     protocol esp encryption des
     protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
     protocol esp encryption 3des
     protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
     protocol esp encryption aes
     protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
     protocol esp encryption aes-192
     protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES256
     protocol esp encryption aes-256
     protocol esp integrity sha-1 md5
    crypto ipsec security-association lifetime seconds 3600
    crypto ipsec security-association lifetime kilobytes 102400000
    crypto ipsec security-association pmtu-aging infinite
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-3DES-SHA
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime seconds 28800
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime kilobytes 4608000
    crypto map outside_map interface outside
    crypto ca trustpoint ASDM_TrustPoint0
     enrollment terminal
     subject-name CN=ASA
     crl configure
    crypto ca trustpool policy
    crypto ikev2 policy 1
     encryption aes-256
     integrity sha
     group 5 2
     prf sha
     lifetime seconds 86400
    crypto ikev2 policy 10
     encryption aes-256
     integrity sha
     group 5 2
     prf sha
     lifetime seconds 28800
    crypto ikev2 policy 20
     encryption aes
     integrity sha
     group 5 2
     prf sha
     lifetime seconds 86400
    crypto ikev2 policy 30
     encryption 3des
     integrity sha
     group 5 2
     prf sha
     lifetime seconds 86400
    crypto ikev2 policy 40
     encryption des
     integrity sha
     group 5 2
     prf sha
     lifetime seconds 86400
    crypto ikev2 enable outside
    crypto ikev1 enable outside
    crypto ikev1 enable outside1
    crypto ikev1 policy 10
     authentication pre-share
     encryption aes-256
     hash sha
     group 2
     lifetime 28800
    crypto ikev1 policy 20
     authentication rsa-sig
     encryption aes-256
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 30
     authentication pre-share
     encryption aes-256
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 40
     authentication crack
     encryption aes-192
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 50
     authentication rsa-sig
     encryption aes-192
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 60
     authentication pre-share
     encryption aes-192
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 70
     authentication crack
     encryption aes
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 80
     authentication rsa-sig
     encryption aes
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 90
     authentication pre-share
     encryption aes
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 100
     authentication crack
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 110
     authentication rsa-sig
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 120
     authentication pre-share
     encryption 3des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 130
     authentication crack
     encryption des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 140
     authentication rsa-sig
     encryption des
     hash sha
     group 2
     lifetime 86400
    crypto ikev1 policy 150
     authentication pre-share
     encryption des
     hash sha
     group 2
     lifetime 86400
    telnet 172.20.0.0 255.255.0.0 inside
    telnet timeout 5
    ssh 172.20.0.0 255.255.0.0 inside
    ssh timeout 5
    ssh version 2
    console timeout 0
    dhcpd address 172.20.2.1-172.20.2.254 inside
    dhcpd dns 10.0.0.4 172.20.0.100 interface inside
    dhcpd enable inside
    dhcpd dns 172.21.20.254 interface Voice
    dhcpd address 192.168.1.2-192.168.1.254 management
    dhcpd enable management
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    tftp-server inside 172.20.2.34 /tftp
    webvpn
     enable outside1
     anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
     anyconnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
     anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
     anyconnect enable
     tunnel-group-list enable
     internal-password enable
    group-policy DefaultRAGroup_2 internal
    group-policy DefaultRAGroup_2 attributes
     dns-server value 10.0.0.4 172.20.0.100
     vpn-tunnel-protocol l2tp-ipsec
     default-domain value
    group-policy DefaultRAGroup_3 internal
    group-policy DefaultRAGroup_3 attributes
     dns-server value 10.0.0.4 172.20.0.100
     vpn-tunnel-protocol ikev1 l2tp-ipsec
     default-domain value
    group-policy DefaultRAGroup internal
    group-policy DefaultRAGroup attributes
     dns-server value 10.0.0.4 172.20.0.100
     vpn-tunnel-protocol l2tp-ipsec
     default-domain value
    group-policy DefaultRAGroup_1 internal
    group-policy DefaultRAGroup_1 attributes
     dns-server value 10.0.0.4 172.20.0.100
     vpn-tunnel-protocol l2tp-ipsec
     default-domain value
    group-policy DfltGrpPolicy attributes
     vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client ssl-clientless
    group-policy RA_VPN internal
    group-policy RA_VPN attributes
     dns-server value 8.8.8.8 4.2.2.2
     vpn-tunnel-protocol ikev1
     default-domain value
    group-policy "GroupPolicy_Anyconnect _profile" internal
    group-policy "GroupPolicy_Anyconnect _profile" attributes
     wins-server none
     dns-server value 8.8.8.8
     vpn-tunnel-protocol ssl-client ssl-clientless
     default-domain none
     webvpn
      file-browsing enable
    group-policy GroupPolicy_89.241.208.14 internal
    group-policy GroupPolicy_89.241.208.14 attributes
     vpn-tunnel-protocol ikev1
    username test2 password encrypted privilege 15
    username test1 password  nt-encrypted privilege 0
    username test1 attributes
     vpn-group-policy DefaultRAGroup_2
    username test password  encrypted privilege 15
    username test attributes
     vpn-group-policy DefaultRAGroup_1
    username EdwardM password  encrypted privilege 15
    username vpntest password  encrypted privilege 0
    username vpntest attributes
     vpn-group-policy RA_VPN
    username vpntest3 password  nt-encrypted privilege 15
    username vpntest3 attributes
     service-type remote-access
    username rhunton password  encrypted privilege 15
    username rhunton attributes
     service-type admin
    username e.melaugh password  encrypted privilege 15
    username netx password  encrypted privilege 15
    username netx attributes
     service-type remote-access
    username colin password  encrypted privilege 15
    username colin attributes
     service-type remote-access
    tunnel-group DefaultL2LGroup ipsec-attributes
     ikev1 pre-shared-key *****
    tunnel-group DefaultRAGroup general-attributes
     address-pool vpnclients
     default-group-policy DefaultRAGroup_3
    tunnel-group DefaultRAGroup ipsec-attributes
     ikev1 pre-shared-key *****
     isakmp keepalive disable
    tunnel-group DefaultRAGroup ppp-attributes
     no authentication chap
     authentication ms-chap-v2
    tunnel-group "Anyconnect _profile" type remote-access
    tunnel-group "Anyconnect _profile" general-attributes
     address-pool vpnclients
     default-group-policy "GroupPolicy_Anyconnect _profile"
    tunnel-group "Anyconnect _profile" webvpn-attributes
     group-alias "Anyconnect _profile" enable
    tunnel-group 137.117.215.177 type ipsec-l2l
    tunnel-group 137.117.215.177 ipsec-attributes
     ikev1 pre-shared-key *****
     peer-id-validate nocheck
     isakmp keepalive disable
    tunnel-group 89.241.208.14 type ipsec-l2l
    tunnel-group 89.241.208.14 general-attributes
     default-group-policy GroupPolicy_89.241.208.14
    tunnel-group 89.241.208.14 ipsec-attributes
     ikev1 pre-shared-key *****
    class-map inspection_default
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ip-options
      inspect pptp
    policy-map type inspect ipsec-pass-thru Fairhurst
     description to allow vpn to fairhurst network
     parameters
      esp
      ah
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:f4185106b309478da7804dc22d2c1a85
    : end

    Hi,
    You seem to have this nat (inside,outside1) source dynamic VLAN1 interface at line 2 which is causing the identity Nat/ Nat exempt to fail.
    It is always good to use the packet tracer feature on the ASA to see what exactly is happening.
    Try this
    nat (inside,outside1) 1 source static VLAN1 VLAN1 destination static NETWORK_OBJ_172.21.3.0_27 NETWORK_OBJ_172.21.3.0_27 no-pr route-lo
    Let me know how it goes for you.
    Regards,
    Nitish Emmanuel

  • Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet.  We also use Juniper NCP client to access our system remote.  A VPN connection is created, but I am unable to access servers on our network.  This works on iPhone 4.

    Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet.  We also use Juniper NCP client to access our local system from a remote location.  A VPN connection is created, but I am unable to access servers in our network.  This same functionality works using my colleagues iPhone 4.
    Both phones are running iOS 6.1.3.  I tried to reset network settings, but still unable to ping servers in our network.  This is a feature that our sales team relies heavily on when out of the office.  Hoping someone has some suggestions on what is different between the 2 phones.

    Hi,
    Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
    Here is an example, share it with you as a reference.
    http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
    In addition, you can refer to the link below for more solution about this problem.
    You Cannot Connect to the Internet After You Connect to a VPN Server
    http://support.microsoft.com/kb/317025
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for

  • Datasource from a logical database.

    Hi all,   I am in need of creating a datasource from a std.. Logical Database IMA in R/3. Is it possible to create a datasource directly from logical database or it is essential to find the base tables fetching data to the logical databse and look fo

  • Hardware Change = Reinstall?

    This goes to show that even though I've worked with Linux for awhile, I'm still somewhat of a newbie... probably a stupid question, but there you go... Anyways, my motherboard seems to be dieing a slow and painful death (taking out my Videocard on th

  • Ora-03113  and ORA-00474 - database does not startup . Help !

    - Its a Oracle 10.2.0.1.0 standard edition database. - we get the ora-03113 end of file communication error during startup. - when we followed step by step it happens between MOUNT => OPEN stage. - database does mount but gives ora-03113 end of file

  • Thumbs up from a new MPB owner

    After 18 months of research, and subscribing to Macworld and Maclife and spending alot of time in my local Apple stores ---- I made the move this past Saturday to a stock 2.16 Ghz MBP Matte display. I have been using it every day since Saturday and i

  • What's the best netflix app for watching Netflix on an itouch?

    There seem to be several Netflix apps available. I want one that will allow me to see my Instant Queue list and watch movies/shows on my itouch. What's the best one?