Unable to activate debugging on the server
Hello,
At the Developer Studio at the J2EE Engine tab view there is an option to Enable debugging on the portal server (By right-clicking on server0).
The problem is that all this menue is shaded and unavailable to me. What should I do in order to be able to use the features ?
Sorry I said VA before - I meant go into the configtool.
In there click on your instance and the on the right pane click on the tab Servers Debug. The top option Debuggable has to be checked.
Hope this elps
Similar Messages
-
Unable to automatically step into the server. the remote procedure cannot be debugged.
Hi,
I am trying to deploy report using ssis script c# code.I am using the proxy for ReportingService2010 and following code is giving the error.
code:
ReportingService2010 rs = new ReportingService2010();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.CreateFolder("MSI Report Demo", "/", null);
Error:
unable to automatically step into the server. the remote procedure cannot be debugged. This usually indicates that debugging has not been enabled on the server.
Please share the idea on it.
Thanks in advance.
-Gautamjust make a trust between to domain and it works .
-
I have installed Adobe Photoshop CS (original 2003 2004 version) on my new Windows PC. I have been unable to activate it and the note says it will expire after 29 days. What can I do to activate it?
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
-
Unable to find workbook in the server
When we run 3.x workbook in 7.0 we are getting the following pop-up 'Unable to find workbook in the server'. We were able to open the workbook in the 3.x. Did any one face the same issue.The trace showns authorization are good. Pls. Help!!
Hi,
on thing I noticed... SP 13 is not that stable...
Hint: ask your technical guys to implement support pack 14... I think your problem will be solved then... because you say you only have this problem since you upgraded...
Ciao
Joke -
I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT -
Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server : CLI-SRV01
Database : CLI-MDB01
Mailbox : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive :
Result : *FAILURE*
Latency : 00:00:00
Error : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
[Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/PatriceHi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support -
Activity monitor unable to execute queries againest the server?
2012 SQL Serevr SSMS
Activity monitor unable to execute queries againest the server?
any ideas???
ebroHi,
Please check if there are useful message in SQL error log. If there is lock the memory message was logged in the error log, you may enable
lock pages in memory option for the SQL Server service account and see how it works.
Also, apply the service pack and updates of SQL Server.
To enable the lock pages in memory option, please see:
Enable the Lock Pages in Memory Option (Windows)
http://msdn.microsoft.com/en-us/library/ms190730.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Unable to activate or deactivate the Correlation policy
After creating a correlation policy with complex conditions, I am unable to activate or deactivate the policy.
Reason
This issue occurs when a complex condition is created, and one of the sub conditions is deleted. In the case below, the correlation rule is missing a sub condition that would have been used together with the Rule Message condition, but it has been deleted. The following screenshot shows a similar situation.
Workaround
The workaround of this issue is to delete the "indented" broken complex condition, and adding it back to the rule as a regular condition. -
HT201263 unable to activate or restore the i phone
after updating the iphone i am unable to activate the device
Did you have modified software installed before the phone was updated? If yes, jailbreaking can block the activation and there is nothing you can do about it.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
Did you change the provider and has the phone been officially unlocked before you tried to update the device? -
HT4623 Unable to activate my iphone - 'activation server is temporarily unavailable'.
Hi All,
I updated to IOS 6.1.2 which has been a total diaster. I am regulary losing signal, baterry life and more importantly the service from my provider - 'Searching' keeps appearing.
I have reset my phone via itunes four times over the last three days. Now I have unable to activate my phone. Any ideas how to solve this problem?
Many thanks,
Dal.Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier? -
How can I activate T3s at the server
Hi, I have configured a new T3 for a secific server and config looks good.
But on the server side I cannot get the T3 connected,
after cfgadm an d/or devfsadm the new t3 coonection are not shown.
there are still old connection which are no longer availabe and also
I dont know how do get this away.
Also a reboort -- -r doesnt helpok, after devfsadm -C, nothing changed.
Still at the server side I see old T3s which we had re-configured to another server and there all is fine. So I normally know the steps.
The new configured T3 (new as it was complete rebuild by SUN) is setup for 2 servers.
On Server A all is find with same commands, nothing special.
On Server B I cannot get the new T3 connected as the old ones still there ??. Old T3 connection are unconfigured but devfsadm -C does not clean it.
Dont know how to clean old T3 connections.
We are not using a switch, mpxio is enabled.
t3be4:/:<2>sys list
controller : 2.0
blocksize : 32k
cache : auto
mirror : auto
mp_support : mpxio
naca : off
rd_ahead : on
recon_rate : med
sys memsize : 128 MBytes
cache memsize : 1024 MBytes
enable_volslice : on
fc_topology : auto
fc_speed : 1Gb
disk_scrubber : on
ondg : befit
all is based on SOLARIS 8, and we cannot change to 9 or 10. -
Unable to start debugging on the web server error message when running asp
Hi Mark,
i want to apply a asp web application on your book at page 336/337
I am using .NET 2005 pro. edition.But if i run(play button) the asp web site
it gives above error message which i wrote on the subject.
Could someone help me?
Thanks for reading..
Regards..
S.KYou may want to check whether your Web application has been configured to use "Integrated Windows Authentication".
Go to your IIS, check the Properties of your web application under Web Sites\Default Web Site, select "Directory Security" tab, click the first "Edit..." button (for Anonymous access and authentication control). At the very bottom, make sure "Integrated Windows authentication" is checked.
Re-start your Web application.
Message was edited by:
shsu -
My iPhone cannot be activated can u tell me the reason.
Has the device ever been hacked or jailbroken?
-
Every 2 to 3 mouse clicks, I am unable to activate any of the controls on the web page.
Current workaround involves having task manager on screen, clicking in it to activate it & then continuing on the web page for another 2 or 3 clicks. I've had to go back to V3.0.19 as the latest version was crucifying my system performance with container.exe
I'm running firefox on a win XP system. I was running the latest version up until about a week ago, but it is too processor hungry and ran painfully slow after it had been on for a while. So I reverted back to an older version, which I don't recall having any issues with in the past.
I always use the internet in a limited user account, and I have no anti virus software running.
When I reverted back to the previous version, I kept all my current settings. Is it possible that some of the retained settings are incompatible?Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
Unable to activate or edit the transformation in dev
Hi guys,
i have created a transformation in dev bet info source and infocube, which is a standard one and having more than 40 routines. Now it is been moved to quality and production, where we can see only 10 routines. By mistake i deleted one routine from one info object in dev, then the transformation became inactive. I am trying to activate, which is not permitting not even for edit also. I can add deleted routine only once the edit mode is possible.
pl give solution;Hi, since you have alreadytransported your transformation to Quality & Prod, request you to try the following.
Check in your Dev env., if your transformation is locked out in any of the transport request. Usually when you would have deleted the routine by mistake an dtried to save, the system would prompt for a transport request. Did you choose "Local Objects" or did you choose a request. If you have chosen a request, you can try to delete it. Also check if the object is locked otherwise in SM12.
Also check if you have the necessary authorization post the transport to Quality & Prod environment.
I can't think of any other reason why the system would not allow you to edit it.
Once you are able to edit, copy & paste the routine from quality or Prod, if its part of the ones that have been transported.
While creating the transport request, to be on the safe side, check for the full transport package in SE09, which will also give you an idea of how many routines are being transported, before you actually move to prod.
Regards
Anujit Ghosh
Maybe you are looking for
-
Hi i got a samsung 4s after my iphone stop working it would not turn on but i am not able to recive messages from an iphone since my i message is on in my previous phone. I am not able to turn it off since it does not turn on. Could you help me i was
-
HP laptop can't connect to AirPort Extreme
My dad has an HP laptop with an 802.11G wifi card. When I enabled AirPort Disk and restarted the router, the laptop came up with a "Limited or no connectivity" error. I tried resetting the network, unplugging the router, and even extending it with an
-
JTable with ScrollPane update problem
hay i have a table and scrollpane is used as a container, at runtime i create new object of table and assign it to the scrollpane, but its still showing the old table, I also tried to updateUI(); repaint(); but it still showing the same old table, I
-
Audio transmit problem under redhat linux 9
Hi !! I have already compiled J2sdk1.4.2 and JMF2.1.1e performance pack for linux and they both work alright under Redhat linux 9. JMStudio works fine to playback audio files. The problem I'm having is when I try to transmit and receive audio files t
-
help me