Unable to add remote system into cluster using osx 10.5.2

About a month ago, I had a quartermaster managed compressor cluster setup with three (3) systems. I was running FCP 6.0. on one system with quartermaster on that system managing the cluster. Compressor, quatermaster, and quicktime were installed on the other systems. All systems were running osx 10.5. FCP 6.0 suite tools was installed on one system. One of the systems was an intel and I had a two (2) instances setup as well as a virtual cluster on the intel. All worked perfectly.
All machines were upgraded, to the latest quartermaster, compressor, quicktime, and osx 10.5.2 with the leopard graphics updates.
Now I can no longer join the remote systems into the cluster. On these systems I have share and managed set, for both rendering and compressor. Yet in quartermaster they only show up as rendering nodes. If I remove the shared option, then the nodes appear as a unmanaged compressor service. But they are greyed and cannot be added to a cluster.
Before the update, they would display in quartermaster as both rendering and compressor services and could be added to a managed compressor cluster.
Did the updates break something or is there a new requirement that I am missing?
thanks

I'm having exactly the same problem on multiple machines, both Intel octocore and G5 quadcore. I'm running 10.5.4 with all the latest updates on all machines. Everything was working, now we can't drag any of the machines into a cluster to make a new one. Like you say, they only appear if Managed is unchecked (on the machine providing the QMaster service), and then are still greyed out, and not draggable. And you can't save a cluster without specifying the cluster controller, which you can't because nothing can be dragged in. The nodes appear to be unlocked (although the icon isn't very obvious), but even if they're locked, there is no password entry that pops up when clicked, and none have a password set in their QMaster System Preferences.
To test, I did a totally 100% fresh pristine Leopard install and a dual G5, ran all OS upgrades, then did a fresh FCP Studio 2 install, and ran upgrades again and repaired permissions just for good measure. No dice. Exactly the same problem as on the other machines. This is a brand new install and it doesn't work!
Very frustrating problem and I can't believe more people aren't seeing it. Totally fresh install, what else can be done? Well, time to call AppleCare, I guess.

Similar Messages

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • Is there possibility to add dimension value into hierarchy using dml or spl

    1 Is there possibility to add dimension value into hierarchy using dml or spl?
    If such possibility exists how to do that.
    2 Is it possible to sort dimension values inside one branch of the hierarchy?

    What version of OLAP are you using and how did you create your AW (e.g., AWM)?
    Assuming that you're used either AWM or the Java API for AWs in 10g, there isn't an OLAP DML for adding a dimension member to a dimension (and have all the meta data kept in sync); you must load dimension members using AWM the Java API for AWs.
    So, make your changes in the the dimension table and process that table.
    For sorting, you can add a sort attribute to the dimension. Add the sort attribute to the model, indicate that it's used for sorting, add the sort attribute to your dimension table and maintain the dimension.

  • How to add business systems into DIRECTORY?

    Hi,
    I have problem to add business system into Business Systems list in my scenarion in the Integration Directory. These systems are already in the SLD, but when I try to assign a business system, I have only choice to assign XI...
    How to solve this problem?
    Thanx 4 answers!
    Peter

    hi Peter,
    maybe your business systems are already inside ID?
    BTW
    did you assign you business system to a correct
    integration server? (when definig the business system)
    also remember to refresh SLD data cache from ID
    - environment
    - clear SLD data cache
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • I am unable to add Data element into existing Data Type

    Hi Experts,
    I am unable to add Data element into existing Data Type, It shows disable mode, suggest me this..
    Thanks

    Yep got it...
    Edited by: Manoj on Aug 20, 2008 1:09 AM

  • Unable to Add SAP System in NWDS to import RFC into BPM

    Hi ,
    I created a RFC out of a BRFPlus function in CRM system.
    Now I am trying to add the SAP CRM system in NWDS from Preferences option.
    But unable to do so.The error says wrong user/password.
    However I am able to create the relevant configurations in Netweaver Administrator successfully.
    Can you pleas guide me on how to add the SAP CRM system successfully in NWDS?
    Thanks in advance

    Hi,
    for adding AS Java you need to provide the OS user. J2EE Administrator won't work here.
    Are you sure that the OS user / password are really correct ? Can you log on with those credentials to the OS itself ?
    If yes, please provide screenshots how exactly you have deleted the secure store in NWDS.
    If you deleted it properly, did you restart NWDS? 
    Can you add the System via the SAP MMC console perspective of NWDS?
    Have a look at this (see the workaround in the topmost entry there):
    NWDS Troubleshooting - Java Development - SCN Wiki
    I hope this helps.
    Regards,
    Ervin

  • Add remote system to SLD

    Hi folks,
    I have a SLD set up to use the R/3 backend on the same server. I've also added another R/3 backend to the technical systems, so I can set up a JCO to use this. When I try to set up a JCO with the new backend and try to ping it I get the following error:
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM  TYPE=B MSHOST=trel-p40 GROUP=PUBLIC R3NAME=SOE MSSERV=sapmsSOE PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       service 'sapmsSOE' unknown TIME        Thu May 31 12:43:10 2007 RELEASE     700 COMPONENT   NI (network interface) VERSION     38 RC          -3 MODULE      nixxhsl.cpp LINE        776 DETAIL      NiHsLGetServNo: service name cached as unknown COUNTER     1
    As I can see the JCO points to my local R/3 not to the remote one. So here's my question: How do I tell the SLD that my newly added technical system is in some onther place. I've added the hostnames respectivly but I can't see how the sld would know where to look for a hostname that's not part of the local domain.
    Any help would be highly appreciated!
    Thanks in advance,
      Robert

    Sure, so here's what I'm trying to do: I have a development system consistion of an ERP 5 plus Portal 6.0 and all nessaccery components. I'll use this system to develop webdynpro apps and get them running in the portal.
    It's basically just prototypes but in order to give some customers the big picture I wanna connect my webdynpro apps to the customers R/3 for a live presentation with real data.
    The Connection runns over JCOs implementing the SLD destination and login data for the remote system (customer side). The remote R/3 just holds an functional package (don't know how it's called in English) that's RFC enabled.
    So now I'm facing the problem: How do I get the remote system to be accessable by my JCOs. My thought was just add it in the SLD as a technical system.
    As you can see I'm lacking basic understanding of SLD. Maybe you could set me on the right track?

  • Unable to add a system in ACC

    Hello,
    We are unable to add a new system in the ACC.Initially we addeed one system in the ACC and everything went fine but we are facing trouble while another system in the ACC.We are getting the following error " Hostname'loopback' is reported from host xxxxxxxx as well as from host xxxxxxx check your network setup! ".
    I checked and found that the loopback address is same for both the hosts.
    Is it necessary to have two seperate loop back adresses for adding in the ACC.
    Regards,
    Vamshi T

    Hi Vamshi,
    I am also getting same error, but i looked into the note and did the following:
    In the field "Hostnames/IP Addresses excluded from hostname" - I gave hostname/ip address.
    Is this same you gave or anything like loopback/ip address also you gave ?
    Thanks,
    Murali.

  • Unable to add PO system in NWDS

    Hi All,
    I tried to add the SAP PO system to NWDS using Preferences-SAP AS Java also from Management Console ,it asked me for OS logon SAP JEE Host.
    Here I tried both Administrator as well as OS user id,but its not accepting.Before doing that I cleared all the passwords from Preferences-Security Storage.
    I checked both Administrator as well as OS user ids are not changed.
    Can you please guide me?
    Thanks in advance

    Hi,
    for adding AS Java you need to provide the OS user. J2EE Administrator won't work here.
    Are you sure that the OS user / password are really correct ? Can you log on with those credentials to the OS itself ?
    If yes, please provide screenshots how exactly you have deleted the secure store in NWDS.
    If you deleted it properly, did you restart NWDS? 
    Can you add the System via the SAP MMC console perspective of NWDS?
    Have a look at this (see the workaround in the topmost entry there):
    NWDS Troubleshooting - Java Development - SCN Wiki
    I hope this helps.
    Regards,
    Ervin

  • Unable to add SAP system to SLD

    Hi all,
    I am trying to add a new SAP WEB AS 640 system to my SLD.
    But the SLD only shows latest available Product version as 620.
    I downloaded the latest cimsap,CR_Content,CR_Delta zip files from the marketplace.
    On applying note 669669, import of cimsap.zip file is successful, but import of latest CR_Content file gives following error: <b>"The content version 2.0 of the full import does not fit to the current content of the target namespace."</b>
    I am unable to add the SAP system. What should I do?
    Regards,
    Puloma.

    Hi Puloma,
    Follow the steps specified in this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/5f7ecd8ddc454ca86ff6e53919b0d1/content.htm
    Please reward appropriate points.
    Bala
    Message was edited by: Bala Krishnan

  • Unable to patch remote systems

    Need help with the setup to patch remote systems. I am using NIS and am first trying to patch Sol 10 systems before I install the management software on older versions. Can someone give me a clue why I am failing to update these remote systems please.
    Chris

    MSI (c) (1C:64) [09:06:15:075]: Final Patch Application Order:
    MSI (c) (1C:64) [09:06:15:075]: Other Patches:
    MSI (c) (1C:64) [09:06:15:075]: Unknown\Absent: {AC76BA86-A440-FFFF-A440-7A8C40011009} - C:\Users\*********\Downloads\AcrobatUpd11009.msp
    The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
    C:\Windows\Installer\c288bb.msi
    MSI (c) (1C:64) [09:06:15:075]: Product: Adobe Acrobat XI Standard - Update '{AC76BA86-A440-FFFF-A440-7A8C40011009}' could not be installed. Error code 1642. Additional information is available in the log file c:\temp\acro.log.
    MSI (c) (1C:64) [09:06:15:076]: Windows Installer installed an update. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.05. Product Language: 1033. Manufacturer: Adobe Systems. Update Name: {AC76BA86-A440-FFFF-A440-7A8C40011009}. Installation success or error status: 1642.
    MSI (c) (1C:64) [09:06:15:077]: Product: Adobe Acrobat XI Standard -- Installation failed.
    MSI (c) (1C:64) [09:06:15:077]: Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.05. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1642.

  • Unable to add remote instance to a cluster

    Hello,
    I’m having an issue with setting up Cold Fusion 8 as a
    remote instance cluster. I’m unable to get the remote
    instance shown in the Cluster Manager.
    I have registered the remote instance with the appropriate
    instance name. It picks up the C:\JRun4/servers/cfusion
    but it does not show the restart remote CF service button or
    pause the remote CF instance or stop.
    I followed the instructions which were here:
    http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=clustering_6.html
    The remote Cold Fusion system used is version
    ColdFusion 8 Update 1 (8.0.1)
    Release Date: April 03, 2008
    This is running on Windows 2000 Server standard
    This is a workgroup server
    Has an internal IP address and an external one
    Jrun4
    This currently runs a site that can be accessed
    The Cluster controlled is running on
    ColdFusion 8 CF Hotfix 3
    This is running on Windows 2000 Server standard
    This is a workgroup server.
    Jrun4
    Have an internal IP address and an external one
    This currently runs a site that can be accessed.
    Both servers are licensed to the Enterprise level
    When I click on the Coldfusion administrator to open the
    remote instance CF Administrator the ‘404 error’
    message was shown.
    i.e. (
    http://hostname:8300/CFIDE/administrator).
    I have since copied the CFIDE into this location
    C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\CFIDE
    When I click on the Coldfusion administrator on the remote
    instance this will now display a listing of the remote CFIDE
    directory but not the CF Administrator page!
    When I change the CFIDE directory to CFIDE1 and change the
    URL for the CF Administrator it will show; very strange.
    I have restarted both Coldfusion instances but I cannot get
    the remote instance to appear in the Cluster Manager so I can
    configure this as a Load Balancing Cluster
    I have looked at the security properties in this file:
    although both servers are on the same subnet.
    In the ColdFusion8/runtime/lib/security.properties file by
    default, the jrun.subnet.restriction property is set to the value
    255.255.255.0, which limits JNDI access to the 255.255.255.0
    subnet. You can use jrun.trusted.hosts on its own or in combination
    with jrun.subnet.restriction to allow JNDI access to a
    comma-separated list of IP addresses (recommended) or host names.
    Any help in problem solving this issue, advise and pointers
    would be great.
    Kind Regards
    Chris Blackmore

    I'm having exactly the same problem on multiple machines, both Intel octocore and G5 quadcore. I'm running 10.5.4 with all the latest updates on all machines. Everything was working, now we can't drag any of the machines into a cluster to make a new one. Like you say, they only appear if Managed is unchecked (on the machine providing the QMaster service), and then are still greyed out, and not draggable. And you can't save a cluster without specifying the cluster controller, which you can't because nothing can be dragged in. The nodes appear to be unlocked (although the icon isn't very obvious), but even if they're locked, there is no password entry that pops up when clicked, and none have a password set in their QMaster System Preferences.
    To test, I did a totally 100% fresh pristine Leopard install and a dual G5, ran all OS upgrades, then did a fresh FCP Studio 2 install, and ran upgrades again and repaired permissions just for good measure. No dice. Exactly the same problem as on the other machines. This is a brand new install and it doesn't work!
    Very frustrating problem and I can't believe more people aren't seeing it. Totally fresh install, what else can be done? Well, time to call AppleCare, I guess.

  • Unable to load the data into Cube Using DTP in the quality system

    Hi,
    I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
    I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
    Please suggest .
    Thanks,
    Satyaprasad

    Hi,
    Some Infoobjects are missing while collecting the transport.
    I collected those objects and transported ,now its working fine.
    Many Thanks to all
    Regards,
    Satyaprasad

  • Unable to load LabVIEW VI into TestStand using LV Run Time only

    I'm unable to load some of my VIs into TestStand from LabVIEW.  I am using:
    TestStand 4.2.1
    LabVIEW 2010
    I have the appropriate patches installed for both TestStand and LabVIEW, and I still get the error.
    Attached is a message that I get when I hover over the "!" to explain my error.  The VI has the "Simple Error Handler.vi" as part of the build, and when I eliminate this VI from my VI, TestStand then loads correctly.
    Thanks,
    Eric
    Solved!
    Go to Solution.
    Attachments:
    TestStand_LoadError_Hover.png ‏16 KB

    This fixed my issue as well. Thank you for posting this. I have repaired LabVIEW 2010 sp1, LabVIEW FPGA, LabVIEW RT, DAQmx, and VISA 5.0. These are not small programs to do repairs on. Even after doing all of these repairs I still had issues with just labview coming up.
    Just by clicking on my lv shortcut to run the labview.exe I would get a loading screen for gws_int.vi This was before opening any projects or VI's. Labview was having many issues. Once the loading vi screen went away the standard labview 2010 startup page was present. But this page was dysfunctional. For example if you clicked tools and then options it would just totally crash LabVIEW, no error message or warning.
    Many people are suggesting to mass compile to fix this, but that is not an option. If you went to tools>advance>mass compile the same loading vi screen would come up (pic A), but then the mass compile program would have a broken arrow (pic b) I included a image to show people this. 
    The error list will always pop up, but there are no errors.
    I called NI tech support and they suggested that I repair all of my programs starting with the largest programs first. During the repairs I found this forum. I have over 30 different NI modules installed on this machine, I would have been at this for the next two days.
    Thank you very much for this.
    A good question is why didn't the repairs of these large programs find this, and would any repair of any module have fixed this?
    Attachments:
    b.png ‏116 KB
    a.png ‏46 KB

  • Unable to add custom tab in ME21N using BADI ME_GUI_PO_CUST

    Dear All,
    I need one extra tab in Item Details of ME21N.
    This extra tab should have two fields of my own.
    I have put the coding in the SUBSCRIBE method of the implementation of the BADI ME_GUI_PO_POST as follows:
    data: ls_subscriber like line of re_subscribers.
    we want to add a customer subscreen on the item detail tab
      check im_application = 'PO'.
      check im_element     = 'ITEM'.
    each line in re_subscribers generates a subscreen. We add one subscreen in this example
      clear re_subscribers[].
    the name is a unique identifier for the subscreen and defined in this class definition
      ls_subscriber-name = 'Event Details'.
    the dynpro number to use
      ls_subscriber-dynpro = '0001'.
    the program where the dynpro can be found
      ls_subscriber-program = 'SAPLMEPOBADIEX'.
    each subscreen needs his own DDIC-Structure
      ls_subscriber-struct_name = 'ZSM_PO_STRUC'.
    a label can be defined
      ls_subscriber-label = 'Event ID'.
    the position within the tabstrib can be defined
      ls_subscriber-position = 5.
    the height of the screen can be defined here. Currently we suport two screen sizes:
    value <= 7 a sevel line subscreen
    value > 7  a 16 line subscreen
      ls_subscriber-height = 7.
      append ls_subscriber to re_subscribers.
    I put breakpoints in the implementation of the method, and it is going into it, yet the extra tab is not getting displayed on the screen.
    Please give your suggestions on this.
    Regards,
    Prosenjit.

    Hi Prosengit,
    I am not aure about u r BADI,
    BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
    IN thi senhancement u have thrre screen exits.In this enhancement
    SAPMM06E        0111 CUSTSCR1 SAPLXM06        0111 Subscreen: PO item
    u can add subscreen and u can add u r own fields here .
    and u can write u r code in 'EXIT_SAPMM06E_006'.
    if u want to change the title of the program.
    Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
    I hope this solves u r problem.

Maybe you are looking for