Add remote system to SLD

Hi folks,
I have a SLD set up to use the R/3 backend on the same server. I've also added another R/3 backend to the technical systems, so I can set up a JCO to use this. When I try to set up a JCO with the new backend and try to ping it I get the following error:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=trel-p40 GROUP=PUBLIC R3NAME=SOE MSSERV=sapmsSOE PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsSOE' unknown TIME Thu May 31 12:43:10 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE nixxhsl.cpp LINE 776 DETAIL NiHsLGetServNo: service name cached as unknown COUNTER 1
As I can see the JCO points to my local R/3 not to the remote one. So here's my question: How do I tell the SLD that my newly added technical system is in some onther place. I've added the hostnames respectivly but I can't see how the sld would know where to look for a hostname that's not part of the local domain.
Any help would be highly appreciated!
Thanks in advance,
Robert

Sure, so here's what I'm trying to do: I have a development system consistion of an ERP 5 plus Portal 6.0 and all nessaccery components. I'll use this system to develop webdynpro apps and get them running in the portal.
It's basically just prototypes but in order to give some customers the big picture I wanna connect my webdynpro apps to the customers R/3 for a live presentation with real data.
The Connection runns over JCOs implementing the SLD destination and login data for the remote system (customer side). The remote R/3 just holds an functional package (don't know how it's called in English) that's RFC enabled.
So now I'm facing the problem: How do I get the remote system to be accessable by my JCOs. My thought was just add it in the SLD as a technical system.
As you can see I'm lacking basic understanding of SLD. Maybe you could set me on the right track?

Similar Messages

Unable to add remote system into cluster using osx 10.5.2

About a month ago, I had a quartermaster managed compressor cluster setup with three (3) systems. I was running FCP 6.0. on one system with quartermaster on that system managing the cluster. Compressor, quatermaster, and quicktime were installed on the other systems. All systems were running osx 10.5. FCP 6.0 suite tools was installed on one system. One of the systems was an intel and I had a two (2) instances setup as well as a virtual cluster on the intel. All worked perfectly.
All machines were upgraded, to the latest quartermaster, compressor, quicktime, and osx 10.5.2 with the leopard graphics updates.
Now I can no longer join the remote systems into the cluster. On these systems I have share and managed set, for both rendering and compressor. Yet in quartermaster they only show up as rendering nodes. If I remove the shared option, then the nodes appear as a unmanaged compressor service. But they are greyed and cannot be added to a cluster.
Before the update, they would display in quartermaster as both rendering and compressor services and could be added to a managed compressor cluster.
Did the updates break something or is there a new requirement that I am missing?
thanks

I'm having exactly the same problem on multiple machines, both Intel octocore and G5 quadcore. I'm running 10.5.4 with all the latest updates on all machines. Everything was working, now we can't drag any of the machines into a cluster to make a new one. Like you say, they only appear if Managed is unchecked (on the machine providing the QMaster service), and then are still greyed out, and not draggable. And you can't save a cluster without specifying the cluster controller, which you can't because nothing can be dragged in. The nodes appear to be unlocked (although the icon isn't very obvious), but even if they're locked, there is no password entry that pops up when clicked, and none have a password set in their QMaster System Preferences.
To test, I did a totally 100% fresh pristine Leopard install and a dual G5, ran all OS upgrades, then did a fresh FCP Studio 2 install, and ran upgrades again and repaired permissions just for good measure. No dice. Exactly the same problem as on the other machines. This is a brand new install and it doesn't work!
Very frustrating problem and I can't believe more people aren't seeing it. Totally fresh install, what else can be done? Well, time to call AppleCare, I guess.

Unable to add SAP system to SLD

Hi all,
I am trying to add a new SAP WEB AS 640 system to my SLD.
But the SLD only shows latest available Product version as 620.
I downloaded the latest cimsap,CR_Content,CR_Delta zip files from the marketplace.
On applying note 669669, import of cimsap.zip file is successful, but import of latest CR_Content file gives following error: <b>"The content version 2.0 of the full import does not fit to the current content of the target namespace."</b>
I am unable to add the SAP system. What should I do?
Regards,
Puloma.

Hi Puloma,
Follow the steps specified in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/5f7ecd8ddc454ca86ff6e53919b0d1/content.htm
Please reward appropriate points.
Bala
Message was edited by: Bala Krishnan

How to configure AS400 System in SLD

Hi,
Am in need to configure AS400 system into SLD. Driver and connection are done. Am in need to add the system into SLD.
do we need to add AS400 DB2 system as the third party system?

Prem,
It depends upon your client standards and SLD naming conventions. If there are mulitiple interfaces to this system, then I would create a 3rd party business system in SLD. After creating you need to assign the corresponding target system, so that when you transport it will take care. Once created you need to import it into your configuration and do your interfaces configuration accordingly.
Regards,
---Satish

No Installed Products while adding Technical System in SLD!

Hello,
I am trying to add Technical Systems in SLD. when I was at the point to select the software components, I am not seeing any installed products on the left side.
I already gave the ABAP system details in the previous screens, in this wizard.
Why is it that I am not seeing any installed products.
Thanks
Srinivas

Hi Jazz,
Here are the errors I am getting.
Import finished with 72 errors
Errors:
CIM_ERR_FAILED: CIM qualifier Alias is currently not supported by this implementation
QUALIFIER.DECLARATION Alias
CIM_ERR_FAILED: CIM qualifier BitMap is currently not supported by this implementation
QUALIFIER.DECLARATION BitMap
CIM_ERR_FAILED: CIM qualifier BitValues is currently not supported by this implementation
QUALIFIER.DECLARATION BitValues
CIM_ERR_FAILED: CIM qualifier Composition is currently not supported by this implementation
QUALIFIER.DECLARATION Composition
CIM_ERR_FAILED: CIM qualifier Counter is currently not supported by this implementation
QUALIFIER.DECLARATION Counter
CIM_ERR_FAILED: CIM qualifier Delete is currently not supported by this implementation
QUALIFIER.DECLARATION Delete
CIM_ERR_FAILED: CIM qualifier Deprecated is currently not supported by this implementation
QUALIFIER.DECLARATION Deprecated
CIM_ERR_FAILED: CIM qualifier DN is currently not supported by this implementation
QUALIFIER.DECLARATION DN
CIM_ERR_FAILED: CIM qualifier Expensive is currently not supported by this implementation
QUALIFIER.DECLARATION Expensive
CIM_ERR_FAILED: CIM qualifier Experimental is currently not supported by this implementation
QUALIFIER.DECLARATION Experimental
CIM_ERR_FAILED: CIM qualifier Gauge is currently not supported by this implementation
QUALIFIER.DECLARATION Gauge
CIM_ERR_FAILED: CIM qualifier Ifdeleted is currently not supported by this implementation
QUALIFIER.DECLARATION Ifdeleted
CIM_ERR_FAILED: CIM qualifier In is currently not supported by this implementation
QUALIFIER.DECLARATION In
CIM_ERR_FAILED: CIM qualifier Invisible is currently not supported by this implementation
QUALIFIER.DECLARATION Invisible
CIM_ERR_FAILED: CIM qualifier Large is currently not supported by this implementation
QUALIFIER.DECLARATION Large
CIM_ERR_FAILED: CIM qualifier MaxValue is currently not supported by this implementation
QUALIFIER.DECLARATION MaxValue
CIM_ERR_FAILED: CIM qualifier MinLen is currently not supported by this implementation
QUALIFIER.DECLARATION MinLen
CIM_ERR_FAILED: CIM qualifier MinValue is currently not supported by this implementation
QUALIFIER.DECLARATION MinValue
CIM_ERR_FAILED: CIM qualifier Nonlocal is currently not supported by this implementation
QUALIFIER.DECLARATION Nonlocal
CIM_ERR_FAILED: CIM qualifier NonlocalType is currently not supported by this implementation
QUALIFIER.DECLARATION NonlocalType
CIM_ERR_FAILED: CIM qualifier NullValue is currently not supported by this implementation
QUALIFIER.DECLARATION NullValue
CIM_ERR_FAILED: CIM qualifier Octetstring is currently not supported by this implementation
QUALIFIER.DECLARATION Octetstring
CIM_ERR_FAILED: CIM qualifier Out is currently not supported by this implementation
QUALIFIER.DECLARATION Out
CIM_ERR_FAILED: CIM qualifier PropertyUsage is currently not supported by this implementation
QUALIFIER.DECLARATION PropertyUsage
CIM_ERR_FAILED: CIM qualifier Provider is currently not supported by this implementation
QUALIFIER.DECLARATION Provider
CIM_ERR_FAILED: CIM qualifier Read is currently not supported by this implementation
QUALIFIER.DECLARATION Read
CIM_ERR_FAILED: CIM qualifier Schema is currently not supported by this implementation
QUALIFIER.DECLARATION Schema
CIM_ERR_FAILED: CIM qualifier Source is currently not supported by this implementation
QUALIFIER.DECLARATION Source
CIM_ERR_FAILED: CIM qualifier SourceType is currently not supported by this implementation
QUALIFIER.DECLARATION SourceType
CIM_ERR_FAILED: CIM qualifier Static is currently not supported by this implementation
QUALIFIER.DECLARATION Static
CIM_ERR_FAILED: CIM qualifier Syntax is currently not supported by this implementation
QUALIFIER.DECLARATION Syntax
CIM_ERR_FAILED: CIM qualifier SyntaxType is currently not supported by this implementation
QUALIFIER.DECLARATION SyntaxType
CIM_ERR_FAILED: CIM qualifier Terminal is currently not supported by this implementation
QUALIFIER.DECLARATION Terminal
CIM_ERR_FAILED: CIM qualifier TriggerType is currently not supported by this implementation
QUALIFIER.DECLARATION TriggerType
CIM_ERR_FAILED: CIM qualifier UnknownValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnknownValues
CIM_ERR_FAILED: CIM qualifier UnsupportedValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnsupportedValues
CIM_ERR_FAILED: CIM qualifier Write is currently not supported by this implementation
QUALIFIER.DECLARATION Write
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property ScheduledStartTime
CIM_Job
CIM_ERR_FAILED: Unknown qualifier Write found in property DeleteOnCompletion
CIM_JobSettingData
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_ConcreteJob: CIM_Job
CIM_ConcreteJob
CIM_ERR_FAILED: Unknown qualifier Write found in property EnabledDefault
CIM_EnabledLogicalElement
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_System
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_Service
CIM_ERR_FAILED: Unknown qualifier Gauge found in property AvailableSpace
CIM_FileSystem
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property array PowerManagementCapabilities
CIM_ComputerSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property NumberOfUsers
CIM_OperatingSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property FileSize
CIM_LogicalFile
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property PowerManagementSupported
CIM_LogicalDevice
CIM_ERR_FAILED: No such override property in superclass CIM_System: EnabledState
CIM_ApplicationSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property WorkingSetSize
CIM_Process
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_LogicalPort: CIM_LogicalDevice
CIM_LogicalPort
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_Processor: CIM_LogicalDevice
CIM_Processor
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkAdapter: CIM_LogicalDevice
CIM_NetworkAdapter
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkPort: CIM_LogicalPort
CIM_NetworkPort
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_OSProcess
CIM_OSProcess
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FRUIncludesProduct
CIM_FRUIncludesProduct
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_ProductParentChild
CIM_ProductParentChild
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FileStorage
CIM_FileStorage
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class CIM_ProvidesServiceToElement
CIM_ProvidesServiceToElement
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_RunningOS does not exist.
CIM_RunningOS
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_SystemDevice
CIM_SystemDevice
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_BootOSFromFS does not exist.
CIM_BootOSFromFS
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property CompiledBits
SAP_BCApplicationServer
CIM_ERR_FAILED: Unknown qualifier STATIC found in property AccSldModelVersion2
SAP_ACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterface: CIM_NetworkPort
SAP_ACENetworkInterface
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_JCODestination
SAP_JCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_MsgServJCODestination
SAP_MsgServJCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_AppServJCODestination
SAP_AppServJCODestination
CIM_ERR_FAILED: Class SAP_ACENetworkInterface referenced by association SAP_ACENetworkToNetworkInterface does not exist.
SAP_ACENetworkToNetworkInterface
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_ACEAssociatedVirtualizationManager does not exist.
SAP_ACEAssociatedVirtualizationManager
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_HostedACEEngine does not exist.
SAP_HostedACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterfaceComponent: CIM_SystemDevice
SAP_ACENetworkInterfaceComponent

Add java system on another SLD

Hi,
I would like to add a sap portal (JAVA) System to solution manager sld. I did add abap system correcet on sld, But when I go to sld -> Home-> Technical Systems -> New Technical System -> And choos Web As Java. . I can just choos Abap and not Java.
Any help.
Regards

Hi Sunny,
Thanks for reply.
My Sap portal (Java) already points on my PI SLD.
Is it posible to add a sap portal or a SAP java applican server to solman SLD on Technical Systems part as we do for abap applican server?
Thanks

Syndicating based on Addition of a Remote System Key

Hi
We have a distributed system syndication scenario where we need to syndicate a record automatically when a remote system key is added to an existing harmonized record in MDM. By adding the Remote System Key, it essentially means the remote system is 'subscribing' to the new harmonized record.
Is there any way to fire off a syndication event when a new remote system key is added to a record? It seems that MDM currently only flags a record as ready to be syndicated when a value changes in one of the fields of that record - it doesn't seem to identify the addition of a new system key to the record as a change to the record.
Thanks for your assistance in advance.

Hi Ravi
Thanks for the reply. The current view is that we were going to add it manually as a remote system key mapping, as the material record would already exist and would have been harmonized in mdm - so no need to add it through an import map. The scenario is that the master record already exists and another system wishes to also receive this record. Any thoughts on what options do we have if we go this approach?
Also, is their anyway to indicate if a remote system key is added for a new system to an existing mdm material, to indicate when syndicating that the record being sent is a 'Create' record - and hence only to syndicate it to the new remote system added and not to the other systems which also have remote key's against that record?
Thanks
Costa

"Program terminated in remote system NONE: Logon failed" when adding a new table

Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
Christian

First thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
 One monitoring job (master job)
 One master controller job
 At least one data load job
 One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
 At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
 Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
 The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
 Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
 The Number of required data transfer jobs ,
 plus one background work process for Central Master (Monitoring) Job (only one per system!),
 plus one background work process for Master Controller Job,
 plus 3-5 additional empty background work processes (recommended per configuration),
 plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian

Unable to Edit/Remove Remote Systems using MDM 7.1

Unable to find an answer to this in either the forums or the Wiki...
Using MDM 7.1 through the SAP MDM Console 7.1.03.54
I can add a new Remote System, it comes up with the default values for the Remote System fields:
Name: New Remote System, Code: NewRemoteSystem, Type: Inbound, Key Generation: None
But I cannot modify the field values nor can I delete the Remote System.
The right-click context menu always has 'Delete Remote System' greyed out.
Nor do I see any mechanism to modify the fields' values. Moving to the Remote System Detail pane, none of the fields are edittable; I have tried left-clicking, right-clicking, double clicking, using the Edit tool bar menu - nothing lets me edit these fields.
My user account has the Admin role. Looking to the Admin role, it has Execute for all functions, and Read-Write to the Remote Systems in the Tables and Fields tab.
Any help would be appreciated.

Hi Andrew,
Your repository should be in unloaded state to make changes in any table whether main table, subtable, Ports, Special tables or Remote Systems table etc. As you want to make changes in your repository Remote Systems, please unload your repository->Go to Admin>Remote systems>Make necessary changes (Add/Delete/update)--> Then load repository.
Note: You can only add User and Roles during Repository loaded state.
Regards,
Mandeep Saini

Consuming Orchestration Exposed WCF service On remote system.

Hello All , I am new to BizTalk, so bear with me
I have created an orchestration for Insert operation to DB and Exposed it as WCF service, finally deployed in IIS fine.
but whenever I am trying browse wsdl of service its prompting as : Network Error (dns_unresolved_hostname)
Your requested host "DomainName" could not be resolved by DNS.
url : http://domainName/Biztalk_PaymentTransaction_Process_PaymentTransaction_Port_RcvTransaction.svc?singleWsdl .
I just replaced that domainName and put IP there I am able to browse my service, worked fine on Local system.
but while trying with same url replacing domainname with
IP on remote system, its throwing Exception as below
There was no endpoint listening at http://DomainName/Biztalk_PaymentTransaction_Process_PaymentTransaction_Port_RcvTransaction.svc
that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
please Explain what I need to do to resolve this,
Do I'm missing something or what extra I need to DO...
Thanks to all.

Associate the domain name and the IP of the server where the service is hosted in the host file.
Goto the server where the service is hosted.
Goto the server’s host file in %SystemRoot%\system32\drivers\etc\hosts
Take a backup of the host file before you edit it.
Add the following entry as the last line in the host file, replacing in it with the actual IP Domain name.
xxx.xxx.xxx.xxx YourdomainName.com
where xxx.xxx.xxx.xxx = IP and YourdomainName.com = domain name
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Can you clone Remote System key mappings?

We have 2 Remote Systems set up for our MDM repository with key mappings for 60 tables. I now need to add an additional Remote System which is similar to one of the existing ones, but with a few different values. Is there any way I can clone the existing one or do I have to go through all 60 tables one by one, export the info, edit it to show the new Remote System name and re-import it? I have searched the sources but can't find anything on this precise topic.
Thanks for any help you can give.
Peter Croft

Peter,
No you cannot.
Prepare a source having Just two columns ex., new Remote Keys of the system and an common identifier field in the table which you are planning to import with the data. Import it and get it to the data manager as records with just two fields(Remote Key and Common identifier). If you have the import maps already stored for the tables when you have done for the previous imports for the other two remote systems, use them and automate the importing process for this particular remote system (via port configuration in console and Data manager) for the remaining fields of the table.

Instrument readings in Veristand with a remote system

I am new to National Instruments hardware and Veristand and I'm trying to use an instrument with Veristand to see if I can get readings from that instrument. I am using a PC with Windows Vista and I'm connected through a network to a PXI 8108 controller in a PXI 1050 chasiss. The instrument is just a thermocouple which I am using to get familiar with everything. The thermocouple is connected to the SCB-68 connector block which is connected to a PXI 6221 multifunction DAQ in the chassis. I am able to create a task in MAX under remote system and everything seems to work. What I want to do is to get the readings into Veristand, and I'm not sure if I need to create a custom device that is linked to the DAQ somehow or if there's some other way to do this. I've created the DAQ device in the system explorer but I don't see any way of linking it to the actual DAQ device on the remote system. I'm wondering if someone can help with this.
Any advice is appreciated.
Thanks
Solved!
Go to Solution.

You can read your thermocouple channel value directly from VeriStand, but the process is different than using MAX.
In System Explorer, add your DAQ device that is cabled to your SCB-68. Make sure you specify the same name (i.e. "Dev1") that is in MAX. Also make sure you've imported the device channel that is hooked up to the thermocouple (i.e. "ai0"). There's no way in System Explorer to specify that this channel should have thermocouple scaling. VeriStand will initially sample this channel value as a raw voltage value. You can, however, set the high and low limit for this channel to something small like +/- 1V, since thermocouples have very small readings.
You add the scale to your system separately after deploying the System Definition you created to the RT Target. You do this by connecting to the target using the Workspace and selecting the Workspace tool from the Tools menu called the Channel Scaling and Calibration Manager.
In this dialog you will see your DAQ channel listed. Navigate through this dialog to assign an appropriate thermocouple scale to your channel. Once this is done, the target will remember the scale for this channel until you overwrite it.
Let me know how this goes...
Jarrod S.
National Instruments

Error while exporting the 3rd party technical system in SLD

Dear all,
    We're currently using PI 7.0. When trying to export the technical system in SLD, after the exporting, the IE jumps to the download page automatically, but there's a exclamation mark with no text info. I've tried to create a new 3rd-party technical system and try to export, the same thing happened.
    It happened in both our develop and our production PI system.
    Also I've found following error info in SLD server log:
Log Record Details
#33 04/19/2007 10:07:38.573 [SAPEngine_Application_Thread[impl:3]_33]
ERROR com.sap.sld.wd.technicalsystem.ExportView: null
Thrown:
java.lang.UnsupportedOperationException
at java.util.AbstractCollection.add(AbstractCollection.java:216)
at java.util.AbstractCollection.addAll(AbstractCollection.java:319)
at
com.sap.lcr.webui.admin.ImportExportControl.addAssociatorAndReferenceNames(ImportExportControl.java:1244)
at com.sap.sld.wd.technicalsystem.ExportView.getBCSystemExportList
(ExportView.java:285)
at com.sap.sld.wd.technicalsystem.ExportView.getExport
(ExportView.java:193)
at com.sap.sld.wd.technicalsystem.wdp.InternalExportView.getExport
(InternalExportView.java:137)
at
com.sap.sld.wd.technicalsystem.wdp.IPrivateExportView$IContextElement.wdGetObject(IPrivateExportView.java:208)
at com.sap.tc.webdynpro.progmodel.context.AttributePointer.getObject
(AttributePointer.java:158)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
(DataContainer.java:1092)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
(DataContainer.java:1064)
at
com.sap.tc.webdynpro.clientserver.uielib.standard.impl.FileDownload._getData(FileDownload.java:81)
at
com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FileDownloadAdapter.getReference(FileDownloadAdapter.java:291)
at com.sap.tc.ur.renderer.ie6.LinkRenderer.render(LinkRenderer.java:53)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
(GridLayoutRenderer.java:336)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
(GridLayoutRenderer.java:79)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.ur.renderer.ie6.GroupRenderer.renderGroupFragment
(GroupRenderer.java:1184)
at com.sap.tc.ur.renderer.ie6.GroupRenderer.render
(GroupRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
(FlowLayoutRenderer.java:210)
at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
(FlowLayoutRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
(FlowLayoutRenderer.java:210)
at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
(FlowLayoutRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
(GridLayoutRenderer.java:336)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
(GridLayoutRenderer.java:79)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.UiWindowRenderer.render(UiWindowRenderer.java:52)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendHtml
(HtmlClient.java:1039)
at
com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.fillDynamicTemplateContext(HtmlClient.java:455)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:1223)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:1179)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:299)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.finishTasks
(AbstractClient.java:173)
at
com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
at
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:753)
at
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing
(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent
(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost
(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:387)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:365)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:160)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Hope you can help us.
Thanks and B'Rgds,
YiNing

not sure if it has relevance, but the SLD level transports will do nothing but create a CIM file which should be downloaded to your deskktop.
1. Make sure that there are no Pop Up BLocker's acting on the XI server on your machine.
2. Make sure that you have the download authorizations on your machine.
Regards
Bhavesh

RIO server could not be found on the specified remote system

When trying to add a cRIO9074 to an empty project, I get the following message:
The RIO server could not be found on the specified remote system. Ensure that NI-RIO software is installed and that the RIO server is running and properly configured.
But when installing software from MAX I cannot find anything called NI-RIO. I am using LabVIEW 2012 + Realtime 2012.
As a result of this, I can't see the modules in the project window. However, I can deploy code to the cRIO that doesn't use any input or output.

I am getting the same message, I am using NI sb-RIO 9611. Using LabVIEW 13, NI RIO 13, RIo Device driver (most recent), Configured the IP of the device from NI MAX, Installed the software in the remote target.
Attachments:
ERROR.png ‏192 KB
Device Setup.png ‏136 KB

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

Add remote system to SLD

Similar Messages

Maybe you are looking for