Unable to adjust column mapping

Hi,
I have an LOV where I've 4 items from the same table DONOR_TAB
COLUMN NAMES RETURN ITEM
FIRST_NAME DONOR_TAB_BLK.FIRST_NAME
DONOR_CODE DONOR_TAB_BLK.DONOR_CODE
MIDDLE_NAME DONOR_TAB_BLK.MIDDLE_NAME
LAST_NAME DONOR_TAB_BLK.LAST_NAME
I need to add one more item to the LOV
CITY_NAME DONOR_TAB_BLK.CITY_NAME
All the above reside in the same block DONOR_TAB_BLK
CITY_NAME is in the block where all the previous 4 items reside i.e FIRST_NAME,DONOR_CODE,MIDDLE_NAME,LAST_NAME.
But CITY_NAME belongs to CITY_MASTER_TAB table whereas the previous 4 items belong to DONOR_TAB table.
When i add CITY_NAME to the record group for LOV and compile , i get the message "Unable to adjust column mapping for form ouptut"
Why is this? I know i've committed some error somewhere but i'm not sure where.
Can u help me?

Are you using Designer to add LOV to a Module Diagram and then generate a Form?
Or are you using Forms Builder to create record group for LOV?

Similar Messages

"Unable to adjust form for output" err msg

When attempting to compile a form, using either forms builder or
compiler, I get the following error message:
FRM-30085: Unable to adjust form for output.
When looking up the error code, I see:
Cause: The LOV name referenced does not exist.
Action: Specify another LOV name, or delete the reference.
FRM-30085: Unable to adjust form for output.
Any ideas out there?

Check all LOVs. Some of LOVs return values in non-existing
fields. Open LOV properties and go to "Column mappings" and
check Return Items for all fields in every LOVs.

Some '???' appeared in the LOV Column Mapping window ...only

Hi,
I installed the Forms6i with the patch 12 on Windows XP platform. The installation language is Greek. The only problem i have faced up with the installation is the appearance of some question marks in LOV Column Mapping window ... instead of the Greek translation of the phrases:
Column Names ,
Return Item ,
Display Width ,
Column Title
Is there a specific Windows font that should be installed ....or something else...????
Thanks,,,,
Sim

You have to do it from the source code. Click on source, you will find "<xsl:if test="">".
Define your condition in test="/tns:input1=/tns:input2" or check if you source string contains "abcd", i.e. xsl:if test="contain(/tns:source_column1,'abcd')"
hope this will help

Unable to open Information Map from planning web Help menu

Unable to open Information Map from planning web Help menu
The error is :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Hi,
It should be accessing :- http://<planning server>:8300/HyperionPlanning/help/en/hp_information_map/hp_information_map.html
Can you access that address on the machine hosting planning?
The file structure on the web server depending on which app server you use should be something like \Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\help\en\hp_information_map\hp_information_map.html
Cheers
John
http://john-goodwin.blogspot.com/

Unable to view the map in Topology

Hi Team,
Problem: In the NNMi console i am unable to view the map of container.
out of 10 container 9 are working, but 1 is having problem.
The error i am getting is " Could not compute the map view response due to exception"
Regards,
Prashanth

You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

OBIEE 10g repository - Business model - logical table to physical table, column mapping is empty

Hi, I am really new to OBIEE 10g.
I already set up a SQL Server 2005 database in Physical and import a view vw_Dim_retail_branch.
The view has 3 columns: branch_id, branch_code, branch_desc.
Now I want to set up the Business model to map this physical table (view).
I created a new Business model
Added new logical table Dim_retail_branch
In the sources, added the vw_Dim_retail_branch as source table.
But in the Logical table source window, column mapping tab, it's blank. I thought it should be able to identify all the columns from vw_Dim_retail_branch, but not. The show mapped columns is ticked.
What should I do here? Manually type each column?

HI,
Just you can drag and drop the columns from physical layer to BMM layer.
Select the 3 columns and drag and drop it to the created logical column in BMM layer.
for more reference : http:\\mkashu.blogspot.com
Regards,
VG

Unable to adjust bass/treble, and channels are coming out of both-Audigy SE model: SB0

Greetings. I just installed a fresh new copy of Windows XP Professional-- and decided it was a good idea to upgrade from my Li've! value from 999 to a better sound card...At least so?I hoped. I purchased this card from Wal-Mart the other night, and if it's anything like the other sound cards purchased at mega-retailers, I am going to be in for a huge headache, aren't I?Anyway, to the point:? When I run creative diagnostics, both the left, and the right channel, come out of the left and right, and right and left channel, respecti'vely... I can take one ear off left, and hear "left channel" in my right channel, and vice versa. Problem #2: I am unable to adjust my bass or my treble on the sound card. I checked the FAQ, but I didn't see anything terribly relevant, unless of course I am just blind. I look forward to any help I can get from you great peoples. Thank you for reading my message. SkylerakaJaldarith

What about the inability to adjust bass and treble? I google'd a bunch of different phrases about Audigy SE cards, and it seems they don't have that functionality. Am I missing something here?I installed the EAX control panel and that didn't help. Edit: Okay, so the left and right channel part is my problem-- but I have a headset by Sennheiser that has such a small headphone jack, it has to be halfway plugged into the sound card, in order for me to get full audio. I'll see if I can get that taken care of. The bass and treble still bother me though. Message Edited by Jaldarith on 2-07-200605:5 PM

Warning in WD ABAP Table - Master Column Mapping deprecated

Hi ,
I am getting a warning 'Master Column Mapping deprecated' in a WD ABAP component while activating it .
Can anybody suggest what I have to do to solve this issue .
Best Regards
Sid

Hi,
Could you please tell me how to take Row Arrangement in Master Column?
Cheers
Harkesh Dang

Column-map in weblogic-cmp-rdbms-jar.xml

Hi,
How to specify column-map for the following database tables:
Table1: id,col2,col3. Primary key - id.
Table2: m_id,description,col4,col5. Primay key - (m_id,col4).
The relationship I specified is table1-has-many-table2. This is a 1 to m relation
and
Table1.id = Table2.m_id.
I specified the following column-map
<column-map>
<foreign-key-column>m_id</foreign-key-column>
<key-column>id</key-column>
</column-map>
But the server is throwing an exception that all the columns in table2 should
me mapped.
But in this case, I can join the tables with just id only. What should I specify
for col4 map?.
I can just reverse the mapping, but I am trying to test the boundaries of weblogic
server.
Is this case handled in weblogic server implementation?.
I am testing relationship-role-map for ejb2.0 on weblogic server8.1 beta version.
Thanks,
Sathish

Hello Sathish,
Glad to help! Have a wonderful week.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Sathish Kandacharam" <[email protected]> wrote:
>
Hi Ryan,
Thanks alot. That example helped alot.
Thanks,
Sathish
"Ryan LeCompte" <[email protected]> wrote:
Hello Sathish,
Please refer to the sample code that comes packaged with BEA WebLogic
Server for
examples of how the weblogic-cmp-rdbms-jar.xml file should look forall
of the
various relationships. In particular, look at the Bands example.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Sathish Kandacharam" <[email protected]> wrote:
Hi,
How to specify column-map for the following database tables:
Table1: id,col2,col3. Primary key - id.
Table2: m_id,description,col4,col5. Primay key - (m_id,col4).
The relationship I specified is table1-has-many-table2. This is
a
1 to m relation
and
Table1.id = Table2.m_id.
I specified the following column-map
<column-map>
<foreign-key-column>m_id</foreign-key-column>
<key-column>id</key-column>
</column-map>
But the server is throwing an exception that all the columns intable2
should
me mapped.
But in this case, I can join the tables with just id only. Whatshould
I specify
for col4 map?.
I can just reverse the mapping, but I am trying to test the boundaries
of weblogic
server.
Is this case handled in weblogic server implementation?.
I am testing relationship-role-map for ejb2.0 on weblogic server8.1
beta version.
Thanks,
Sathish

Help for adjusting columns of a JTAble in a Table Model

Hello community,
In order to have a good display of by DataBase in a JTable, I've wrote some code to adjust columns in function of datas. Those datas are displayed with a TableModel ( which I've declared in a class JDBCAdapter ).
When I start my application, I call adjustColumns(), and all is great but when I add information to my DB and display it, the columns of my JTable return to default width...
So I want to incorporate my function adjustColumns in my TableModel, and I need help...
     void adjustColumns()
     // Ajuste les colonnes aux donnes pour que tout soit visible
     int nbRow,nbCol;
     nbRow = JTable1.getRowCount();
     nbCol = test.getColumnCount();
     for ( int i = 0; i < nbCol; i++ )
     com.sun.java.swing.table.TableColumn column = null;
     column = JTable1.getColumnModel().getColumn(i);
     int dataLength = 0;
     for ( int j = 0; j< nbRow; j++ )
     FontMetrics fm;
     int dataLengthTmp;
     String valueTable;
     fm = JTable1.getFontMetrics(JTable1.getFont());
     if ( test.getValueAt(j, i) == null )
     System.out.println("Valeur nulle...");
     dataLengthTmp = 0;
     else
     valueTable = test.getValueAt(j, i).toString();
     dataLengthTmp = fm.stringWidth(valueTable);
     System.out.println(valueTable + " = " + dataLengthTmp);
     if ( dataLengthTmp > dataLength )
     dataLength = dataLengthTmp;
     if ( dataLength != 0 )
column.setWidth(dataLength + 5);
else
column.sizeWidthToFit();
JTable1.setModel(test);
JTable1.repaint();
import java.util.Vector;
import java.sql.*;
import com.sun.java.swing.table.AbstractTableModel;
import com.sun.java.swing.event.TableModelEvent;
public class JDBCAdapter extends AbstractTableModel {
Connection connection;
Statement statement;
ResultSet resultSet;
String[] columnNames = {};
Vector rows = new Vector();
ResultSetMetaData metaData;
public JDBCAdapter(String url, String driverName,
String user, String passwd) {
try {
Class.forName(driverName);
System.out.println("Ouverture de la connexion a la base de donnee...");
connection = DriverManager.getConnection(url, user, passwd);
statement = connection.createStatement();
catch (ClassNotFoundException ex) {
System.err.println("Cannot find the database driver classes.");
System.err.println(ex);
catch (SQLException ex) {
System.err.println("Cannot connect to this database.");
System.err.println(ex);
public void executeQuery(String query) {
if (connection == null || statement == null) {
System.err.println("There is no database to execute the query.");
return;
try {
resultSet = statement.executeQuery(query);
metaData = resultSet.getMetaData();
int numberOfColumns = metaData.getColumnCount();
columnNames = new String[numberOfColumns];
// Get the column names and cache them.
// Then we can close the connection.
for(int column = 0; column < numberOfColumns; column++) {
columnNames[column] = metaData.getColumnLabel(column+1);
// Get all rows.
rows = new Vector();
while (resultSet.next()) {
Vector newRow = new Vector();
for (int i = 1; i <= getColumnCount(); i++) {
newRow.addElement(resultSet.getObject(i));
rows.addElement(newRow);
// close(); Need to copy the metaData, bug in jdbc:odbc driver.
fireTableChanged(null); // Tell the listeners a new table has arrived.
catch (SQLException ex) {
System.err.println(ex+" query = "+query);
public void executeUpdate(String query) {
if (connection == null || statement == null) {
System.err.println("There is no database to execute the query.");
return;
try {
statement.executeUpdate(query);
// close(); Need to copy the metaData, bug in jdbc:odbc driver.
fireTableChanged(null); // Tell the listeners a new table has arrived.
catch (SQLException ex) {
System.err.println(ex+" query = "+query);
public void close() throws SQLException {
System.out.println("Fermeture de la connection a la base de donnee... Bye !");
resultSet.close();
statement.close();
connection.close();
protected void finalize() throws Throwable {
close();
super.finalize();
// Implementation of the TableModel Interface
// MetaData
public String getColumnName(int column) {
if (columnNames[column] != null) {
return columnNames[column];
} else {
return "";
public Class getColumnClass(int column) {
int type;
try {
type = metaData.getColumnType(column+1);
catch (SQLException e) {
return super.getColumnClass(column);
switch(type) {
case Types.CHAR:
case Types.VARCHAR:
case Types.LONGVARCHAR:
return String.class;
case Types.BIT:
return Boolean.class;
case Types.TINYINT:
case Types.SMALLINT:
case Types.INTEGER:
return Integer.class;
case Types.BIGINT:
return Long.class;
case Types.FLOAT:
case Types.DOUBLE:
return Double.class;
case Types.DATE:
return java.sql.Date.class;
default:
return Object.class;
public boolean isCellEditable(int row, int column) {
try {
return metaData.isWritable(column+1);
catch (SQLException e) {
return false;
public int getColumnCount() {
return columnNames.length;
// Data methods
public int getRowCount() {
return rows.size();
public Object getValueAt(int aRow, int aColumn) {
Vector row = (Vector)rows.elementAt(aRow);
return row.elementAt(aColumn);
public String dbRepresentation(int column, Object value) {
int type;
if (value == null) {
return "null";
try {
type = metaData.getColumnType(column+1);
catch (SQLException e) {
return value.toString();
switch(type) {
case Types.INTEGER:
case Types.DOUBLE:
case Types.FLOAT:
return value.toString();
case Types.BIT:
return ((Boolean)value).booleanValue() ? "1" : "0";
case Types.DATE:
return value.toString(); // This will need some conversion.
default:
return "\""+value.toString()+"\"";
public void setValueAt(Object value, int row, int column) {
try {
String tableName = metaData.getTableName(column+1);
// Some of the drivers seem buggy, tableName should not be null.
if (tableName == null) {
System.out.println("Table name returned null.");
String columnName = getColumnName(column);
String query =
"update "+tableName+
" set "+columnName+" = "+dbRepresentation(column, value)+
" where ";
// We don't have a model of the schema so we don't know the
// primary keys or which columns to lock on. To demonstrate
// that editing is possible, we'll just lock on everything.
for(int col = 0; col<getColumnCount(); col++) {
String colName = getColumnName(col);
if (colName.equals("")) {
continue;
if (col != 0) {
query = query + " and ";
query = query + colName +" = "+
dbRepresentation(col, getValueAt(row, col));
System.out.println(query);
System.out.println("Not sending update to database");
// statement.executeQuery(query);
catch (SQLException e) {
// e.printStackTrace();
System.err.println("Update failed");
Vector dataRow = (Vector)rows.elementAt(row);
dataRow.setElementAt(value, column);
Thanks to help me.

Hi,
OK. I have read your code sample again. It looks like the JDBCAdapter class is reloading table data in the executeQuery method. Why not call adjustColumns at the end of this method after the new rows and columns are loaded? Perhaps it also should be called at the end of executeUpdate. Have you tried doing that?
I would still set
JTable1.setAutoCreateColumnsFromModel (false); to prevent Java from readjusting the size automatically at some other time.
regards,
Terry

REP-1510 Group manager unable to compute column

Hai all,
I am using oracle 6i report builder.I have created a matrix report with different type of grouping and i tried to add a slno in the matrix report.I used summary column for showing the Serial Number but the serial number is showing on the report when user has select only one item (fromitem=01 and toitem=01).when user has select more than one item (from item=01,toitem=10)it showing the error
'REP-1510 Group manager unable to compute column'.
How to solve this issue,how can create serial number in my matrix report

try this one
SELECT ROW_NUMBER() OVER (ORDER BY COLUMN_NAME) SLNO FROM TABLE_NAME;

Unable to fetch columns; Invalid state/No Suitable Driver

Hi!
I'm trying to populate a combo box with data from a MySQL database (or any other database for that matter), I create a JDBC connection source, and set the following:
URL = jdbc:mysql://localhost:3306/test
Driver = org.mysql.jdbc.Driver (i have also tried org.gjt.mm.mysql.Driver)
Username = anonymous
Password = <blank>
Next I create a NBJdbcRowSet and set:
Command = SELECT * FROM foo
Connection Provider = connectionSource1 (the above connection source)
Now if I click the elipses next to Default Column Values, I get the message 'Unable to fetch columns; Invalid State'
If I replace the NBJDBCRowSet with a NBCachedRowSet, the error becomes 'Unable to fetch columns; No Suitable Driver'.
The database is browseable in the runtime tab, and the table exists (I can run SQL queries and get the expected results). The anonymous account exists and has access to the tables in question (the same setup is used in a few different applications, all of which work fine). Using the root account gives the same results. Using the PointBase example database gives the same results:
Driver: com.pointbase.jdbc.jdbcUniversalDriver
URL: jdbc:pointbase:server://localhost:9092/sample
Details of setup:
OS: Windows XP Pro SP2
IDE: Sun Java Studio Enterprise 7 2004Q4
Java version in use: 1.4.2_05 (as packaged with the studio)
MySQL: v5.0.7-beta-nt
Connector: MySQL Connector/J 3.0.17-ga
PointBase: As came with Studio Enterprise
I should mention that I can get DB connectivity in my app, I can create a comboBox and set the model to 'nBCachedRowSet1: name' and the contents of that field appears in my comboBox, however I need to create about a dozen tables and I don't relish the thought of manually creating models for each one ;)
Any suggestions are appreciated!
Cheers!
Darren

Hi Thanks for your reply.
I've retried with PointBase and the Sample DB:
* New project. New JFrame.
* Create ConnectionSource, NBJdbcRowSet, ComboBox
* Config ConnectionSource:
- Driver: com.pointbase.jdbc.jdbcUniversalDriver
- URL: jdbc:pointbase:server://localhost:9092/sample
- Username/pass: as per PointBase setup
* Config NBJdbcRowSet
- ConnectionProvider: connectionSource1
- Command: SELECT * FROM CUSTOMERINFO
- Default Column Values: <open GUI>, <Fetch Columns>, "Unable to fetch columns; Invalid State"
So this is where I get the problem, I'm not sure if i've buggered it up though, so I continue to see if I can get data:
- Add Column: NAME
- OK, Close
* Config ComboBox
- Open Model dialog
- Select Mode: ComboBoxEditor
- RowSet: nBJdbcRowSet1 (this throws the error again)
- Column: NAME (entered manually, dropdown is empty)
- OK, Close
* Run app
Errors!
Seems like the GUI builder did something wrong - it generated a bunch of functions for each thing i added, like this:
public void setJComboBox1(JComboBox val) {
this.jComboBox1 = val;
and the project won't compile. I figure out it should be like this:
public void setJComboBox1(javax.swing.JComboBox val) {
this.jComboBox1 = val;
but the functions aren't doing anything anyway, so I delete them all. I'm starting to think my installation is borked.
Project now compiles and runs, but there's no data, and I get:
ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
At this point i should probably find the jar with that driver in it and mount this/add it to the classpath, but the boss has decided we'll use Borland Delphi 2005 .NET anyways, so I won't take this any further...
Thanks for your help guys!
Darren

Why can't you adjust column width in pages for ipad?

Why can't you adjust column width in pages for ipad?

It's just one of the many, many features that have been removed. It all appears to be deliberate, not an oversight. Leave feedback for the Pages team using the link in the Pages menu.

Why I am unable to adjust the ringer volume by the side buttons and there is no ringer with the Mute button OFF

With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons.
When someone calls/texts there is no sound coming from the speaker.
The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings. So i know that the speaker does work
Headphone jack seems clean and dust free
I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?

I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
Where as these keys are also working ok in music player of iphone for IOS 7, the only problem is for ringing.

Unable to adjust token privileges eventhough has all the priveleges granted

I've follow exactly the step listed in the documentation
on how to configure NTRealm
but then I will still get the same error message:
"Unable to adjust token privileges"
anyone who encounters such problem?
any help/hints from fellow weblogic user would be very appreciated
Honggo

honggo, you can go to http://support.bea.com/welcome.jsp and use the AskBEA
feature and type in "Unable to adjust token privileges?" and you will get
some newsgroup posting form NTRealm problems under the newsgroup search
result.
Joseph Nguyen
BEA Support
"honggo" <[email protected]> wrote in message
news:3c9edada$[email protected]..
>
I've follow exactly the step listed in the documentation
on how to configure NTRealm
but then I will still get the same error message:
"Unable to adjust token privileges"
anyone who encounters such problem?
any help/hints from fellow weblogic user would be very appreciated
Honggo

Unable to adjust column mapping

Similar Messages

Maybe you are looking for