Unable to adjust the indentation in Note tag

Hi,
I have used the NoteIndent tag for a Note in RH10 as follows. The text on the second line of Note appears on extreme left and I am not able to adjust the indentation of the second line.
What should I do, so that the word “and” appears exactly below the word “If”?

This sounds like you need to change your CSS to use a hanging indent for the style being used. See this thread for details:
http://www.ehow.com/how_2382848_hanging-indent-css.html
An alternative is to use a two columned table. Place the image in the left hand column and the text in the right column. Both options work.

Similar Messages

  • Why I am unable to adjust the ringer volume by the side buttons and there is no ringer with the Mute button OFF

    With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons. 
    When someone calls/texts there is no sound coming from the speaker.
    The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings.  So i know that the speaker does work
    Headphone jack seems clean and dust free
    I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
    When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
    If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?

    I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
    Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
    Where as these keys are also working ok  in music player of iphone for IOS 7, the only problem is for ringing.

  • Unable to Adjust the Auto Locking Facility in Noki...

    Unable to Adjust the Auto Locking Facility in Nokia C2-03, If anyone knows means please post the solution currently i am using v 07.63 version of frimware

    NothingNat wrote:
    There is no options like phone in settings...
    Did you check properly ..(Scroll down till the end) ??? 
    Menu --> Settings --> PHONE ... and there on ..

  • I am unable to adjust the Master volume in the Audio MIDI Setup utility.

    For either built-in Input or Output. The systems effected are:
    MacBook Pro, 13-inch, Mid 2012 (Mac OS X Lion 10.7.4 11E2617).
    iMac, 20-inch, Mid 2007 (Mac OS X Lion 10.7.4 11E53).
    The volume can otherwise be adjusted via the Sound sytem preferences or the volume control in the Finder's menu bar. I can even adjust the volume for the individual channels for Buil-in Input and Output within Audio MIDI Setup. It is only the Mater volume that can't be adjusted.
    Does anyone have any insight as to why this might be? Any assistance would be much appreciated.

    I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
    Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
    Where as these keys are also working ok  in music player of iphone for IOS 7, the only problem is for ringing.

  • Officejet pro 8500 a909n Unable to locate - The printer is not connected

    Something, unknown to me, must have recently changed with my printer and or my iMac and MacBook Pro.  I was suddenly unable to print.  When I attempt to print I get this icon on the dock:
    I then click on the icon and this is the window that is displayed:  
    I completed a #6 restart and restarted the computers.  I had no problem establishing a connection with the router, which is a Time Capsule.  On the OSX Printers and Scanners Page I initially had a green light, but after attempting to print the light changes to amber and states "in use Last Used".  If I turn off the wireless radio, I can connect using USB, but prefer to use wifi.  However, after I walk away from the computer for awhile and then come back to print I get the same message.
    Is there something I can do to fix this.
    Information
          Printer:
                                     Officejet Pro 8500 Premier (a909n)
          Computers:     iMac (fall 2013)
                                     MacBook Pro (2012)
          Operating System:
                                      OSX Mavericks
          Print Driver:
                                      HP Inkjet 3 Driver 4.1.0

    Hello there @UncleMonkey ,
    I read your post about the printer loosing it's connection and not printing or communication with your Mac.
    I have a suggestion for you!
    Click this link, and follow these steps. I have heard much success in this guide and hope it works for you too: Printer Does Not Maintain Wireless Connection
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I seem to be unable to find the list of keyword tags - HELP!

    I have been using keyword tags for years in previous versions of Photoshop Elements.  In version 12 at first I noticed that they were harder to apply.  But now, something has happened that has removed the list of tags.  How do I get them back??? (and where do I find out how to use them easily)?

    Hi,
    If you don't want to use the map functions then probably the best thing is to use keyword tags.
    Switch to Media view click on the + next to Keywords and select New Category. Give it a name like My Places.
    If you want to create a hierarchy of say continents, Click on the + again and select New Sub-Category. Give it a name of a continent and make sure that the parent is set to My Places.
    You can create the tree structure as you want.
    Finally, click on the + and select New Keyword Tag. Give it the name of the place that you want and check that the category is set to its parent in the chain.
    You could end up with this type of thing
    My Places
         Sub Cat 1
              Place 1
         Sub Cat 2
              sub Cat 2-1
                  Place 2
              sub Cat 2-2
                   Place 3
    I hope that makes sense - good luck
    Brian

  • Safari unable to download the file.. not enough free disk space?

    Very odd! After filling out Apple's Online Rebate Submission Completion Form, I was asked to print it out by clicking on the supplied link, but instead, I got this prompt:
    Safari could not download the file because there is not enough free disk space!
    Of course, this is totally ludicrous because I just bought this computer and it has a 500 Gb hard drive!
    Any idea what's going on?
    Message was edited by: WildBill

    Tried using Firefox instead of Safari. The prompt I got in this instance ultimately had to do with changing the permissions on my download folder? Odd.
    When I tried to add myself (as the administrator) to the list, the info window crashed. When I clicked on "everyone" and changed permissions to read and write (instead of just read), I was able to download the form as a pdf.

  • Is it possible to adjust the photo angle and size in Snapshots theme

    Hi
    I'm new to aperture and am having a few frustrated-hair-pulling issues with the Snapshots theme. I was using iPhoto to create a Photobook of my son's first year and found it to be too limited for what I want to create. I came across Aperture and was wow'ed by the description saying I could rotate and resize photos, add text boxes etc. This was just what I was after so I downloaded the free trial to test it. I like the snapshots theme the best for the idea of it looking more "homemade" but seem to be unable to adjust the photo angle and size from the given templates. Also I find that the border in adding new photos (which I can adjust the size and rotation of) is without the custom shadow effect that the template ones have. Duplicating the template photo only gives one with the shadow effect but also of the same size with the same rotation that I can't do anything with! Rrrrghhhh
    I thought this would be a great way to customize the album I'm making for my little boy, and that it wouldn't be too hard! My mac skills are considerable, but I'm by no means an expert! Is this program too much for a non-pro-creative-housewife with a wish that may be solveable in iPhoto afterall?
    Or am I just missing something? Is there a way to do this or shall I just give up and choose another theme?
    Any recommendations are welcome! Please!!! My scalp is now officially sore!

    Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
    http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
    A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

  • How do i adjust the resolution in irefox. my computer resolution is normal, but firefox is huge?

    i need to know how to adjust the browser resolution.

    Not sure.  Check the manual.
    iPhone User Guide (For iOS 5.0 Software)

  • The volume will only go to the highest level and I am unable to lower the volume even when sliding the bar

    I am unable to adjust the volume level.  The slider bar goes to the maximum volume even after I try to adjust it lower.

    Try the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults/new iPod.

  • Any way to avoid adjusting the ring volume?

    Any way to avoid adjusting the ring volume? Don't know how but after using the phone for a day or two, the ring volume is adjusted. Is it because I adjust the volume of iPod or other apps. Is there a way to fix the ring volume at a constant level and won't be changed until actually changing the ring volume setting itself?
    Anyone?
    Thanks
    Gaston

    The ring volume is seperate from the iPod or 3rd party apps volume. You can have these at seperate levels. As a test, I made sure the ringer volume is at 100%. I started playing a song and lowered the iPod volume to 50%. I stopped the song and checked the ringer volume which remained at 100%.
    There is no lock setting for this. If you adjust the volume when not using the iPod or when not playing a 3rd party app, it will adjust the ringer volume.

  • PSE11 Can't adjust the line spacing correctly - can anyone help ?

    When I write text in a free style I'm unable to adjust the line spacing anymore - it turns out much to big and whatever value I choose it's every time the same !?!
    When trying text in a box it's all OK, but I seldom use text in a box...
    I'm using PSE since 11/2012 and the problem occured just now
    Has anyone an idea ?

    Click the leading dropdown below and choose "Auto". If this doesn't work click at the flyout button at the top-right corner of tool option bar and choose "Reset Tool".

  • How to find the right OSS Note for my SAP version

    Hi All,
    There have been issues with the Vendor/Material Master records whenever we run a LSMW by recording process. It is such that all those fields that we have not updated come up with a value as *DELETED* for which i think we should implement a OSS Note to our system.
    I am unable to find the right OSS Note Number for this to our SAP system :
    SAP_APPL                          Support Pack: SAPKH50009    Components:Logistics & Accounting.
    Request you all to provide me with the correct OSS Note Number so that we can get this issue corrected as this has become very critical.

    Hi,
    As Jurgen wrote - it could be some programming problem.
    But, generally, if you find a SAP Note, that, in your opinion, can solve your SAP problem and it is not intended for your SAP version - simply write to SAP OSS.
    If this note really solves your problem, they will extend the validity of this note for your SAP version.
    Otherwise, if it is SAP problem, OSS will try to provide solution for it.
    I usually act like this - it works.
    Hope it helps, not this time, maybe in the future.
    Regards,
    Wojciech

  • I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • HT5252 I tried to change my metadata date and got this   Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

    I tried to change the metadata date.  It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
    Unable to change original file.  Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
    Wassup?

    What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
    If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
    Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
    If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
    Regards
    Léonie

Maybe you are looking for