Unable to alter /tmp directory during Weblogic 10.3.3 install

I am installing on a 64 bit Linux server and each time I run the following command I get the message 'No space left on device'. Doing a df -k on Unix gives me /tmp at 100% full. I tried to change the path for the /tmp but it has not worked.
Any ideas please?
java -d64 -jar wls1033_generic.jar -Djava.io.tmpdir=/proj/db01/software/tmp -log=/proj/db01/software/install_wls_4.log

1/
df -hFilesystem Size Used Avail Use% Mounted on
/dev/mapper/system-root 1008M 246M 712M 26%
/udev 6.1G 8.8M 6.0G 1% /dev
/dev/mapper/system-app 248M 11M 226M 5% /app
/dev/mapper/system-appctm 1008M 230M 728M 24% /app/ctm
/dev/mapper/system-apptivoli 3.0G 259M 2.6G 9% /app/tivoli
/dev/xvda1 130M 18M 105M 15% /boot
/dev/mapper/system-home 496M 24M 447M 6% /home
/dev/mapper/system-opt 1008M 455M 503M 48% /opt
/dev/mapper/system-proj 248M 11M 226M 5% /proj
/dev/mapper/system-tmp 1008M 771M 187M 81% /tmp
/dev/mapper/system-usr 4.0G 2.0G 1.8G 54% /usr
/dev/mapper/system-usrlocalTivoli 496M 30M 441M 7% /usr/local/Tivoli
/dev/mapper/system-var 2.0G 512M 1.4G 27% /var
/dev/mapper/system-varoptperf 496M 131M 341M 28% /var/opt/perf
/dev/mapper/datavg-apporacle 7.9G 6.5G 1021M 87% /app/oracle
/dev/mapper/datavg-projoracle 2.0G 120M 1.8G 7% /proj/oracle
/dev/mapper/datavg-projoraclearchive 5.0G 3.5G 1.3G 75% /proj/oracle/archive
/dev/mapper/datavg-projstep 20G 14G 5.0G 74% /proj/step
/dev/mapper/datavg-projstepdbredo01 6.0G 2.6G 3.1G 47% /proj/step/dbredo01
/dev/mapper/datavg-projstepdb01 125G 60G 59G 51% /proj/step/db01
cpnfs01:/proj/cpnfs01/software 700G 637G 64G 91% /proj/software
2/ Get permission denied errors
du: `./lost+found': Permission denied
du: `./app/lost+found': Permission denied
du: `./app/ctm/lost+found': Permission denied
du: `./app/ctm/ctmag63/Documents': Permission denied
3/ I am using a 'Generic Package installer—This type of installer is a .jar file.' Using this as Java is already installed on the server using JDK 1.6. Am trying to install it using a xterm Unix session in graphical mode. This jar file seems to be the only option for a 64 bit Linux.
Thanks,
Pauline.

Similar Messages

10.1.3.5 - Unable to delete tmp files during bpel redeployment

when I try to re deploy bpel process, i am getting the following error
An error occurred while attempting to deploy the BPEL suitcase file "C:\product\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\bpel_2455783.tmp"; the exception reported is: archive cannot rename C:\product\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\.bpel_WorkOrderIn_bpel_1.0_674431f9e04e68ddac78adf0281872dd.tmp
it looks the directory is in use and the only way i can delete it is stopping the server and deleting it.
Anyway to fix this ?

same problem is discussed here :
http://blog.thisisahmed.com/2009/10/bug-in-soa-suite-10g-10135-patchset-for.html
http://www.ibiztrack.com/forums/bpel/msg/14.html
http://kr.forums.oracle.com/forums/thread.jspa?threadID=957142
guess you're not the only one, and for as far as i can see it's a bug without a fix yet.

Error unable to create jar cache in /tmp directory!

I using tomcat4.0.2,but when I start the tomcat from %catalina_home%/bin using startup.bat, in the startup console printing "error unable to create jar cache in /tmp directory: java.io.IOException: System cant find the direct", and tomcat can be started, no problem when I access my web application.
Why it happened?
But if I start tomcat from startup menu of the system instead of using startup.bat, no error is thrown.

anyone know it? Please tell me.
I was puzzled about it.
TIA

Change tmp directory used during deploying BPEL

Hi,
We need to be able to deploy BPEL processes using ANT but use a different temporary directory from the default being /tmp on Linux. We are using BPEL 10.1.3.4 on OAS. This is because we have different oracle accounts and homes on the same host.
I don't see a way to change in the build.xml file the <bpelc task to specify a temp directory.
I see in the bpelc commonad line there is the -b option but not in the build.xml
We get the error:
org.apache.commons.fileupload.FileUploadException: Processing of multipart/form-data request failed. /tmp/upload_00000002.tmp (Permission denied)
This is becuase the other oracle account own this file with Read only for everyone else.
I changed the permission to Write for all for the upload files and was able to deploy but these files are removed on reboots and so the deployment will get the same issue again. Also the number of upload files will grow.
Please let me know if you know a solution to specify in a specific tmp directory.
Thanks

The metalink note solved the issue. Had to do BOTH outllined changes.
Thanks

I am unable to start Managed Servers through Weblogic AdminConsole

Hi,
We are using Weblogic 10.3.1.0 version.
Totaly 4 Managed Severs
1 Admin Server
with Nodemanger.
In Admin Console When ever we going to Stop the Manged Servers.
1. Environment ----- > Servers ---- > Control ----------- > Mananged Server 1 -----------> Force shutdown
2. Then click refresh button ---- showing "FAILED_NOT_RESTARTABLE"
3. after that when ever we going to start the Managed Server in Admin console
First its Showing ----- Starting
and next its showing ----- FAILED_NOT_RESTARTABLE
4. its not coming to Running State.
In Logs
Domain log
-----------> <1273141345460> <BEA-000450> <Socket 8 internal data record unavailable (probable closure due idle timeout), event received 17>
####<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280738> <BEA-000396> <Server shutdown has been requested by weblogic>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280771> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <Cluster> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280844> <BEA-000163> <Stopping "async" replication service>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281061> <BEA-000365> <Server state changed to ADMIN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281064> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <Server> <ukirt156> <twpserver1> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1273143281113> <BEA-002607> <Channel "Default" listening on 172.21.149.168:7003 was shutdown.>
####<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <ukirt156> <AdminServer> <[ACTIVE] ExecuteThread: '45' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1273143390016> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
AdminServer log
<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 11:57:33 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 12:07:02 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
ManagedServer Log
<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutting down.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler pause
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED paused.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutdown complete.
<06-May-2010 11:54:54> <Debug> <NodeManager> <Waiting for the process to die: 19316>
<06-May-2010 11:54:54> <Info> <NodeManager> <Server was shut down normally>
<06-May-2010 11:54:54> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
NodeManager Log
<06-May-2010 11:54:54> <Info> <twp_domain> <twpserver1> <Server was shut down normally>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Boot identity properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Startup configuration properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/startup.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00020">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Starting WebLogic server with command line: /appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/bin/java -Dweblogic.Name=twpserver1 -Djava.security.policy=/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.management.server=http://ukirt156:7001 -Djava.library.path="/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386/jrockit:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/../lib/i386::/appl/nsm/CA/UnicenterNSM/lib:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386/client:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386:/appl/nsm/CA/SharedComponents/ccs/dia/dna/lib:/appl/nsm/CA/SharedComponents/ccs/dia/lib:/usr/lib:/opt/CA/CAlib:/appl/nsm/CA/SharedComponents/lib:/appl/nsm/CA/SharedComponents/Csam/SockAdapter/lib:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/data/share/package/twp/WEB-INF/lib/ojdbc14.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.system.BootIdentityFile=/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xmanagement:port=7091,ssl=false,authenticate=false -Xms=1200m -Xmx=1200m -Xverbose:gc,gcpause -Dreflexis.scheduler=true -Dreflexis.server=twpserver1 -Djava.awt.headless=true -Dclient.encoding.override=UTF-8 -Doracle.jdbc.V8Compatible=true weblogic.Server >
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Working directory is "/appl/weblogic/scripts">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00021">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
<06-May-2010 11:56:29> <Info> <twp_domain> <twpserver1> <Server failed during startup so will not be restarted>
<06-May-2010 11:56:29> <Warning> <Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:332)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception <06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST script its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
nmStart('twpserver1')
Please provide the solution, how to solve this issue.
Thanks
SRK

Just at first glance, it seems as though you have one or more configuration issues, perhaps inconsistencies between the node manager server configuration files and the domain's config.xml
nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
nmStart('twpserver1')
implies that tmp_domain is configured in /appl/weblogic/oracle/middleware/user_projects/domains, (which is the default from the configuration wizard). However, the node manager and server output logs make it seem like it's trying to use a domain in the directory /appl/weblogic/scripts. Not sure how that happened, perhaps you had two domains? Perhaps copied or moved the domain files? Something else?
In any case, start by checking out your nodemanager.domains file and ensure that it reflects your intended domain directory.

Unable to alter the process. Unable to execute action start and stop

Hi,
I have setup a UCM CMS server on Linux. In the UCM instaance I setup If I go to Admin Server, the Genral configuration page contains no entry. While the file Config.cfg present in the directory Oracle/UCM/Server/Config/ contains all the entries I provided during the setup.
Now when I am trying to start/stop the UCM instance, it is giving me error " Request Failed : Unable to alter the process. Unable to execute action 'stop' on server 'EBIZ_UCM'." While If I try to restart the server using IdcServer present at the location Oracle/UCM/Server/bin/, it is getting started.
While clicking on the Component Manager, its giving error like :
" Unable to retrieve component data. Components.hda exists, but contains no data. ".
Please suggest.

I know this is an old thread, but I ran across this while having a similar problem. It turned out that I had started the admin server incorrectly (e.g. running /apps/oracle/ucm/server/admin/bin/IdcAdmin instead of /apps/oracle/ucm/server/admin/etc/idcadmin_start). Once I corrected that the problem went away.

Unable to set working directory (-2147024832) for some app installs

I've found several drivers on a Dell Laptop that don't play well with others in MDT 2012, so I started making an application install package for them instead. Most of them fail with an "unable to set working directory" error. I checked
the app install logs and they don't really make any sense to me. I know the process as a whole works, because I can install .Net 4.0 runtimes without any problems using the same method. The important bits of the ZTI App log are below. Would
be for any guidance on this, as I'm stumped and none of the searches on the exact errors are of much help.
A sample error returned in the wizard is:
WARNING - unable to set working directory (-2147024832)Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
The ZTIApplication.log file contains the following... the first is one that works (.NET 4), the second is one that fails. (Not using code block for this one, it doesn't like it).
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Command has been started (process ID 3212)]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Return code from command = 0]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41033 sent: Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Property InstalledApplications001 is now = {9abb5842-9a8e-45c5-9268-4fa4e69dba34}]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 needs a reboot, initiating.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Dependent application requested a reboot]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRebootRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRetryRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Exiting to initiate a reboot with retry (to pick up where we left off)]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41001 sent: ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Entry: {dee65f94-e269-4eac-927d-6e06c0e0eb9d}]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Name: Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[WARNING - unable to set working directory: (-2147024832)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="2" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41031&severity=1&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=ZTI
installing application &dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="3" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41032&severity=3&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=Error
installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
&dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41032 sent: Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.]
<![LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
Why can't it find it or set the working directory, especially when it's already validated that it's there?
--smthng

I'm not familiar with how Dell does their client side software, but for the server-side software (my area of expertise), I've always done something like the following:
I recommend running every application install in a VBScript/Powershell wrapper. You get logging for the application back on your SLShare as well as its cleaner (you can replace Drivers A05 with A06 by changing the script, rather than editing the application
in MDT).
sApplicationName = "Dell 12G Chipset"
oLogging.CreateEntry "Install-" & sApplicationName & ": Starting " & sApplicationName & " installation", LogTypeInfo
'//Set Destination Folder
sDestFolder = "c:\temp\"
'//Set Source Install Directory
sSourceDir = oUtility.ScriptDir
sSourceDir = sSourceDir & "\Source"
'//Check that folder exists, if not, create it.
oLogging.CreateEntry "Install-" & sApplicationName & ": Check that " & sDestFolder & " exists.", LogTypeInfo
if not oFSO.FolderExists (sDestFolder) then
oFSO.CreateFolder sDestFolder
End If
'//Copy folder from MDT share to C:\Temp
oLogging.CreateEntry "Install-" & sApplicationName & ": Copy from " & sSourceDir & " to " & sDestFolder, LogTypeInfo
oFSO.CopyFolder sSourceDir, sDestFolder
'//Sleep for 2 seconds to allow copy to finish
wscript.sleep 2000
sFile = sDestFolder & "Source\setup.exe"
'// Check if file/folder exists
If not oFSO.FileExists(sFile) then
oLogging.CreateEntry "Install-" & sApplicationName & ": " & sFile & " was not found, unable to install " & sApplicationName & "", LogTypeError
ZTIProcess = Failure
Exit Function
End if
'// Create log entry to show file being run
oLogging.CreateEntry "" & sFile & " -s", LogTypeInfo
iRetVal = oUtility.RunWithHeartbeat("" & sFile & " -s")
if (iRetVal = 0) or (iRetVal = 3010) then
ZTIProcess = Success
Else
ZTIProcess = Failure
End If
wscript.sleep 15000
'// Disable Zone Checks
oEnv("SEE_MASK_NOZONECHECKS") = 1
'//Folder Cleanup
oFSO.DeleteFolder sDestFolder & "Source"
I always copy any drivers that are installed after the fact (everything for me other than SAS/NIC drivers) to the C:\Temp as it can break. I always update my NIC drivers during the build to the latest Dell software using their packs. I try to
not mess with my boot image unless I'm adding a new model that is not supported by the built-in drivers.

Tmp Folder in Weblogic 10.3

Can anyone tell me what is the purpose of tmp folder inside the domain directory for Weblogic 10.3
* domain_name/tmp ?
what is its purpose?

instead of import weblogic.security.SubjectUtils; use import weblogic.security.spi.WLSUser; and get the username as below
Set users = subject.getPrincipals(WLSUser.class);
          Iterator iter = users.iterator();
          while (iter.hasNext()){
               userName = ((WLSUser)iter.next()).getName();
               System.out.println(userName);
this returns you the username

There is error 'No such file or directory' during loading custom authentica

Hi,
I am working on OBIEE authentication using Hyperion shared services. I did the necessary changes in config file, like modifying config.xml to enable HSSauthenticator and enabling external authentication to instanceconfig.xml. However BI Server is unable to load the driver file for the Hyperion custom authenticator. Here is the error message.
There is error 'No such file or directory' during loading custom authentication module '/opt/local/usr/home/Oracle/OracleBI/web/bin64/libsawobisauthenticatorproxy643r.so'.
2011-06-26 21:04:05
[nQSError: 13011] Query for Initialization Block 'Hyperion EPM' has failed.
I have set the env variable LD_LIBRARY_PATH to this path but still I am getting the same error msg. I also have full previleges on this file. Would be really great if anyone can tell me why I am unable to load this driver file on to server. Thanks in advance

I think I figured out. Instead of giving path thru bin64 , I gave it thru bin folder, which is a 32bit file. I think they installled a 32bit OBIEE.

"Unable to unprepare application" error in weblogic 10

Hi,
I'm trying to deploy an application in weblogic 10.3.2 and am getting the following error:
####<Jun 16, 2011 10:20:17 PM GMT-00:00> <Error> <Deployer> <drh00068.com> <Server1> <Thread-1> <<WLS Kernel>> <> <> <1308262817084> <BEA-1
49250> <Unable to unprepare application 'CIAPPE-4'.
weblogic.management.DeploymentException:
at weblogic.application.internal.BaseDeployment.throwAppException(BaseDeployment.java:157)
at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:499)
at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:206)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic.deploy.internal.targetserver.BasicDeployment.unprepare(BasicDeployment.java:287)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doUnprepare(DeploymentAdapter.java:82)
at weblogic.management.deploy.internal.DeploymentAdapter.unprepare(DeploymentAdapter.java:220)
at weblogic.management.deploy.internal.AppTransition$7.transitionApp(AppTransition.java:76)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.unprepare(ConfiguredDeployments.java:205)
at weblogic.management.deploy.internal.ConfiguredDeployments.undeploy(ConfiguredDeployments.java:193)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownApps(DeploymentServerService.java:188)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownHelper(DeploymentServerService.java:120)
at weblogic.application.ApplicationShutdownService.halt(ApplicationShutdownService.java:143)
at weblogic.t3.srvr.ServerServicesManager.haltInternal(ServerServicesManager.java:504)
at weblogic.t3.srvr.ServerServicesManager.halt(ServerServicesManager.java:336)
at weblogic.t3.srvr.T3Srvr.shutdown(T3Srvr.java:986)
at weblogic.t3.srvr.T3Srvr.forceShutdown(T3Srvr.java:893)
at weblogic.t3.srvr.T3Srvr$2.run(T3Srvr.java:905)
Caused By: weblogic.utils.ErrorCollectionException:
There are 2 nested errors:
java.lang.IllegalStateException: WLDF Module not in PREPARED state during unprepare() callback. State was 3
at weblogic.diagnostics.module.WLDFModule.unprepare(WLDFModule.java:378)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.previous(DeploymentCallbackFlow.java:397)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:329)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:311)
at weblogic.application.internal.flow.DeploymentCallbackFlow.unprepare(DeploymentCallbackFlow.java:111)
at weblogic.application.internal.flow.DeploymentCallbackFlow.unprepare(DeploymentCallbackFlow.java:103)
at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1235)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:329)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:311)
at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:206)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic.deploy.internal.targetserver.BasicDeployment.unprepare(BasicDeployment.java:287)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doUnprepare(DeploymentAdapter.java:82)
at weblogic.management.deploy.internal.DeploymentAdapter.unprepare(DeploymentAdapter.java:220)
at weblogic.management.deploy.internal.AppTransition$7.transitionApp(AppTransition.java:76)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.unprepare(ConfiguredDeployments.java:205)
at weblogic.management.deploy.internal.ConfiguredDeployments.undeploy(ConfiguredDeployments.java:193)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownApps(DeploymentServerService.java:188)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownHelper(DeploymentServerService.java:120)
at weblogic.application.ApplicationShutdownService.halt(ApplicationShutdownService.java:143)
at weblogic.t3.srvr.ServerServicesManager.haltInternal(ServerServicesManager.java:504)
at weblogic.t3.srvr.ServerServicesManager.halt(ServerServicesManager.java:336)
at weblogic.t3.srvr.T3Srvr.shutdown(T3Srvr.java:986)
at weblogic.t3.srvr.T3Srvr.forceShutdown(T3Srvr.java:893)
at weblogic.t3.srvr.T3Srvr$2.run(T3Srvr.java:905)
and
java.lang.IllegalStateException: WLDF Module not in INITIALIZED state during destroy() callback. State was 3
at weblogic.diagnostics.module.WLDFModule.destroy(WLDFModule.java:406)
at weblogic.application.internal.flow.InitModulesFlow.destroy(InitModulesFlow.java:372)
at weblogic.application.internal.flow.InitModulesFlow.unprepare(InitModulesFlow.java:339)
at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1235)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:329)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:311)
at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:206)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic.deploy.internal.targetserver.BasicDeployment.unprepare(BasicDeployment.java:287)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doUnprepare(DeploymentAdapter.java:82)
at weblogic.management.deploy.internal.DeploymentAdapter.unprepare(DeploymentAdapter.java:220)
at weblogic.management.deploy.internal.AppTransition$7.transitionApp(AppTransition.java:76)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.unprepare(ConfiguredDeployments.java:205)
at weblogic.management.deploy.internal.ConfiguredDeployments.undeploy(ConfiguredDeployments.java:193)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownApps(DeploymentServerService.java:188)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownHelper(DeploymentServerService.java:120)
at weblogic.application.ApplicationShutdownService.halt(ApplicationShutdownService.java:143)
at weblogic.t3.srvr.ServerServicesManager.haltInternal(ServerServicesManager.java:504)
at weblogic.t3.srvr.ServerServicesManager.halt(ServerServicesManager.java:336)
at weblogic.t3.srvr.T3Srvr.shutdown(T3Srvr.java:986)
at weblogic.t3.srvr.T3Srvr.forceShutdown(T3Srvr.java:893)
at weblogic.t3.srvr.T3Srvr$2.run(T3Srvr.java:905)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:337)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:309)
at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic.deploy.internal.targetserver.BasicDeployment.unprepare(BasicDeployment.java:287)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doUnprepare(DeploymentAdapter.java:81)
at weblogic.management.deploy.internal.DeploymentAdapter.unprepare(DeploymentAdapter.java:220)
at weblogic.management.deploy.internal.AppTransition$7.transitionApp(AppTransition.java:75)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.unprepare(ConfiguredDeployments.java:204)
at weblogic.management.deploy.internal.ConfiguredDeployments.undeploy(ConfiguredDeployments.java:192)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownApps(DeploymentServerService.java:188)
at weblogic.management.deploy.internal.DeploymentServerService.shutdownHelper(DeploymentServerService.java:120)
at weblogic.application.ApplicationShutdownService.halt(ApplicationShutdownService.java:142)
at weblogic.t3.srvr.ServerServicesManager.haltInternal(ServerServicesManager.java:504)
at weblogic.t3.srvr.ServerServicesManager.halt(ServerServicesManager.java:336)
at weblogic.t3.srvr.T3Srvr.shutdown(T3Srvr.java:986)
at weblogic.t3.srvr.T3Srvr.forceShutdown(T3Srvr.java:892)
at weblogic.t3.srvr.T3Srvr$2.run(T3Srvr.java:905)
Guys...Please help me out...Thanks!
Edited by: user13726690 on Jun 16, 2011 3:53 PM

It appears like something called a shutdown operation. From the last stack:
at weblogic.t3.srvr.T3Srvr.forceShutdown(T3Srvr.java:892)
Was the server in the middle of a shutdown during the deploy?

Unable to open Integration directory

Hi,
I am trying to open Integration directory but getting an error. Its saying
"Unable to launch Integration Directory".
Can someone help?

Hi,
I am including a list of possible solutions. There could be many reasons to this problem so i am giving you all possible solutions.
I think you need to clera your JWS cache. to do this, just open your Java Web Start, go to FILE-->PREFERENCES >Advanced> and select the option CLEAR APPLICATION FOLDER.
or
I tried sldcheck transaction and found out that sld is not working .
When I go through system log user was locked which is used for sldaccess maintained in sldapicust transaction.
After unlocking same user , problem was resolved.
or
suggest you try installing j2sdk-1_4_2_09.
or
Go thru this blog Unable to open Integration Builderchecklist
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
or
Java Web Start
/people/sameer.shadab/blog/2005/11/27/java-web-start
Regards
joel

[SOLVED] Files in the /tmp directory are being deleted

Hi,
I've been using Arch Linux for four weeks, but have now come across a problem which I can't fix after trying to search for a solution (and also checking to see if anyone also had the same problem). I would appreciate any help you can give.
A few days ago the web browsers I use (chromium and opera) lost their profile settings, and I had to set the profiles. This kept happening and the indicator of the problem was that I use profile-sync-daemon for both web browsers, which uses the /tmp directory. I then started noticing that a file I created in /tmp disappeared which pointed me to the fact that something was cleaning up the /tmp directory (this seems to happen hourly).
A quick search led me to systemd-tmpfiles and the /usr/lib/tmpfiles.d/tmp.conf file. I have not modified the file, and if I have read it correctly only files in the /tmp directory that are more than 10 days old are deleted. I boot every day, so no files should be deleted by systemd-tmpfiles (unless I've misunderstood tmpfiles.d).
Here is the tmp.conf file anyway:
$ cat /usr/lib/tmpfiles.d/tmp.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See tmpfiles.d(5) for details
# Clear tmp directories separately, to make them easier to override
d /tmp 1777 root root 10d
d /var/tmp 1777 root root 30d
# Exclude namespace mountpoints created with PrivateTmp=yes
x /tmp/systemd-private-*
x /var/tmp/systemd-private-*
X /tmp/systemd-private-*/tmp
X /var/tmp/systemd-private-*/tmp
The /etc/tmpfiles.d directory is empty, so /usr/lib/tmpfiles.d is the only location for the tmpfiles.d config files:
$ ls /etc/tmpfiles.d/
$
Here is the list of packages I upgraded/installed for the last few days. systemd 207-3 seems the likeliest candidate, but I have not come across any reports about the problem I am having.
[2013-09-17 19:30] [PACMAN] Running 'pacman -Syu'
[2013-09-17 19:30] [PACMAN] synchronizing package lists
[2013-09-17 19:30] [PACMAN] starting full system upgrade
[2013-09-17 19:34] [PACMAN] upgraded bluez-utils (5.7-1 -> 5.8-1)
[2013-09-17 19:34] [PACMAN] upgraded cogl (1.14.0-4 -> 1.14.0-5)
[2013-09-17 19:34] [PACMAN] upgraded dbus (1.6.12-1 -> 1.6.14-1)
[2013-09-17 19:34] [PACMAN] upgraded dialog (1.2_20130523-2 -> 1.2_20130902-1)
[2013-09-17 19:34] [PACMAN] installed efivar (0.6-1)
[2013-09-17 19:34] [PACMAN] upgraded efibootmgr (0.6.0-3 -> 0.6.0.138.1132342-1)
[2013-09-17 19:34] [ALPM-SCRIPTLET] Generating locales...
[2013-09-17 19:34] [ALPM-SCRIPTLET] en_GB.UTF-8... done
[2013-09-17 19:34] [ALPM-SCRIPTLET] Generation complete.
[2013-09-17 19:35] [PACMAN] upgraded glibc (2.18-3 -> 2.18-4)
[2013-09-17 19:35] [PACMAN] upgraded gnome-desktop (1:3.8.3-2 -> 1:3.8.4-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-color-manager (3.8.2-1 -> 3.8.3-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-settings-daemon (3.8.4-2 -> 3.8.5-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-control-center (3.8.4.1-2 -> 3.8.5-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-themes-standard (3.8.3-1 -> 3.8.4-1)
[2013-09-17 19:35] [PACMAN] upgraded libpng (1.6.3-1 -> 1.6.5-1)
[2013-09-17 19:35] [PACMAN] upgraded libusbx (1.0.16-2 -> 1.0.17-1)
[2013-09-17 19:35] [PACMAN] upgraded linux-firmware (20130725-1 -> 20130903-1)
[2013-09-17 19:35] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-17 19:35] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Starting build: 3.11.1-1-ARCH
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Starting build: 3.11.1-1-ARCH
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-17 19:35] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-17 19:35] [PACMAN] upgraded linux (3.10.10-1 -> 3.11.1-1)
[2013-09-17 19:35] [PACMAN] upgraded openssh (6.2p2-1 -> 6.3p1-1)
[2013-09-17 19:35] [PACMAN] upgraded orc (0.4.17-1 -> 0.4.18-1)
[2013-09-17 19:35] [ALPM-SCRIPTLET]
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> The file /etc/sysctl.conf has been removed from this
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> package, as all its settings are now kernel defaults.
[2013-09-17 19:35] [ALPM-SCRIPTLET]
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> If you had customized it, you need to rename it as
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> /etc/sysctl.d/99-sysctl.conf since from version 207 on
[2013-09-17 19:35] [ALPM-SCRIPTLET] ==> systemd only applies settings from /etc/sysctl.d/* .
[2013-09-17 19:35] [ALPM-SCRIPTLET]
[2013-09-17 19:35] [PACMAN] upgraded procps-ng (3.3.8-2 -> 3.3.8-3)
[2013-09-17 19:35] [PACMAN] upgraded raptor (2.0.9-2 -> 2.0.10-2)
[2013-09-17 19:35] [PACMAN] upgraded xorg-xinput (1.6.0-1 -> 1.6.1-1)
[2013-09-17 19:36] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-dsana/PKGDEST.u70/profile-sync-daemon-5.40.1-1-any.pkg.tar.xz'
[2013-09-17 19:36] [PACMAN] upgraded profile-sync-daemon (5.40-1 -> 5.40.1-1)
[2013-09-18 20:35] [PACMAN] Running 'pacman -Syu'
[2013-09-18 20:35] [PACMAN] synchronizing package lists
[2013-09-18 20:35] [PACMAN] starting full system upgrade
[2013-09-18 20:35] [ALPM] warning: /etc/systemd/journald.conf installed as /etc/systemd/journald.conf.pacnew
[2013-09-18 20:35] [ALPM-SCRIPTLET] ==> systemd 205 restructures the cgroup hierarchy and changes internal
[2013-09-18 20:35] [ALPM-SCRIPTLET] protocols. You should reboot at your earliest convenience.
[2013-09-18 20:35] [ALPM-SCRIPTLET] ==> The "timestamp" hook for mkinitcpio no longer exists. If you used
[2013-09-18 20:35] [ALPM-SCRIPTLET] this hook, you must remove it from /etc/mkinitcpio.conf. A "systemd"
[2013-09-18 20:35] [ALPM-SCRIPTLET] hook has been added which provides this functionality, and more.
[2013-09-18 20:35] [PACMAN] upgraded systemd (204-3 -> 207-3)
[2013-09-18 20:35] [PACMAN] upgraded systemd-sysvcompat (204-3 -> 207-3)
[2013-09-18 20:35] [PACMAN] upgraded udisks2 (2.1.0-3 -> 2.1.1-1)
[2013-09-19 20:46] [PACMAN] starting full system upgrade
[2013-09-19 20:48] [PACMAN] Running 'pacman -Rns psd'
[2013-09-19 20:48] [PACMAN] Running 'pacman -Rns profile-sync-daemon'
[2013-09-19 20:48] [PACMAN] removed profile-sync-daemon (5.40.1-1)
[2013-09-19 20:48] [PACMAN] removed rsync (3.0.9-6)
[2013-09-19 20:49] [PACMAN] Running 'pacman -Rns chromium'
[2013-09-19 20:49] [PACMAN] Running 'pacman -Syu'
[2013-09-19 20:49] [PACMAN] synchronizing package lists
[2013-09-19 20:49] [PACMAN] starting full system upgrade
[2013-09-19 20:50] [PACMAN] upgraded chromium (29.0.1547.65-1 -> 29.0.1547.76-1)
[2013-09-19 20:50] [PACMAN] upgraded xvidcore (1.3.2-1 -> 1.3.2-2)
[2013-09-19 20:58] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-dsana/PKGDEST.ZDK/chromium-pepper-flash-stable-2:11.8.800.170-1-x86_64.pkg.tar.xz'
[2013-09-19 20:58] [PACMAN] upgraded chromium-pepper-flash-stable (2:11.8.800.97-1 -> 2:11.8.800.170-1)
EDIT: journalctl doesn't show me anything interesting, other than the fact that chromium complains when it realizes that its profile data has gone missing.
Last edited by dsana123 (2013-09-21 16:02:48)

I think I have found the problem.
There was a gnome update earlier in the week. gnome-settings-daemon runs an hourly housekeeping job. I had set the "Automatically Purge Temporary Files" in the Privacy tab when setting up my laptop last month.
gnome-settings-daemon has decided to delete files in the /tmp directory (I can trigger this by clicking "Purge Temporary files" which then deletes my files in the /tmp directory). This does not happen in the previous gnome-settings-daemon. Anyway, I'll mark the thread SOLVED if my file in the /tmp directory survives the hour!
[2013-09-17 19:35] [PACMAN] upgraded gnome-desktop (1:3.8.3-2 -> 1:3.8.4-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-color-manager (3.8.2-1 -> 3.8.3-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-settings-daemon (3.8.4-2 -> 3.8.5-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-control-center (3.8.4.1-2 -> 3.8.5-1)
[2013-09-17 19:35] [PACMAN] upgraded gnome-themes-standard (3.8.3-1 -> 3.8.4-1)

Unable to select Quantitative data during creation of MIC while using Clas

*Unable to select Quantitative data during creation of MIC while using Class characterstics*
Dear All,
I want to transfer MIC Result recording to Batch class.
For that, i am trying to create MIC & giving class characteristic name in QS21, and then under control data, I am unable to select, Quantitative. By default system is selecting Qualitative. But I want to create that MIC as Quantitative.
Is there any setting for this?
Please help...
Thanks in advance
Edited by: Sitarami Reddy Kummeta on Nov 30, 2009 6:44 PM

Hi
to have master inspection characteristic quantitative ,the class characteristic must be of format "NUM":
Regards
Sujit

Creation of Virtual Directory in weblogic.xml (OBIEE11 Weblogic)

We are using OBIEE 11.1.1.6.4, we want to create a Virtual directory mapping in weblogic server so that we can place our static image files to access from the application URL.
To do this activity, we have performed following steps -
1) Navigated to C:\OBIEE11G\Oracle_BI1\bifoundation\jee
2) Open analytics.ear file
3) Existing code in weblogic.xml is: (if weblogic.xml is not present we need to create the file with below code)
<?xml version = '1.0' encoding = 'US-ASCII'?>
<weblogic-web-app xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app">
<session-descriptor>
<cookie-path>/analytics</cookie-path>
</session-descriptor>
</weblogic-web-app>
4) We have added virtual-directory-mapping tag; After adding virtual directory mapping tag, the code in weblogic.xml is
<?xml version = '1.0' encoding = 'US-ASCII'?>
<weblogic-web-app xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app">
<session-descriptor>
<cookie-path>/analytics</cookie-path>
</session-descriptor>
<virtual-directory-mapping>
<local-path>D:/virtualdirectory</local-path>
<url-pattern>/images/*</url-pattern>
<url-pattern>*.jpeg</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
5) We have created a folder virtualdirectory under D: drive. And then created a folder images within folder virtualdirectory.
6) Then we have placed an image (lets say) test.jpeg within image folder.
7) Restarted all BI services,
8) Now when we try to access URL http://localhost:9704/analytics/images/test.gif. Now we are able to see the image, it’s working perfectly fine.
If we paste the above URL in browser it will automatically displays the image without any authentication. So our requirement is, on pasting the URL in browser first it should redirect to OBIEE homepage and when authentication is done then it should display the image.
Request you to please advise with your inputs.

Why did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS

When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How can I solve this problem?

When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.

Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith.

Unable to alter /tmp directory during Weblogic 10.3.3 install

Similar Messages

Maybe you are looking for