Unable to assemble the RAM memory module into the slot
Can someone tell me how to assemble the RAM module into the slot? I have followed the instructions provided by Mac but I cannot fit it into the slot. I do not know if the module is faulty or I do not apply enough force to get it in (afraid of damage it).
As long as you are certain that the notch in the module lines up with the matching piece in the slot, put equal pressure on both ends as you push. It takes about 20 pounds of pressure to get it to snap in. Just make sure you don't push on one end and not the other and be careful to push straight in.
Similar Messages
-
By mistake I put the camera memory card into the DVD slot How can I get it out
I put the camera memory card into the DVD slot How can I get it out
You'll be pleased to know you're not the first (or last) to do this .
Have a look at this old thread, Cathy 1956's tip on page 1 seems to work for a lot of people:
https://discussions.apple.com/thread/2283444?start=0&tstart=0
Worth reading the whole thread as other people have chimed in with other ways of extracting the disk. -
I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..
Thanks Eric for responding.
I checked and it does not appear in the Applications folder.
I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death).
One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
Thanks again. -
How do move what is on my startup memory over to the other memory modules?
I installed extra memory into my Mac. I have used up all of the start up memory (per the notice that comes up every time memory is tried to be accessed). How do move what is on my startup memory over to the other memory modules?
Activity Monitor's window shows the RAM being used; it does not show how much of your hard drive is being used. Here is how you find out how much of your hard drive is being used:
control click on your hard drive icon and you will get a Get Info window like this:
On my MBP, the hard drive is 239 GB of which 59 GB are used and 179 GB are available.
Please post your hard drive get info screenshot. -
How to Copy a value of a String to the RAM memory?
Hi there,
I was wondering how to copy a String into the ram memory (consider you're doing right click on THIS word and choose 'Copy'; the String's Value will be to the ram memory for a later Paste).
In my application, a user has a table and he right click on it and choose Copy. I get the value of the item (Obj) but face dificulties to add it to RAM.
my code looks like this:
if (obj!=null) //inside I have the value (say: 12345 --< Obj.toString)
Action copyAction = TransferHandler.getCopyAction();
int id = ActionEvent.ACTION_PERFORMED;
String name = (String) copyAction.getValue(Action.NAME);
long l = EventQueue.getMostRecentEventTime();
copyAction.actionPerformed(new ActionEvent(XXXXXXX, id, name, l ,0));
///what comes in the XXXXXXX
}I tried, instead of the XXXXXXX, to put Obj or Obj.toString but...nothing.
Anyone?Thanks,
should implement ClipboardOwner
and do this:
StringSelection stringSelection = new StringSelection( obj.toString() );
Clipboard clipboard = Toolkit.getDefaultToolkit().getSystemClipboard();
clipboard.setContents( stringSelection, this );
@Override
public void lostOwnership(Clipboard clipboard, Transferable contents)
//do nothing!
} -
I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?
I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?
-
HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS
No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton -
How to save the files to a USB memory plugged into the EVS-1463RT
I am trying to collect images with EVS-1463RT by running a vi. The EVS has LV Real Time v13.0.1 installed. The vi runs well and save images to a folder ('C:\Images\') in the development PC. But, when I deploy the vi to EVS-1463RT, the vi cannot find the directory and nothing is saved in the folder. I am considering to save the files to a USB drive connected to a port on the EVS. Would it be possible to save the image files to a USB memory plugged into the EVS-1463RT? If so, what would be the file path to the USB connector?
Thanks for the information.
Then, the problem becomes where I get this "USB Storage Support". Search in the NI site doesn't tell me much other than something related to LabVIEW Communications System Design Suite. Is that what I need? I am not sure if I have it. If it is not easily available, another option can be using a CompactFlash card as long as I know the file path to use. Thanks. -
Unable to access Web Method after deploying into the server
Hi,
I'm Unable to access Web method after deploying into the server.
My Web method is
[WebMethod]
[ScriptMethod(ResponseFormat = ResponseFormat.Json )]
public object getOwners()
DataTable dt = _qbObj.returnDDLData("employeedetails", "EmpID", "EmpFirstName");
if (dt == null)
return new { Result = "Error", Options = "Error getting data" };
string[] strAttributes = { "ID", "Name" };
string[] strColName = { "EmpID", "EmpFirstName" };
List<SolOwners> lstObject = convertToList(dt, strAttributes, strColName, new SolOwners());
var owners = lstObject.Select(c => new { DisplayText = c.Name, Value = c.ID });
return new { Result = "OK", Options = owners };
When I.m accessing that method after deploying into server, I got following error.
System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: <>f__AnonymousType9`2[System.String,System.Collections.Generic.IEnumerable`1[<>f__AnonymousTypea`2[System.String,System.String]]] cannot be serialized because it does not have a parameterless constructor.
at System.Xml.Serialization.TypeScope.GetTypeDesc(Type type, MemberInfo source, Boolean directReference, Boolean throwOnError)
at System.Xml.Serialization.XmlSerializationWriter.CreateUnknownTypeException(Type type)
at System.Xml.Serialization.XmlSerializationWriter.WriteTypedPrimitive(String name, String ns, Object o, Boolean xsiType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write1_Object(String n, String ns, Object o, Boolean isNullable, Boolean needType)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write71_anyType(Object o)
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
--- End of inner exception stack trace ---
at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id)
at System.Xml.Serialization.XmlSerializer.Serialize(TextWriter textWriter, Object o, XmlSerializerNamespaces namespaces)
at System.Web.Services.Protocols.XmlReturnWriter.Write(HttpResponse response, Stream outputStream, Object returnValue)
at System.Web.Services.Protocols.WebServiceHandler.WriteReturns(Object[] returnValues)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()Please help me to solve that issue.Thank you.Hi Vani,
What project are you developing? According to your code looks like an Asp.Net application? Am i right?
If so , please repost in ASP.Net Forum
http://forums.asp.net for more efficient responses.
This forum is discuss problems of C# development.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
HT2801 I inserted a memory card into the DVD in my imac
I inserted a memory card into the DVD in my imac and was wondering what external DVD drive will work with an iMac 21.5" late 2010. Would take it to be fixed but they take too long and can't really be wothout this computer. Thanks.
turn it off, and turn it on its side and see if you can gently shake it out. You could also cut a firm piece of cardboard in the shape of a hook to help fish it out. Also, any external dvd player will work.
-
Can I upgrade the ram memory of my Macbook air from 4gb to 8gb?
Anybody knows if I can upgrade the ram memory of a Macbook Air from 4gb to 8gb?
Welcome to Apple Support Communities
The memory in the MacBook Air is soldered onto the logic board, so you can't upgrade RAM after buying your computer. It's important to buy your MacBook Air with the amount of memory you will use because you won't be able to install more RAM -
How much RAM is built into the current Airport Extreme?
How much RAM is built into the current Airport Extreme (5th Gen)?
The only RAM that's likely onboard is whateve is used by the hardware and would be soldered to the board. One would need to disassemble it in order to determine what if any RAM is on the board. There is no user-accessible RAM.
-
I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
Thanks for any help
OS = Windows Vista.CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
MULTIPROCESSOR SUPPORT NOT FOUND
SUCCESSFULLY REPAIRED - STEP BY STEP
I made the repair for Elements 5 on an XP version Operating System PC by doing this:
I went to....
Start / All Programs / Accessories / Windows Explorer
and selected.....
My Computer / C:
which is my drive with its operating system where Photoshop is installed.
I then clicked....
Documents and Settings
Then - in each - of the three icons I found.....
All Users, Default User, and Owner
I went into....
Application Data / Adobe / Photoshop Elements
In that last file I removed ALL the contents.... IN EACH !
After rebooting, my Photoshop Elements 5 started to work.
I think with research and all I invested five hours. May this save you 4 1/2.
I was paranoid and put the contents of each file into a new file I identified
clearly in case it I have to replace one of the parts out in the future.
I hope this is of help to some future reader.
Other comments here seem to indicate that this solution has
worked in version 4 and up and fixed early versions of Vista.
This appears to be a common problem after a drive repair or partitioning.
Why they can't just tell us this is a mystery to me.
-- Bon Courage! --
Ken -
I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.
Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M
Maybe you are looking for
-
How to updated all program in one way
Hi All, I have 3000 list of programs and i want to insert one(same) function module in every programs so is there any way through which i can insert it instead of hard coading? Because there is no sence to edit 3000 program. Please Help me.
-
Difference between free space reported by my iPod Touch and iTunes
Why is so different the free space reported by my iPod Touch and iTunes?, which of both devices is reporting the correct free space? also, I restored my iPod two days ago because "other" space was too big (almost a gig), three days later, is over 500
-
Why won't my Ethernet cable work on my Windows Partition on my iMac?
I have just purchased an iMac and have set up a Windows 7 partiton. However my ethernet connection that works just fine when I use the Mac OS does not work at all on my windows partition. It will not let me update my driver since the driver apparentl
-
How to set DataGrid one cell colour
I want to set one cell colour in DataGrid,for example,when a set a CheckBox in DataGrid ,I want letset this Cell's colour change
-
Dear Gurus and Experts. I'm trying to reverse engineer had made a model of the Hyperion Planning. After configuring the topology. Steps: A) Physical Architecture: machine.mycompany.com: 11333, user / pdw (here's Hyperion Planning) Physical Layout: Ca