Unable to assign new sales document type to sales area.

Hi,
I had created new sales document type. While I assigning to sales area it showing error " Define <XXX/XX/XX > first as a general sales area." I had already created sales area in enterprise structure. I had configured Combine sales org, dist channel & division also. Kindly help me on this.
Regards
Nagendra

Hi,
I hope you have maintained following Settings:
SPRO --> IMG --> Enterprise Structure --> Definition --> Sales and Distribution --> Define, copy, delete, check Sales Org
SPRO --> IMG --> Enterprise Structure --> Definition --> Sales and Distribution --> Define, copy, delete, check Distribution Channel
SPRO --> IMG --> Enterprise Structure --> Definition --> Logistics - General --> Define, copy, delete, check Distribution Channel
SPRO --> IMG --> Enterprise Structure --> Definition --> Logistics - General --> Define, copy, delete, check Plant (In case)
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Sales Org. to Company Code
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Dist. Channel to Sales Org.
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Divsion to Sales Org.
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Set up Sales Area
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Sales Org.-Dist. Channel-Plant
SPRO --> IMG --> Sales and Distribution --> Master Data --> Define Common Dist. Channel
SPRO --> IMG --> Sales and Distribution --> Master Data --> Define Common Division
SPRO --> IMG --> Sales and Distribution Channel --> Sales Document Header --> Define Sales Doc. Type
SPRO --> IMG --> Sales and Distribution Channel --> Sales Document Header --> Define No. range Sales Doc.
SPRO --> IMG --> Sales and Distribution Channel --> Sales Document Header --> Assign Sales Area to Sales Doc. type
Best Regards,
Amit

Similar Messages

  • Error in assigning sales document type to sales area

    Dear All,
    I am trying to assing sales document type to sales area, but system is not allowing me to do that
    I am having this error message
    " First, maintain the sales area <1000/14/00> as a common sales area, and
      then assign allowed sales document types. This means: Complete the IMG
      activity Assign sales area to sales document types in the sequence
      entered here."
    Note:
    I have never created a distribution channel "14" and division "00" then why system is asking me to define this as a common sales area.
    How can I maintain common sales area ?

    Dear Ali,
    1.You go to VOR1 transaction here you check what is the distribution channel assigned as common distribution channel for your sales organisation and distribution channel ,if it is improper then maintain correct Distribution channel.
    2.You go to VOR2 transaction here you check what is the division assigned as common division to your sales organisation and Divisionif ,it is improper then maintain correct Division.
    3.You go to OVAO transaction here you assign reference sales organisation to your sales organisations.
    4.You go to OVAM transaction here you assign reference distribution channel to your sales organisation and common distribution channel.
    5.You go to OVAN transaction here you assign reference division to your sales organisation and common division.
    6.Finally you assin sales document type to your referenced sales area.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Nov 11, 2008 5:58 AM

  • Sales Document type to Sales area

    Dear all,
    I am trying to assigning new sales document type to a sales area but it error occurs
    "Define<1000/16/04>first as a genera sales area" how to resolved?
    Message was edited by: G Lakshmipathi
    Please use the subject effectively

    Please search the forum or Google with the same text so that you will find many times this has been discussed.  Please go through the forum rules which you can see to your right screen and adhere to that
    G. Lakshmipathi

  • Issue With Sales Document Type in BW.

    Dear Experts,
    I am facing an Issue with Sales Document Type(Object name is 0DOC_TYPE).
    when i am loading data from R/3 to BW It is converting Sales Document type as follow
    Sales Document Type in R/3                         Sales Document Type in BW
    OR                                                                        TA
    CR                                                                        G2
    DR                                                                        L2
    I check with an ABAPer and he told that there is conversion exit for this Object so that's why it is converting when sending to BW. But the user wants to see in Report same as it is in R/3 like OR, CR DR ... etc.
    I have done some investigation and found that the conversion exit (CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) are converting the values based in the table TAUUM
    The staructure of TAUUM is
    MANDT(Client)  SPRAS(Language) AUART(Sales document type (not converted)   AUART_SPR(Language key for sales document type)
    and values are
    100 E TA OR
    100 E G2 CR
    etc....
    The same Conversion exits(CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) and table TAUUM are available in BW as well. So i thought I can Use InfoObject 0DOC_TYPE by changing it's conversion Routine as AUART(which runs based on the above mentioned conversion exits).
    but the the problem is table TAUUM(Pool Table) does't have any data in BW.
    So can anyone tell me is there any option to load data into table TAUUM from R/3 or any other option to solve this issue.
    Your ideas will really help's me.
    Thanks in advance,
    Dara.

    Hi Venkat,
    Thanks a lot for your immediate response.
    The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
    I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
    Could you please let me know if there any other options.
    Thanks in advance,
    Dara.

  • How to configure a new third party sales document type?

    Hi SAP SD gurus,
    I am new to the SAP world, I need your help in configuring a new third party sales document type for a site.
    There are existing third party document types being used in the region, but the client wants an entirely new third party document type that is activated for CREDIT MANAGEMENT.
    I just need your inputs, as how to go about it. If I copy from an existing third party sales doc. What additional steps do I need to follow? Like Item category config, copy control settings, and credit management.
    Is there a need to create new billing types?
    Also as per process, by creating a new document type, how will it affect the logistic processes, if any?
    Thanks a lot in advance for your valuable inputs.

    Hello,
    You can create new document type under following customization path
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Define Sales Document Types
    Now create new document type by copying the standard document type OR
    Now go to
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Define Item Categories
    which is already defined for third party sales (TAS)
    Now assign this iteme category to your new document type
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Assign Item Categories
    Assignment needs to be done in combination of sales document type and item category group (BANS)
    Now
    SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Schedule Lines
    Assignment of schedule line is already done as you are using the standard one.
    Lastly, you may need to maintain copy control for your newly created sales document type for this go to
    SPRO>>Sales and Distribution>>Sales>>Maintain Copy Control for Sales Documents
    (Copying Control: Sales Document to Sales Document)
    Here you can define copy control requirements.
    BR,
    Tushar

  • Assign document type to sales area

    Hi,
    I created a new document type and know when i assign this document type to sales area < 1000/10/10 >, its giving an error message " define < 1000/10/10 >first as general sales area" .
    I defined an sales area with that combination. can anyone help me in solving this?
    Thanks,
    Challa

    Hi,
    Step 1.
    IMG (SPRO) -> Enterprise Structure -> Assignment -> Sales and Distribution -> Set up sales area.
    Step 2.
    IMG (SPRO) -> Sales and Distribution -> Sales -> Sales Documents -> Sales Document Header -> Assign Sales Area To Sales Document Types:
    a. Combine sales organizations
    b. Combine distribution channels
    c. Combine divisions
    d. Assign sales order types permitted for sales areas
    Arthur.

  • SAP SD Material Determination not reflected in assigned sales document type

    Hi Experts,
    I have implemented customized material determination, with requirement to change the UoM of the entered material, from GJ to MJ. I have assigned the procedure to 3 document types:
    1. sales order type
    2. credit memo request
    3. debit memo request
    However, this setup is only reflected in the 1st sales document assigned with the procedure. It is not reflected in the credit or debit memo request.
    I have turned on the material determination analysis in sales order. Per my checking during credit memo request creation, the analysis indicated that the condition is found successfully. But the UoM did not change in the document.
    Please assist.
    Thank you.
    HJMY
    Edited by: HJMY on Sep 20, 2011 1:24 PM

    Hi Ravi,
    Thx for your reply.
    But I am creating credit/debit memo request without reference to billing.
    When I create credit/debit memo request, the material determination is triggered.
    Per my test today for credit memo request, I found that the material determination is triggered.
    However, the substition UoM is not reflected in the credit memo request document.
    The result is reflected only in sales order.
    Please help.
    Edited by: HJMY on Sep 21, 2011 3:28 AM

  • Assign partner determination procedure to Item Category/Sales document type

    Hello All,
    How can I assign a partner determination procedure to an item category or sales document type? That field is disabled in item category config step. Please suggest.
    Thanks,
    lavanya

    HI Lavanya,
    The partner determination will happen through a different way and not through item category definition.
    The path would be
    S&D->MAster Data->Bussiness partners->customers->Customer hierarchy->set partner determination for hirearchy categories.
    In this you will have one option to define by item category.
    Hope this helps.
    Abhishek

  • Why should we create a new sales document type

    I want to know the actual reason behind creating new sales document type when the standard document is available

    General procedure when setting up sales document types
    You have three options for configuring new sales document types:
    1. Change an existing sales document type.
    2. Copy an existing sales document type and change it according to your requirements.
    3. Create a new sales document type.
    Recommendation
    For small changes, SAP recommends that you copy similar existing sales document types in the standard SAP R/3 System and make the appropriate changes. Small changes might, for example, be, a changed description, a different number range or a different increment for the numbering of items.  The name is to start with the letter Z as SAP keeps this range free in the standard system.
    This procedure has the following advantages:
    All the specifications of the existing sales document type are copied. In particular, the data concerning, for example, partner determination, pricing or document flow which you would otherwise have to edit manually is copied.
    You can test your new sales document types in respect to the settings made without having to edit the other settings.
    When copying sales document types, item categories and schedule line categories, the SAP R/3 System automatically creates a log with the copied data. Using the log, you can check whether all of the copied data applies to your sales document type or whether you need to make changes.
    Actions
    1. If you need to make further changes, you should define new sales document types. To do this, you enter an alphanumeric key with a maximum of four characters for a sales document type and a textual description for the key.
    2. Maintain the specifications on the detail screen according to your requirements.

  • New indicator value in sales document type

    Hello,
    Indicator field in sales document type transaction VOV8 has certain predefined values.
    Where are this values assigned?
    Thx

    Hi Loy,
    Here you go: SAP ERP Sales and Distribution (SAP SD)
    Cheers,
    Johnny

  • Probablity Assignment in Sales document type

    Dear Friends
                    In Sales Document Type OR in General Control Section there is one field of Probabilities "100" in display mode. How I can create or customize say 50, 90 etc along how assign it.
    Regards
    arun

    Hi
    This field determine the probability of converting the perticular sales doc in to Invoice .
    When sales order is created that means the order from customer is firm and its probability is 100% .
    But if u see the probability of converting Inquiry and Quotation into Business is less than 100 % always .
    It will be depend on Many factor which include past record of buying of a perticular customer etc .
    As Sales Order is a assure Business to a company from Customer the probability of converting it into Invoice is taken as 100 % and there is no need to chnage it .
    Hope this help
    Hope this help.

  • Issues in creating Sales Document Type

    I am creating a new Sales Document Type, but the problem is this that the "Probability"  &
    "Incompl. Proced"  fields are disabled and I am unable to enter record in this field , please help me out that how can I enter values in these fields.

    Hi shadab ali
    You will be configuring  the Incompletion procedure in SPRO->basic functions->Incompletion log procedure.
    There to your sales document type an incompletion log will be assigned and that incompletion log will be getting grayed out. So if you want to change you need to change in in Incompletion log procedure. And the probability will be getting grayed out as it is determined by the Sales document  category .That is the reason if you see for document type IN the probability will be different and if you see for document type QT probability will be different but if you see for document type OR the probability will be 100%.Generally it gets copied from the CMR also.
    Regards
    Srinath

  • Immediate Transfer Order Creation not occuring for Sales Document Type

    Hello gurus,
    I have a situation where a transfer order is not being created immediately for a specific sales document type.
    Here is an example document flow of a desired scenario where the system is working:
    Sales document type:  ZOR
    >  Delivery type:  LF
    >  WMS transfer order
    The Item Category in this scenario is TAN.
    Here is an example of the document flow in the current scenario where the system is not working:
    Sales document type:  ZPRD
    > Delivery type:  LF
    The Item Category is also TAN in this scenario.  The only identifiable difference in these scenarios is the sales document type.  For the ZOR SaTY, a Transfer Order prints immediately once the delivery is created.  For the ZPRD SaTY, a Transfer Order needs to be manually created after delivery creation.
    Is there a configuration setting that is controlling this?  Any help would be greatly appreciated.

    Thank you very much for the link.  When I insert the WMTA output type in the delivery output header, the Transfer Order is automatically created.
    The problem I'm running into now is the configuration setting that controls this.  I thought I figured it out when going to this IMG path:
    SAP Customizing Implementation Guide  -->  Logistics Execution -->  Shipping -->  Basic Shipping Functions  -->  Output Control -->  Define Print Parameters Shipping
    When selecting the Delivery Note, the shipping point I was using was not configured in this location.  I added the shipping point into this transaction, saved, and created a new order & delivery.  However, the WMTA output type still was not automatically inserted into the delivery when saving.  Is there another location I should be looking to fix this so that when I enter an order with a particular Shipping Point, the WMTA output type automatically appears in the delivery?

  • Assignment of billing document type with accounting document type

    Hi
    I need one information regarding SD Billing Document type assignment with accounting document types.
       Here CRM people asking me where we can see if the Billing doc type is BV( Cash Sale)  accounting document should be RV
    Just go to T.Code VOFA for Billing document types. Based on this only system generate the Accouning documents RV, AB so onu2026u2026.
    But how it is determining this accouning document type they want to know.
    Pls advice

    In VOFA where it says Document type enter the FI doc type they want to post to. Otherwise it defaults to RV.
    pls assign pts to say thanks.

  • What are the img setting to be fullfilled while copy the Sales document typ

    Hi What are the setting to be fullfilled while copy the sales document type and item category.
    Note:  I have already copied, but unable do the PGI(Post goods issue),  and Billing.
    Thanks
    Prasanna

    Hi
    Answer for this Question.
    we have set the copy control for sales order type and delivery and billing
    Regards
    Prasanna R

Maybe you are looking for