Unable to cancel a splitted internal sales order line

Hi,
I have created a internal sales order using internal requisition. at the time of shipping i recognized only partail amount to be shipped and rest is not required.
so i shipped the partial qty and then tried to cancel the splitted line which is not required for me. iam getting the belwo error message.
1. Ordered Quantity, Supply picture has been updated. A discrepancy exists between the Sales Order and its corresponding Internal Requisition.
2. Schedule Ship Date, Supply picture has been updated. A discrepancy exists between the Sales Order and its corresponding Internal Requisition.
3. Error: Shipping tolerances cannot be changed now because the source lines have at least one delivery line that is staged or has been shipped.
iam getting the above 3 message and coz of that iam not able to proceed for cancellation.
can anyone suggest what would be the workaround
Thanks,
Vinod

Hi,
Is this 11i or R12?
Thx
Raghavendra

Similar Messages

  • Split one sales order line into multiple item line on invoice

    Hi,
    When create proforma invoice from sales order (TCode, VF01), we can have multiple batches for on sales order item line. On invoice, we have requirement to make each batch become a single invoice line. Any help on how to do the split?
    Thanks.
    --Wenning

    Are you talking about a report to show all the line items of the order. MAy be I didnt understand you correctly.
    The key to both the tables is VBELN.
    However for any Invoice the line item in in VBRP tbable and the corresponding Header in VBRK.
    You could write to query to combine the lines in VBRP to one line based on your requirement.
    Shreekant

  • Split Sales Order Line - by Delivering Plant ?

    Hi there,
    Does anyone know (config or ABAP) how to split a sales order line for this scenario:
    1 Sales Org - SOrgA
    3 Plants (PlantA, PLantB & PlantC)
    Can fulfill SOrgA sales orders from all 3 plants
    No WM
    User enters MatA Qty 10 on sales order line item 1.
    MatA has qty 5 in plantA and qty5 in PlantB.
    System gives Qty 5 to line item 1, reduces qty requested to 5.
    Stytem creates new sales order line & gives Qty 5 to new line item 2.
    I am essentially trying to fulfill the sales order from multiple plants but so far in R/3 I do not see any way to do this with config. Alternative is to do this manually but business requirement is to automate it.
    Any ideas?
    Has anyone done something similar with ABAP?
    Thanks,
    Niall

    Thanks for your comments Ashutosh,
    My strawman schema is currently:
    Biz Hours:
    Orders created.
    Nightly:
    [No (minimal) orders being entered so allocation should be a non-issue or very minimal].
    Backorder rescheduler job runs
    Bespoke job runs to split lines if can fulfill from multiple plants
    - it may be FIFO based on a combination of dates such as customer delivery date and delivering plant lead time (will be bespoke)
    Delivery Due List runs
    Currently our sales order lines have delivering plant (e.g. from customer master, CMIR or material). Against this plant ATP is run, even though the material may also be in another plant. The business issue is that sometimes, for some customers, we want to fulfill the order from a different plant or combination of different plants.
    This is not for every order thankfully!
    N.

  • Can we combine Query for cancelled requisitions and query for internal requisitions without internal sales order into a single query

    Hi All,
    Greetings.
    I have two queries namely,
    1.Query for cancelled requisitions and
    2.Query for Internal Requisitions without Internal Sales Orders.
    I was on a task to combine those two queries..
    Can we do that? if so, please help me do that..
    Thanks in Advance,
    Bhaskar.

    Hi All,
    Greetings.
    I have two queries namely,
    1.Query for cancelled requisitions and
    2.Query for Internal Requisitions without Internal Sales Orders.
    I was on a task to combine those two queries..
    Can we do that? if so, please help me do that..
    Thanks in Advance,
    Bhaskar.

  • Cancel Sales Order lines that are picked

    Hi
    1. I'm trying to cancel sales order lines through process order api that are picked and delivery status is Staged/Pick Confirmed. The error is
    You are not allowed to cancel Order Line because:
    Line has been pick confirmed/staged.
    I'm unable to perform by below means
    1.There is a processing constraint on the field SCHEDULE_ARRIVAL_DATE.
    Delete the processing constraint and retry the cancel line process - Processing constraint form the fields are protected against update
    2.Navigate to the shipping transaction form and query the order. Select the line and enter 0 at shipped quantity.Save the record.Ship confirm the line, this will cause the line to be backordered.Query the order line in the order entry form and cancel this. - Shipping transactions form the fields are protected against update
    2. Is there a way to cancel Internal Sales Order(ISO) lines of one OU and the corresponding internal requisition is another OU
    Thanks
    kumar

    If you are in R12, there are some enhancements from Oracle that allows updating/cancelling certain Internal requistion fields and Internal orders automatically. You may need to disable few processing constraints too.
    As of Now Oracle support change to following attribute at OM side
    1 Order Quantity
    2 Request Date
    3 Schedule date
    4 Arrival date
    Similarly if we make changes in following fields in Approved IR
    1 Quantity
    2 Need by Date
    These changes will got reflected in ISO
    Plus cancel the IR line or ISO line, the other one gets cancelled automaically.
    To cancel the picked line, first undo the pick confirmation process by back ordering. or unassign the delivery details from the delivery (if created already) and cancel the delivery.In either case, you need to manually trasnfer the qty from staging area to original locations. Oracle doesn't automatically move the qty back, (undo move order transaction).
    Ganesan.

  • OM: Sales order lines are cancelled automatically without backordering.

    Intercompany sales orders lines are being cancelled automatically on the delivery when a split line is shipped with a quantity of one remaining. This line should remain backordered. A quantity of 61 was entered and 60 was shipped and 1 remaining. This 1 should have been backordered but no new line was automatically generated and infact when I view the Additional information I can see that the quantity 1 is cancelled. The profile option OM: Under Shipment Tolerance is set to .5

    HI,
    You can cross check by running the AUDIT HISTORY REPORT in Order Management, which gives the in depth details of the sales order amendments.
    Thanks,
    Raghav

  • Sales order line for Non Stock items progressed to Closed status, need to be Cancelled.

    Hi,
    First time posting to this community, I hope someone can help.
    Currently we have a setup where non stock items are being added to sales order lines (charges, etc.).
    These lines are being progressed through to Closed status automatically.
    Users are reporting that they have entered the line in error and would like to change the status of the line to Cancelled.
    We are unable to return the material (RMA) as it is non stockable/transactable etc.
    Current workaround is to adjust the stock and make finance aware so that the line does not get invoiced.
    However, the system still shows that the line is closed (i.e. provided to customer) which is not correct.
    Is there any way of getting the line to a status of cancelled?
    Your help is very much appreciated.
    Regards
    Tim

    Hi Arif,
    Many thanks for the warm welcome.
    I'm thinking the only course of action I have for future, is to make the items stockable/transactable/returnable such that an RMA can be performed if added in error.
    We can put a large qty into stock at zero value.
    Thanks for your help in any case.
    Tim

  • How to split cost allocations for sales order lines?

    Has anyone here solved a requirement to split the cost of goods sold from a service request debrief.
    The scenario is -
    1.  A debrief of a service request is completed.
    2.  Material is issued and technical labor used and expenses incurred.
    3.  I am hearing that in Oracle Service, the material is only costed but not the technical labor and expenses.
    4.  No splitting can occur in any of the cases through standard Oracle?
    5.  We have gone down the path of creating sales order line types for each department (unique code combination) and then splitting the COGS in SLA.
    6.  This way, we have to create items for labor and expenses.
    Is this the only semi-standard way.
    Thanks for your thoughts in advance.

    Hi
    I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
    The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
    Many thanks

  • Error in cancelling sales order line using process order API

    Hi,
    I have created a sales order which is in booked status. I want to cancel the order line . when I am running the concurrent request I am getting the following error message.I am using the process order API to perform this operation.
    API Error Message You are not allowed to update Inventory Item because:
    line has been booked
    API Error Message You are not allowed to update Line Type because:
    Line is Booked
    Can anyone help.
    thanks
    Ashwini

    Hi,
    What is the application release?
    What concurrent program you are running? Is it a custom or seeded one? And, what is the API name?
    Please see if these docs are applicable.
    Unable To Manual Mass Update Items For Multiple Booked Sales Order Lines [ID 887905.1]
    Cannot Update Ordered Item To Related Item On Booked Sales Order Line [ID 298796.1]
    Thanks,
    Hussein

  • Customize Internal Sales Order workflow to interface to AR

    Hi,
    I would like to generate AR transactions for our internal sales orders created from internal requisitions. I tried by adding a ship-bill-workflow, but the interface-to-AR activity does not get started. This gives me the impression that the internal order ignores the workflow that I have defined for this transaction type, and uses something else instead.
    I am wondering now how could I customize the internal order workflow? Has anyone ever done that? Which workflow shall we customize to get what we need? Or has anyone any other ideas?
    Thanks in advance,
    David.

    Hi David,
    Assuming you are using Order Organizer did you check which work is being invoked at the Order Line Level from Tools -> Workflow Status at Line level.
    Thanks.

  • Import order not creating internal sales orders for some orgs

    Hi,
    We are getting one issue in UAT instance. The details are as below -
    1. Created Sales Orders in all 7 orgs.
    2. Ran ASCP plan
    3. planned orders got auto released in all orgs.
    4. Corresponding Internal requisitions got created in all orgs.
    5. Ran 'Create Internal Orders' from each org.
    6. Ran 'Order Import' from BE org as all the IR's were sourced from BE as per sourcing rules.
    7. Issue is that out of 7 orgs, in 2 orgs, DK and SE, the internal sales orders didn't get created and order import gave error. I am attaching the error log below.
    For other 5 orgs, ISO got created successfully and we performed picking/shipping and receiving as well for these 5 orgs.
    Any help will be most welcome.
    error log is -
    Order Import Concurrent Program
    Concurrent Program Parameters
    Validate Only: N
    Order Source: 10
    Order Ref:
    Sold To Org Id:
    Sold To Org:
    Change Sequence:
    Performance Parameter: Y
    Trim Blanks: N
    Operation:
    Number of Instances: 0
    Debug Level: 0
    Request Id: 6891
    Org Id: 2453
    Failed to perform Action Request BOOK_ORDER
    Failed to perform Action Request BOOK_ORDER
    Failed to perform Action Request BOOK_ORDER
    No. of orders found: 2
    No. of orders imported: 0
    No. of orders failed: 2
    Source/Order/Seq/Line Message
    10/1046001536//2 User-Defined Exception in Package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
    10/1046001536//2 ATP Process resulted in no data
    10/1046001536//2 User-Defined Exception in Package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
    10/1046001538//2 User-Defined Exception in Package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
    10/1046001538//2 ATP Process resulted in no data
    10/1046001538//2 User-Defined Exception in Package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
    End of Order Import Concurrent Program

    Try running the Order import from a responsibility where the profile "OM: Override ATP flag" is set to YES at that responsibility level..

  • Sales order line items delivery cancelled but still appears in MD04.

    Hi PP Gurus,
    In the sales there are 6 line items are there out of which for 1 line item delivery and PGI happened. And for remaining line items delivery got cancelled, but these line items for which delivery cancelled appearing in the MD04, I have rejected the sales order line items but these line items still shows in MD04. Please advise how to remove these line items from MD04.
    Thanks and Regards,
    SHARAN.

    Hi
    Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
    Regards
    Brahmaji

  • SALES ORDER LINE IS CANCELLED BUT DELIVERY DETAIL IS SHOING AS BACKORDERED

    SALES ORDER LINE IS CANCELLED BUT still the DELIVERY DETAIL IS showing as BACKORDERED it should be in cancelled
    status.The Sales order (only one ex:3904854) is cancelled , however order in shipping transactions screen indicates order is on backorder.
    at that time of order cancellation the line level workflow error out due to the Workflow package is inactive .
    I tried to resubmit the error out workflow using retry option from the responsibility “Workflow Administrator” the workflow is completed with forcible option but still the delivery detail is in back order status not changing it to cancel status.
    Error Name :-4068 [Error Process Error: WF Error Message: ORA-04068: existing state of packages has been discarded  
              ORA-04061: existing state of package body "APPS.XRX_SUPPLIES_NEW_WF_PKG" has been invalidated    
              ORA-04065: not executed, altered or dropped package body "APPS.XRX_SUPPLIES_NEW_WF_PKG"                         
              ORA-06508: PL/SQL: could not find program unit being called: "APPS.XRX_SUPPLIES_NEW_WF_PKG" [Error Process           Error: 3114: Activity 'WFERROR/R_ERROR_RETRY' is not a process.]
    Error Stack: Wf_Engine_Util.Function_Call(XRX_SUPPLIES_NEW_WF_PKG.XRX_CLOSE_LINE_DETAILS, OEOL, 55098479, 195982, RUN)
    [Error Process Error:   Wf_Engine.CreateProcess(WFERROR, WF5147218, R_ERROR_RETRY) ]

    Mohan
    You need a simple script to get the status corrected. Log an SR or search metalink for the script. I am sure there is one out there (if you search with the orphan reservations). This script supported, but not exactly targeted at your problem But it will solve it. You can log an SR and confirm.
    Thanks
    Nagamohan

  • Billing document should not be cancelled after creating return sales order

    Hi All,
    Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
    Sudheer.

    Hi,
    In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
    Check and confirm.
    Regards,
    Ravi Duggirala

  • How to split Sales Order line as per partial availability of stocks?

    During scheduling of Sales Order line, if ATP window shows onhand stocks less then required quantity and balance quantity is promised as per CTP on dates falling outside request dates.
    1) Is there a functionality to split SO lines Automatically basis On Hand Availability?
    2) Can we write a rule to split a line so that staggered shipments can be scheduled in future for quantities promised as per CTP ? (i.e rather than promising 1 date, if capacities permit line quantity is split to start shipments at the earliest).
    Will appreciate for direct fitment or any workaround solution to resolve above issues.
    Thanks

    Hi,
    Try this out. Go to Logistics Execution-Warehouse Management-Activities-Transfers-Processing Performance Data / TO Split
    Step1:
    Define Profiles-Sort profile for TO splitting
    Here, create a new entry of sort profile for your warehouse with field "POSNR" as 1st sort field.
    Step2:
    Define Profiles-Profile for Transfer Order Splitting
    Here, create a new entry of  Profile for TO split for your warehouse & sort profile of step1.
    Step3:
    Control for Performance Data Processing / Define TO Split-Performance data control
    Assign Profile for TO split of step2 to your warehouse, MVT, Source & Destn st. types.

Maybe you are looking for