Unable to carry out storage migration in VMM

Hi,
I am trying to carry out storage migration using VMM but I get the following error message:
VMM cannot complete the host operation on the HV01-LN1.vm.prod server because of the error: 'sps01.dev' failed to remove checkpoint. (Virtual machine
ID ABDB5F16-A9CD-4C8F-AAF8-64A0C1991285)
Cannot delete checkpoint: The system cannot find the file specified. (0x80070002). Checkpoint ID 88EF0512-62E7-423C-8C0E-A9DDA54D30A5.
Virtual machine failed to generate VHD tree: 'The system cannot find the file specified.'('0x80070002').
Failed to get VHD ('C:\ClusterStorage\EVA_CSV_DEVSTG01\Virtual Hard Disks\SPS01.DEV_95E5CA26-2EF1-4CAC-905B-57E2004B9334.avhdx') parent: 'The system
cannot find the file specified.'('0x80070002').
'sps01.dev' is missing a checkpoint. The disk paths missing used to be located at: C:\ClusterStorage\EVA_CSV_DEVSTG01\Virtual Hard Disks\SPS01.DEV_95E5CA26-2EF1-4CAC-905B-57E2004B9334.avhdx.
The system cannot find the file specified. (0x80070002) (Virtual Machine ID ABDB5F16-A9CD-4C8F-AAF8-64A0C1991285.)
Resolve the host issue and then try the operation again.
ID: 12700
Details: Unknown error (0x800b)
I'm quite new to VMM so could someone explain what the problem is as it seems to suggest there are missing snapshot but I could not see any missing (there are two snapshots)
Any help woulf be greatly appreciated :-)

Hi, did you manage to resolve this issue? I have a very similar issue where I have what looks like a parent checkpoint on a VM but the avhdx files have been remove or lost so I cannot remove this checkpoint. I cannot do anything with the VM whilst its there,
like migrate and backup using DPM.
Thanks.

Similar Messages

  • Unable to carry out calculation of keyfigure with it's total summation taken on keyfigure

    Hi,
    For a requirement, we are trying to calculate division of a keyfigure with it's total summation of key figure.
    For example:
    Sales Office
    Order Reason
    Invoice Volume
    MRV Volume
    % of MRV Volume to total invoice volume
    % of MRV Volume to total MRV volume
    1504
    A1
    10
    2
    (2/90) = 2.22
    (2/27) = 7.40
    A2
    5
    3
    3.33
    11.11
    A3
    20
    10
    11.11
    37.03
    A4
    30
    5
    5.55
    18.51
    A5
    25
    7
    7.77
    25.92
    Total
    90
    27
    30
    100
    Here, Sales office and order reason are dimensions.
    Invoice volume and MRV volume are key figures.
    Following are the formula used to calculate other two keyfigures.
    % of MRV Volume to total invoice volume =  MRV Volume / Total ( Invoice Volume ) * 100
    % of MRV Volume to total   = MRV Volume / Total ( MRV Volume) * 100
    Kindly help us to get calculation of above two keyfigures to be carried out through BEx query designer.
    I tried out aggregation at order reason on Invoice volume, MRV Volume by creating two new formula keyfigures with the aggregation, but couldn't get desired output.
    Regards,
    Antony Jerald.

    Hi Antony,
    Use the same formula for these two keyfigures in BEx with SUMGT instead of Total.
    % of MRV Volume to total invoice volume =  MRV Volume / SUMGT ( Invoice Volume ) * 100
    % of MRV Volume to total   = MRV Volume / SUMGT ( MRV Volume) * 100
    Regards,
    Srilakshmi B

  • Unable to carry out MRP for make-to-order

    Dear All,
    I have a six level Bill of Material ( BOM ) .I am using planning strategy 20 make-to-order producton.
    There is no stock for any of these materials.
    Now when i try to run mrp on sales order basis it is not planning for all the levels of the BOM.The MRP Stops planning at 3 or 4th level.The MRP Run does not give any error.
    Is there any setting to carry out MRP out MRP for all level of BOM?
    I checked the setting in 0001 plant and compared them with my plant they are same.THE SYSTEM IS DOING MRP IN 0001 PLANT FOR ALL LEVELS
    so pleses help me on these issue.
    Regards
    Prashant

    Hy Prashant,
    If you want to carry out MRP with MD50 for all levels of BOM then check this things,
    For all the BOM components (up to last level) check in MRP 4 view of Material master
    - Individual / Collective - It should be Individual or Individual/Collective.
    If is maintain as Collective then you will not get planing Proposals though MD50.
    - For all BOM headers Materials (Fert , Halb ) check in MRP 4 view for MRP for Dependent requirement should be maintain as Dependent requirement are Planned
    Check the above things and if not maintain then maintain it and then run MRP with MD50.You will get the Planing proposals for all levels of BOM.
    Regards,
    Dhaval

  • HT4859 Last time I synced my IPad with my PC it migrated all my "Favorites" (about 100 folders) to the ICloud. I have searched and so far been unable to find out how to recover my "Favorites" list from the ICloud back to my PC. Any advice? Many thanks.

    Hi, Last time I synced my IPad with my PC, it (unknown to me) migrated all my PC "Favorites" (about 100 folders) to the ICloud.
    I have searched and so far been unable to find out how to recover my "Favorites" from the ICloud back to my PC. Any advice would
    be appreciated. Thank you.

    What did you do to get them synced to the Cloud.  Would that procedure help me get my favorites synced to my iPad2?

  • I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

    I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

    What OS on your Mac?
    What iOS on your phone??

  • HT4796 Are there any unanticipated problems in carrying out the procedure outlined for 'Windows Migration Assistant'?

    Are there any unanticipated problems in carrying out the procedure outlined in the 'Windows Migration Assistant' instructions?

    One I have seen mentioned a couple of times is it will set up an identical user account on the Mac, which has led to some problems.
    I don't know how to fix this since I haven't used Windows since 1995.

  • In SRM Portal, while doing carry out sourcing, unable to select "Create Draft" Button Choice.

    Hi,
    In SRM Portal, while doing carry out sourcing, we are unable to select option "CREATE DRAFT"  Button choice. We have two users, one with standard role "/SAPSRM/ST_PURCHASER - SAP SRM: Strategic Purchaser" for whom Create draft is working fine. Another user who has the custom copied version of this role is not able to Create Draft since the button choice option is not opening for him.
    Web dynpro component - /SAPSRM/WDC_DO_SOCO_GAF_2
    View                            -  V_AO_SOCO_GAF_2
    Could you please help me to locate the code where this button choice is populated? What are the parameters that need to be checked in Roles to identify the reason for this wrong behaviour with custom role?
    Regards,
    Jeena

    Hi,
    Check entries in SM30 --> /SAPSRM/V_SOCO but, there should not be any issues here, as you are telling that it is working for Standard Role.
    Please overwrite the Z role one more time, and ensure that you have given proper authorization in the Org Level of the Role and regenerate the profile. It should work.
    Ganapathi

  • Not all storage bins in LX16 transaction Carry Out continous inventory

    Hello,
    I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
    Can somebody help us??
    Thanks in advance

    hi
    LX16 transaction is only for " Continious Physical inventory Counting Only"
    LX03 is for bin status Report
    Take Continuous Inventory
    Purpose
    With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
    Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
    The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
    Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
    With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
    When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
    Prerequisites
    Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
    Process Flow
    To run a continuous inventory, you need to complete the following steps in the order displayed:
    Plan the inventory by selecting storage bins, for which you want to take inventory.
    Create the system inventory record
    Activate the system inventory record
    Print the warehouse inventory list.
    Take physical inventory in the warehouse.
    Enter the inventory results
    Close the inventory
    Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
    hope this helps to solve your issue
    regards
    KKY

  • OS X 10.4.11 Unable to print photos. Error message, "There are no themes located. Until at one theme is istalled this cannot be carried out" Please advise. Thanks

    OS X 10.4.1 Unable to print photos. Error message appears, " There were no themes located. Until at least one theme is installed this cannot be carried out." please advise.

    Check out OT's post in this thread:
    http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
    Also, note his comments here:
    http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
    > Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
    Regards
    TD

  • How to increase storage migration job timeout in SCVMM 2012 R2

    Hi,
    I needed to move a VM 2+TB in size on slow storage to another volume. The VM was turned off. The VMM job failed after 9 hours and 23 seconds with following error:
    Error (2924)
    Unable to complete the request. Operation on the hyperv1.company.local server timed out.
    Recommended Action
    Try the operation again.
    VHD files were copied to destination successfully, but were not removed from source and also the VM was not imported from the destination location.
    So it looks like there is 9 hour default timeout for storage migration jobs in VMM.
    How to increase this timeout?
    Thanks,
    Egils

    Brian,
    If you got the same timeout error sooner then my assumption that this is 9 hour file copy timeout was wrong.
    In my case the files were copied successfully, the VM was was removed from Failover Cluster and Hyper-V (unregistered in source location), but was not registered in destination location, so it might be that timeout occurred during registration of the VM in
    destination location.
    Unfortunately the SCVMM error message does not include any details about the timeout.
    Btw, there are some SCVMM timeouts that can be changed, like
    http://support.microsoft.com/kb/2790310
    http://blogs.technet.com/b/vishwa/archive/2011/02/01/tuning-scvmm-for-vdi-deployments.aspx
    and WinRM timeouts
    http://blogs.technet.com/b/jonjor/archive/2010/04/21/intermittent-connectivity-issues-and-cluster-refresh-times-with-windows-2008-r2-and-scvmm-2008-r2.aspx
    Egils

  • Storage Migration

    Hi Experts,
    We have SAP ECC 6 with Oracle 10g and HCM module is implemented.
    We are planning to migrate our storage from EmC2 to NetAPP.
    Can anybody give me the idea how to carry out the task.
    Thanks in advance.
    Biswajit

    Hi,
    You need to perform system copy in order to migrate your system on new storage.
    Thanks
    Sunny

  • Document Cancellation can not be carried Out

    Dear SAP experts,..
    I met a problem when carry a document cancellation..
    We had a material which incidentally exist without batch management and so, the material don't have batch number and so its Shelf Life Expiration Date.
    The material was used as usual. (Used for production process by Goods Issue for Production Order)..
    The condition keep going for about 3 weeks until the end user had a mistake with her data entry and so the document must be cancelled.
    The cancellation can't be carried out, and the message shows "Enter Shelf Life Expiration Date".
    My Question :
    - Why was Goods Issue transaction could be carried out without SLED and the cancellation must be carried out with SLED ..??
    - What is the best action to solve this problem...
    Regards,
    Hachi

    Dear,
    Are you getting message 12019?
    Have you maintained the SLED in Plant storage view 1 in material master?
    Set customizing so that it is not necessary to enter such a date for the used movement types. Maintain the data by using Transaction SM30 in View V_156_MHD.
    Or
    Deactivate using Customizing
    Customizing via the following path:
    Materials Management --> Inventory Management/Physical Inventory  --> Goods Receipt --> Set expiration date check.
    You should  deactivate the check for the used movement types,
    Regards,
    R.Brahmankar

  • Operation ' Change Attribute TSTATE ' could not be carried out for Request

    hi,
    i am unable to delete the request Id  from  DSO. and when i checked that, it says request is partially activated(error occured during the activation)
    and when i checked the logs i got the following error messages:
    Operation ' Change Attribute TSTATE ' could not be carried out for Request 609249
    Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '      361'
    i even thought it was BASIS issue but it was not.
    due to this error the process chain is failing daily
    kindly help
    regards
    laksh

    hi arvind,
    i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
    but the problem is still there
    regards
    Laksh

  • Operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not listed in applications. have downloaded install app but cannot carry out the installation. am informed flash player is blocked.

    operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
    thank you!

    Hi Anne,
    Your version of Safari is still supported.  Please see Adobe Flash Player | Tech specs for supported OS and browsers.
    If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari.  This has nothing to do with whether or not Flash Player supports the browser.
    I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it."  Flash Player.plugin only works in the browser to view Flash content in the browser.  The plugin does not open files outside of the browser.  If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
    Google Chrome does embed Flash Player in it, while Firefox does not.   Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
    Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
    Maria

  • Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE

    Dear all,
                   i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
    Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
    ...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
    Thanks in advance,
    Naren

    >
    naren wrote:
    > Dear all,
    >                i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
    >
    > Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
    > ...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
    >
    > Thanks in advance,
    > Naren
    Hi  ,.
    Once You go to SE95 Give the package name as  - J1I2 and Execute .
    If some Note has been applied for the package (Whcih Contains your FM) then it will show following nodes
    Note Corrections
    With Modification Assistant
    Without Modification Assistant
    Appends
    So you need to find under whcih node Your update for FM exits .It must be Visible in red .
    Now goto Menubar >>Goto >>Modification Adjustment .
    once you adjust ,the FM should become Editable .
    Regards,
    Rajesh

Maybe you are looking for