Unable to chose the Correlation name from Drop Down
Hi Experts,
I have a BPM in which I am have the following scenario.
1) I receive a message in BPM using a Rx step.
2) I send the message to some receiver with two Correlations(Say correlation1 and Correlation2) activated.
3) I get an acknowlegdement signal which uses Correlation1. This closes Correlation1.
4) Later I receive another Signal which will close the second correlation.
The problem is that I am unable to chose the Correlation2 in the drop down for Use Correlation in my step 4. Immediately after chosing the correlation and saving, it is resetting to space and giving an error in syntax check that Correlation is not done.
Can someone help me in this regard?
Regards,
Ravi Kanth Talagana
for single recv step its enough u use just a single correlation. u troubleshoot the error by inserting another recv step and desgin the ip accordingly. i hope in this case u wont have the eror triggered while activating
Similar Messages
-
Is there a way to stop the print screen from dropping down on top of the page to be printed. Can the print screen be moved? When the print screen drops down, it covers the page and the info needed to create the file. Thank you
You will find that this is application dependent. Most Apple applications such as Safari and Mail will use the "sheet" type of dialog boxes that you are referring. There is no way for the user to change that behavior. Other, non-Apple, applications like Firefox use a "modal" dialog box for printing etc. The modal boxes can be moved around so you can see the page behind.
-
Must select name from Drop Down menu
I have a form that has two drop down menus. One of the menus
asks the user to "Select A Name" from the lst. What is happening is
that the user simply ignores the list and goes to the next field.
Is there any way to require that the user slect a name, and not
simply have the default title "SELECT A NAME" appear in the
completed form response?
Any help would be appreciated.
Ted MillerHi Ted -
You didn't state which type of server-side scripting is
available to you in
order to process your forms; however, if your host supports
PHP, have a read
through my article. It explains the validation of what you're
looking for,
and even provides free code at the end:
http://www.avenuedesigners.com/blog/articles.php?ref=30
Feel free to leave a comment on it.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"imaging" <[email protected]> wrote in
message
news:e98902$krs$[email protected]..
>I have a form that has two drop down menus. One of the
menus asks the user
>to
> "Select A Name" from the lst. What is happening is that
the user simply
> ignores
> the list and goes to the next field. Is there any way to
require that the
> user
> slect a name, and not simply have the default title
"SELECT A NAME" appear
> in
> the completed form response?
>
> Any help would be appreciated.
>
> Ted Miller
> -
How do I get IE to drop the domain name from authentication responses
All,
I have a number of internal www servers that run various non MS operating systems which are not tied to the windows domain in any way. They are secure www sites and require authentication.
When I connect to one via IE on a domain joined workstation or server (ie 8 & 9) I am unable to authenticate because I can not remove the domain name from the authentication credentials that IE is passing back to the www server. I get an authentication
prompt for user name & password with the domain pre populated.
How the heck to I get IE to NOT pass the domain name as part of the authentication process. I've tried putting .\ in front of the user name but to no avail.
Thanks,
Steve D.As you can see below, when you first attempt the auth it defaults to you domain user account... in this case win\username.
When you select use another account, you get the following with no means to remove the domain name which causes auth failure as this www server isn't a domain member and doesn't use the domain for auth.
How do I get rid of Domain: .... ???
Thanks,
Steve D. -
Unable to capture data from drop down list in custom added field in migo tcode at item level
Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = '<SCREEN INPUT FIELD NAME>'
values = values[]
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
<inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected -
I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do
It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!! -
Hi Team,
I am trying to move the .pdf files from drop-off library to custom library.
For the above requirement i am writing content organizer rule condition like (On Group: Document content types & Type: Document)
Property: Name
Operator: Ends with
value: .pdf
and Setting value in target location like
/sites/MS/ProductGuides
How to solve the issue
If help appriciated
Regards,
DhayaHi Dhaya,
I created a Content Organizer rule like this:
When uploading a .pdf file to the Drop Off library, it is moved to the destination library immediately:
I suggest you create a similar rule as above for another test to see if the issue still persists.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
RICS0001:Internal Error,unable to process the collected data from the device.
Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
AlexWell known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).
-
Unable to get the employee name in performance Management
Hi All,
I am facing problem with Performance Management in My Employment. Unable to see the employee name in PM docs to approve by manager.But same user is able to see in Backend under manager who has to be approve..Please assist to go further. Is there anything need to be done from portal side.?
Thanks & Regards,
Kumar. V.Hello Sainth,
In Webi Prompts..you can see the "Key icon" click on that icon..it will show both text and key..it will helps you to run the report based on the Key..
Regards,
Naveen D -
This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)
-
Hide id from drop-down list at the top of the detail tab
Hello Nakisa experts!
I have one more question about Nakisa OrgChart 4.0 SP 1.
How can I hide position and org unti id from drop-down list at the top of detail tab, see picture below:
Thanks in advance.I'm not sure you're going to be able to change this. I think (but I'm afraid I don't know for sure) the section is defined by \WEB-INF\uitemaplates\com\nakisa\manager\omg\ui\subucs\sectionDesigners\DetailHistoryButtonSectionSubUC.xhtml, which after a quick search through the application looks as though it might be populated by a NakisaTrollBin.jar ... which isn't really something you should be looking to edit.
Nakisa do often write in various settings that can allow features to be tweaked and enabled/disabled. It could be that there's something you could add into SettingsResources to apply the change you require, but you would need to contact Nakisa about this as they don't document all of these options.
All this being said I would query why this is being done. It is not uncommon to say have multiple positions with the same name - e.g. HR Administrator might exist in several org units. If you are looking through several identically named org units or positions, the unique identifier is going to be the object's ID. As such it seems most logical to me to keep the ID in the history to allow a user to discern the difference between identically named positions/org units.
Regards,
Stephen. -
Hi
We are having trouble storing inventory scans from some workstations.
We have a windows ONLY environment, with middle tier servers. (ZEN65SP1,
W2KSP4).
Some workstations are storing fine. The Storer function is working and we
can see the storer functions for the 'good' workstations in the Inventory
service window.
However some workstations can't store to the inventory db, but DO populate
eDir ZENworks inventory 'minimal information' but show "Scanner(Warning) :
027: Unable to read the sequence number from the Workstation object." in
the Scan Status...
The Inventory service window shows no attempt by these workstations - it's
almost as though the scan file is not arriving (though eDir knows/displays
the scan file name)
How does the workstation access the scandir in Windows only/middle tier
environment? Does the scan xml stream get sent to the MT via http and then
on to the scandir via CIFS?
Any suggestions/explanations welcome!!
Many thanks
DavidDavid,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
027: Unable to read the sequence number from the Workstation object
Environment:
NW 6.5 sp4
Zen 6.5 sp1
We had a problem with our inventory server processing .STR files a couple
months ago - had to turn off inv. policies on workstations while we resolved
it. Now it's resolved and we're running inventory again. We have a large
number of workstations reporting this error:
027: Unable to read the sequence number from the Workstation object
They have no data in the DB, although they do have minimal scan info, and
the last scan status date matches that of the sequence number error.
I've seen this sporadically in the past and have been able to resolve it by
initiating a full scan on the individual workstation. However, that does
not seem to be making a difference this time.
Novell's troubleshooting document basically says see if the server's
running, and see if there's data for the workstation in the db. Then call
tech support.
Any other ideas?
~~~Nicoya...Jared wrote:
> Nicoya Helm,
>
>> 027: Unable to read the sequence number from the Workstation object
>
> I am thinking that this can also mean a previous full scan was not
> found. Or maybe the STR file name is bad.
>
> This information is stored here
> HKEY_LOCAL_MACHINE\Software\Novell\Workstation
> Manager\InvScanner\"STRFileName"
The machines I'm troubleshooting have valid formats for their STR names,
but that doesn't necessarily mean they are valid STR sequence numbers.
Does removing the value in the reg key cause the STR file name to be
recreated?
>
> Because imaging is used, it's possible that this information is matching
> on some machines which could cause problems.
I've verified that none of our images contain the c:\zenworks history
folder, and we run a script that cleans up any zenworks items before
sysprep (i.e. makes sure there's no registration info on the
workstations, etc). Our imaging scripts also clear any ZIS info to
avoid any duplication as well, so I don't think imaging would be causing
this.
> I believe 6x also has a hist.ini file like 3x inventory does, you might
> delete the file also.
Good tip about the hist.ini file, I didn't know about that. It does not
solve the sequence number error, but it does seem to force a full scan
of the system and cause the new scan to be stored in the DB, which was
not happening before.
Thanks! -
Itunes doesnt grab the track names from Cd's
It used to, but iTunes no longer gets the track names from a CD when I attemp to import. It recognizes the CD name, but not the individual songs. They show as "Track 01", "Track 02", etc... I then try to get "get track names for CD's" through iTunes and it says, "unable to connect to the CDDB server".
any help?iTunes actually does not get the track names from the CDs themselves. iTunes instead connects through the Internet to the Gracenote CDDB server and gets the album and track information from there. So when you import a CD, your system needs to be connected to the Internet. If it's not, that's your problem.
If it is connected to the Internet, check your firewall(s) to make sure that that the CDDB site (gracenote.com, at least) is allowed in the firewall settings.
For more information, look for "gracenote" or "CDDB" in the iTunes Help.
Hope this helps.
PowerMac G5 DP 2GHz Mac OS X (10.4.3) -
i use PC windows 7 i downloaded new version fire fox i cant print wireless to my hp printer it is set as default when i chose it from drop down it wont let me and it stays on the konica after down load new fire fox and chose disable option not compatible
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Maybe you are looking for
-
Project Management Roadblock with mac
I love my mac! I always have loved my macs. I mainly used my macs for personal which is mostly multimedia world. For the past 6 months I have kicked my work provided Dell to the curb and am using my mac for everything business related with some snags
-
Its been like that for hours. It's just an apple sign and a spinning wheel/ circle (not the pinwheel) I was updating mountain lion.
-
Several purchase-orders for one requisition
Hello, as I read in SAP/OSS Note 109143, it is not possible to create more than one purchase-order for a purchase-requisition, when the requisition comes from SD-order (Orders on Hand). We use Release R/3 4.6C. Are there possibilities in ERP 2004/200
-
Error in extended syntax check
HI all, I have declared some constants like this. constants: c_str1(20) value 'abcdefg,,,,,', c_str2(4) value 'xyz', c_str(30). concatenate c_str1 c_str2 into c_str. I am getting an error for c_str1 in extended syntax
-
Is it normal that Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation? I want to play music synced in my ATV 1st gen. to a nymber of speakers in the house. In the list of speakers I can see Apple