Unable to get the employee name in performance Management
Hi All,
I am facing problem with Performance Management in My Employment. Unable to see the employee name in PM docs to approve by manager.But same user is able to see in Backend under manager who has to be approve..Please assist to go further. Is there anything need to be done from portal side.?
Thanks & Regards,
Kumar. V.
Hello Sainth,
In Webi Prompts..you can see the "Key icon" click on that icon..it will show both text and key..it will helps you to run the report based on the Key..
Regards,
Naveen D
Similar Messages
-
One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically. -
Unable to get the response from dynamic partnerlink
Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
SrikanthHi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL. -
Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.
Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
KumarWilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar -
Why iam unable to get the valu from combobox
when i run this code
everytime iam getting blank alert
y iam unable to get the selected item from combo box
thank u
<%@ page import="java.util.Date"%>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%><%@page import="java.sql.*,java.util.*,java.text.*,java.util.ArrayList, java.util.List,org.joda.time.DateTimeConstants,org.joda.time.LocalDate,
org.joda.time.Weeks"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<TITLE>Reading Data From Text Fields</TITLE>
</HEAD><BODY onload=Datevalue()>
<form name="form1" action ="" method="post" onSubmit="update();">
<img src="nendrasys_logo.gif" align="right"></img>
<b><font color="669900"><h4 align="left">UserName:</font>
<jsp:useBean id="user" scope="session" class="nendrasys.User" />
<jsp:getProperty name="user" property= "name"/>
    
<b><font color="90be00"><h4 align="left">Designation:</font>
<jsp:getProperty name="user" property= "designation"/>
<br><font color="669900"><h4 align="right">Project:</font>
<select name="Projects">
<option>Project:1</option>
<option>Project:2</option>
<option>Project:3</option>
<option>Project:4</option>
<option>Project:5</option>
</select>
<%! String s; %>
<% DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd");
Date date = new Date();
//out.println(dateFormat.format(date));
s= dateFormat.format(date);
%>
<select name="Dates" sizes=1 id="dates" onchange="Datevalue(this.value)">
<script type="text/javascript">
<!--//
var begDate = new Date("10/01/2008");
var endDate = new Date();
var previousDate =new Date();
var presentDate =new Date("<%=s %>");
endDate.setDate(presentDate.getDate()+14);
begDate.setDate(begDate.getDate()+(6-begDate.getDay()));
while (begDate <= endDate) {
var datestring=[begDate.getDate(),(begDate.getMonth()+1),begDate.getFullYear()].join('/');
// var datestring=[begDate.getDate().padZero(2),(begDate.getMonth()+1).padZero(2),begDate.getFullYear()].join('/');
if(previousDate < presentDate && presentDate <= begDate )
document.writeln('<option selected>'+(datestring)+'</option>')}
else
document.writeln('<option>'+(datestring)+'</option>')};
previousDate.setDate(begDate.getDate());
previousDate.setMonth(begDate.getMonth());
previousDate.setYear(begDate.getYear());
begDate.setDate(begDate.getDate()+7);
document.writeln('</select>');
//-->
</script>
<br><br>
<TABLE BORDER="2" BORDERCOLOR="#336699" CELLPADDING="2" CELLSPACING="2" WIDTH="100%">
<TR>
<TD>   </TD>
<TD bgcolor="669900"><label id="sun"></label></TD>
<TD bgcolor="90be00"><label for="mon" id="Mon">Mon</label></TD>
<TD bgcolor="669900"><label for="tue" id="tue">Tue</label></TD>
<TD bgcolor="90be00"><label for="wed" id="wed">Wed</label></TD>
<TD bgcolor="669900"><label for="thu" id="thu">Thu</label></TD>
<TD bgcolor="90be00"><label for="fri" id="fri">Fri</label></TD>
<TD bgcolor="669900"><label for="sat" id="sat">Sat</label></TD>
<TD bgcolor="90be00"><label for="tot" id="tot">Total</label></TD>
</TR>
<tr>
<th>Project Work</th>
<td bgcolor="669900"><input type="text" name="c11" size="2" value="7" onBlur="javascript:document.frm.c12.value = document.frm.c11.value"></td>
<td bgcolor="90be00"><input type="text" name="c12" size="2" value="3"></td>
<td bgcolor="669900"><input type="text" name="c13" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c14" size="2"></td>
<td bgcolor="669900"><input type="text" name="c15" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c16" size="2"></td>
<td bgcolor="669900"><input type="text" name="c17" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c18" size="4"></td>
</tr>
<tr>
<th>Internal N/C</th>
<td bgcolor="669900"><input type="text" name="c21" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c22" size="2"></td>
<td bgcolor="669900"><input type="text" name="c23" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c24" size="2"></td>
<td bgcolor="669900"><input type="text" name="c25" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c26" size="2"></td>
<td bgcolor="669900"><input type="text" name="c27" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c28" size="4"></td>
</tr>
<tr>
<th>Public Holidays</th>
<td bgcolor="669900"><input type="text" name="c31" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c32" size="2"></td>
<td bgcolor="669900"><input type="text" name="c33" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c34" size="2"></td>
<td bgcolor="669900"><input type="text" name="c35" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c36" size="2" ></td>
<td bgcolor="669900"><input type="text" name="c37" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c38" size="4"></td>
</tr>
<tr>
<th>Holidays Taken</th>
<td bgcolor="669900"><input type="text" name="c41" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c42" size="2"></td>
<td bgcolor="669900"><input type="text" name="c43" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c44" size="2"></td>
<td bgcolor="669900"><input type="text" name="c45" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c46" size="2"></td>
<td bgcolor="669900"><input type="text" name="c47" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c48" size="4"></td>
</tr>
</TABLE>
<br>
<center><input type="submit" value="Submit" /> </center>
<%
String username = request.getParameter("userid");
String pwd = request.getParameter("pwd");
String connectionURL = "jdbc:mysql://localhost:3306/timestamp";
Connection connection = null;
Statement statement = null;
ResultSet rs = null;
String sql=null;
Class.forName("com.mysql.jdbc.Driver").newInstance();
connection = DriverManager.getConnection(connectionURL, "root","nendrasys");
statement = connection.createStatement();
//rs=statement.executeQuery(sql); %>
</form>
<SCRIPT language='Javascript'>
function update()
alert("ciaoooooo");
<%
try
String value=request.getParameter("c11");
String value1=request.getParameter("c12");
// if(value!=null)
// System.out.println(value);
// System.out.println(value1);
catch(NullPointerException n)
%>
</script>
<SCRIPT language='Javascript'>
function Datevalue(date)
// document.getElementById("dates").innerHTML=document.getElementById("sun").value;
alert(date);
// alert( document.getElementById("dates"))
<% System.out.println("bye");%>
</SCRIPT>
</BODY>
</HTML>You mixed Java and Javascript in the expectation that they runs simultaneously.
You are Wrong.
You need to distinguish between the server side languages and client side languages. Java/JSP runs at the server side and produces a HTML page with other client side stuff in it like CSS and Javascript. When the HTML page is finished, it will be sent to the client and then Java/JSP stops. Once the HTML page is arrived at the client, there is no one line Java code in it, only its output/result. Do a View Source in your favourite web browser to see it. Only from that moment on, Javascript runs and/or can be invoked.
Whenever you want to use Java variables in Javascript, you need to print them out as a Javascript variable. Whenever you want to use Javascript variables in Java, you need to invoke a request to the server and pass them as parameters. The request can be either synchronous (a link or a form submit) or asynchronous (ajaxical). -
How to get the folder name of selected subitem in tree structure?
Hi All,
I created a tree structure like below.
->Folder1-- 1
2
3
->Folder2-----1
2
3
i.e i have two folders & each folder having the values like above.Now i want to perform some action by clicking on the any of the values.Suppose if i click value 2,i want to do some action.the actions need to perform is varies from floder to to folder.
So How can i get the folder name of clicked Value?
Regards,
RaviHi Kumar ,
the below code should help you.
Register the below action for the leaf node for which u need the subfolder's name above it.
Worked fine in my system ...hope it does in ur scenario too
method ONACTIONGET_PATH .
data : lr_element TYPE REF TO if_wd_context_element,
lr_node TYPE REF TO if_wd_context_node,
ls_path type string,
ls_path_node TYPE string,
lt_string type TABLE OF string,
l_lines type i,
l_lines_1 TYPE i.
lr_element = wdevent->get_context_element( 'CONTEXT_ELEMENT' ).
**-> getting the path of the node/leaf
*which u had clicked and from that getting the node above it
ls_path = lr_element->get_path( ).
SPLIT ls_path at '.' into table lt_string.
-> remove the first 2 entries as they will contain the view name
DELETE lt_string FROM 1 to 2.
l_lines = LINES( lt_String ).
l_lines_1 = l_lines - 1.
-> remove the last 2 entries as they will contain the element in the path
DELETE lt_string from l_lines_1 to l_lines.
LOOP AT lt_string into ls_path.
CONCATENATE LINES OF LT_STRING into ls_path_node SEPARATED BY '.'.
ENDLOOP.
**-> getting access to the node above the leaf element
LR_NODE = WD_CONTEXT->PATH_GET_NODE( path = ls_path_node ).
lr_element = lr_node->get_element( ).
**-> Getting the name of the folder...
*here path is the attribute in my context which stores the name of the folder
lr_element->get_attribute( EXPORTING name = 'PATH' IMPORTING value = ls_path ).
endmethod. -
Unable to get the Text proerty of Range class
Hi,
I am using the Text property of Range class for excel template development using VSTO.While reloading the template i am getting the error "Unable to get the Text proerty of Range class".If i skip this line of code,i am getting similar kind of errors while accessing the properties of Range class(like Range.copy() ,Range.Locked, Range.EntireRow.Hidden).In all these cases i am getting the similar kind of error "unable to get the property of Range Class".
Waiting for a quick response...
Thanks in advance..Hi Besse,
Actully, the error is coming when i try to populate datatable with the the range values in one of the sheet.
I am using the below code.
//"wsInteropMetadata" is the sheet object.
//"RangeName" is the range name in the sheet.
rngConfig = wsInteropMetadata.get_Range("RangeName", Type.Missing);
for (int iRow = 1; iRow <= iRowCnt; iRow++)
dRNew = dTMetadataTable.NewRow();
for (int iCol = 1; iCol <= iColCnt; iCol++)
rngCell = (Excel.Range)rngConfig.Cells[iRow, iCol];
dRNew[iCol - 1] = rngCell.Text.ToString();
dTMetadataTable.Rows.Add(dRNew);
In the first load of the template,this code is working fine.In the reload i am getting the error at "rngCell.Text".If i see in quickwatch,most of the properties of "rngCell" object are throwing "System.Runtime.InteropServices.COMException".See the below exception information.
Exception Information
Exception Type: System.Runtime.InteropServices.COMException
Message: Unable to get the Text property of the Range class
Source: Microsoft Office Excel
ErrorCode: -2146827284
Thanks
Krishna. -
Unable to get the AppsLocalLogin.jsp page
Hi,
We are on oracle Db 11.2.0.2 and EBS : 11.5.10.2 on Solaris Sparc 64 Bit 5.10.
We have recently added a web node to an existing setup.
Although Apache services are up , but we are unable to get the AppsLocalLogin.jsp page.
Replacing the domain name and Ip in line 4 with HOSTNAME.DOMAIN_NAME/IPADDRESS
We have found the below error in the Jserv log :
[12/04/2012 20:09:38:868 IST] <info> ApacheJServ/1.1.2 is starting...
[12/04/2012 20:09:38:868 IST] <debug> using confFile /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties
[12/04/2012 20:09:39:016 IST] <info> Connection authentication enabled
[12/04/2012 20:09:39:045 IST] <info> Connection allowed from HOSTNAME.DOMAIN_NAME/IPADDRESS
[12/04/2012 20:09:39:045 IST] <info> Connection allowed from /127.0.0.1
[12/04/2012 20:09:39:046 IST] <debug> port 16000 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16001 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16002 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16003 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16004 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16005 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16006 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16007 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16008 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> port 16009 is specified in properties file
[12/04/2012 20:09:39:046 IST] <debug> try to start on port 16000
[12/04/2012 20:09:39:050 IST] <debug> try to start on port 16001
[12/04/2012 20:09:39:050 IST] <debug> cannot create socket on 16000
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16001
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16002
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16002
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16003
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16003
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16004
[12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16004
[12/04/2012 20:09:39:051 IST] <debug> try to start on port 16005
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16005
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16006
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16006
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16007
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16007
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16008
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16008
[12/04/2012 20:09:39:052 IST] <debug> try to start on port 16009
[12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16009
ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.
[12/04/2012 20:09:39:053 IST] <critical> ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.The IP of this web node is different from the IP mentioned in the log, at line 4.
Regards
KKHi;
ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.Please check your port is avaliable or not also check related path
Regard
Helios -
How to get the VARIANT name in the program
Hi Guys,
Can somebody tell me how to get the VARIANT name in a program.
I have to perform some code with specific variant only. So I want to check in program which variant has been used to call the program.
Thanks,Hi,
Variants are stored in table VARI and VARID.
You can use RS_ALL_VARIANTS_4_1_REPORT to get all the variants for a report program.
please check out the link below it will be helpful to you
Re: Programs for a transaction variant
Hope this helps.
ashish -
Get the variant name of the job shceduled in the Background
Hello All,
I am shcduling printout of the Payment Document from F110 transaction code in background.
My requirement is to get the variant name.
F110 create background job for printing and when i debug it the value of sy-SLSET it is coming some
junk value like &000000012.
I can not schedule this job from SM36. I have to go for F110 only.
Is there any way to get the variant name of the background job.
Kindly help.
Regards
SachinHi,
I am running F110 by maintaning three variant at the same time.
So my program will run three times for these three variant.
Depending upon the variant i have to perform some validations.
So I want to know the variant name for each one run.
I am maitaing the variant but when i checked the system field sy-SLSET it is coming some junk value '&000000013'.
How to get the variant name from this.
Regards
Sachin Yadav -
Urgent:::how to get the employee hierarchy
hi all.
let me know how to get the employee hierarchy in HR organizational management.
like when we give emp id it shows developer name---superior( team lead name)-superior(project lead name)---
points will be rewarded for valuable answer.Hi,
1) You can use the relation '002' in the table HRP1001, between the position of developer (objid) and get the position of team lead (sobid field). With the position of the team lead got in SOBID field... with the relation '008' get the person name.
2) You can use the transaction PPOM_OLD to view the reporting structure...
Regards,
Meera -
Unable to get the Approve option in Salary form
hi friends,
we are implementing payroll using UAE localisation, when i try to add new salary for an employee i am unable to get the approve option in the salary form..we are working on version 11.5.10.2..i have the given the setup steps below
HRMS Responsibility>People>assignment>salary >add New Salary..
I have attached the function the" Salary Approval" to the menu also..even we have bounsed the apache server also...still we face the same problem we are unable toget the approve option still we can see only the proposed optionand we are unable to enter the new salary for the employees...
Pleae advise your better openions to over come this..
Thanks and Regards
RajHi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna -
I had no problem connecting to my network and now all of a sudden I can't connect my iPad. Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss. Anyone else have that problem? I've gone thru all my settings and can't seem to find a way to log into my network. Don't get the option to put in my password. It just give me the name of my network and option of dismiss instead of password.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Photoshop elements 12 Unable to get the sharing (email) to work.
Hi, The sharing (emailing) feature talks about using other email client but can not??? I have Outlook 2013. the other option is to use the adobe email service that needs to verify the email that I am using but does not send the verification code that I need to activate the feature. I have Windows 8. Elements Organizer 12.0.0.0
Core Version: 12.0 (20130903.r.43239)
Language Version: 12.0 (20130903.r.43239)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
Catalog Size: 43.1MB
Catalog Cache Size: 187.1MB
System:
Operating System Name: Windows 8
Operating System Version: 6.2
System Architecture: Intel CPU Family:6 Model:5 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 7.9GB
Free Memory: 4.5GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 11.0
Adobe Acrobat Version: Not installed
CD and DVD drives:
D: (MATSHITA DVD+-RW BUS: 2 ID: 2 Firmware: UJ8E2)Thank you very much.
AL
From: Bill Hunt [email protected]
Sent: Tuesday, January 28, 2014 2:22 PM
To: aladvantage
Subject: Photoshop elements 12 Unable to get the
sharing (email) to work.
Re: Photoshop elements 12 Unable to get the sharing (email) to work.
created by Bill Hunt <http://forums.adobe.com/people/the_wine_snob> in
*Premiere
Elements* - View the full
discussion<http://forums.adobe.com/message/6061690#6061690 -
How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox
How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.
The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ
Maybe you are looking for
-
Link from Accounting Doc Number to PO
Hi, In FBL3n certain doc types PO number is not updating.Using assignmnets i want to update the field for these kind of doc no. My doubt is from FI doc number how can i link it to the PO number. Eg:i have an FI doc number say 51000000 which has two l
-
Some SAP R/3 Tables are Missing
Hi Friends, I made a connection between SAP R/3 and Crystal Reports. When I am trying to see the tables of SAP R/3 I am not able to see all the tables only few tables are visible. For example in Standard table I am able to see only LIKP table, but
-
Why won't text and graphics line up in adobe premiere?
Hey, I have been out of the editing thing for about 8 years now. I recently needed to make a video for another business I run. Anway, I am using animated / still graphics and the basic text titles that come with premiere. I see that the graphics line
-
hi posted a similar question before but still having probs. when painting with interpolation is there any way to make a stroke last a certain nummber of frames without unecessary animation? say I am painting out some disfiguration - a small area of t
-
Reinstalling should I install 8.5 and 8.6 or just 8.6?
A recent hard drive crash has forced me to reinstall everything from scratch. So far I have installed: LV 5.11 because still I have to maintain a huge LV 5.11 code base LV 8.21 because 8.5 and higher will not open 5.11 code directly so I have to open