Unable to clone zone on solaris11 (MAC address is already in use )

I have an x86 box running solaris11_FCS which I want to use for cloning zones. I have a 'gold' zone with my exact setup (mysql/tomcat + java application) and I want to be able to clone this so that I can preserve the 'gold' zone and mess around with the clones knowing I can recreate them at will
I created 2 vnics (one for my gold zone and one for a new clone)
root>dladm create-vnic -l net0 vnic1
root>dladm create-vnic -l net0 vnic2
root>dladm show-vnic
LINK OVER SPEED MACADDRESS MACADDRTYPE VID
vnic1 net0 1000 2:8:20:78:4f:ba random 0
vnic2 net0 1000 2:8:20:6f:87:53 random 0
// Here is the configuration of my gold zone (created and up&running)
root>zonecfg -z gold-z1 export
create -b
set zonepath=/zones/gold-z1
set brand=solaris
set autoboot=true
set ip-type=exclusive
add anet
set linkname=net0
set lower-link=auto
set configure-allowed-address=false
set link-protection=mac-nospoof
set mac-address=2:8:20:18:e1:98
end
//I have created the clone as follows :-
root>zonecfg -z gold-z1 export -f /zones/new-z2-profile
// I have edited 'new-z2-profile' to make approp adjustments
// here is the configuration of the clone
root>zonecfg -z new-z2 export
create -b
set zonepath=/zones/new-z2
set brand=solaris
set autoboot=true
set ip-type=exclusive
add anet
set linkname=net0
set lower-link=auto
set configure-allowed-address=false
set link-protection=mac-nospoof
set mac-address=2:8:20:6f:87:53
end
root>
// I created "/zones/new-z2-template.xml" using "sysconfig create-profile" command on gold-z1
root>zonecfg -z new-z2 -f /zones/new-z2-profile
root>zoneadm -z new-z2 clone -c /zones/new-z2-template.xml gold-z1
/// when I try and boot the clone, I get an error
root>zoneadm -z new-z2 boot
zone 'new-z2': failed to create vnic for vnic1: MAC address is already in use
zoneadm: zone 'new-z2': call to zoneadmd failed
root>
what does this error mean? The 2 vnics have different MAC addresses (see output from dladm above) ??
Also - how can I take the image from my 'gold' zone and install a zone on a separate machine from that image?

See if this helps:
iOS: FaceTime is 'Unable to verify email because it is in use'

Similar Messages

  • This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

    My current Apple ID, for which all of my content has been downoaded (e.g., music, apps) is associated with a work email address that I will no longer have access to in the near future.  In my Apple ID account, I noticed I had two alternate emails listed, one is my .me account and the other is my .gmail account.  I use my .gmail account, and it is the primary email I use with friends and family.  I noticed both were not verified, and when I tried to, it said they were both associated with other accounts.  I was able to log into a separate Apple ID account I must have set up at tone point with my .gmail, and I changed the email address to a new one I created.  I also deleted the gmail account from any other Apple-relted account I could think of.  I am still gettgin the same error message when I try to add it to my current Apple ID: "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
    My concern is this: with FaceTime and now iMessage, it seems more important than ever that I am able to use my correct email address.  With iOS5 beta, I cannot enter either my .gmail or.me accounts under "You can be reached for messages at:" as I get an error stating: Unable to verify email because it is already in use."
    How can I remedy this issue and assign my .gmail account to my Apple ID?

    Re: Cant verify Apple ID
    created by kelly218 in iTunes Store - View the full discussion
    I just spoke with a technician at Apple.  I hsven't been able to verify because the wife has the phone.  but he said all that you need to do is:
    1) Go to Settings --> iTunes Store and login with your Apple ID and pwd
    2) Go to Settings --> iCloud and login with your Apple ID and pwd
    seems that the phone requires you to login to the store first...

  • Trying to set up Firefox Sync and it says my email address is already in use, but won't let me sign in.

    I'm trying to Sync Firefox between my new Android phone with my Macbook Air. It tells me I need to create an account, but says my email address is already in use. So I try to put in the codes in the three boxes, and it leads me back to set up a new account. How can I reset this? How do I proceed?
    Thank you for your help!

    Reset your password
    *https://account.services.mozilla.com/forgot
    *https://support.mozilla.org/en-US/kb/ive-lost-my-firefox-sync-account-information
    How do I manage my Firefox Sync account?
    *https://support.mozilla.org/en-US/kb/how-do-i-manage-my-firefox-sync-account

  • After finally getting my imac from fedex,  cannot get past the Update Apple ID and to use ICloud I have to change my app  id.  okay, but the red keeps saying that email address is already being used.  is it because I am on the apple site on a netbook pc?

    On the Update Apple ID screen to use ICloud, I get a red message that email address is already being used.  It does not accept my email address?  I do not understand what the screen is asking me.  Is this because I am using the apple ID on a netbook for this note or what. 
    Is there a way to bypass this screen if I don't want to use ICloud?  I don't want to screw up the original setup of my imac.  If I could get to the desktop, then I would know what OS and programs are in my machine. 

    Hi, hopefully you've called Apple on this... you have 90 days free phone support.

  • When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

    When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

    Me too. I try to verify and i get the same message.
    I've created 3 alternate e-mail addresses and tried creating new accounts.
    Same Result!
    This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

  • New ipad3, just getting started, trying to get on facetime but when I try to set up a message appears saying my email address is already in use. I am now stuck and I can't get any further! Help please!

    New ipad3,just getting started,trying to get on FaceTime but when I try to set up a message appears saying my email address is already in use. I can not get any further, help please

    Millietrixie-
    Are you trying to call yourself to test FaceTime?  If so, you must have a second E-Mail address registered with your Apple ID.  In other words, there must be a different E-Mail address on each unit.
    Fred

  • When I try and log into imessages, I get a message that says my email address is already in use

    When I try and log into imessages, I get a message that says my email address is already in use. What do I do?

    Yo,
    If u use [email protected] to log in (ur apple id) then u have to use a different one like [email protected]
    Mark this as helped if it does... thx

  • Ref:How to find the IP address is already in USE

    I am trying to install the Oracle 10g RAC - 2 Node. When I am running vipca I am getting CRS-1006 saying that IP is already in use in the network. The vip IP address is giving issues. It is successfully installed the Cluster software and Database Software but It could not start the or create the LISTENER_. My question is how can we find that an IP address is already in use. so that we can give other IP address.
    Thanks in advance.

    Check both nodes:
    [root@vmractest1 ~]# nslookup <VIP address>
    to reconfirm which host machine is already using this.
    disable the adress
    [root@vmractest1 ~]# ifconfig -a | grep 10.4.10.46
    [root@vmractest1 ~]# ifconfig -a | grep 10.4.10.47
    check destination is unreachable
    [root@vmractest1 ~]# ping 10.4.10.46
    [root@vmractest1 ~]# ping 10.4.10.47
    Edited by: mmusette on Apr 6, 2009 4:45 PM

  • I cant access my account as I tunes says no one with my e-mail address exists. If I try to create a new account with my e-mail address, I am told this address is already in use?

    I have had an account for some time. I tried to log on yesterday to be told my credetials were wrong. I tried to reset my password but get 'your session timed out' message after less than 30 seconds! (happened 4 times). I then tried to access my account with my e-mail address. I am tols that there is no account with thaqt e-mail address, but if I try to create a new account with my e-mail address, I am told that address is already in use. To get to this community page I have had to create a new account with a new gmail address. I want to get to my main account as I have credit on that one. Please help?
    gerryfrom hatfield.

    Hello gerryfromhatfield,
    There is a process, an article about how to find your apple id and get access to it. It is named Apple ID: Finding your Apple ID found here: http://support.apple.com/kb/HT5625?viewlocale=en_US
    You start at the top, and work your way down.
    If you can't remember your Apple ID, you can find it by using the password retrieval process at My Apple ID. Follow these steps to recover your Apple ID name:
    Go to My Apple ID and click "Find your Apple ID."
    Complete all the required fields that might be associated with your Apple ID.
    Note: If multiple email addresses have an Apple ID, select your current or most recently used email address.
    All the best,
    Sterling

  • When I try to sync my mobile browser to my computer browser, It says my E-mail address is already in use. Then when I tried to sign in under that E-mail addres

    When I try to sync my mobile browser to my computer browser, It says my E-mail address is already in use. Then when I tried to sign in under that E-mail address, it says the password or user name is incorrect. I already reset the password and tried again, still with no success.

    If you are trying to '''add a new device''' to your Sync account, see this: <br />
    https://support.mozilla.org/en-US/kb/add-a-device-to-firefox-sync
    '''Pair a Device''' is usually the best way of adding a mobile device to a Firefox account.

  • I am trying to set up an account to use eprint but it says my email address is already being used. H

    i am trying to set up an eprint account and to do so i need to give an email address, having done so i am being told my email address is already being used. i cannot add another address as i do not have one. help

    Hi priceg924;
    I hope you are having a great day and sorry to learn that you are having this issue.
    Let's try this -
    To help you better I will need to know the following;  What printer do you have? Please include complete printel model.
    It may help later if you let me know what (OS) Operating system you are using.
    For a very complete list of troubleshooting steps in regards Eprint go to this article Click here.
    Before you try any troubleshooting steps do the following;  
    - Erase all cookies and browsing history.
    - Do not include signatures in your email.
    - Restart the computer.
    I will also take the following general steps to ensure that this is not creating an issue.
    - Set an Static IP address to the printer. Depending on your printer model will be the procedure to do this.
    - Use Google public DNS servers which are 8.8.8.8 and alternate Server is 8.8.4.4 the way you set this is
    Also this is what I heard from other members of the forum.
    I heard here (other members of the community) that there is an issue that engineer are working on diligently that may be affecting this particular process. At the same time I know that other members have some success using this steps aforementioned.
    Hope this helps and let me know if I can help you in any other way;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • SP5100 TCO timer: mmio address 0xbafe00 already in use

    RE:  https://bbs.archlinux.org/viewtopic.php?id=125482
    It seems to be back and I see no current references.  *sigh*.
    The fix suggested here:
    http://bugs.debian.org/cgi-bin/bugrepor … =638863#35
    has been applied to the kernel sources, but I've got the
    (approximate) same symptom anyway:
    [    5.530004] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [    5.530054] SP5100 TCO timer: mmio address 0xbafe00 already in use
    these messages are followed by a long delay and then a boot.
    I've reported it to Debian, but last time it was first reported in 2009
    and fixed in 2012.  I'm hoping for a nearer term hackaround.
    Suggestions, please?  Thank you in advance!
    -- System Information:
    Debian Release: 7.1
      APT prefers stable-updates
      APT policy: (500, 'stable-updates'), (500, 'stable')
    Architecture: amd64 (x86_64)
    Foreign Architectures: i386
    Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
    Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)
    Shell: /bin/sh linked to /bin/bash

    I have the answer:  kernel 3.6 (3.5 actually).

  • T61s, T60s & older model unable to PXE boot to SCCM (MAC address problem)

    Hi, 
    We have a series of T60, T61 & older machines that are unable to PXE boot to SCCM. The T400 & X series & other newer models can boot just fine. 
    After checking further, we realised that only a certain range of MAC addresses are unable to pxe boot i.e 
    00-1A-XXXXXXX
    00-1C-XXXXXXX 
    range.. all the other range of MAC addresses are fine to boot via network. 
    The error when doing network boot  is "bad or missing discovery server list" 
    Also, we are running on SCCM 2012 at the moment. Our branch office who is running SCCM 2008 can have all the machines - regardless of models & brand boot just fine. 
    Any ideas?  Much appreciated. 

    did it obtain IP address from DHCP server? is DNS server address is configured in DHCP scope? can you ping using IP address?
    if drivers are proper will suggest to update it in boot media & enable command line support to make it easy for deployment & troubleshooting.
    Prashant Patil

  • How do I clone my computer's MAC address on to the AE base station?

    This is just driving me nuts. I've looked at responses to this question on the internet, and it appears that the Airport Extreme Base Station can't perform a function that nearly all WAN home routers have been able to perform for a decade: "cloning" a MAC Address. My internet provider uses the MAC address of one of my computers to identify a valid connection, and my old Belkin router just cloned the computer's MAC address. If the AEBS can't do that then it's a rather serious design flaw, and if I'd known that I'd never have bought the device. I noticed that there's something called a "Client ID" so I input my computer's MAC Address for that, but the Base Station still can't connect to the internet.
    I don't want to have my ISP reset my valid MAC address (even if they could, which isn't clear to me) because I may need to connect to the internet directly in the event of problems... say the Base Station malfunctions.
    I bought the base station so that I could connect peripherals to it, but if it can't connect to the internet that renders it practically useless.
    Are there any workarounds? Anyone have any ideas?

    I can see that no one is bothering to respond to this question, so I thought I'd post a resolution. I don't know if one can alter the ID of the AE Base by cloning a computer's MAC address. The next best thing would be to easily alter the MAC address that the ISP identifies as legitimate. If you have COMCAST's telephone modem (which has a battery backup so that it can't be rebooted by simply unplugging it) you can adopt the following procedure to reset the MAC address.
    1. Reset the base station, by depressing the reset button in back with a pen or paper clip.
    2. Unplug the base station.
    3. Reset the Comcast cable modem, by depressing the reset button in the back with a pen or paper clip.
    4. Plug the base station back in.
    5. Use the Airport Utility to set the parameters of Airport Extreme.
    This procedure will force COMCAST to recognize the Base Station MAC Address as legitimate for provisioning.
    It's not an ideal solution, but it works. If the Base Station fails and you have to use a direct connection to your computer you can follow a similar procedure to reset the modem, and recognize a new MAC address.
    Again, the fact that you can't use the Base-connected drives for Time Machine is just plain dumb. Apple originally touted this as one of their main selling points, and then just backtracked. They need to reintroduce this functionality in the next update of Leopard... and it wouldn't hurt to issue an apology for having misled people. The stone wall just ****** people off, as it should.

  • How to get MAC ADDRESS in mais.asc using FMS

    Hello,
    i need to get the Mac Address of every machine connected to my fms, is that possible with FMS?
    THX

    It's also available in System Information, under the Network section.
    Hold down option and select System Information from the Apple menu.
    Select Network, then the particular service type: Airport, Ethernet, Firewire
    Scroll down till you see MAC Address:
    You can also reveal it in the Terminal with ifconfig. en0 is usually ethernet, en1 is Airport, but that depends on your configuration.

Maybe you are looking for