Unable to confirm order

hi gurus
I created production order of 5 nos for one material. Here 2 are scrap and 3 are yield. but when I am trying to do final confirmation. System saying that under delivery is not allowed.( We set that configuration to show error). ie system is not not considering scrap quantity
How I have to make sure it is confirmed.
Thanks in advance
kalyan

Hi Kalyan,
Check your confirmation parameters settings in IMG. IN that setting in underdelivery allowance check you can define either error or warning.
Alternately you can also maintain underdelivery tolerance in Material Master Work Scheduling view or itself in Goods Receipt tab in Production Order.
These setting will help you to confirm the order with underdelivery.
Regards,
Sachin

Similar Messages

Unable to confirm transfer order due to error message "enter a storage unit

Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva

Unable to confirm TO with HU

Hi Gurus,
We are unable to confirm the Transfer orders for deliveries . If we are trying to confirm the transfer order we
getting the following error message " Message no. L3858 Material quantity in source HU is not sufficient for TO item".
I have created a HU before confirming the TO and after creating the HU, i am getting the above error.
Please kindly help us in this regard.
Regards,
tc.

Hi Sekkhar,
Just to share the solution in the comunity.
The problem in your case was that the HU records had a batch number maintained on the VEPO (HU Item level) record while the LQUA (Quant table) record doesn't. In MM also there is no batch value maintained. The VEPO record should be updated to remove the CHARG value. The material is not batch managed.
Then SAP repaired the data in order to allow the operation.
Please close this message as per the solution was provided and information were shared.
Best Regards,
Christian Rosa

Report for mass interruption of partially confirmed orders in PPDS?

Hi gurus,
our client has a lot of partially confirmed orders in the past, and this is giving us problems with the optimizer.
Is there a report for mass interruption of this orders?
We can do it one by one in the DS planning board, but there are too many!
would appreciate any help,
Pablo

Hi Pablo,
I would suggest you can close the partially confirmed orders at R/3 itself
so that it will update in APO via CIF.
There is delivery complete indicator in R/3 production/process order which
upon checking will close the order.
Regards
R. Senthil Mareeswaran.

Restrict confirmation order type wise

Hi group,
Requirement is we have more than one order type in a same plant for different departments.
The order type which is for department -1 ,should not have the authorisation for confirming orders of department -2.
Is there any setting so that, based on order type i can create a new profile in single screen entry and assign that profile in the role of that Particular department .
Regards,
SG

Dear,
For PP Order Type object -: C_AFKO_AWA & C_AFKO_AWK
or use the User Exit
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
Regards,
R.Brahmankar

Confirmed orders in ERP gets status "Deallocated" in PPDS

Dear APO experts.
It seems like it is standard setup that when process orders are partially confirmed in ERP they become the status "deallocated" in APO PPDS. Is it possible not to get that status? The problem is when the planners do their rescheduling next morning, the following orders are scheduled parallel to the partially confirmed order. We do not want that behaviour. We want the partially confirmed order to be planned sequentially with the following process orders.
Please advice.

Hi,
Yes It is standarad behaviour.
Please check whether SAP Note 793626 and related notes are applicable or not .
By implementing above note you may avoid deallocation of process order post partial confirmation
Regards,
Santosh

Unable to Place Orders

For the past couple of months, I have been unable to place orders on Bestbuy.com when using only giftcards. I have tried clearing my cache and using different computers, but the problem still persists. The orders go through if part of the order is paid through Paypal, but there is no option to only pay with part of a gift card and leave a small amount to pay through another method. Is this a sitewide problem, or is it specific to my account?

Hi there UNC5052-
Wow, that definitely sounds frustrating! I can certainly understand why you would be disappointed and confused as to why your orders made with Best Buy gift cards are not going through.
I did some testing and you should be able to pay partially by gift card as well as utilizing a credit card, PayPal or My Best Buy certificates. My cart allowed me this option after adding a gift card to the payment. What I would recommend is to try the following:
1.       Make sure that you are using the most updated version of your internet browser.
2.       Try a different internet browser if you haven’t already done so.
3.       You can also call us at 1-888-237-8289 and have an agent help you complete the order over the phone.
Is the order not letting you move forward when you use all gift cards or are the orders being cancelled once placed? Any additional information about what you are seeing would be helpful!
Thanks,
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

How to create 'service confirm order' through bapi?

I want to create service confirm order,
pls help me some bapi

Yudomg
Try this BAPI: <b>BAPI_BUSPROCESSND_CREATEMULTI</b>
Thanks
Jack
<b>Allot points if mys post helps !!!!!</b>

Attach binary data to Confirmation Order

Hi all,
I tried to attach a document, to an Confirmation Order. But when attching binary data using method "create_with_table" of Class cl_crm_documents, it provides me error:
Error: E030(SKWF_SDOKERRS):Characteristic of class '&1' is not valid.
Does anyone have an idea?
Best Regards,
Hemendra

Resolved at my end

Classification or class to batch in confirmation order

hi
how to assign classification or class to batch in confirmation order if its not getting automatically
thanking you

Hello,
Characteristics are assigned to classes,Classes are in turn assigned to material master classification type.
Assigning batches to Production order is done by the below link:
http://help.sap.com/saphelp_sbo88/helpdata/en/6b/509e741cdd4b36857ac330fb85327d/frameset.htm
Then once you have production order you can confirm the same.
Hope the information was useful
Regards,
Swetha

Unable to get order conformations

hi
In MI2.5 SP9 client, MAM application i could get notification numbers in the device but unable to get orders to the device can any one help me out with this problem
with regards
sid

Hi,
Ordering the column first takes place from the Data Model Itself.
Please Check your column ordering in the report data model. If it is not ordered in a right way then Rearrange it.
Remove your order by in query...
If any issues... let me know
Regards,
Soofi

Unable to confirm process orders

Hi,
I am getting an error - No open operations requiring confirmations exist for the order.
In the control key, I have selected 2 (confirmation required) in the confirmations indicator.
In the confirmation parameters, I have + confirmable operations checkbox ticked.
Are there any settings I have missed? I appreciate your help.

Hi
Please go and check operation
u have to add operation in order
do u have recipe for material in order
Please tell me if u face any problem
please reward points
Sunil

Unable to confirm quantity on the sales order --- Product allocation issue

The following configuration steps were completed in the APO system.
1.     Maintain Product allocation object
2.     Maintain Product allocation group
3.     Maintain Product allocation procedure
4.     Create planning object structure with the necessary characteristics
5.     Maintain characteristic combination
6.     Create Planning area with necessary key figures
7.     Create Planning book and data view
8.     Maintain connection to planning area
9.     Generate Product allocation group objects
10.     Generate characteristic combination from planning area
11.     Allocate the stock for the CVC combination
12.                 Assigned the product allocation group to the APO product
Regardless of quantity in the planning book, it is confirming all the quantity on the ECC sales order. This is due to the material availability date being pushed out to 12/31/2011 which seems to be the last date of the planning area time series. The values on the planning book were maintained online (manual step).
Also when I run the simulation of product allocation under GATP>Reporting>Product allocation,
For the product allocation group and the combinations that I have, I get the message "No allocations defined for the current characteristic combination"
Any help would be greatly appreciated.
Thanks
Ashwin

Dear Ashwin,
I would recommend to use the transaction /SAPAPO/ATPQ_CHKUSG. Enter the PAL group and do the following:
First: run the transaction with the 3rd option. Select all assignments found by the report then press the button delete with incoming order qty -> this deletes all assignments without any order number
Second: run the transaction again with the 1st option. Select all entries. press the button "merge PAL assignments", press button execute, choose on the first popup "yes" and on the second popup "no" -> this should correct the shortages.
Check the note 676128 to get further information about the //ATPQ_CHKUSG and the options.
I hope this helps.
Regards,
Tibor

ATG10.1 - Unable to confirm an order with Order Discount type promotion

Hi,
I have created a promotion in ATG10.1. The promotion is an Order Discount type and i have configured a %off on the offer. Starting ATG10 we need to choose a template for configuring the promotion and then apply the rules and offer on it. I chose the Advanced condition and offer template and configured the rules and the offer.
Our requirement is to access the discountType property of the promotion applied on the order in a processor that gets executed in the processOrder pipeline. We have additional business logic in the processor depending on the discountType offered in the promotion. When we try to access the property we get an illegal argument exception. This is because the promotion that is being created is of super-type Order Discount whereas the discountType property is at the sub-type level.
We are accessing the property as below.
List<PricingAdjustment> pricingAdjustments = pOrder.getPriceInfo().getAdjustments();
for (PricingAdjustment pricingAdjustment : pricingAdjustments) {
RepositoryItem promotion = pricingAdjustment.getPricingModel();
String discountType = promotion.getPropertyValue("discountType");
Exception:
java.lang.IllegalArgumentException: Attempt to get a property value named discountType from item-descriptor type Order Discount
Any pointers or suggestions to fix this error would be helpful.
Thanks,
Srikanth

Yes, you are correct that discountType is defined at sub-type level. But if there is an entry in sub-type level, there is also an entry in the main "promotion" item-descriptor. PricingModel is nothing but main promotion repository item.
From the promotion ( pricingModel) repositoryItem, get the type ( type is a property defined at super level which says if this item is of type order discount, item dsicount or shipping discount. This type is not discountType ). Once you get the type value, call catalogRepository for that sub-type of promotion to get sub-type's repository item which contains the actual discountType.
From ATG 10 onwards, merchandising UI changed completely and sub types are not present. Templates are just for merchandising UI. But that should not effect your piece of code in the pipeline processors in processOrder pipeline chain. If you look at my above pseudo code, im getting the type, then querying catalog repository to get the sub-type repository item and then getting the discountType.
-karthik

Re: Unable to check order status

I am having this exact same problem. I didn't register until now because I figured I could track the package based off of my information.
Also I am sure I used this email address and I even remember double checking it to make sure I didn't misspell. I never got an email confirmation of the order with any info for it, but I did receive a text telling me that it shipped with a number to track it. But just like OP, it says my phone number is wrong. How can it be wrong if I'm receiving the text?
Solved!
Go to Solution.

Good afternoon WasteOfFire,
Having placed an order on BestBuy.com, I imagine you would be concerned if you hadn’t received any confirmation email for your order. Typically, you may check your order’s status on BestBuy.com by signing into your BestBuy.com account and viewing your Order History. Alternatively, you should be able to utilize your order number, last name of the order, and billing phone number to use the Order Status tool on BestBuy.com.
Using the email address you registered with the forum, I was able to locate your order, and sadly it appears that while there’s a phone number associated with the shipping information, there doesn’t appear to be a phone number associated with the billing information. This may be why you were unable to use the Order Status tool I previously mentioned.
It appears that you chose expedited shipping, which allows 2 business days for shipping. It appears that your order finished processing on 10/28/14, but that UPS may have had a few issues with your delivery, which caused a short delay, and for your package to arrive on 10/31/14. I apologize for any inconvenience this may have caused you.
I have some further information in regards to your order, and I am sending you a private message. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Unable to confirm order

Similar Messages

Maybe you are looking for