Unable to Connect Oracle 7 with Data Services 3.2

Hi All,
I am incredibly facing an issues with Oracle 7 connecting with Data Services 3.2. with Native client drivers (TNS Names).
The client legacy application is on Oracle 7, they are moving the data from legacy to SAP ECC. My role is to transfer the data from Oracle 7 to SAP ECC, We are using Data Services 3.2 for conversion. This Data Services 3.2 is not connecting with Oracle 7 by using oracle native drivers (TNS Names).
I am able to connect Oracle 8 client with SQL *Plus, but with Data Services its not connecting, I am able create Data Store but when try to import the table the error message I am getting like "ORA-24316: Illegal handle Type"
Is there any other solution for this to connect, or Is Data Services 3.2 will not connect to Oracle 7 since its older version.
Please reply with your thoughts, or with some solution.
Appreciate your prompt reply. Many thanks.

Hi Paul,
Currently I am using ODBC connection to read the data from legacy Oracle7, but ODBC is very very slow, queries are taking hours to fetch the data. Is there any other solution by chance... I read that DataDirect is the one can connect to any versions of oracle and its bit faster, is that true. Please clarify me. If that is the solution where can I get this DataDirect drivers for oracle 7? Please advice me.
Thank You,
Ashok

Similar Messages

Unable to connect mssql with shared services

Hi all
I am getting error in config mssql with shared serives. I am trying to do with 9.3.1. I am getting the below error. Previously also I faced the same error but at that time I enabled the tcp./ip in sql manager..it works...but right now it is not working. can anyone face the same situation. The error I got was.
Feb 02, 2008, 03:36:27 PM), com.hyperion.cis.config.AbstractProductDBConfigurator, ERROR, Error:
hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: suresh:1433. Reason: Connection refused: connect
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
     at hyperion.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
     at hyperion.jdbc.base.BaseConnection.connect(Unknown Source)
     at hyperion.jdbc.base.BaseConnectionStartup.run(Unknown Source)
(Feb 02, 2008, 03:36:27 PM), com.hyperion.cis.config.wizard.DBSetupPanel, ERROR, Error:
com.hyperion.cis.config.ConnectException
     at com.hyperion.cis.config.AbstractProductDBConfigurator.checkConnection(AbstractProductDBConfigurator.java:270)
     at com.hyperion.cis.config.wizard.DBSetupPanel.queryExit(DBSetupPanel.java:368)
     at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
     at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.notifyListeners(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Thanks
M.V

What did you do to resolve this error.
Thanks
skolli

Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7 (Apex Listener)

Background
1. Weblogic 10.3.6.0 running on Oracle Linux 6.5 with Oracle JRockit(R) (build R28.2.3-13-149708-1.6.0_31-20120327-1523-linux-x86_64, compiled mode)
2. Oracle Apex 4.2.1
3. Apex Listener 1.1.3
4. Apex and Apex Listener running on the Weblogic box above
5. SQL Developer 4.0.2 running on Windows 7 64 bit / Java 1.7.0_55
Updated Apex to 4.2.5 via p17966818_425_Generic.zip patchset. Apex environment running fine as do all applications via Listener 1.1.3
Updated Oracle Listener to the latest version of Oracle REST Data Services 2.0.7
Current Status
Apex Applications and RESTful services are running fine.
Problem
Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7
Error message in SQL Developer - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
Additional Information
Steps followed -
1. The oracle users APEX_LISTENER and APEX_REST_PUBLIC_USER did not exist, so I ran apex_rest_config.sql from the APEX 2.4.1 patchset whilst connected sys as sysdba and provided the same password as APEX_PUBLIC_USER for both users.
2. I also ran
grant insert, delete on APEX_040200.wwv_flow_rt$privilege_groups to APEX_LISTENER;
alter session set current_schema = APEX_LISTENER;
create or replace synonym wwv_flow_rt$privilege_groups for APEX_040200.wwv_flow_rt$privilege_groups;
as per Oracle SQL Developer User's Guide Release 4.0
3. copied ords.war to apex.war
4. java -jar apex.war configdir /u01/app/oracle/admin/apex/devdomain1/
5. java -jar apex.war
Jun 5, 2014 5:15:31 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter the name of the database server [localhost]:dbservername
Enter the database listen port [1521]:
Enter 1 to specify the database service name, or 2 to specify the database SID [1]:1
Enter the database service name:dbservicename
Enter the database user name [APEX_PUBLIC_USER]:
Enter the database password for APEX_PUBLIC_USER:
Confirm password:
Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:2
Jun 5, 2014 5:16:52 PM oracle.dbtools.common.config.file.ConfigurationFiles update
INFO: Updated configurations: defaults, apex, apex_al, apex_rt
Enter 1 if you wish to start in standalone mode or 2 to exit [1]:2
6. java -jar apex.war user adminlistener "Listener Administrator"
Jun 5, 2014 5:18:52 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter a password for user adminlistener:
Confirm password for user adminlistener:
Jun 6, 2014 5:19:12 PM AM oracle.dbtools.standalone.ModifyUser execute
INFO: Created user: adminlistener in file: /u01/app/oracle/admin/apex/devdomain1/apex/credentials
7. Updated the defaults.xml file
Added
<entry key="apex.security.user.roles">RESTful Services</entry>
<entry key="apex.security.developer.roles">OAuth2 Client Developer, SQL Developer</entry>
as per Oracle SQL Developer User's Guide Release 4.0
Changed
<entry key="debug.printDebugToScreen">false</entry>
to
<entry key="debug.printDebugToScreen">true</entry>
for RESTful debugging
Added
<entry key="security.verifySSL">false</entry>
to use OAuth2 in Non HTTPS Environment as per Oracle® REST Data Services Installation and Configuration Guide, Release 2.0
8. Deleted the Admin and Manager Roles within the apex application deployment which were part of the Apex Listener 1.1.3 install
9. Deployed the apex.war in weblogic
10. Stopped and started the weblogic server to which apex.war was deployed
11. In SQL Developer, View, RESTful Services. In the RESTful services windows hit connect, Create a new connection,
Connection Name DEV
Username adminlistener
selected http protocol
Hostname weblogicservername
Port 7250
Server Path /apex
Workspace (blank)
On the Authentication dialog
Username adminlistener
Password passwordsuppliedabove in step 6
Response is a dialog box titled Authentication Failed
message - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
NOTHING UNUSUAL IN ANY OF THE WEBLOGIC LOG FILES, EXCEPT THAT IT STATES
'Oracle REST Data Services version : 2.0.6.27.18.06' when I've installed 2.0.7.
Any help much appreciated

Further to the above post, I thought I'd simplify my Apex Listener install just to see if I can connect to it via SQL Developer
So downloaded the latest version 2.0.8 and decided to configure and run the Listener on my pc whilst still connecting to the same database.
Operating system : Window 7 Pro 64 bit
Oracle Apex Listener 2.0.8
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
Went through the configuration as above, once started I tried again to access the listener via SQL Developer. This time I received this output from the listener:
INFO: Error: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found, occurred during execution of: [CALL, insert into wwv_flow_rt$approvals (user_name,status,client_id,security_group_id,created_by,created_on,updated_by,updated_on) values(/*in:user_id*/?,/*in:status*/?,/*in:client_id*/?,/*in:tenant_id*/?,upper(/*in:user_id*/?),/*in:created*/?,upper(/*in:user_id*/?),/*in:created*/?), [tenant_id, in, class java.math.BigInteger], [client_id, in, class java.math.BigInteger], [user_id, in, class java.lang.String], [status, in, class oracle.dbtools.rt.oauth.ApprovalRequest$Status], [created, in, class java.sql.Timestamp]]with values: [adminlistener, APPROVED, 3858401374580004, -1, adminlistener, 2014-06-23 12:19:18.785, adminlistener, 2014-06-23 12:19:18.785]
SQL Developer responded with an Authentication Failed titled dialog with the following displayed in the body of the dialog
Cannot connect to DEV.
<!DOCTYPE html>





<html>

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
<style type="text/css" media="screen">html,body,div,span,h3,p,ol,ul,li,header,hgroup{margin:0;padding:0;border:0;font-size:100%;font:inherit;vertical-align:baseline}header,hgroup{display:block}body{font:normal 12px/16px Arial,sans-serif;margin:0 auto;background:#6a9cda}header#xHeader{border-bottom:1px solid #8fa4c0;position:relative;z-index:10;background:none #000}header#xHeader hgroup{width:974px;margin:0 auto;position:relative;height:36px;background:none #000}header#xHeader a#uLogo{margin:8px 0;display:inline-block;font:bold 14px/20px Arial,sans-serif;color:#AAA;text-decoration:none}header#xHeader a#uLogo span.logo{color:#F00}.no-css3 div#xContentContainer div.xContent{padding-top:14px}.no-css3 div#xContentContainer div.xContent div.xMainLeft h2{margin-top:0}div#xWhiteContentContainer{margin-bottom:30px}div#xWhiteContentContainer.xContentWide{background:#FFF;margin-bottom:0}div#xWhiteContentContainer.xContentWide div.xWhiteContent{-moz-border-radius:0;-webkit-border-radius:0;border-radius:0;-moz-box-shadow:none;-webkit-box-shadow:none;box-shadow:none}div#xWhiteContentContainer div.xWhiteContent{width:974px;margin:0 auto;padding:0 0 20px 0;background:#FFF;min-height:500px;-moz-border-radius:0 4px 4px 4px;-webkit-border-radius:0 4px 4px 4px;border-radius:0 4px 4px 4px;-moz-box-shadow:0 1px 2px rgba(0,0,0,0.15);-webkit-box-shadow:0 1px 2px rgba(0,0,0,0.15);box-shadow:0 1px 2px rgba(0,0,0,0.15)}div#xContentHeaderContainer{background:#6a9cda;-moz-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;-webkit-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset}div#xContentHeaderContainer div.xContentHeader{width:974px;margin:0 auto;padding:30px 0 32px 0;position:relative;min-height:60px}div#xContentHeaderContainer div.xContentHeader h3{font:bold 24px/24px Arial,sans-serif;color:#fff;text-shadow:0 2px 1px rgba(0,0,0,0.25);margin:0 0 20px 0}div#xFooterContainer{min-height:200px;border-top:1px solid rgba(0,0,0,0.15);background:#6a9cda}body.errorPage div#xContentHeaderContainer div.xContentHeader{min-height:30px}body.errorPage div#xContentHeaderContainer div.xContentHeader h3{font:bold 30px/30px Arial,sans-serif;color:#FFF;text-shadow:0 1px 2px rgba(0,0,0,0.25);margin:0}div.errorPage p{font:normal 14px/20px Arial,sans-seri;color:#666;padding:0 0 10px 0}div.errorPage ul{list-style:disc outside;padding:0 10px 0;margin:0 0 20px 0}div.errorPage ul li{font:normal 12px/16px Arial,sans-serif;color:#666;margin:0 0 8px 10px}pre{font-family:Consolas,"Lucida Console","Courier New",Courier,monospace}
</style>
<script type="text/javascript" charset="utf-8">
'header hgroup'.replace(/\w+/g,
function(n) {
document.createElement(n)
</script>
<title>Internal Server Error</title>
</head>
<body class="errorPage">
<header id="xHeader">
<hgroup>
<a id="uLogo" href="./"><span class="logo">ORACLE</span>
REST DATA SERVICES</a>
</hgroup>
</header>
<div id="xContentHeaderContainer">
<div class="xContentHeader">
<h3>
<span class="statusCode">500</span> - <span
class="statusMessage">Internal Server Error</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons">
</ul>
</p>
<p>
<pre>Request Path passes syntax validation
Mapping request to database pool: PoolMap [_failed=false, _lastUpdate=-1, _pattern=null, _poolName=apex, _regex=null, _type=REGEX, _workspaceIdentifier=null, _serviceName=null]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
Choosing: oracle.dbtools.rt.oauth.TokenHandler as current candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
No Tenant Principal established yet, continuing processing
APEX_LISTENER pool exists, continuing processing
No matching tenant found for: oauth2, cannot dispatch
Chose oracle.dbtools.rt.oauth.TokenHandler as the final candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true] for: POST oauth2/token
oauth2/token authorized as: p6xycV-2QceFnFHkWyJlnA..
</pre>
</p>
<p>
<pre>WebException [statusCode=500]
at oracle.dbtools.rt.web.WebException.webException(WebException.java:343)
at oracle.dbtools.rt.web.WebException.internalError(WebException.java:262)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:514)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApprovedRequest(JDBCOAuthDataAccess.java:181)
at oracle.dbtools.rt.oauth.OAuthAuthorization.resourceOwnerCredentials(OAuthAuthorization.java:654)
at oracle.dbtools.rt.oauth.OAuthAuthorization.tokenRequest(OAuthAuthorization.java:273)
at oracle.dbtools.rt.oauth.TokenHandler.post(TokenHandler.java:44)
at oracle.dbtools.rt.web.RequestHandler.response(RequestHandler.java:268)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:361)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:85)
at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:93)
at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)
at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Unknown Source)
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1046)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
at sun.reflect.GeneratedMethodAccessor28.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:230)
at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
at com.sun.proxy.$Proxy44.execute(Unknown Source)
at oracle.dbtools.common.jdbc.JDBCInsert.execute(JDBCInsert.java:58)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:487)
... 34 more
</pre>
</p>
</div>
</div>
</div>
<div id="xFooterContainer">
</div>
</body>
</html>
I am assuming this must be part of the problem I am seeing this the Weblogic deployment in my original post.
Does anyone have any suggestions on how best to tackle this?
Regards,
Derek

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

Unable to connect to the Data Access service for this management server

Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
Install was failing on selecting the management server. Research led me to
Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
>setspn -l domain\scom.mgmt
Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
MSOMSdkSvc/SCOM-MGMT1
MSOMSdkSvc/SCOM-MGMT1.domain.net
MSOMSdkSvc/SCOM-MGMT2
MSOMSdkSvc/SCOM-MGMT2.domain.net
>setspn -l domain\scom-mgmt1
Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/SCOM-MGMT1.domain.net
TERMSRV/SCOM-MGMT1.domain.net
WSMAN/SCOM-MGMT1.domain.net
RestrictedKrbHost/SCOM-MGMT1.domain.net
HOST/SCOM-MGMT1.domain.net
MSOMHSvc/SCOM-MGMT1
TERMSRV/SCOM-MGMT1
WSMAN/SCOM-MGMT1
RestrictedKrbHost/SCOM-MGMT1
HOST/SCOM-MGMT1
>setspn -l domain\scom-mgmt2
Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/ SCOM-MGMT2.domain.net
MSOMHSvc/ SCOM-MGMT2
WSMAN/SCOM-MGMT2.domain.net
WSMAN/SCOM-MGMT2
        TERMSRV/SCOM-MGMT2.domain.net
TERMSRV/SCOM-MGMT2
RestrictedKrbHost/SCOM-MGMT2
HOST/CHH-SCOM-MGMT2
RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
HOST/CHH-SCOM-MGMT2.osi-asp.net
>setspn -l domain\scom-ssrs
Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
    WSMAN/SCOM-SSRS
WSMAN/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net:1433
    TERMSRV/SCOM-SSRS.domain.net
TERMSRV/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS
  HOST/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS.domain.net
HOST/SCOM-SSRS.domain.net
When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
all the same version”.
OpsMgrSetupWizard.log states…
Info:
:Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long.
Info:
:StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
Bob

Well, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
/DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
Problem signature:
Problem Event Name:
CLR20r3
Problem Signature 01:
setupchainerui.exe
Problem Signature 02:
7.0.5000.0
Problem Signature 03:
522a5b85
Problem Signature 04:
mscorlib
Problem Signature 05:
4.0.0.0
Problem Signature 06:
53b4fc1e
Problem Signature 07:
e4d
Problem Signature 08:
5a
Problem Signature 09:
System.FormatException
OS Version:
6.1.7601.2.1.0.274.10
Locale ID:
1033
Additional Information 1:
4911
Additional Information 2:
49111a576c61a461b7f2900e4224563c
Additional Information 3:
a1e6
Additional Information 4:
a1e62e9c159c1d7601a31ccff83dbf94
App Event Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
<EventRecordID>4999</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
<EventRecordID>5000</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>SetupChainerUI.exe</Data>
<Data>7.1.10226.0</Data>
<Data>522a5b85</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>5315a05a</Data>
<Data>e0434352</Data>
<Data>000000000000940d</Data>
<Data>a64</Data>
<Data>01d03bf626a03a7a</Data>
<Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
<EventRecordID>5001</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>setupchainerui.exe</Data>
<Data>7.0.5000.0</Data>
<Data>522a5b85</Data>
<Data>mscorlib</Data>
<Data>4.0.0.0</Data>
<Data>53b4fc1e</Data>
<Data>e4d</Data>
<Data>5a</Data>
<Data>System.FormatException</Data>
<Data />
<Data />
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
<Data />
<Data>0</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
<Data>0</Data>
</EventData>
</Event>
OpsMgrSetupWizard.log
[13:48:16]:
Error:     :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
[13:48:16]:
Error:     :StackTrace:
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
   at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
   at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
   at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
Any ideas? I feel like I’m just going in circles…Bob

Unable to connect JAVA with Oracle

I have jdk1.6 and oracle installed on my machine but unable to connect java with database
have classes12.jar and ojdbc14.jar
my environmental variables in respect to this are :
JAVA_HOME= C:\Java\jdk1.6.0_04
JRE_HOME=C:\Java\jdk1.6.0_04
PATH=J:\oracle\ora92\lib;
J:\oracle\ora92\bin;
C:\Program Files\Oracle\jre\1.3.1\bin;
C:\Program Files\Oracle\jre\1.1.8\bin
CLASSPATH=J:\oracle\ora92\jdk\jre\bin\JdbcOdbc.dll;
J:\oracle\ora92\jdbc\lib\classes12.jar;
J:\oracle\ora92\jdbc\lib\ojdbc14.jar
The code is
import java.sql.*; public class dat1 { public static void main(String[] args)throws SQLException,ClassNotFoundException { try { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); Class.forName("com.oracle.jdbc.OracleDriver"); } catch (ClassNotFoundException e) { System.out.println("unable to load driver"); return; } } }
the error message is
Error in thread "main" java.lang.NoClassDefFoundError
Please Help Me
Thanks For Reading
Thanks a lot in Advance For your ANSWERS

maybe if you asked nicely instead of ordering people around we might tell you.
As it is all you're going to hear is that you don't need both those jars, as they contain different versions of the same driver.
I'm not going to tell you which you need, as you should have the documentation to tell you that. But then you also should have the documentation to tell you how to set your classpath properly and you failed to read that too.

Unable to Connect to the Data Source with Report Builder when using a closed Excel file

I am using Report Builder 3.0 and to get started I am using an Excel spreadsheet as my data source. I set this up just fine. I can connect successfully if the file is open Excel. But if I close the file, I get the error "Unable to
Connect to the data source".
This is my connection string:
Dsn=Licenses;dbq=C:\USERS\AMEADE\DOCUMENTS\licenses.xlsx;defaultdir=C:\USERS\AMEADE\DOCUMENTS;driverid=790;fil=excel 8.0;maxbuffersize=2048;pagetimeout=5
Works fine if the file is open but stops working when the file is closed. Any idea what I can do?

Hi Alice,
Based on my understanding, when you keep the Excel file open, you can connect to the data source correctly. But when you close the Excel file, the error “Unable to Connect to the data source” is thrown out.
In your scenario, I would like to know if only this Excel comes across this issue. Have you experienced the same issue when you use other Excel files as a data source? As we tested in our environment, we can connect to the data source whether the Excel file
is open. You can refer to this
article to create a data source again then check if you can connect to the data source when the Excel file is closed.
If issue persists, I would suggest you use the
Process Monitor to capture the processes during the connection to the data source. Then check the result of each process to find the exact reason.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Extract data from ECC to Oracle using Data Services 4.0

How to extract data from ecc6.0 Business content extractors to oracle using sap bo data services 4.0

Are you trying to use the SAP BW Business Content to extract data out of ECC and load into Oracle tables with Data Services? If that's the case, then you cannot do that. The SAP BW Business Content was developed to only be used in conjunction with SAP BW. When using Data Services to access the extractors in ECC, it has to have an SAP BW InfoPackage associated with it to execute. In this architecture, Data Services is only a pass through from ECC to BW and allows the ability to do some transformations of data prior to loading into the EDW layer (staging tables basically) on SAP BW.
To connect ECC to Oracle, you're going to have to have all of the SAP BusinessObjects supplied Function Modules loaded onto ECC, along with a non-dialog logon account that has the ability to pass dynamic ABAP programs, generate the programs and schedule them. Depending on how you want to process the output, you may also have to have the ability to write to files on the ECC application servers and have an FTP account created on the application servers that can GET flat files and potentially DELETE them (you're going to need to delete periodically, otherwise your jobs will crash when the file space allocation has been consumed).

ORA-29701: unable to connect to Cluster Synchronization Service

Hi, I'm working on an Oracle 11.2 EE on a RedHat 5.4.
I installed the Grid Infrastructure to work with ASM.
While starting ASM instance I got this error:
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I tried to start the resource wiht:
$ crsctl start resource -all
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Start failed, or completed with errors.
Then i tried this:
$ crsctl start has
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
Do you have any suggestion on how start the CSS?
Thanks in advance.
Samuel

Hi,
it was just a metter of the run level.
As soon as I set it to 5 everything started to work.
Samuel

IP address changed and unable to connect to the java services?

Hi Guys,
we had installed PI 7.1 and everything is working perfectly fine. we have moved the system to the data center from our network. The server has been assigned a new IP address. All instances (ABAP+JAVA) have come up and i was able to login the ABAP stack.
But when i try to open http://hostname:50000/dir is not working and when i check in SMICM trace i am getting the error as conect to host:50000 failed check the host configuration .
I have also mapped the IP address to the host name in the host file but it did not help.
any help would be appreciated
Thanks,
Srini
Edited by: srinivas kapu on Dec 5, 2008 5:34 PM

Hi Bhargav,
Thanks for the quick reply. I am unable to connect to any java services like IR, ID, NWA etc with neither IP or FQDN. We did not had any issues previously with the FQDN and only change is now the IP address is changed.
Thanks,
Srini

The search request was unable to connect to the Search Service

I have upgraded from WSS 3.0 to SharePoint Foundation 2010. So far everything appears to be OK apart from my search.
When I attempt a search I get the following:
The search request was unable to connect to the Search Service.
I checked the Manage Database Update Status in Central Admin and noticed the following(an upgrade is required):
Also, I checked Manage Services on Server and noticed that the only search related service is 'SharePoint Foundation Help Search'.
If I go into Manage Service Applications and click new there is no option to add a search service.
Finally I tried PSConfig:
PS C:\Users\administrator.ACHESON> PSConfig.exe -cmd upgrade -inplace b2b -force
-cmd applicationcontent -install -cmd installfeatures
SharePoint Products Configuration Wizard version 14.0.6009.1000. Copyright (C) M
icrosoft Corporation 2010. All rights reserved.
Performing configuration task 1 of 6
Initializing SharePoint Products upgrade...
Waiting to get a lock to upgrade the farm.
Successfully initialized SharePoint Products upgrade.
Performing configuration task 2 of 6
Initiating the upgrade sequence...
Successfully initiated the upgrade sequence.
Performing configuration task 3 of 6
Registering SharePoint features...
Feature installation has determined that there are no new features that require
installation.
Successfully registered SharePoint features.
Performing configuration task 4 of 6
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files..
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 5 of 6
Upgrading SharePoint Products...
10.00%Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfig
urationTaskException was thrown. Additional exception information: The upgrade
command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Total number of configuration settings run: 5
Total number of successful configuration settings: 4
Total number of unsuccessful configuration settings: 1
Successfully stopped the configuration of SharePoint Products.
Configuration of SharePoint Products failed. Configuration must be performed be
fore you use SharePoint Products. For further details, see the diagnostic log l
ocated at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\1
4\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log and the application
event log.
This is the warnings and errors that the log contained:
10/09/2013 12:48:16 10 WRN Found registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ComponentsToRegister, but the SubKeyCount is zero
10/09/2013 12:48:24 10 WRN Failed to add the service connection point for this farm
10/09/2013 12:48:24 10 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=acheson-glover,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
10/09/2013 12:48:40 10 ERR The exclusive inplace upgrader timer job failed.
10/09/2013 12:48:40 10 ERR Task upgrade has failed with a PostSetupConfigurationTaskException An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
10/09/2013 12:48:40 10 ERR An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:40 10 ERR Task upgrade has failed
10/09/2013 12:48:40 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
10/09/2013 12:48:40 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed or some tasks were not run
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed to execute
10/09/2013 12:48:41 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log, fix the problem, and run this configuration wizard again.
10/09/2013 12:48:41 1 ERR Post setup configuration was not run successfully when using the command line task driver module
How do I resolve this?
Cheers
Paul

Hi,
SharePoint Foundation the search service should be installed by default. It's not the same as with 2010 Standard or Enterprise where you can create a "Service Application" for it.
Follow this article to configure SharePoint Foundation Search:
http://plexhosted.blogspot.com/2011/11/how-to-configure-sharepoint-foundation.html
Meanwhile, here is a thread which discusses the similar question:
Configuration of SharePoint Foundation 2010 Search
http://social.technet.microsoft.com/Forums/sharepoint/en-US/af57728f-ae20-477b-8c67-2b594a1a72de/configuration-of-sharepoint-foundation-2010-search?forum=sharepointadminprevious
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HELP I keep getting an error message on my IPHONE 4 that says Unable to connect to Cellular Data. How do I fix this?

HELP I keep getting an error message on my IPHONE 4 that says Unable to connect to Cellular Data and I have tried to reset network settings and factory reset but nothing helping so far. Took it to Verizon and they couldn't fix it either, said it's a problem with the phone itself and to contact Apple. My warranty is expired so Apple isn't much help either. How do I fix this? I have a data package so confused and I have had my phone for over a year but never had this issue before.

I am getting this message also.... mine cant update too...

I am Unable to connect iphone with Wi Fi and iTunes

I am Unable to connect iphone with Wi Fi and iTunes is ther any alternative for the same.

Dr.sudin wrote:
I wish to restore the earlier version of the iOS
You cannot.
If you are having issues with yoru SIM, contact your data carrier or the Apple store.

Connect SAP BO Data Services to Azure Blob Storage

Hi,
I want to connect SAP BO Data service to Azure Blob Storage. Is there a way to achieve this?
Thanks,

Hi Anton,
As of now, it is not possible for SAP BO Data Services to connect with Azure Blob Storage. However, you may put down your requirement in Azure Feedback, so that concerned development team can get it done in near future.
http://feedback.azure.com/forums/34192--general-feedback
Regards,
Manu Rekhar

RFC connection from SAP Data services to SAP ECC

We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

I am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time.

Unable to Connect Oracle 7 with Data Services 3.2

Similar Messages

Maybe you are looking for