Unable to Connect to the Data Source with Report Builder when using a closed Excel file

I am using Report Builder 3.0 and to get started I am using an Excel spreadsheet as my data source. I set this up just fine. I can connect successfully if the file is open Excel. But if I close the file, I get the error "Unable to
Connect to the data source".
This is my connection string:
Dsn=Licenses;dbq=C:\USERS\AMEADE\DOCUMENTS\licenses.xlsx;defaultdir=C:\USERS\AMEADE\DOCUMENTS;driverid=790;fil=excel 8.0;maxbuffersize=2048;pagetimeout=5
Works fine if the file is open but stops working when the file is closed. Any idea what I can do?

Hi Alice,
Based on my understanding, when you keep the Excel file open, you can connect to the data source correctly. But when you close the Excel file, the error “Unable to Connect to the data source” is thrown out.
In your scenario, I would like to know if only this Excel comes across this issue. Have you experienced the same issue when you use other Excel files as a data source? As we tested in our environment, we can connect to the data source whether the Excel file
is open. You can refer to this
article to create a data source again then check if you can connect to the data source when the Excel file is closed.
If issue persists, I would suggest you use the
Process Monitor to capture the processes during the connection to the data source. Then check the result of each process to find the exact reason.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Similar Messages

Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of '

When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations.  0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'.  0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed.  0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed.  0 0

Sorry hit the wrong button there. That is not entire solution and setting it to default would work when using a single box and not in a distributed application solution. If you are creating the analysis database manually or using the wizard then you can
set the impersonation to your heart content as long as the right permission has been set on the analysis server.
In my case I was using MS Project Server 2010 to create the database in the OLAP configuration section. The situation is that the underlying build script has been configured to use the default setting which is the SQL Service account and this account does
not have permission in Project Server I believe.
Changing the account to match the Project service account allowed for a successful build \ creation of the database. My verdict is that this is a bug in Project Server because it needs to include the option to choose impersonation when creating the Database
this way it will not use the default which led to my error in the first place. I do not think there is a one fix for all in relations to this problem it is an environment by environment issue and should be resolved as such. But the idea around fixing it is
if you are using the SQL Analysis server service account as the account creating the database and cubes then default or service account is fine. If you are using a custom account then set that custom account in the impersonation details after you have granted
it SQL analysis administrator role. You can remove that role after the DB is created and harden it by creating a role with administrative permissions.
Hope this helps.

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?

Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support

Unable to connect to the Data Access service for this management server

Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
Install was failing on selecting the management server. Research led me to
Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
>setspn -l domain\scom.mgmt
Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
MSOMSdkSvc/SCOM-MGMT1
MSOMSdkSvc/SCOM-MGMT1.domain.net
MSOMSdkSvc/SCOM-MGMT2
MSOMSdkSvc/SCOM-MGMT2.domain.net
>setspn -l domain\scom-mgmt1
Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/SCOM-MGMT1.domain.net
TERMSRV/SCOM-MGMT1.domain.net
WSMAN/SCOM-MGMT1.domain.net
RestrictedKrbHost/SCOM-MGMT1.domain.net
HOST/SCOM-MGMT1.domain.net
MSOMHSvc/SCOM-MGMT1
TERMSRV/SCOM-MGMT1
WSMAN/SCOM-MGMT1
RestrictedKrbHost/SCOM-MGMT1
HOST/SCOM-MGMT1
>setspn -l domain\scom-mgmt2
Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/ SCOM-MGMT2.domain.net
MSOMHSvc/ SCOM-MGMT2
WSMAN/SCOM-MGMT2.domain.net
WSMAN/SCOM-MGMT2
        TERMSRV/SCOM-MGMT2.domain.net
TERMSRV/SCOM-MGMT2
RestrictedKrbHost/SCOM-MGMT2
HOST/CHH-SCOM-MGMT2
RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
HOST/CHH-SCOM-MGMT2.osi-asp.net
>setspn -l domain\scom-ssrs
Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
    WSMAN/SCOM-SSRS
WSMAN/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net:1433
    TERMSRV/SCOM-SSRS.domain.net
TERMSRV/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS
  HOST/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS.domain.net
HOST/SCOM-SSRS.domain.net
When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
all the same version”.
OpsMgrSetupWizard.log states…
Info:
:Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long.
Info:
:StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
Bob

Well, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
/DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
Problem signature:
Problem Event Name:
CLR20r3
Problem Signature 01:
setupchainerui.exe
Problem Signature 02:
7.0.5000.0
Problem Signature 03:
522a5b85
Problem Signature 04:
mscorlib
Problem Signature 05:
4.0.0.0
Problem Signature 06:
53b4fc1e
Problem Signature 07:
e4d
Problem Signature 08:
5a
Problem Signature 09:
System.FormatException
OS Version:
6.1.7601.2.1.0.274.10
Locale ID:
1033
Additional Information 1:
4911
Additional Information 2:
49111a576c61a461b7f2900e4224563c
Additional Information 3:
a1e6
Additional Information 4:
a1e62e9c159c1d7601a31ccff83dbf94
App Event Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
<EventRecordID>4999</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
<EventRecordID>5000</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>SetupChainerUI.exe</Data>
<Data>7.1.10226.0</Data>
<Data>522a5b85</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>5315a05a</Data>
<Data>e0434352</Data>
<Data>000000000000940d</Data>
<Data>a64</Data>
<Data>01d03bf626a03a7a</Data>
<Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
<EventRecordID>5001</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>setupchainerui.exe</Data>
<Data>7.0.5000.0</Data>
<Data>522a5b85</Data>
<Data>mscorlib</Data>
<Data>4.0.0.0</Data>
<Data>53b4fc1e</Data>
<Data>e4d</Data>
<Data>5a</Data>
<Data>System.FormatException</Data>
<Data />
<Data />
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
<Data />
<Data>0</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
<Data>0</Data>
</EventData>
</Event>
OpsMgrSetupWizard.log
[13:48:16]:
Error:     :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
[13:48:16]:
Error:     :StackTrace:
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
   at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
   at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
   at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
Any ideas? I feel like I’m just going in circles…Bob

Sharepoint 2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi,
i had the same problem. First we figured out, that the Report Builder was working in the Root Site Collection of a Web Application but not in any other Site Collection of the WebApplication.
After that we took a look how the Report Builder is started. The Content Type got a Click Once Application as Template, but you can't open the URL in the Browser neither the referenced file can be found in the Feature folder on the SharePoint Server. Turns
out SharePoint does some crazy http redirection and that this doesn't work on Site Collections which are not at the root. At least if you installed Reporting Services Add In Service Pack 1.
Fun Fact: If you start the Report Builder on the Root Site Collection you can create a Report which works on any Site Collection. Its just the launch if the Report Builder which is broken.
Our Solution was the SQL Server 2012 Service Pack 1 Cumulative Update 8 which fixed the Problem.
You can request a download here: http://support.microsoft.com/kb/2917531
Select the "2012_SP1_RSShrPnt_CU8_2917531_11_0_3401_x64" Fix and install it on every SharePoint Server in your Farm.

SP2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi Ali,
According to the current description, the issue may occur because SQL Server 2012 Reporting Services add-in feature for SharePoint 2013 isn’t installed correctly.
To resolve the issue, you need to reinstall add-in feature for SharePoint 2013.
References:
Install or Uninstall the Reporting Services Add-in for SharePoint
Document Library - Enable New Document, Edit Document Features
If the issue persists, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

I am unable to connect to the App Store with my 11" MacBook Air.

I keep getting a notification that says an OS X update is available, but when I try to connect to the App Store to download it, I get a message that says, "Unable to connect to the App Store at this time. Please try again later." I have downloaded OS X updates from the Apple site, but I am still unable to connect to the App Store. Can someone give me advice on this? Thank you.

Did you updated your iPhone lately?

REP-501: Unable to connect to the specified database in Report Server

I Get a 'REP-501: Unable to connect to the specified database' error, when trying to call a report from a button on a Forms 10g application, through a report object:
A portion of the code button:
report_id := find_report_object('REPORT');
set_report_object_property(report_id, report_destype, cache);
set_report_object_property(report_id, report_desformat, 'PDF');
set_report_object_property(report_id, report_server, p_server);
set_report_object_property(report_id, report_filename, 'report.rep');
report_job_id := run_report_object(report_id, lista_p);
rep_status := report_object_status(report_job_id);
job_number := length(servidor_rep) + 2;
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') LOOP
rep_status := report_object_status(report_job_id);
END LOOP;
IF rep_status = 'FINISHED' THEN
web.show_document('http://'||server_name||'/reports/rwservlet/getjobid' ||
substr(report_job_id, job_number) || '?server=' || p_server,'_blank');
ELSE
message('Error');
END IF;
The TSNMAMES configured in the OAS is as follows,
LISTENERS_PROD =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = zurquivip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = poasvip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = irazuvip.coope.local)(PORT = 1521))
DB01 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = zurquivip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = poasvip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = irazuvip.coope.local)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DB01.COOPE.LOCAL)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
This application does not fail in other databases, only in which I have the problem.
The connection to the database through the SQLPLUS and other applications works well. The error is presented only when calling reports from the application.
Another point is that the problem is presented with some users and not with others even they have the same conditions as roles, profiles, grant objects, etc.
If i run my report with the following url applying directly on address bar of web browser then it run fine on web browser
http://hostname.domain:port/reports/rwservlet?report=myreport.jsp&userid=un/pw@db&destype=cache&desformat=PDF
OAS 10g and Database are on different machines.
Please... any idea about this problem?
Thanks!!

I use a report object, imagine that sends connect information when creating the Job in the reports server.
However the same problem happens if I call to report from the Internet Explorer with all parameters of connectivity, for example;
http://hostname.domain:port/reports/rwservlet?report=myreport.rep&userid=un/pwdb@&destype=cache&desformat=PDF
The only difference in this database is that it is configured in a RAC and as I mentioned the problem occurs with some users and not with others, even if they are identical.
Thank for your help!

We are unable to connect to the content you've requested (message when I try to view a DVD)

"we are unable to connect to the content you've requested." I'm trying to view a DVD, but I'm getting this message on both my iMac and my MacBookAir. There are two DVD's and I'm getting the same message using either DVD on both computers. I was sent a Flash drive w/ the same video, but I am getting the same message again. One of the DVD's was a replacement, because I thought it was a DVD problem, but now I think it's a computer problem, but I have no idea what to do. It must be a setting, but I know nothing about hardware. If there is a solutiion, I need a step by step answer that I can print out and follow.

My apps are updating OK. This may be an iTunes/App Store server issue, but you can try restarting the iPad and see if that helps. You can also try quitting the app store, restart and try again,
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

"Unable to connect to data Source" SRSS Report building on a windows 7 workstation

I have the is error when tring to up date my SRSS reports. We recently had our dba reissue the Certificate for our SCCM SQL server and now when I export that certificate and load it in the Trusted Root of any Workstation or any store
on the workstation - I still get the trusted root error??
"The Certificate Chain was issued by an authority that is not trusted:"
"A connection was successfully established wit the server. but then an error occurred during the login process. (provider:
SSL Provider, error 0 - The certificate chain was issued by an authority that is not trusted.)"
I am using HTTP: for report server connections.
I had no issues exporting the SQL Server Certificate in the past and importing to computers trusted Root store. Now when I do this the error still appears and I can not edit my SRSS reports in SCCM. The Primary SCCM 2012 Server is also the SQL
server and SRSS reporting server in production.
Where do I go from here?
Help Please!
Thank you
Gary Pearson
Gary AlexionIT

On 07.09.2011 03:06, sjt4423 wrote:
>
> We currently have an NSS volume running on SLES 10 sp3 / OES2 SP2.
> We have configured CIFS on the server.
> Our workstations have an NCP client.
> We have modified the login script to force a drive mapping via CIFS.
> The drive mapping works perfectly on Windows XP.
Most likely ntlm version issue, you need to change the registry on win7
machines,
http://www.novell.com/support/viewCo...5420&sliceId=1
-sk

Bug report: Controls in the Data Entry property page reset when using relative time

Create a blank VI.
Drop a numeric control.
Right click and select "Display Format".
Change to a relative time.
Switch to the "Data Entry" tab page.
Uncheck the "Use Default Limits" boolean.
Try changing the values and you will see that they return to their previous values (inf, by default). This persists even after pressing OK and opening the dialog again. It looks like the values are held in a cache and put back into the controls, since if you change a page and go back to the limits page, it shows the correct values. I also managed to get it to display the values using the correct format (relative time), which I assume is what it should be doing.
This is in LabVIEW 8.6.
Try to take over the world!
Attachments:
Relative Time Data Entry Bug.vi ‏5 KB

I spent some time playing around with this in 8.6.1, and at this time do not consider it a bug - unless there is something I completely missed.
When you set to relative time, the inputs for data entry are expecting HH:MM or HH:MMS, depending on which display setting you chose. Typing a '7' is undefined - does the user mean hours? Minutes? Seconds? Parsecs ?
Once we type in a value that matches the format and we get the display to change, it is true that from now on if we type '7' in the field, it will automatically coerce it to 7:00, if we type 36 it coerces to 36:00. If we type 7.5, it does not change the value at all. I think at this point, the user knows what is going on, so this behavior is acceptable. After accepting the changes and re-opening the properties window, the limits are persistent.
I was not able to reproduce typing a '7' in the limit, having it automatically coerce back to '-inf', then going to a different tab or clicking ok, and coming back and seeing it as 7:00. It was still '-inf'. If you have some more details on this, maybe I can reproduce it, but from everything I tried, users are be able to enter values and these values are saved.
Edit - I am aware of the other forum post and the CAR filed there...
Message Edited by Robbob on 03-03-2009 11:20 AM
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video
Attachments:
2009-03-03_105522.jpg ‏51 KB
2009-03-03_105336.jpg ‏58 KB

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Unable to connect to XML data source

Hi,
I'm trying to connect to a XML file I save from a web service and read it's contents.
The file contents are:
<?xml version="1.0" encoding="ISO-8859-1"?>
<getEMailResponse xmlns="http://tempuri.org">
<getEMailResult>[email protected]</getEMailResult>
</getEMailResponse>
the DTD is:
<!ELEMENT getEMailResponse (getEMailResult)>
<!ATTLIST getEMailResponse xmlns CDATA #IMPLIED>
<!ELEMENT getEMailResult (#PCDATA)>
And the connection is defined as follows:
jdbc:snps:xml?f=//atlas/jsmith/doc/result.xml&d=//atlas/jsmith/doc/result.dtd&ro=true&case_sens=true
If I try it, it returns an "java.sql.SQLException: class org.xml.sax.SAXParseException"
I've seen that removing the xmlns attrib solves the problem, but it's impossible (as far as I know) to remove it from the xml file, since it comes from a webservice request.
Does anybody have any ideas as of how to proceed?
Thanks a lot for your help.

I have solved applying the patch 10.1.3.4.2
Thanks

I can't see the cursor on the logon screen with my MBP when using it in bright sunlight.

I have a 15 inch MacBook Pro with an anti glare screen. I am running Lion 10.7.3.
It is being used in bright sunlight in southern greece very sucessfully apart from the fact I cant see the cursor on the logon screen to select the user I want to log in as. .
Setting the cursor to a larger size using the universal access options works really well once I have logged in but at the moment I have to dash for the nearest shade to be able to see the screen to log in.
Any suggestions? A key sequence to swap between users on the logon screen would do (there are only two)

If you're using it in bright light, you may be getting sunlight through the back of the machine which can wash out the display. The Apple logo on the back of the lid is actually a cut-out that uses the systems back light to make it glow. Bright light (especially sunlight) can actually shine through the back. As the users in the login are typically in the middle of the display, this is the area most likely to be washed out as that is where the Apple logo is. You can try just putting your hand over the Apple logo on the back to block the sunlight when trying to log in.

Unable to Connect to the Data Source with Report Builder when using a closed Excel file

Similar Messages

Maybe you are looking for