Unable to connect to Hospital system. The system redirects to an agreement page but ny computer just says I am not connected to the internet. Any ideas?
I am a regular patient at a local hospital that provides free internet access to patients AFTER they accept terms and conditions. I have had no problems until recently when instead of redirecting to the systems acceptance page, I started getting a message that I was not conected to thye internet.
This began about 4 weeks ago and continues. I do not have redirect blocked and have tried Safari, Firefox and Google Chrome to no avail. Please give me some ideas.
Thanks,
Jim
Contact the hospital IT staff and ask them if they are using ActiveX. If they are, that's not 100% accessible and against section 508 accessibility guidelines. They should use http://www.anybrowser.org/ as a guide for a platform agnostic website.
Similar Messages
-
I have full bars but i can't connect to the internet. I've done all the usuall thing like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?
As with previous posts this is usually a DHCP issue and occurs frequently especially with routers connected to Cable Modems or those Micro-Cell towers.
Unplug all Routers, AirPorts (or other off brand Wi-Fi broadcast units) and any other Wireless broadcast unit that might provide you with a WDS (often other AirPorts feeding off the signal of the AirPort closest to Cable/DSL Modem) and best to totally power down the Unit affected; lastly either hold a reset button on Cable/DSL modem for 30-45 seconds or actually power it down if an option (not suppose to power down Cable Modems that have Telephony for some odd never completely explained to me reason).
Let Cable/DSL Modem re-boot till 'all green lights'. Then power up each device involved in order from closest to farthest waiting each time for completion of initiation. Micro-cell towers can take 10 minutes to completely re-boot and you must wait for across the board green lights in my experience. Even WDS can add a few minutes till all green on mother AirPort unit.
Only NOW may you re-start the offending device and see if it will connect. Works about 99% of the time! -
My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?
Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this. -
I downloaded messages beta, and after trying video chat with my wife who was using iChat, I decided to uninstall, and every time I try to uninstall, I get a network problem saying that the messages beta uninstalled can't be downloaded as my computer isn't connected to the Internet, and I clearly am connected thru my wifi, any ideas how to get around this?
Hi,
Any version of iChat or the Message beta will have issues if you have two connections to the internet.
In fact iChat 4 in Leopard has the worst issues particularly if the computer you are on is Sharing the Internet with other devices (See System Preferences > Sharing > Internet Sharing)
iChat can just about manage in Text Chats to connect with other people.
In Video Chats and Audio Only chats and Screen Sharing ichat needs to be in "One Place"
With two IPs issued from a router for Wifi and Ethernet (See the differences in System Preferences > Network for Ethernet and Advanced Button > TCP tab for Wifi) means that iChat looks like it is in two places.
It is worse if you share the Wifi of a neighbour and use Ethernet yourself.
Using Ethernet may get your computer to access the DNS servers from your router more consistently so that Messages can find the place to download iChat 6 (There is evidence that both downloading Messages Beta and registering the Apple ID needs the correct or adequate DNS server info to work properly)
This address for the Message Beta download seems to hard to find for some DNS servers
http://swdlp.apple.com/cgi-bin/WebObjects/SoftwareDownloadApp.woa/wo/XeLd6tIQQ2O yGCki8irQgw/2.5
(This is the accompanying "Thank you for Downloading" page)
The point you make though, that a Ethernet connection may work better, is valid.
8:32 PM Sunday; May 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Unable to use itunes due to the following any ideas??
When I open itunes application from the dock I am then asked for a log in name and password. With the following text. To access this site , you must log in to area "daap" on 0.0.0.0. Please help!! I then have to force quit the application to close it. I have tried entering my apple id and password but to no avail.
Check iTunes / Preferences - Sharing
If any of the boxes are selected including Share my library on my local network, deselect then click OK
Try launching iTunes. -
I tried to install a virus scanner, traffic light to see where the problem exists with no luck, any suggestions?
See Thomas's site: http://www.thesafemac.com for help with adware.
Also go to Safari, Preferences, Security and see that you have Block Pop-up Windows checked. -
hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
Please could someone help???
And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
Thanks alot! I really appreciate your help..Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have just updated the op system on my phone, it now won't let me close down any apps that are open in the background, any ideas?
Double-click the Home button to bring up the app screen, then swipe upwards on the app.
http://howto.cnet.com/8301-11310_39-57602601-285/how-to-force-close-apps-on-ios- 7/
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question. -
I cannot get the wifi feature on my iphone to switch on. I have just uploaded the latest Operating system but nothing has changed. I have reset, again no change. Any ideas?
If you have an iTunes backup that includes the photos you may be able to extract them from the backup using a 3rd party utility such as http://www.wideanglesoftware.com/ibackupextractor/
-
When trying to access i tunes store when in I Tunes i cannot connect to the internet - any thoughts? i have tried un-installing and re-installing but no joy
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I am trying to connect to apple support and it keeps asking me to put in the SN of my MAC and when i do it says that the SN is invalid I am putting in the SN from about this mac and it is the same as the one on the bottom of the MAC any ideas ?
Did you purchase this product direct from Apple online, in an Apple Store, or through a third-party authorized reseller? Or did you buy it from an original owner whose Applecare plan was supposed to be transitioned to a new owner, by them?
Do you have an original shipping carton the unit arrived in?
If the product was a retail 'open carton' purchase and no
back-track is possible, contact the reseller.
And if the computer had seen a major service with logic
board replaced, etc, it may have other issues with serial
number vs one they may have assigned it. Usually a
new logic board may have the SN flashed or if a unit
was determined to be a reman, a new # assigned. But
that would appear in System Profiler, if officially reman.
If you registered a product anywhere with Apple, it would show on a web page along with its serial numbers, going back several years, at this page after you log in there.
https://getsupport.apple.com/GetproductgroupList.action
A blue text with triangle See all products and services opens an Apple ID
sign-in window, then the page changes to show your items & info about them.
If you run the serial number through online Lookup, what appears?
http://www.powerbookmedic.com/identify-mac-serial.php
Not sure if this helps, 'your product' should appear - if registered.
Good luck & happy computing! -
hi all everytime i try to downlod itunes it reaches maybe 97% and then it times out i am not sure what seems to be the problem because my internet connection is fine.. any ideas???
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the iTunes forum appropriate for your system (Mac or Windows).
Regards. -
My iphone won't download apps when connected to wifi or 3g, this includes apps previously on the phone any ideas?
It goes to download then stops just showing the cloud and arrowYes we are connected. I even tried by connecting to the computer thru iTunes. It is not working for either of us. Just says unable to download at this time. I was able to connect and restore my apps from my old iPhone buy it won't let me add new ones for do update on the old apps.
-
I use firefox 3.6.22 and google chrome, my google chrome works perfectly so i know my internet is connected, but when i try to use firefox, i am unable to connect or go into any website. I need to be able to use this firefox for fafsa thank you.
Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content? -
I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?
Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Maybe you are looking for
-
JDBC Connection pool recovery after DB server restart
I am finding that Kodo is throwing the following exception after I restart my database server (mysql). I am doing the database server restart while my application server is idle, so it is not during a transaction. Communication link failure: java.net
-
When i click on the download itunes 7.0 it just says thank you but...
it doesnt show up on my computer or show any change! What do i do at the thank you page or whatever
-
Idoc to jdbc mesage spliting using bpm
hi all I have scenario in which i have to send message from one idoc to 3 oracle table. but i have one condition for table 3. that if the primary key of table empty than message should not pass and should not give error message in sxmb_moni.
-
Just wanted to post the following. If you are trying to put together a low cost workstation with decent performance. The 890GXM-G65 is a really good choice. On-board video, am3 / am3+ socket, micro-atx with a cost just over $100. Just installed two i
-
Hi All, I would like to know if we can add custom WD ABAP applications to the ESS/MSS portal which uses standard Java iviews? If this is possible then how can we transfer the data between a Java iview and a ABAP iview? Thank you, Reddy