Unable to connect to MS Exchange server on ipad4 after upgrade to iOS 7.1.2

I received a new iPad 4 through work.  Upgraded to iOS 7.1.2, but now I'm not able to connect to the Exchange server.  Contacted IT through work, they have no idea how to correct it.  They say all of my settings are fine.  The error message says "Cannot Get Mail   The connection to the server failed."  Any thoughts?

Hello harrisk927,
It may help to remove and readd the account on your device.
Tap Settings > Mail, Contacts, Calendars.
Tap the affected email account.
Tap Delete Account.
Add your account again.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen

Similar Messages

  • Unable to connect to the Exchange server using HTTP/HTTPS protocol.

    hi,
    i try to connect microsoft exchange server, but it give me
    error
    Unable to connect to the Exchange server using HTTP/HTTPS
    protocol.
    my code is pasted below............
    <!--- connection parameters --->
    <cfparam name="user1" default="uHRH">
    <cfparam name="user2" default="uHRH">
    <cfparam name="password" default="uHRH">
    <cfparam name="exchangeServerIP" default="192.168.0.1">
    <cftry>
    <!--- Open a connection to the exchange server by
    specifying the required user credentials --->
    <cfexchangeConnection
    action="open"
    username ="#user1#"
    password="#password#"
    server="#exchangeServerIP#"
    <!--- protocol = "http"--->
    connection="conn1">
    <cfoutput>Connection to exchange server
    "#exchangeServerIP#" established</cfoutput>
    <!--- Close connection to exchange server --->
    <CFExchangeConnection
    action="close"
    connection="conn1">
    <cfoutput>Connection to exchange server
    "#exchangeServerIP#" terminated</cfoutput>
    <!--- Error Information --->
    <cfcatch type="any">
    <cfoutput>#cfcatch.message#</cfoutput>
    </cfcatch>
    </cftry>
    if any one know how to solve this error?

    Hi,
    The "<cfexchangeConnection>" tag supports both "HTTP"
    and "HTTPS" connection.. So Please make sure the username has the
    "Outlook Web Access".
    Also try removing the <!--- protocol = "http"--->
    comment which you placed inside the "<cfexchangeConnection>"
    tag.

  • Exchange mail cannot work after upgrade to ios 8.3

    just upgraded the ios to 8.3 yesterday, and the exchange mail could not work since then. no luck even after deleting and re-add the account.
    anyone facing the same problem?
    i will never trust Apple next time to upgrade the new OS at the first day.
    iPhone 6

    I have exactly the same problem. When I make a change in Settings Exchange checks itself off implying that it is working, but I keep getting "Cannot Reach Server" message whenever I try to get email.
    I have become very leery of accepting the new IOS upgrades. There is always a problem.

  • Unable to connect to an Exchange Server iPhone 5

    While I am able to go through the setup and get no errors, when I actually try to get mail it shows "Connot get mail, the connection to the server failed".
    I am on my companies wifi.  this is the first new iphone 5 i have tried to setup.  All previous models are working fine.
    Suggestions?
    Thanks,
    Bill S.

    OK,
    So here is the latest: ANY iPhone 5 (tried four different phones so far) on Verizon is not working on Exchange at my office. 
    HOWEVER, any AT&T iPhone 5 WILL (three added with no issues!) work with the same settings!
    WHY is there a difference!?
    At a total loss here...
    Edit:  I'll add that when putting in the Exchange settings, all went well and each setting had a green check next to it at the end.
    However, when trying to access the mail, the error is: cannot get mail. The connection to the server failed.
    Thanks,
    Bill S.

  • Unable to connect to the MS Exchange server after upgrading to ios 7.1.2

    I received a new iPad 4 through work.  Upgraded to ios 7.1.2, but now I'm not able to connect to the Exchange server.  Contacted IT through work, they have no idea how to correct it.  They say all of my settings are fine.  The error message says "Cannot Get Mail   The connection to the server failed."  Any thoughts?

    Appears to be a wifi connection problem. Did it work prior to the iOS update?
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Since it's a company wifi, you won't be able to do many of these.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How to Change Your iPhone’s (iPad’s) DNS Servers
    http://www.macinstruct.com/node/558
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Unable to connect to local Exchange 2013 server when opening Exchange Management shell

    Hi Everyone
    Yesterday evenything was working fine, and then this morning, I`m unable to establish a connection with the Exchange shell. I receive the following errors. Any help is appreciated.
             Welcome to the Exchange Management Shell!
    Full list of cmdlets: Get-Command
    Only Exchange cmdlets: Get-ExCommand
    Cmdlets that match a specific string: Help *<string>*
    Get general help: Help
    Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
    Show quick reference guide: QuickRef
    Exchange team blog: Get-ExBlog
    Show full output for a command: <command> | Format-List
    Tip of the day #55:
    Want to view the mounted status of all mailbox databases? Type:
     Get-MailboxDatabase -Status | Format-Table Name, Server, Mounted
    VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
    New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
    New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
    New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
    New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
    New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.:
    VERBOSE: Connecting to .
    New-PSSession : Cannot bind parameter 'ConnectionUri'. Cannot convert value
    "http:///powershell?serializationLevel=Full;ExchClientVer=15.0.516.32;clientApplication=ManagementShell;TargetServer="
    to type "System.Uri". Error: "Invalid URI: The hostname could not be parsed."
    At line:1 char:30
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    +                              ~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidArgument: (:) [New-PSSession], ParameterBindingException
        + FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.NewPSSessionCommand
    [PS] C:\Windows\system32>
    Ernie Prescott
    Updated information.
    I can succussfully connect to the exchange powershell from a remote computer, using this method.
    $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri
    http://<FQDN of Exchange 2013 Client Access server>/PowerShell/ -Authentication Kerberos
    Import-PSSession $Session
    So the problem is localised on the server.
    Regards

    Hi
    Try the steps for Error 1 on this link
    http://www.petenetlive.com/KB/Article/0000477.htm
    Hope it will help
    Cheers
    If you have any feedback on our support, please click
    here
    Zi Feng
    TechNet Community Support

  • Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

    Hi all,
    From time to time (at least once a day), the following message pops up on the user's screen:
    "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
    If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
    Any ideas?
    Thank you in advance

    Hi,
    For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
    Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
    http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
    Thanks,
    Angela Shi
    TechNet Community Support

  • Outlook is unable to connect to the proxy server.(Error Code 10)

    Hi,
    I had problems with RPC proxy, I was trying to setup cutover migration.
    So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
    But after this change my outlook was not working anymore
    The settings before the change were:
    Name                          Server                        CertPrincipalName             TTL
    EXCH                                                                        
                 1
    EXPR                                                                        
                 1
    WEB                                                                          
                1
    So I set this back to the original (above) but this didn't helped...
    Outlook 2013 and Exchange 2013
    There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)

    Hi,
    Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
    If possible, please run the following command for double check:
    Get-ExchangeCertificate | FL
    For Autodiscover service, please run
    Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
    If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
    http://support2.microsoft.com/kb/940881/en-us
    Regards,
    Winnie Liang
    TechNet Community Support

  • Outlook is unable to connect to the proxy server. (Error code 0)

    Hello,
    I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
    As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
    I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
    OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
    being reconfigured to https://legacy.company.com automatically.
    My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
    There is a problem with the proxy server's security certificate.
    The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
    Outlook is unable to connect to the proxy server. (Error Code 0)
    If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
    I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.

    Hi,
    Please refer to the following article :
    http://support.microsoft.com/kb/923575
    Cause:
    This issue may occur if one or more of the following conditions are true:
    The connection to the  server requires a certification authority (CA).
    You have not trusted the certification authority at the root.
    The certificate may be invalid or revoked.
    The certificate does not match the name of the site.
    A third-party add-in is preventing access. 
    Solution:
    To examine the certificate, follow these steps:
    In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
    https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
    Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
    Double-click the padlock icon that is located in the lower-right corner of the Web browser.
    Click the Details tab.
    Note the information in the following fields:
    Valid to
    The Valid to field indicates the date until which  the certificate is valid.
    Subject
    The data in the  Subject field should match the site name.
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

    Hi All
    Exchange Server - 2013 CU2 (Windows 2012 Standard)
    AD Server - 2003 R2 SP2
    exchange-svr01.domain.com - internal name
    mail.company.net - external name
    When users opened Outlook 2010, they will encountered
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)"
    I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
    The RPC/HTTP test completed successfully.
        Validating the certificate name.
         Certificate name validation failed.
         Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
    Testing SSL mutual authentication with the RPC proxy server.
         The test passed with some warnings encountered.
    The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
     please help.

    Hi PS CL
    [PS] C:\Windows\system32>Get-OutlookAnywhere
    RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
    ServerName                         : exchange-svr01
    SSLOffloading                      : True
    ExternalHostname                   : mail.company.net
    InternalHostname                   : exchange-svr01.domain.com
    ExternalClientAuthenticationMethod : Negotiate
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    XropUrl                            :
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
    Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
    ExtendedProtectionTokenChecking    : None
    ExtendedProtectionFlags            : {}
    ExtendedProtectionSPNList          : {}
    AdminDisplayVersion                : Version 15.0 (Build 712.22)
    Server                             : exchange-svr01
    AdminDisplayName                   :
    ExchangeVersion                    : 0.20 (15.0.0.0)
    Name                               : Rpc (Default Web Site)
    DistinguishedName                  : CN=Rpc (Default Web
                                         Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
    Administrative
                                         Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=domain,CN=Microsoft
                                         Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
    Identity                           : exchange-svr01\Rpc (Default Web Site)
    Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
    ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
    ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
    WhenChanged                        : 8/17/2013 10:14:55 AM
    WhenCreated                        : 6/25/2013 1:47:50 PM
    WhenChangedUTC                     : 8/17/2013 2:14:55 AM
    WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
    OrganizationId                     :
    OriginatingServer                  : ADserver.domain.COM
    IsValid                            : True
    ObjectState                        : Changed

  • N8 Email - Unable to connect to mail service serve...

    I have my Nokia N8 for a good few months. Email stop sync-ing so deleted my 1 and only email account (Hotmail) and now I can not get any email back.
    I have played with internet settings, rebooted my phone but still nothing.
    Basically, this is what happens:
    Got to set up email
    Some text comes up about what mail can do and you have the option of start of exit
    Press start, and it says preparing for set up, then it comes up with Unable to connect to mail service server. try again later.
    The next options I have are to enter email and password or cancel.
    If I enter email and password it comes up with an option to click on mail for exchange and I have to start entering user name, domain, etc or I can exit.
    So, can anyone help me restore the email function. When I got the phone you had an option of hotmail, yahoo, etc etc. And that is what I want back.
    Also I should mention, I don't have any options around pushing or pulling email as it never gets that far into setting up email.
    I live in the UK, so was wondering if I should just take it into my local carphone warehouse who deal with Nokia support and demand it gets repaired? It's part of what I paid for so they should repair/replace for me?
    Any advice would be good,
    Thanks
    Vicki
    Solved!
    Go to Solution.

    For the answer of both how and why please refer to the post by Abi99 earlier this week:
    http://discussions.nokia.com/t5/Symbian-Devices/qu​ot-Unable-to-connect-to-mail-service-server-quot-o​...
    Please click the star below that post to draw attention to the expired Nokia certificate, which Microsoft Mobile Oy must renew to solve the problem! - Also use the false username and false password trick, if it is a first time mail setup on a freshly reset Symbian phone, to avoid any Nokia Messaging clutter, and then input server details manually.
    EDIT: The expired certificate was renewed is now valid until 2015-07-10
    Hans

  • BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

    Hello Experts,
    I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
    I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
    Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
    But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
    Database error: Unable to connect to SAP BW server Incomplete logon data -
    If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
    I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
    Desired outcome:
    I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
    Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
    Any help in this matter would be greatly appreciated.
    Thanks & regards,
    CD.

    Whether your problem is solved?
    We have the same problem in BO Mobile.
    Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

  • Mac computers in the office are not able to connect to our exchange server.

    We started facing this problem about a month ago in our office where the apple computers can not connect to the exchange server via outlook or applemail or anything for that matter. All the other computers can connect to the exchange server with no problems
    and the apple computers can even access the exchange server via OWA but the outlook and applemail apps would not connect to exchange. We have tried even deleting and re-creating some accounts on the apps but they still would not connect. At this point I am
    at a complete loss and I looked everywhere through google to find out if anyone else has faced this problem but to no avail.
    A little background information. This specific problem started happening after there was an un-expected series of power outages to the servers and they were shut down un-expectedly. I personally restored the servers and turned on all the services and made
    sure everything was up and running after the power outages and everything was working fine. Also the first instance of the problem with the mac computers only happened two days after the servers were back up and running again and they had no issues in those
    two days.
    Right now we do not have that many mac users in our offices (only 3-4 users) and I have instructed them to use the OWA in the meanwhile but it is however an inconvenience to them. By now you may have realized that I am not a very experienced server admin
    and I would really really appreciate any help. I extend my thanks in advance for any insight.

    Hi Martin,
    Thanks for the reply.
    Right now I have Apple mail and Outlook installed on my mac laptop and both the applications do not connect to the exchange server. Apple Mail simply does a long process when I give my credentials to create my account and then it gives an error saying it
    could not find the server while outlook quickly tells me that either the username or password is incorrect. At the same time I can connect to the server through outlook on my windows computer without any problems whatsoever.
    From your reply, I gather that the VIA headers only affect Apple mail and should not affect Outlook app on the mac but right now, neither apps are connecting to the exchange server.
    Either way I am trying to find out how to remove the VIA headers because it does not seem that we are using Kemp on the exchange server. Right now I do not have the in depth knowledge that I need because I was not involved in the implementation of our server
    system, that was taken care of by a service provider and I was put in charge of mostly simple admin work. Now we are out of contract with the service provider so  pretty much everything has fallen onto my shoulders.
    If possible, would you mind pointing me in the right direction to finding out if I am using a L7 load balancer and how I would go about removing the VIA headers?

  • Hi - for some reason, my IPAD3 mail client has decided it can no longer connect to my Exchange server.

    Hi - for some reason, my IPAD3 mail client has decided it can no longer connect to my Exchange server.  It's worked like a charm for weeks.  Any thoughts?
    For the record, I've got a POP mail account that is working fine on the machine and the WIFI is up and running (Safari is loading fine).
    Thanks

    Hi Jim,
    Your issue is the most FAQ in the forums, it is an ongoing problem with Tiger waiting to be fixed by Apple. Till then, forget your aliases and use either Command-K or from the Finder Go-->Connect to Server and enter the remote Mac's IP address to connect.
    Also, Open Utilities-->Terminal and type lookupd -flushcache (Press Return) and reboot. Do this for both macs.
    Macs running 9.x, Macs running 10.4.x, SGI workstations running Irix 6.5.x

  • SSRS 2012 with SharePoint 2010: Unable to connect to the remote server

    We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
    sharepoint mode).
    I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE.   For reference, I have 1 WFE and 2 App Servers.  the WFE has the Reporting Service Add-in and both App Servers have
    the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
    I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
    It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed.  I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is.  Still can't
    find it anywhere.  None of the Reporting commandlets are helping.
    Technically what is occurring;
    Add Reporting service content types and create a New Reporting Data Source through UI
    ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
    Exception occurs after some time because it times out trying to connect to wrong host.  Exception below:
    Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
    -- End of inner exception stack trace ---
    at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
    at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
    No powershell commands or any of the settings in the service application allow me to set this.  Any help would be appreciated.
    20 Bay Windows Home Server (Not Vail!)
    http://piroozjavan.blogspot.com/

    Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for

  • How to link Interactive fields in Acorbat 9Pro?

    Hi Im new in this and I would like to now how to link interactive fields in acrobat. lets say that I have 10 files (File1, File2, File3 etc......) and each file have the same  COMBO BOX that display 5 options (option 1. option 2, option 3, option 4 a

  • Want to remove Lossless files from dual-format library, keep elsewhere

    My iTunes library consists entirely of music ripped from audio CDs. Each CD was ripped twice, once in Apple Lossless format, once in AAC format. For several reasons (chief among them the desire to free up a lot of disk space on my iMac), I want to re

  • Windows Sharing Password.. Lost / Forgotten.. Administrator account..

    HI.. I thought i would connect up my old G3 iMac running 10.4 Tiger to my Win7 laptop via ethernet crossover and move everything over i wanted to save by browsing the files and folders. Connected the iMac and the laptop and i can work from the iMac s

  • Bridge fails to open

    After an update, yesterday, to Bridge CC it now will not open

  • Column Width

    We are currently running Version 6.70.190 SP:00 PL:31 When I go to write a PO I open Modules / Purchasing AP / Purchase Order to open the form and go to the Item tab. The columns that I need (Item Description, Item No. etc.) are too small to type in.