Unable to create a share on file cluster

I am having problems creating a share on a new 2012 file cluster. I keep getting an error message that "The resources must be online on the same node for this operation". The disk is online according to disk management and residing on the node
on which I am trying to set this up. How do I get around this message?

Hi,
Before going further, how did we create the cluster file server? Did we follow the following checklist?
Checklist: Create a Clustered File Server
http://technet.microsoft.com/en-us/library/cc753969.aspx
Besides, regarding creating a shared folder in a clustered file server, the following article can be referred to for more information.
Create a Shared Folder in a Clustered File Server
http://technet.microsoft.com/en-us/library/cc732302.aspx
Best regards,
Frank Shen

Similar Messages

Unable to create the test suite file

Hi,
I imported a BPEL project to my JDeveloper ver 10.1.3.3.0. When I clicked on the <project name>.bpel, I got the
"unable to create the test suite file" error and all the partnerlinks have a bang sign (!). None of the partner link works.
Please help,
Thanks,
Amorsolo

Probably you might want to post it in the BPEL forum.
BPEL
-Arun

Unable to create the test suits file!

Dear Experts!
Getting the "Unable to create the test suits file!" error while opening .bpel file in JDeveloper 10.1.3.5. Also, all the partner links showing warning symbol. When I click on them, getting the following error:
ERROR:WSDLException: faultCode=INVALID_WSDL: Invalid XML in document at: Start of root element expected.
Looks like partner links are not mapped correctly. Could you please throw some light, where I need to fix the issue.
Appreciate your help.
Thank you.

I had similar issue sometimes back, error was because sample xml my test was using wasn't conforming to my code. In my case, I didn't write test suite so deployment was successful and was getting error while testing post deployment. In your case, test suite will execute.
Try to follow your xslt mapping or any xpath statements within bpel flow, it must be having direct mapping of some element from source but your sample input xml might not be having that element and hence resulting in error. Try iterative debugging by adding more elements in input xml.
Regards,
Ankit

Unable to create an executable jar file

Hi,
I am unable to create an executable jar file,
I am using the command as follows:
C\> jar cvfm MyJarName.jar manifest.txt Demo.class
where as Demo.class has appropriate main method; manifest.txt contains [ Main-Class: Demo ] and a new line
Please help.
thanks & regards
M K Rayapudi
Edited by: R6i on Apr 30, 2009 5:15 AM

Your jar is perfectly generated, but your machine has a problem with .jar file associations.
You have two options:
1. Play with the registry. Dangereous if you are not used to.
2. Reinstall the jre.
Just to verify my theory, open a command prompt and the command:
reg query HKCR\jarfile\shell\open\command
What does it say? I have executed your command , here is the output
HKEY_CLASSES_ROOT\jarfile\shell\open\command
(Default) REG_SZ "C:\Program Files\Java\jre6\bin\javaw.exe" -jar "%1" %*I am not getting anything from this command, can you please explain clearly.
thanks & regards
M K Rayapudi
Edited by: R6i on May 3, 2009 10:18 PM

Unable to create the creative cloud files folder.

I get this message when I try to sync files to Creative Cloud folder:
I have tried the options, and to close the program and restart the computer, but no luck.

Hi,
This looks like Creative Cloud is unable to create the Creative Cloud folder is your user home folder, are you certain that this location is 100% writable? there are no permissions stopping programs writing to this location?, its unusual that your Creative Cloud folder is missing, you must have manually moved or deleted it.
Thanks
Warner

Unable to create a share

When I am trying to create a share I receive the following error message "An error occurred whgilw trying to share C. Incorrect function. The shared resource was not created at this time.". I am signed on as a user with Admin rights and I am using Windows
7 Ultimate Edition 64bit. I am on a network with no domain. If someone could help I will be very greatful.
Rick Herritt [email protected]

Hi,
As this thread has been quiet for a while, I assume the issue has been resolved. At this time, we will mark it as "Answered". If the issue still persists, please feel free to
reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer as you wish.
BTW, we'd love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Niki
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Niki Han
TechNet Community Support

Unable to create PDF from dwg Files

Hi All,
I suspect this question is old hat but if anybody can provide a solution it would be greatly appreciated. Acrobat 8.3.0 professional edition Windows XP sp3.
It used to work a long time ago but when I try to convert a dwg to PDF the message "An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF". I looked at the "create PDF" options in preferences and only security options are shown for Autocad files so I know something is amiss.
I have tried adding a printer using the ini file in the xtras folder in Acrobat and when I look at printing preferences (before and then after the install) all the boxes are blank - again an indication something is wrong?
I have tried the repair function in the control panel - still no good.
Any (polite) suggestions other than buying X?
Many thanks

Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

Unable to create Magnetic Media xml file.(Able to see Business No Summary)

Dear All,
I am trying to create Magnetic Media File of T4 forms to submit to CRA. I could successfully do this in Sandbox machine but when I tried the same in QA after simulating the year end updates the same way as they were in Sandbox .... it doesnt work in QA.
I am able to view the Business summary with the Total amounts of deductions. It says 10 slips successfully produced. When I go check the downloaded xml file, I am unable to view the 10 files data in the xml file.
Can you let me know what might be the possible reason?
Regards,
Rani

I could solve it myself by downloading recent CRA files.

Magic GarageBand unable to "Create Project" -- Missing .caf files

I bought the new iMac on August 7th which came preinstalled with iLife 08.
The rest of garageband works fine, to my knowledge, but the Magic garageband feature does not. I can "Audition" a song and choose all the instruments just fine, but when i click "Creat Project" i receive multiple warnings about it being unable to locate .caf files for each instrument. I end up clicking continue on each warning until i'm finally presented with the main multitrack view in garageband. There are tracks for each instrument, but unfortunately no musical data...so it appears as though the files which contain the tracks of each instrument are for whatever reason missing.
So the first thing i thought was that garageband wasn't installed correctly from the factory, so i reinstalled it using the included disks that came with my imac. the installation completed successfully and i went to run magic garageband again, but the error messages still come up.
Any ideas?

I think I am running into the same problem with a different setup. My students log in to the computer using a network account so their files are saved to a server in my office and not to the machine that is hosting Garageband. I think this approximates the situation that khkremer is talking about and my students have the same problem, not just with Magic Garageband but with voice tracks in a podcast. They just disappear. We've been recording the voice tracks in another sound editing program and re-insert them every period they work on their podcasts. It's a pain and I agree, a bug. Let's hope they fix this problem or I think I will have to stop using the program.

Unable to create cofile from data file

Hi All,
I am trying to create a cofile with the commane **** tp createcofile <TR>**** and getting the following error .....
---> tp CREATECOFILE DC1K900012 pf=/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL
This is tp version 372.04.65 (release 701, unicode enabled)
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/DC1KK900012.DC1: Not a directory
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/SLOG1021.DC1.LOC: Not a directory
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG1021.DC1 for more details)
Please help with the syntax of creating a cofile ....
Thanks in Advance.
Regards,
Revanth Kumar

It may be because of TRANSDIR profile entry pointing to /usr/sap/trans/bin/TP_DOMAIN_DC1.PFL instead of /usr/sap/trans.
its not able to access tmp folder under the trans file system.

Unable to create CIFS share in NSS4000 after upgrading firmware

Hi,
Hopefully someone can help.
Today I have upgraded the firmware of an NSS4000 ( i wish i hadn't) to the latest 1.16 version.
As it seems I was not able to connect to this server anymore using SMB share CIFS. When i looked under shares I noticed that CIFS was unselected. Went in an selected it back on and hit update. Went in again and found that again it had disappeared and only leaves FTP as selected.
Anyone any ideas on how i can tackle this issue? Have been browsing the web for answers for hours with no luck!!!
Thanks, Mo

Welcome to Cisco Community, hope we are able to correct this problem with you.
When you updated the FW, did you run the update twice, and follow the on screen instructions after reboot, stating to flush the browser cache? It really seems like we either are seeing bogus information due to cached pages, or we have corrupted the config. If possible, please post the log files from your NSS to see if we are able to see what is failing.

Unable to create package shares on distribution points

For any OSD packages in our environment (like images, driver packages, etc) I always check the option "Copy the content in this package to a package share on distribution points", so that we are able to run content directly from the DP's in a task
sequence instead of downloading it first to clients. But I've noticed now that for any new package I create, the package shares aren't being created thus my OSD tasks are failing due to missing content. When I check the copy content option for a new driver
package and monitor the distmgr.log, here is what I see:
Copying package DEV0007F to the package share location \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F on the server ["Display=\\hou-sccmdp03.network.local\"]MSWNET:["SMS_SITE=YYC"]\\hou-sccmdp03.network.local\   SMS_DISTRIBUTION_MANAGER
4/3/2013 11:02:35 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:35 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:40 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:45 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:50 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:55 AM   2156 (0x086C)
Failed to set security on \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F for package DEV0007F   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:03:00 AM   2156 (0x086C)
That same sequence of errors is repeated for every distribution point we have. I checked the sharing permissions on the SMSPGKE$ and SMSSIG$ folders on the DP and everything looks correct. I only started noticing this issue after our SP1 upgrade, but I can't
find anything from Microsoft saying this is a known bug or how to fix it. This is also affecting new distribution points that we created after the SP1 upgrade, so I don't believe going down the remove/reinstall of all the DP's route will work. Any suggestions?

Copying package DEV0007F to the package share location \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F on the server ["Display=\\hou-sccmdp03.network.local\"]MSWNET:["SMS_SITE=YYC"]\\hou-sccmdp03.network.local\   SMS_DISTRIBUTION_MANAGER
4/3/2013 11:02:35 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:35 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:40 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:45 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:50 AM   2156 (0x086C)
SetObjectSecurity failed; 0x80070002   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:02:55 AM   2156 (0x086C)
Failed to set security on \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F for package DEV0007F   SMS_DISTRIBUTION_MANAGER   4/3/2013 11:03:00 AM   2156 (0x086C)
I've seen similar errors after installing SP1:
Failed to set share security on share \\DP.domain.tld\SMSSIG$. Error = 5
Failed to set access security on share SMSSIG$ on server DP.domain.tld
DPConnection::Disconnect: Revert to self
Cannot find or create the signature share.
Solution for that case: Use the computer account instead of a site system installation account:
That might fix it.
Torsten Meringer | http://www.mssccmfaq.de

Unable to create cd from Image file

I downloaded the Solaris 8 for Intel, unzipped the files. I have been unsuccessful creating an image file for the file sol-8-1_01-fcs-bin-ia-v1. I have tried various CD writing applications.
I was able to create images from the other files.
Thanks

You are not supposed to create an image file from the unzipped data. These unzipped files are image
files! You just have to rename them using the proper file extension so that your CD-R burning software
recognizes them as cd image files. (common extension are .ISO or .RAW; check with your CD recording
software)

Unable to create PDF from Publisher file

I am able to create .pdf from a .jpg, also from an .xls ... but not from a Publisher document (2007).
I get a prompt to run in repair mode and I tried that (twice) but the problem is not being corrected. At one point I had a message about PDFMOUTLOOK and thought I disabled it. I tried both ways, from inside Publisher, and dire Any help will be greatly appreciated.ctly from Adobe Acrobat 9 Pro ... neither works.
Below is the log:
%%[ ProductName: Distiller ]%%
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
-169
-mark-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
LinK

Interestingly, "PDFMOUTLOOK" is apparenly related to PDF Maker for Outlook. It has also been suggested to be Malware (not good). That would suggest you may have some corruption. I am not saying you do, but just what is hinted at by a web search.
In terms of the printing process. The Adobe PDF printer creates a PS file. With Acrotray active, this PS file causes Acrotray to activate Distiller in the background and complete the conversion of the PS file to PDF. That is the basic conversion process used by Acrobat to create PDF files. Distiller is always in the picture, it just may be running in the background. If Acrotray is not active, the process will stall. Since you are seeing a Distiller log screen, your process seems to be working.
PDF Maker is basically a preprocessor for the Adobe PDF printer. The preprocessor inserts PDF Marks into the PS file that is created to allow the conversion to PDF to include bookmarks, links, etc. My suggestion about PDF Maker (since the print process seems to work) is that there may be something in PDF Maker that is causing the problem. From the web search, it appears it may even be a virus type of aspect that hit your PDF Maker. Again, I am not saying that is the case, only suggesting it as a possibility. If you can create the PDF from the printer, then the basic process of creating PDFs is working and it is then a process of checking out the problems with PDF Maker. For that, I typically suggest turning all of the options off and then adding them back in to see what triggers the problem. You are basically in a trouble shooting mode and need to isolate the problem.

Export problems - Error compiling movie - Unable to Create or Open output file

I've got a weird one here. I cannot export projects to my main render Raid-0 harddrive, but I can to any other drive.
This is not unique to Premiere. It's happening to me in AE and Cinema 4D, so I'm sure it's not an Adobe problem. But I'm posting it here in hopes that someone could help me figure this out. I've never run into this before.
I recently was forced to reformat my harddrive and reinstalled everything due to a harddrive failure. Reinstall of Windows 7 Ultimate and every other software went as expected.
My drives look like:
B: 2TB drive
C: 2TB drive has opperating system and CS5
R: is a 3-disk (3TB ea) Raid-0 (my main render drive)
S: 15TB NAS
T: 15TB NAS
I can render from C4D/AE and export from PP to ANY drive other than my R:\. When rendering to R:\ I always get a message like this (this happens to be from Premiere/AME):
I ensured my file permissions on R:\ were set to "yo, let anyone on this computer do whatever the heck he wants; got it, Winny?" but that didn't do it.
Any other suggestions?
I'm able to work, but can't render to the right drive. I can render to another drive and copy the rendered file over through Windows, no prob. Just rendering/exporting ain't working on any program.

I think I have identified my problem here. I will post the info for anyone else stumbling here in the future.
I belive it was my Raid box (Rosevwill RSV-S4-X) and/or controller card that was acting stupid. Not sure exactly what was going on. I could read/write from/to it all day long, but something about it didn't like things rendering to it. I would still like to know what the heck it's problem is since I will just migrate this box/controller back into our company "system." The laste bloke's computer this was on didn't seem to mind it at all. Computer picky? Don't know. It even worked on mine before the reformat and reinstall of Win7.
I installed a Sans Digital box and my computer just loved it and accepted it right into the family. Whew!
Not a solution, but if you have a Rosewill box and/or card, that's the first place I'd look if you're having a problem.
I mean, with a splash page like this, it's amazing it even worked AT ALL! Ya should'a seen the "interface" (notice the quotes).

Unable to create a share on file cluster

Similar Messages

Maybe you are looking for