Unable to create a Wiki - System Error!

Hi,
I have been trying to add a couple of child pages to some parent (main) pages.
I can enter the page name and enter the text (say).
When I click on save it gives me an 'system error!' message.
What could be the cause? Is there anyone who also is getting that error or it is just confined to me?
Best regards,
Harsh Dave

Thanks Hilit for your efforts!
Hilit wrote: 1. I've checked the permissions of the "The new Enhancement Framework and the new kernel-based BAdI" Wiki, you are supposed to able to edit it. This, in addition to the fact that you had managed to edit it before, leads me to think that maybe it was a temporary bug. Did you try to re-edit it after a couple of hours/days?
1. I tried to re-create wiki couple of times after the first time I encountered that situation. Since a week, I am trying daily but the situation remained same as before.
I hope that should be a temporary 'bug'.
Hilit wrote: 2. Regarding the other Wikis- can you recall whether the "The new Enhancement Framework..." and the "BTE - Business Transaction Event" were child pages of "Enhancements and Modifications...." also before you had this error? (i.e. when you managed to add the child pages in earlier times) ? In other words, is it a part of your error or was this said regardless?
Also, please note that the child page of "Enhancements and Modifications...." is actually a COPY of "The new Enhancement Framework...".
2. The wikis in the second point. I did not see that before as I attempted to add child pages recently and not anytime earlier. So, I am unaware of the situation that time .
This is the first time I am adding as child pages under "Enhancements and Modifications..." and "BTE - Business Transaction Event"
If you need more clarifications please give feedback!
Hilit wrote: since we're heading on our Passover Break
Have a nice break!
Any updates or possibilities?
Best regards,
Harsh Dave
Edited by: Harsh Dave on Apr 13, 2009 4:01 PM

Similar Messages

Windows 7 Setup was unable to create a new system partition

I had windows 7 ultimate installed on a raid striping configuration and one of the hard drives crashed. I bought a new hard drive (WD Caviar Black 1TB) and when I went to reinstall windows 7, I got an error message saying Setup was unable to create
a new system partition blah blah blah. I did a lot of searching around for an answer, wondering if 1TB was too big of a hard drive to do a fresh install on, whether it was formated correctly, etc...
What I eventually found to be the solution was to go into the BIOS and change a setting. Somehow when my old hard drive crashed, the boot priority for hard drives automatically changed so that the first boot priority was one of my external hard drives.
After I changed the boot priority so that the first priority was the hard drive I wanted to install windows 7 on, the installation went smoothly. I think that's why other people had success after removing all external hard drives. After a
couple of reboots the boot priority most likely automatically updated to reflect which hard drives were actually connected.
Anyway, I had a hard time finding this answer, it was frustrating beyond all belief, and I wanted to make it easily available in case it helps anybody else out in the future.
Andy Mykrantz

Hi.
Thanks for sharing the information here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Acer aspire 5733 windows 7 intel core 13 inside, setupwas unable to create a new system partition orlocate an .......

i woke up today to see my laptop asking for a current password i entered
then it was asking
please input password for st9500325as
and nothing seems to be working
i tried to reboot the system and then the error message displayed in the title comes when i click next screen asking fro where do you want to install windows, i havent connected anything on the laptop and just
1 disc0 unallocated space 465.8gb
and i cant partition it also
i clicked on drive option and clicked on new( thets the only one i can click from the options) and it waited for some time as it is trying to do something and telling me failed to create new partition, what can i do. [laese explain in astep bt step
procedure,
i am not a genius on laptops or computer

Hi,
Quote: setup was unable to create a new system partition or locate an existing system partition.
It can be caused by corrupt partition table.
Boot from Windows installation media, press Shift + F10 at setup screen, and run chkdsk command to fix drive error.
http://technet.microsoft.com/en-us/magazine/dd637756.aspx
Also, please remmember to mark your system partition as active using diskpart command, if you do not have a system reserved partition.
http://www.sevenforums.com/tutorials/71432-partition-mark-active.html
NOTE This response contains a reference to a third
party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Andy Altmann
TechNet Community Support

Windows 7 Ultimate isn't installing on my iMac. Setup was unable to create a new system partition or locate an existing system partition

I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
These are the steps I followed
I selected all the options since I didn't have the drivers or an install disk
it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
I selected a partition size - I gave windows roughly 100GB
and I let it install
Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
WHAT DO I DO?

I had to read the apple instructions several times before they started to make sense. I burned my iso onto a DVD and had the required USB for support software. Are you trying to use the single USB method?
This article has a lot of info on the single usb method

Boot Camp - Setup was unable to create a new system partition....from Windows install

Hi folks. So I ran the boot camp wizard and made a USB install key for windows from that. I boot to it and everything works until I get to the install. I format the Boot Camp partition as indicated in the walkthrough and then I get "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." from the Windows installer. What do I do? Thanks.

just to add to the mix. . . i just got a new macbook retina.
Originally used a USB flash drive. Hit the same barrier described here.
Spent a few hours with drive unplugging / replugging silliness. No progress. Went back into OSX to attempt using an external DVD drive. There is no option for that in Bootcamp assistant now - must use USB.
Grabbed a different USB stick and started again. This time I used the other USB port on the macbook (the one on the left). Everything worked fine this time!?
You still have to go into "advanced options" and hit "format" when you get to the partition screen.
Moral of the story: different stick, different port. Sounds random. If that doesn't work, try changing your socks and putting on a hat.
Good luck!

Bootcamp windows 7 setup was unable to create a new system partition

I've been trying to load Win 7 sp1 64 for a week. Tried 4 versions, all 64b, made a new USB drive each time, I always get stuck in the same place:
"setup was unable to create a new system partition or locate existing system partition". I've tried everything, read MANY forums.
I read format in set-up many times, but it matters not! HELP!

Restart your machine and do a pram reset (google)
Open disk utility and repair permissions twice, also you should only have 1 partition
Then try boot camp assistant again
If this doesn't work, you'll need to either clean install OSX or have a terminal disk wizard from here try and help

Unable to create New Business System

Hi
I Installed XI 3.0 and configuring as per the configuration guide.
When I try to create Business System (SLD) I get the following error message.
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Steps:
Logon on to SLD
Click on New Business System
Name: XID and click on Next
Technical System Type: Web AS for ABAP
Select System: XID on Hostname   and select Client
Installed products: Choose all and click Nextt
Integration Server:
Business System Role: Integration Server
Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
How to create a Business system and assign the role of Integration Server?
Thanks for the Help
Raghu

Hi RG,
      Once we had   same error ,due to some reason business system with role integration server deleted.
       It has been resolved by deleting XI technical system and recreating same after that it allows to define new bussiness system with role as integration server .
It might help you.
Regards
Santosh

Unable to continue: hardware or system error

Hello,
I tried starting up PE8 today, and received this message:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
This only occurs while opening "Edit," but not "Organize."
I'm fairly certain I know what has caused the error - I uninstalled an old trial version of Premiere Elements the other day, just to clear out some space on my computer, and I'm guessing that uninstalled something that shouldn't have been uninstalled, something that was also used by Photoshop Elements.
I have already tried the resetting/deleting the preferences folder.
My version is Photoshop Elements 8.0. My OS is Windows 8, 64 bit. RAM is 8.0 (7.4 usable).
I have a license for two computers, and both licenses are in use.
Is this error really unrecoverable? Any help would be greatly appreciated.

i777k
Deleting the settings file has been known to resolve this type of issue. How did you go about resetting/deleting the preferences folder?
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements. html
Was it the Adobe Premiere Elements 8 Prefs.psp file that you deleted?
Or did you go the Ctrl+Alt+Shift hold down as you clicked (held click) on the Editor tab of the Photoshop Elements 8 Welcome Screen?
What antivirus program do you have? McAfee or other? Have you disabled the antivirus program to determine if that had any affect on the
issue?
If you have not already and nothing else is resolving the issue, consider a deactivation, uninstall, reinstall with a ccleaner run through between the uninstall and the reinstall.
https://www.piriform.com/ccleaner
We will be watching for your results.
ATR

Unable to create shopping cart (multiple errors)

Dear All,
When I try to create the shopping cart, I get the following errors
No Logical System for FI is maintained. Inform system admin.
Enter the company code
No Logical System for FI is maintained. Inform system admin.(2nd time)
Error in account assignment for item1
I have maintained Plant -> Storage Locations -> Extended Attributes in PPOMA_BBP. I got the partner Id from BBP_LOCMAP after running the BBP_LOCATIONS_GET
I have checked the RFC connection from SRM to ECC (R3 system). I am able to get into ECC without the login details
Can you please advise on the troubleshooting steps?
Thanks for your time.

Hello,
Does the user you are testing with have the required puchasing roles?
I have noticed that there are some customizing roles in SU01.
Are the correct attributes maintained in PPOMA_BBP?
Please check table BBP_DET_LOGSYS as it may contains old product
category GUID.
After downloading the customzing object, DNL_CUST_PROD0, in your
system, the GUID created in COMM_CATEGORY table could be different from
the one used in BBP_DET_LOGSYS.
Redo the "Define Backend System for Product Category" in the IMG
and recheck.
Please also verify the business organization settings.
I hope it helps.
Kind regards,
Gaurav
PLEASE GIVE FULL POINTS FOR USEFUL REPLIES

Unable to create a technical system

Hi
I deleted a technical system and try to create the same but it is showing error
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCClient.CreationClassName="SAP_BCClient",Name="620.SystemName.SRD.SystemLicenseNumber.0020471770.SystemHome.dbd106
i tried to deleted the components in content maintainance also(in administration),still i am getting same problem,
what other things i have to do,can anybody suggest
regards
raghu

Hi
Look this similar thread will solve your problem
CIM_ERR_ALREADY_EXISTS

Wiki system errors

In the latest days, I often recieve error messages, when I try to use the wiki. Things like
lib/DbaDatabase.php:54: Fatal[256]: dba_open(/home/judd/public_html/db/wiki_pagedb.gdbm,w): Driver initialization failed for handler: gdbm: Can't be writer
* file: /home/judd/public_html/db/wiki_pagedb.gdbm
* mode: w
* handler: gdbm
lib/DbaDatabase.php:54: Fatal[256]: dba_open(/home/judd/public_html/db/wiki_pagedb.gdbm,w): Driver initialization failed for handler: gdbm: Can't be writer
* file: /home/judd/public_html/db/wiki_pagedb.gdbm
* mode: w
* handler: gdbm

iphitus wrote:why would you use gdbm when theres mysql installed on the server?
The stable branch of phpwiki at that time didn't support mysql. Just dbm files.
Once begun, there was no clear path of migration away from the old format. At least, that is my understanding.
I have been working on a couple of scripts to try dumping the data out of the dbm file. I can dump the plain wiki text just fine. Dumping to html format is a little tricky, as I am not sure the parser I have is working quite right..
I heard a rumor that moin moin has a migration tool for phpwiki, but I have not confirmed the fact.

Unable to Create Query - Run Time Error

Hi All,
I'm try to create a query from a Cube .... the moment I drag 0CALMONTH and restrict it to Varaible Last Year This Month. I receive, the following error "Run Time Error 2147417848 (80010108) ....Automation Error. The Object Invoked has disconnected from its client.
When I check with Event Viewer : The following message appear " ID: 1, Application Name: Microsoft Office Excel, Application Version: 12.0.6324.5001, Microsoft Office Version: 12.0.6215.1000. This session lasted 1784 seconds with 780 seconds of active time. This session ended with a crash."
I'm running Ms Vista Enterprise OS with Office 2007.
Please advise
TQ
Nathan

Hi,
Actually this is a frontend error.
Check the SAP Note Number: 1039191
Download the DLL.
Problem Description: There is a BI bug when we use BW3.5 frontend tool with BI7 datawarehouse workbench.
Symptoms: When you try to restrict an object in Query designer, it will greayed out by giving runtime error.
Solution: Take a backup of wdbspres.dll file which is present under C:\Program Files\SAP\FrontEnd\SAPgui. Copy the original
file with this new file available in project filder. Problem will be resolved.
Regards
Karthik

Boot Camp - Setup was unable to create a new system partition

I'm getting this problem installing windows 7 via bootcamp on the macbook pro retina 13 using an usb drive. I looked up solutions online, and they involved unplugging other usb ports or moving the usb drive from one port to the other. I don't have any other usb drives connected when doing the windows installation, and I tried moving the usb drive with windows setup from one port to the other, but I'm still getting this error message. Are there any other solutions to the problem? Do I have a problem with the USB drive?

Hi Pharotek,
I had the same issue, trying to install Windows 7 on my new iMac yesterday and this morning. I couldn't ever get it to work in any configuration of usb port plugging but I read a lot of those suggestions too. Ultimately, I borrowed an external dvd drive and burned the Windows 7 iso to a dvd. Booting from the external dvd did the trick. To summarize, so hopefully I help others with this terribly-frustrating problem:
Use the Bootcamp Assistant to remove any half-finished windows partition (that should be checking the last checkbox only, to "remove").
Plug in an external dvd drive with a Windows 7 install disk. (Use the Disk Utility to burn the ISO to the DVD if needed.)
Plug in a USB thumb drive, which we will use to hold the Apple support files.Because order seems to matter, on my iMac with 4 usb ports at the back, facing the back of the iMac from right to left I had: external DVD drive, thumb drive, blank, apple keyboard w/ non-apple mouse plugged into keyboard.
Use Bootcamp Assistant:
uncheck option one (we don't need to copy the iso to the thumb drive, since we're using dvd)
check option two (we do want to copy the support files to the thumb drive)
check option three (we do want to install Windows! )
During the install process, if you've been booting from USB thumb drive, you'll likely get a message about making the thumb not bootable. Yes, we want to make the USB thumb drive not bootable now, as we are booting from the DVD and just using the thumb for support files.
Now the installation should work. Select the bootcamp partition, choose advanced, choose to format the BOOTCAMP partition as usual.
Dance around the office (optional.)
I believe the core issue is a unhappy melding of USB 3.0 issues and having a bootable USB thumb drive be the source of installation.
My external DVD drive was an Apple USB SuperDrive.

Error message: unable to create temp. folder. Error 5 - Access is denied.

This comes up every time I boot up Windows 7 (64 bit) Is it something I should be concerned about? How can I get rid of it.
Everything seems to work OK.

Forgot to say I'm using Acrobat 9 pro

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

Unable to create a Wiki - System Error!

Similar Messages

Maybe you are looking for