Unable to create compatible TIFF

I need to create CCITT group 4 TIFF files for an external system. I have done this before, but this new system seems to be really nitpicky. It refuses to use the TIFF produced by JAI no matter what I try, but if I save it in IrfanView it is accepted.
Can anybody give me some pointers to what I can change in the encoding process to make it compatible???
I used "tiffy" to view the metadata tags of the files, and here are the results:
The file produced by JAI:The file size is 20666 bytes.
Intel (little endian) byte order
IFD OFFSET = 8
The number of tags = 16
Tag                       Type   Length   Value
256 Image Width           LONG     1      2475     (9ab Hex)
257 Image Length          LONG     1      3502     (dae Hex)
258 Bits Per Sample       SHORT    1      1
259 Compression           SHORT    1      4
262 Photometric           SHORT    1      0
266 Fill Order            SHORT    1      1
273 Strip Offsets         LONG     438    <206>
274 Orientation           SHORT    1      1
277 Samples Per Pixel     SHORT    1      1
278 Rows Per Strip        LONG     1      8        (8 Hex)
279 Strip Byte Counts     LONG     438    <1958>
282 X Resolution          RATIONAL 1      <3710>   300 / 1 = 300.000
283 Y Resolution          RATIONAL 1      <3718>   300 / 1 = 300.000
284 Planar Configuration SHORT    1      1
293 Group 4 Options       LONG     1      0        (0 Hex)
296 Resolution Unit       SHORT    1      2      The file produced by IrfanView:The file size is 13388 bytes.
Intel (little endian) byte order
IFD OFFSET = 13164
The number of tags = 16
Tag                       Type   Length   Value
256 Image Width           SHORT    1      2475
257 Image Length          SHORT    1      3502
258 Bits Per Sample       SHORT    1      1
259 Compression           SHORT    1      4
262 Photometric           SHORT    1      0
266 Fill Order            SHORT    1      1
273 Strip Offsets         LONG     1      8        (8 Hex)
274 Orientation           SHORT    1      1
277 Samples Per Pixel     SHORT    1      1
278 Rows Per Strip        SHORT    1      3502
279 Strip Byte Counts     LONG     1      13155    (3363 Hex)
282 X Resolution          RATIONAL 1      <13362> 629145600 / 2097152 = 300.000
283 Y Resolution          RATIONAL 1      <13370> 629145600 / 2097152 = 300.000
284 Planar Configuration SHORT    1      1
296 Resolution Unit       SHORT    1      2
305 Software              ASCII    10     <13378>   IrfanView There is a remarkable difference in size. Could this be it?
Or can the IFD offset be the problem?
Or the Strip offset/row/count?
Thanks in advance.
(I could make the TIFF available for download if it's helpful.)

It looks to me like it's a problem with your 'Rows Per Strip' tag.
Read this thread for more info on that: http://forum.java.sun.com/thread.jspa?threadID=5161294&tstart=0
We should be able to help you with your encoding process, but do you want to tell us how you're actually doing it at the moment? Some code would be helpful :-)

Similar Messages

Fax: Unable to create tiff

I am trying to fax to a USB modem connected to another mac which is being shared.
When I try to send a job to the fax, I get the error: "Stopped on Server - Unable to create Tiff Pages"
I can fax successfully from the computer that is serving the fax modem, but not from clients. I've tried faxing with a user logged in the fax server. nothing. Any ideas?

On the client Mac, try this:
instead of adding the shared modem you see in the popup menu after hitting +
Select Add Printer or Scanner and then add it from there.
Mine now works. Whether this was the trick or not, I don't know.
An Apple support rep suggested this.

IPhoto exports some Originals but hangs, saying "Unable to create /Users/

I have a folder of 43 photos, some jpgs but a lot of the Originals are RAW and a couple of large tiffs, too. I'm trying to send them to a graphic designer for use in a book, so I want the highest quality. I would like to export them as Originals, so I don't have to search for each photo individually. The Export Originals process works for three jpgs, then I get Unable to create Users/amyzerner/Desktop/ then the first four letters of the name of the folder to which I'm exporting the photos, which I want to burn to a DVD. If I export them as Jpgs or Tiffs, all works well. Does anyone have any idea what the problem is here? Thanks in advance.

How much free space do you have on the boot drive?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Unable to create cluster, hangs on forming cluster

Hi all,
I am trying to create a 2 node cluster on two x64 Windows Server 2008 Enterprise edition servers. I am running the setup from the failover cluster MMC and it seems to run ok right up to the point where the snap-in says creating cluster. Then it seems to hang on "forming cluster" and a message pops up saying "The operation is taking longer than expected". A counter comes up and when it hits 2 minutes the wizard cancels and another message comes up "Unable to sucessfully cleanup".
The validation runs successfully before I start trying to create the cluster. The hardware involved is a HP EVA 6000, two Dell 2950's
I have included the report generated by the create cluster wizard below and the error from the event log on one of the machines (the error is the same on both machines).
Is there anything I can do to give me a better indication of what is happening, so I can resolve this issue or does anyone have any suggestions for me?
Thanks in advance.
Anthony
Create Cluster Log
==================
Beginning to configure the cluster <cluster>.
Initializing Cluster <cluster>.
Validating cluster state on node <Node1>
Searching the domain for computer object 'cluster'.
Creating a new computer object for 'cluster' in the domain.
Configuring computer object 'cluster' as cluster name object.
Validating installation of the Network FT Driver on node <Node1>
Validating installation of the Cluster Disk Driver on node <Node1>
Configuring Cluster Service on node <Node1>
Validating installation of the Network FT Driver on node <Node2>
Validating installation of the Cluster Disk Driver on node <Node2>
Configuring Cluster Service on node <Node2>
Waiting for notification that Cluster service on node <Node2>
Forming cluster '<cluster>'.
Unable to successfully cleanup.
To troubleshoot cluster creation problems, run the Validate a Configuration wizard on the servers you want to cluster.
Event Log
=========
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          29/08/2008 19:43:14
Event ID:      1570
Task Category: None
Level:         Critical
Keywords:
User:          SYSTEM
Computer:      <NODE 2>
Description:
Node 'NODE2' failed to establish a communication session while joining the cluster. This was due to an authentication failure. Please verify that the nodes are running compatible versions of the cluster service software.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{baf908ea-3421-4ca9-9b84-6689b8c6f85f}" />
    <EventID>1570</EventID>
    <Version>0</Version>
    <Level>1</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2008-08-29T18:43:14.294Z" />
    <EventRecordID>4481</EventRecordID>
    <Correlation />
    <Execution ProcessID="2412" ThreadID="3416" />
    <Channel>System</Channel>
    <Computer>NODE2</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="NodeName">node2</Data>
</EventData>
</Event>
====
I have also since tried creating the cluster with the firewall and no success.
I have tried creating the node from the other cluster and this did not work either
I tried creating a cluster with just a single node and this did create a cluster. I could not join the other node and the network name resource did not come online either. The below is from the event logs.
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          01/09/2008 12:42:44
Event ID:      1207
Task Category: Network Name Resource
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Node1.Domain
Description:
Cluster network name resource 'Cluster Name' cannot be brought online. The computer object associated with the resource could not be updated in domain 'Domain' for the following reason:
Unable to obtain the Primary Cluster Name Identity token.
The text for the associated error code is: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
The cluster identity 'CLUSTER$' may lack permissions required to update the object. Please work with your domain administrator to ensure that the cluster identity can update computer objects in the domain.

I am having the exact same issue... but these are on freshly created virtual machines... no group policy or anything...
I am 100% unable to create a Virtual Windows server 2012 failover cluster using two virtual fiber channel adapters to connect to the shared storage.
I've tried using GUI and powershell, I've tried adding all available storage, or not adding it, I've tried renaming the server and changing all the IP addresses....
To reproduce:
1. Create two identical Server 2012 virtual machines
(My Config: 4 CPU's, 4gb-8gb dynamic memory, 40gb HDD, two network cards (one for private, one for mgmt), two fiber cards to connect one to each vsan.)
2. Update both VM's to current windows updates
3. Add Failover Clustering role, Reboot, and try to create cluster.
Cluster passed all validation tests perfectly, but then it gets to "forming cluster" and times out =/
Any assistance would be greatly appreciate.

SRM 7.0 Unable to create PO - Classic Scenario.

Hello,
We are able to successfully create the below scenario.
PR in ECC --> Get PR in SRM --> Start Collective processing -> Transfer to Central System (SC is created for the PR @ this time) --> Create RFx --> Rfx Response --> Create PO. (PO is created in ERP, Classic Scenario)
We are able to get the PR & we are able to create SC successfully and the PR/ SC is available in Sourcing cocpit.
Able to create RFx --> Rfx Response.
Now once the RFx Response is Accepted --> We go for creating PO.
Classic Scenario.
The error is due to pricing - debugged and checked as mentioned in my earlier message.
IPC pricing is switched off and the BADI for simple pricing is activated.
Error : " Message A BBP_PD 396 cannot be processed in plugin mode HTTP "
But this is due to pricing is what i guess.
Error is raised in FM "BBP_PDPRC_UPDATE".
Kindly Suggest.
Unable to Create PO
Regards.
Edited by: Purshothaman P on Jul 6, 2010 1:50 PM

Hi,
Please check and run the following reports (se38): BBP_CND_CUSTOMIZING_CHECK & RSVMCRT_HEALTH_CHECK and post back the results.
Note for BBP_CND_CUSTOMIZING_CHECK also run 'Simulation of Pricing with Manual Price' (scroll down after executing the report initially).
Also the badi information you activated tells us a lot. Although i take it that you executed and read everything that's included in the transaction information. The following sentence gives a prety doubtfull feeling for the CPPR scenario to work for your configuration:
SAP recommends using this BAdI only in exceptional cases and only after checking thoroughly if it is compatible with the Business Scenarios used.
Note: From what i've just read IPC has to be disabled, certain badi's etc. need to be disabled. And VMC (sap basis) has to be configured. Please view: [http://help.sap.com/SCENARIOS_BUS2008/helpdata/EN/9C/F90B7CB34A4889935D1733C6756D5B/content.htm]
Could you also please check and provide whether 'normal' SRM classic scenarios like: SC -> PO do run within your system. Also the error and information you have provided is very little.
Kind regards,
Tim

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Por

Error message: Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port-Printer. The Adobe PDF Printer may be unavailable. I'm using the original CD to set up

And on what system? Acrobat 7 is not compatible with Windows 7, if that's what you are using. You need to upgrade then.
Mylenium

Acrobat 7: Warning 20225- Setup unable to create PDF Port Printer

I had to replace my computer and I am trying to install Acrobat 7 Pro on Windows 7. I read a comment that said it's not compatible, but others say it can work. Since Adobe closed the activation server for CS2 & Acrobat 7, Adobe tech support gave me the link for the non-activating version of the exe file and new serial #. I was successful at installing CS2. Acrobat says the installation is successful and I am able to open Acrobat but at the end of install I got the Warning 20225: Setup unable to create a new item- Adobe PDF Port Printer. I tried to uninstall and change compatibility to XP, SP3 which is what my previous computer ran on, but still get same error every time. I don't use most the features of Acrobat so it doesn't make sense for me to buy a new version. Mostly, I just need to be able to print files to pdf (from Word, Illustrator, web). Any ideas of how to get this part working?

Thank you so much, Mylenium. I'm not sure if I'm setting up the printer right so please let me know where I am making errors. I clicked "add a printer" and when it asks to choose a port, I left it as "use existiing port" and selected "File: Print to file". In the window to choose a printer, I clicked "Have Disk" and browsed to one of the .inf files (I ran a search in the Acrobat folder and found four .inf files shown below. I don't know which to use so tried each one) but each time got the error message on the second screen shot below.
Do you know if there is a newer driver that is compatible with Windows 7?

Unable to create blank CD image

I am unable to create a blank MS-DOS FAT CD image using Disk Utility.
New Image
size: 663 (CD-ROM 80min)
Format: MS-DOS (FAT)
Encryption: none
Partitions CD/DVD
Image Format: read/write disk image
Hit [Create] button then progress bar appears and moves to completion. Then an error message box appears that says "Unable to create "test2.dmg." (Invalid argument)
Need to get this done so I can create gift CD's of my photos so if you know a work around for buidling a PC compatible CD I can take that too.
Thanks so much for your help.
Frank

Allan,
Thanks for the response.
I am making photo CDs for the parents of my son's soccer team. On each CD I put the JPEG originals plus a Flash slide show.
In the past this is what I have done:
1. In Disk Utility -> New Image with above parameters
2. Mount the new image
3. Put JPEGS and flash show on the image
4. In Disk Utility, select the image and select Burn
If I do this with MS-DOS (FAT) format, then anyone can read it (PC or MAC). If I use the Mac OS Extended (Journaled) then it can only be read on a MAC.
Can you think of another way to create a data CD?
Thanks!

Unable to create "filename" when exporting to SD disk from iphoto 7.1

I recently upgraded from iphoto 4 to 7. I did do because when I tried to export to a SD disk, I kept getting the unable to create message on various photos. I did the upgrade to 7 and I am still seeing this error message. Has anyone else run across this one?

George:
Welcome to the Apple Discussions. Try exporting to a folder on the Desktop and then copy the folder to the SD memory card. Also make sure there are no unusual/unsupported characters in the file names, i.e. anything other than 0-9, a-z, _, -. The format of the memory cards, PC based, does not accept those unusual characters. If there are a lot of special characters in the file names, you can batch change the title of the files with the Photos->Batch Change menu option. Then select the option during export to use the title as the new file name.
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Unable to Load Database/Unable to create database.

RoboHelp 6.0 on my PC is suddenly unable to open existing
projects or create new ones. The problem is not in the projects, as
other people can unzip the same set of files and open them with
RoboHelp on their PCs.
The Details:
When attempting to open an existing project (any project
whether in version control or not), I get the message " Open
project was cancelled or the application was unable to load
database for..."
I found the article that says to delete the CPD and XPJ files
and then to use the Edit option to open the HHP file so that
RoboHelp will recreate the two files. When I try that, I get the
message "Unable to create database. Check that the directory is not
read-only." It's
not read-only.
When I attempt to create a new project, the application acts
like it is going to create one, but it just creates a project
folder without the new first topic and then repeats the New Project
Wizard window that prompts for title, etc. It will keep creating
folders and returning to this window in a loop without ever really
creating a project.
RoboSource Control is functioning normally, by the way.
I have uninstalled and reinstalled RH 6 several times, and
have even uninstalled RH 6 and installed to RH 5 just to see if it
could open projects, which it does with no problems. After that
test, I uninstalled RH 5 and reinstalled RH 6, only to encounter
the same problem all over again.
This started happening after I uninstalled other unrelated
software and received a message that some Service Pack 2 files had
been changed and prompting me to insert the Service Pack 2 CD,
which I don't have. This is because our IT department pre-builds
our systems from an image and then distributes job-specific
applications over the network. IT tried repairing Service Pack 2,
but that didn't work. I'd like to uninstall and reinstall Service
Pack 2, but the IT person says it's too risky on a system that was
built from an image.
We would like to find out
which files RoboHelp is looking for when it launches a
project so we can replace those files manually. Does anyone
know what they are or have another suggestion that might fix the
problem?
Otherwise, I am stuck having to allow IT to rebuild my
system. That means reinstalling and reconfiguring everything on it,
just as if I were upgrading to a new PC. This can take a whole work
week. However, I have already spent close to a work week on this
problem, so maybe rebuilding would save time in the long
run.

Problem Resolution = HHA.dll
For anyone who might be interested in the resolution to this
issue, we did rebuild my PC and reinstall all of my software. The
RoboHelp installation "complained" that I did not have HTML Help
Workshop on my system and told me to download version 1.4 from
Microsoft. I did have HTML Help Workshop..it's in my programs list.
(It's not listed in programs on my co-workers' PCs, and they were
not having problems, by the way.) But to make RH happy, I
uninstalled the workshop and tried to install the version from
Microsoft. But a message informed me that I already had a newer
version of the workshop on my system, and I was back where I
started. I could open projects, but there were weird problems.
Selecting Topic Properties was met with an error message, and when
the properties window opened, I could only see whatever template
was assigned (or none if the topic had lost its template), and
there was an extra section for Oracle help.
So I started dinking around in the registry to see if I could
get rid of any traces of the workshop so I could install the
version RH wanted or to find any other clues to my problem. Under
HTMLHelpAuthor, there was a reference to an HHA.dll file located in
C:\WINDOWS\system32...only the file did not exist on my system.
(Remember that my original problem was that some Service Pack 2
files were either modified or missing.) So I did a Google search on
that file name and found out that HTML Help Workshop is included in
newer Windows operating systems, but that people used to have to
get HTML Help Workshop from Microsoft, and that some people had
made the mistake of just putting the HHA.dll file into the
C:WINDOWS\system32 folder without also installing HTML Help
Workshop. At this point it was obvious that I needed the HHA.dll,
so I got it from a co-worker's PC. (Looking at the registry
entries, I can also see that my system was built with a slightly
different version of the operating system than my co-workers have.)
Adding the HHA file to my system solved the problem. All
projects but one were fine; one was still exhibiting the strange
behavior. I fixed it by going back to the RoboHelp 5 version of the
project and re-converting it to RoboHelp 6.
I suspect that if I had known about the HHA.dll file before
we rebuilt the PC, I could have solved the problem without going
through that painful process. That is why I thought I should post
the solution even though it was after the rebuild.

Unable to create a report in bi publisher 10g

Hi All,
Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
Operation failed: /abcd/abcd.xdo.
When we tried to create a report with the existing name, it is saying
An object with the same name already exists: /crm/crm.xdo
I can say this is not any permissions problem, I have logged inwith Administrator user.
Thanks

Hi,
Can any one..???

Unable to create report. Query produced too many results

Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
        <br>
        <br>
        Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace:    at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
   at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
   at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.

Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
              maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ORA-01658: unable to create INITIAL extent for segment in tablespace

NEW REPOSITORY INSTALLATION ERROR!!
I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
After pressing the Install button in the RAU:
-I take public synonyms
-I scheck the box for "Support Designer Objects", then
-The Repository size is Medium
-I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
After Starting, the Installation began an stop by installing some Tables like schown :
Operation: Started : 07/03/04 20:26:32
Reading File: cktabs.sql
Object : TABLE CDDL_TMP_TBL
Executing statement(s)...
Verifying...
.and so on till....uns so weiter bis
Reading File: cktabs.sql
Object : TABLE RM$INFO
Executing statement(s)...
Error Submitting Definition: User intervention required...
RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
Dumping Buffer...
CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
...End of Buffer
User Requested: Stop Process
When I read the Help of the Error the
CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
-pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
-And the installato still stop with the same Error.
Question: How schould I resolve this Configuration?
You could respond in ENGLICH, GERMAN or FRENCH
Thank you for your Help!

You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
Regards
Sue

Unable to create an encrypted disk image in Lion

disk utility gives the error Unable to create "Volume.dmg." (error - 60008) when creating an encrypted disk image. I am using the following steps:
    1.    Open disk utility
    2.    Select the disk (internal or external) to create the image on
    3.    Select File>New>Blank Disk Image…
    4.    Save As: 'Volume'
    5.    Name: Volume
    6.    Size: 50GB
    7.    Format: Mac OS Extended (Journaled)
    8.    Encryption: 128-bit AES encryption
    9.    Image Format: read/write disk image
    10.    Click the Create button
    11.    Password dialog appears
    12.    When I enter a password the dialog closes after entering only a few characters i.e. before I've finished typing, and the following error message displays:
Unable to create "Volume.dmg." (error - 60008)
I have previously, successfully, created encrypted disk images in Snow Leopard, and I don't know why I can't in Lion
Does anyone have any ideas?

Thanks for this Thomas.
I've tried naming the image differently, but still received the error, I did however try different permutations for the password.
The error seems to happen if I use a purely numerical password string and occurs on input of the 10th numerical character, if I start with numerical character but use an alpha before the 9th number I can continue and create a password, and I can create a password if I start with an alpha and switch to numerals after the first alpha character, purely alphabetical passwords are fine too.
It seems that Lion doesn't like purely numerical passwords greater than 9 characters, whereas Snow Leopard wasn't so fussy. Seems it's a bit of a bug.
Thanks for your help

Unable to create an encrypted disk image with Disk Utility

Hi:
With our upgrade to Lion a few weeks ago, we're now unable to create an encrypted disk image of any type using Disk Utility any more. This problem occurs on 3 different machines, and is reproducible whether one is using an internal HD or an external FW HD. We can successfully create nonencrypted disk images.
This is a duplicate post with all the details here: https://discussions.apple.com/message/18469359#18469359
We haven't had any luck with a solution trying various permissions fixes as helpfully suggested by other readers in response to the error message # (-60008 error), so I'm hoping that someone else has run across a solution from the encrypted disk image perspective and that this tag line will generate some help.
Thank you!

Save As: 01 (on Desktop)
Name: 01
Size: 100 MB
Format: Mac OS Encrypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890
This says password strength is "Weak"
All works fine
Then I repeated this using:
Save As: 02 (on Desktop)
Name: 02
Size: 100 MB
Format: Mac OS Encypted (Journaled)
Encryption: 256-bit AES
Partitions: Single partition- Apple Partition Map
Image Format: read/write disk image
At the password window that pops up I enter: 1234567890 and when I start to enter the next "1" I get the "Unable to create "02.dmg." (error -60008)
OS 10.7.4
Disk Utility Version 12.1.1 (353)

Unable to create compatible TIFF

Similar Messages

Maybe you are looking for