Unable to Create G/L Account Number in G/L Group

Hi Experts,
We are not able to create G/L Account NO.
While creating Account Number in FS00 TCode,
I have selected one of the created Account group and gave the Account Number which falls under that Account group range. Still i am not able to create the Account Number.
I am getting the following error:
1)   No PABCDL statement account type is defined in chart of accounts ABCD
2)   You cannot create the Account Number using the range which is specified.
Please let us know
Thanks
Rajanikanth

HI,
Before you start creating your G/L account the minimum configuration required are as given below.
1.Creation of Company code
2.Define Chart of accounts
3.Assign Chart of accounts to company code
4.Define account group
5.Define retained earnings account.
If you will try to carete the G/L account without creating the Retained earnings account the error what you have pointed  will appear.
You may please check your configuration and then craete the G/L
If find helpful assign points.
Surendra

Similar Messages

  • Unable to create a caldav account on iPhone 3G

    Hello and thank you for looking at my problem and for any advice you may have.
    I have a client that is trying to connect to his office Calendar server with his iPhone 3G running iOS 4.3.3 (not jb). The server is an XServe running 10.5.8 Server. The phone is connecting to it via the office LAN.
    I was able to set up this phone for the user's personal calendar on the office server with no problem, it works fine. There is an office wide calendar that he also wants to be able to use on the phone. When I try to create the account, I enter the server address, account information, etc and click Next, it tells me that SSL is not available (correct) do I want to continue, I tell it to continue and then BOOM the Settings app closes and I am back on the Desktop. Entering Settings again I find that the account has not been created.
    Now here is where it gets weird. If I go to the personal calendar account and change it's settings to use the office wide calendar settings, I am able to save this and work with the calendar without issue. If I then try to create another calendar account using his personal settings, account creation fails in the same manner as described above.
    Is there a limit to the number of caldav accounts in this version of iOS? I have set up other phones (iPhone 4 running 6.0.1 and iPhone 5s running 6.0) and they all have worked fine.
    Any help would be much appreciated.

    If you are trying to sync via iCloud, you can share Mail, Calendars, and Contacts running Snow Leopard. Based on my experience, I don't recommend syncing Contacts - created a lot of problems with duplicates.
    Snow Leopard iCloud - Address and iCal
    Snow Leopard iCloud –  iCal
    Snow Leopard iCloud - Configuring Mail with Mac OS X v10.6 or iOS 4

  • Unable to create an iTunes account

    When I try and create an Itunes account, I receive a notice: "Item Not Available: My date & Time settings are correct, how can get my computer to accept cookies from iTunes?

    Have you tried re-installing iTunes?

  • Unable to create a mobile account on Macbook

    We have a Macbook where during the first login they chose not to create a mobile account with this particular login ID (active directory).
    Now we need to allow this user to have a mobile account on the Macbook but when we try it will not create a home folder etc.
    If we login with a different user it works just fine.
    I notice it does not show the user in the accounts-preferences only when logged in with that ID. It also comes up with network,managed vs. managed,mobile.
    Anybody have any ideas? Is there a way to remove the user ID so we can start over to create a mobile account.
    I did try to create a mobile account using the preferences but it did not work. It still fails and is coming up with the "The home folder is not located etc etc" message.
    Thanks

    Update:
    I finally found a work around in the forums. The command I used was this:
    sudo
    /System/Library/CoreServices/ManagedClient.app/Contents/Resources/createmobileac count
    -n userid -v
    The post was this:
    http://discussions.apple.com/thread.jspa?messageID=7515435&#7515435
    Hope this helps someone else.

  • Unable to create a sync account

    I can't create a Sync account. I have never had one and am trying to set one up so that I may sync my firefox with my android. I have followed the instructions to set one up but when I push the finish button, I don't get a window that says setup complete. I have tried several times.

    You're welcome
    Did you find the cause?
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe Mode|Safe Mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Unable to create a BIS account

    Hello!
    I recently bought a BB 8310 that is unlocked, it works just fine to make calls and send SMS texts, with any SIM card, but every time I want to create an Internet Account on blackberry.orange.es it shows this message "your account have been suspended. Please contact your system administrator". The phone is AT&T, but I never use it before, it's brand new and brought with me to Spain.
    Does anybody knows a solution to this?.. Pleasee!!!
    Thanks 

    For any reason your device is not registered with the network try this,
    go to menu, options, advanced options, host routing table, press menu again and register now,
    after this Log in on your Carrier account and go to setup blackberry mail, and click on the service book
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • Unable to Create an iTunes account (free usage or otherwise) (iPhone 3GS)

    So my father and I just bought our selves iPhones to stay in touch (today is the 24th... well now 25th). I recently wanted to try to get foursquare, skype, and a few other free apps so I decided to try making me an iTunes account. We tried 3 different credit cards to try and make one but they all came back with the same issue "your credit card was declined please try another pay method."
    Jump to 2 hours ago I've been trying constantly to make a Free app account, the type where you go to the store, click a free app, apply for an account and say "none." When asked for credit card information, which then allows you to download free apps only. Well using this method I get the EXACT same responce "your credit card was declined please try another pay method."
    Is there currently some issue going on with the iTunes store right now?
    I should note I've tried making an account through both the iPhone and my PC.

    I don't know what "something" you were trying to redeem, but if it was a valid iTunes Store give, go to the main iTunes Store page (within iTunes), click on the "Redeem" link on the right side of the page, and enter in the code from your card. You'll be able to create an iTunes Store account without needing a credit card.

  • I have books I wish to load to an iBookstore Free Account. I am unable to create such an account because Apple's sign-up requires details of a credit or debit card even though my Apple ID specifies NO card. Wake up Apple, or authors will be off to Google

    I have books which I wish to load to a free account on iBookstore. I am unable to do so because the sign-up process keeps demanding details of a credit or debit card. I am neither selling anything nor buying anything, and my Apple ID works fine with NO credit or debit card details (you just specify NONE).
    I think Apple had better wake up and wake up quickly, otherwise their 'control freak' attitude is going to lead to authors going to Google - and I will be one of them! Let Apple find a way around this, I have wasted too much time already messing about with their system.

    The best place to convey your thoughts to Apple is via
    http://www.apple.com/feedback
    In meantime, use an Aggregator or another store.  Apple has not had any problem attracting books during the last 3 years and it seems unlikely their policy on this will change to accomodate you.  But there is always hope...

  • Tried everything unable to connect to itunes store try later - i have an i pod, also unable to create a new account

    unable to access itunes store temporarily unavailable try late, tried many things,           can open store
    can access my account details

    Hi FRED--krugger,
    If you are having issues accessing the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    - Brenden

  • Unable to create game center account.  Keeps prompting for location and birthdate

    Whenever I try to create a game center account, it loops always asking for location and birthdate.  The phone says the Apple ID has not yet been used in Game Center, tap continue to setup your account, then it prompt for location and birthdate again.  Any ideas how to get account setup?

    I'm gettng this same message.  I have been using the same Apple ID for all my iOS device, but I ended up creating a new Apple ID for my wife's iPhone.  After I verified the new Apple ID, I logged out of Game Center, and entered my newly created Apple ID.  Now I'm stuck in the same loop as you.  Were you able to get out of it?

  • Unable to create Customer in Accounts Receivable

    Hi,
    I am using Oracle Applications : 12.0.4. I that I am trying to create a customer, But the system is flaging the follwoing error.
    FND_SESSION_MANAGEMENT.UPDATESESSIONCONTEXT SQLException: java.sql.SQLException: OALL8 is in an inconsistent state
    Could some one help me out in resolving the issue.
    Thanks,
    Vijendra

    In Release 12.0.4:
    Please check and do the necessary entry of the Customer Address, with the proper state, county, city, and province., because in R12 it is become mandatory and address need to be checked.
    this information may helps.
    Regards,
    NSrikanth

  • Bank Account Number Creating in IT0009

    Dear All.
    I have facing problem one my employee left from organizational on dated :01.09.2011 & rejoined from dtd: 21.10.2011 (Newly hired), So when i gone to create the his account number in IT0009 that time system was showing " This Bank account number is already existence". So please suggest me what i can change in system & how can i solved it.?
    Please reply any one urgent..
    Satish.

    Hi Satish,
    What my guess & understanding at this stage is,
    There is a validation on master data entries for this particular info type to avoid in proper assignment of one employee account number to another employee like that. A BADI might be used to give the @this table level validation.
    Get the Badi and do further condition along with Bank Key & Account number validations, if Possible.
    Second, Try with info type attributes
    Time constrains for info type 9 is T which means depends on time constrains class of sub type of that info type.and check the Possibilities with Display  and selection dates, Try with the subtype info type attributes also..
    P.S Do the proper activity and through testing.

  • Unable to create an eprint acount

    Iam unable to create an email account.  I go to sign in and it says I don't have an account.
    Then I go to create an account and it says I already have one. My model # is hp deskjet 3070A.
    I have tried many times to create an eprint account , with the same results. I tried to sign on to snapfish and
    it will not allow me to, so I did not create a snapfish account instead of an eprint account. I've tried using my printer code to no avail also!!!
    This seems to be a problem with other accounts users, what's the fix?
    This question was solved.
    View Solution.

    HI there modupefemi welcome to the HP forums; 
    Can you try this to see if you have an old shapfish accout.
     Normally when someone has this issue, they have an existing Snapfish HP account.
    1. Go to www.snapfish.com and click on "log in" at the top right.
    2. On the splash screen that comes up click on the "forgot your password"  link and submit your email.
    3. You should receive an email with a link and a temporary password.
    4. Click on the link and log in with the temp password.
    5. Change your password to something that has at least 6 characters (at least 1 of those should be a number).
    6. Go back to www.eprintcenter.com and click on Sign In.
    7. On the next screen do not put your email or password, but click on the
    small Snapfish below.
    8. On the splash screen that comes up log in with your email and the password  you just created at Snapfish.
    This will merge your HP accounts and you should be able to log in to www.eprintcenter.com normally after that.
    let me know if you still having this issue I will do my best to help you.
    Hope this helps!
    RobertoR

    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Customer open items, transfer to new account number

    Does anyone have experience in transferring customer open items to a new account number?

    Thanks for the reply, the situation I have is there are existing postings on a customer account in SAP. The client wants to create a new account number and transfer the balances from the old account to the new account. There are a significant amount of items on the old account. Normally I would use transaction F-30 for a small number of postings but this requires posting each line item individually to the new account. I was hoping there was a more systematic solution.

  • Group account number / Group Chart of Accounts

    Hi all,
    We have created a new group COA and have assigned it to the company COA.
    (In a production environment)  We have assigned the group COA number under the Group Account Number of the company COA.
    There is already transaction data's posted to these GL accounts for the entire year.
    1. How to update these transaction data's with the Group Account Number?
    2. Is there any program available to make this updating?
    Thanks in advance

    Hi
    Our client is planning to create a group account number and populate the group account number in the GL master.  They already have transactions posted to the group account number.
    But the question is how to populate the group account number on the historical trasnactions. Did you find a solution for this problem?
    Appreciate if you can provide the solution
    Thanks.....Bajee

Maybe you are looking for

  • ESignature software with Adobe Reader

    Hi, I'm using an Adobe Reader plugin called eSign Desktop 2.7.  This plugin works wtih Adobe Reader and an e-Signature pad (hardware) to allow users to sign PDF documents.  This plugin worked fine on Windows XP with Adobe Reader 8.1. It does not work

  • [b]How to deploy forms 6i on Oracle 9iAS[/b]

    Hello, Anybody knows hot to deploy forms 6i on Oracle 9iAS (WEB). Oracle 9i Application contains several options 1. Oracle9iAS installation. 1.1 J2EE and Web Cache. 1.2 Portal and Wireless. 1.3 Business Intelligence and Forms. 2. Oracle9iAS Infrastru

  • Can't Change Payment Info

    I have twice tried to edit my payment information in order to switch from a debit card to a credit card. My account information shows the correct credit card information, but my charges for purchases continue to draw against my debit card. I could re

  • How can I increase subtitle font size in Apple TV?

    I'm watching HD movies through Netflix and the subtitle font is very small. I need to increase the size. How?

  • Importing PSD files with layers.

    Sometimes when I import Photoshop files that have layers, I can double-click them, and they open as multi-layer sequences where I can control the opacity and blend modes of the layers. Sweet. But then sometimes they don't, so I have to go back to PS