Unable to create smart albums as metadata does not register

I recently upgraded to 3.0 and have imported/upgraded my previous albums. All the images show up and have the appropriate metadata, but when I go to create a smart album only the images uploaded and tagged in the last two weeks (that is, directly into Aperture 3.0 and not upgraded from 2.0) show up. Any suggestions on how to get 3.0 to register the metadata (particularly keywords) from the earlier images?

As long as you have let Aperture run long enough to process all images (check via "Window→Show Activity"), then I suggest repairing and if needed rebuilding your library. It won't harm anything (usually). Full directions are here:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=26%26se ction=10%26tasks=true

Similar Messages

The SMART ALBUM IPHOTO 6 DOES NOT SEEM VERY INTELLIGENT!

BOUJOUR
ALBUM INTELLIGENT
MA PHOTOTHEQUE EST ORGANISÉ PAR MOIS
CHAQUE MOIS CORRESPOND A UN ALBUM INTELLIGENT
JUSTE UNE CONDITION " LA DATE EST ENTRE LE 01-09-2006 ET LE 30-09-2006"
DEPUIS LA MISE A JOUR VERS IPHOTO 6
APRES IMPORTATION DEPUIS L'APPAREIL PHOTO LES NOUVELLES PHOTOS SONT IMMEDIATEMENT VISIBLE DANS MA PHOTOTHEQUE GENERAL ET DANS LE DERNIER ROULEAU MAIS PAS DANS L'ALBUM INTELLIGENT CORRESPONDANT
IL ME FAUT
SELECTIONNER L'ALBUM INTELLIGENT
COMMANDE MODIFIER L'ALBUM INTELLIGENT
VALIDER ( SANS RIEN MODIFIER CAR MES CRITERES DE DATE SONT BONS)
ET A LA VALIDATION LA PHOTO EST AJOUTER A L'ALBUM INTELLIGENT ET SON COMPTEUR INCREMENTER
LES ALBUMS INTELLIGENT DE IPHOTO 6 NE SEMBLE PAS TRES INTELLIGENT !
HELLO
SMART ALBUM
MY LIBRARY IS ORGANIZED PER MONTH
EACH MONTH CORRESPONDS A SMART ALBUM.
JUST ONE CONDITION "The DATE is BETWEEN the 2006/09/01 AND the 2006/09/30"
SINCE UPDATE IPHOTO 6
AFTER IMPORTATION SINCE the CAMERA The NEW PHOTO ARE IMMEDIATELY VISIBLE IN GENERAL LIBRARY AND IN LAST ROLLER BUT NOT IN The SMART ALBUM CORRESPONDING
I NEED SELECT SMART ALBUM
ORDERS TO MODIFY The SMART ALBUM AND VALIDATE (WITHOUT ANYTHING TO MODIFY BECAUSE MY CRITERIA OF DATE ARE GOOD) AFTER VALIDATION PHOTO IS ADD A SMART ALBUM AND ITS METER INCREMENTER
The SMART ALBUM IPHOTO 6 DOES NOT SEEM VERY INTELLIGENT!
emac Mac OS X (10.4.7) Mini Mac

Gilbert:
Welcome to the Apple Discussions. It seem to work for me so try deleting that smart album and create a new one. See if that will work. Also deleting the iPhoto cache folder from your User/Library/Caches folder might help.
Also using all caps is difficult to read and is tantamount to shouting in the forums. It's much easier to read when in lower case. Thanks.
Do you Twango?

Unable to create smart album

Hi,
I am using iPhoto 6.0.6. Yesterday I wanted to create a new smart album. But after choosing "File" => "New Smart Album" nothing happens. I do not get a dialog box.I can create a normal album. book and calendar. I created a new library but taht did not help either.
I have searched for an answer but could not find anything.
Hope that someone of you will have a solution.
Thanks in advance.
Wouter.

Wouter
the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts) and make a library there, see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Unable to create rule Error:Function Module does not meet the workflow conv

Hi Workflow experts,
Could any one help me with rule creation. Below is my Function Module Interface.
""Local Interface:
*" TABLES
*"      AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*"      ACTOR_TAB STRUCTURE SWHACTOR OPTIONAL
*" EXCEPTIONS
*"      NOBODY_FOUND
The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
I Also have included the following in FM
INCLUDE <cntn01>.
Any suggestions would be helpful. Thanks in Advance,
Imran

Hi,
I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
Hope this helps,
Sudhi

Create Smart Albums with Applescript

Hi
I'm looking for a way to create smart albums with Applescript. So far I was able to create simple albums.
Does anybody now if this is possible?
Best wishes
kik

File menu ==> new smart album
LN

Creating Smart Albums problem

I'm on pg 132 of Aperture 2 Pro training book. I'm stuck at #4 which states "The images matching the search criteria appear in the Browser." They don't for me. The HUD is set up for, Rating (checked) "is greater than or equal to" is selected and set at 5 star as per instructed. After completing and closing HUD as instructed, why are all the images in lesson 2 still showing in the browser instead of just the 5 star for this Smart Album? Maybe I'm missing the point but according to what they state as I repeated above this seems incorrect.
So far I'm not too impressed with the way this book is written. On the same page of Creating Smart Albums, #2 states to rename the untitled Smart Album and then press Return. According to the book this would apply the name to the Query HUD, which it didn't. It wasn't until I finally pressed the Magnifying Icon that I could get it to register onto the Query HUD. They left that bit of info out. One of several over looked steps.
Your help will be appreciated.
John

Hi Tony,
The steps you suggested were previously done and yes the smart album was selected. Nothing would work until I clicked on an (x) in the right side of the "Full text search or Limited text search" field just to the right of "match." Once I hit that (x), it disappeared and every thing began to work as expected. Why the (x) was there while nothing appeared in that field is puzzling but I will probably figure it out as I proceed. I did click in that field once in my attempts. That must have froze the operation some how.
Many thanks for your contribution. I'm sure you will be seeing more of me here as I plow through this not so well edited tutorial.

Unable to lookup home: Path to object does not exist at : java:comp#

Hallo,
I do not understand why I am getting the exception:
Unable to lookup home: Path to object does not exist at : java:comp#
if i have defined in the ejb-j2ee-engine.xml the jndi name:
<enterprise-beans>
     <enterprise-bean>
          <ejb-name>MyConverterBean</ejb-name>
          <jndi-name>MyConverterBean</jndi-name>
          <session-props/>
     </enterprise-bean>
</enterprise-beans>
and in the ejb-jar.xml :
<enterprise-beans>
   <session>
      <description>the converter bean</description>
      <display-name>MyConverter</display-name>
      <ejb-name>MyConverterBean</ejb-name>
      <home>converter.MyConverterHome</home>
      <remote>converter.MyConverter</remote>
      <local-home>converter.MyConverterLocalHome</local-home>
      <local>converter.MyConverterLocal</local>
      <ejb-class>converter.MyConverterBean</ejb-class>
      <session-type>Stateless</session-type>
      <transaction-type>Container</transaction-type>
    </session>
</enterprise-beans>
I am creating the EJB in this way:
ic = new InitialContext();
objRef = ic.lookup("java:comp/env/ejb/MyConverter");
home = (MyConverterHome)PortableRemoteObject.narrow(objRef, MyConverterHome.class);
converter = home.create();
I checked in the Administrator tool under JDNI / ejbContext and I can see MyConverterBean in the list.
Do you have any idea what I am doing wrong?
thanks a lot for your help,
SAPLernen

Hi Vladimir,
do you have some example or tutorial of how can i implement java proxies from a java stand alone application.
i allready make everyting but i'm still having problem.
this line give me a null
queryOutLocalHome = (UsersSyncMI_PortTypeLocalHome)ctx.lookup("java:comp/env/ejb/UsersSyncMI_PortTypeBean");
this is my java class that invoke my ejb java proxy
package com.gsk.xi.demo;
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import com.sap.aii.proxy.xiruntime.core.MessageSpecifier;
public class InvokeProxy {
     private Object objRef = null;
     private InitialContext ic = null;
     public String getRole(String name, String pwd){
          String role="0";
          UsersSyncMI_PortTypeLocalHome queryOutLocalHome=null;
          UsersSyncMI_PortTypeLocal queryOutLocal=null;
          try{
               Context ctx = null;
               Object ref = null;
               Properties p = new Properties();
               p.put(Context.INITIAL_CONTEXT_FACTORY,"com.sap.engine.services.jndi.InitialContextFactoryImpl");
               p.put(Context.PROVIDER_URL, "buasapp012.gwamericas.corpnet1.com:50004");
               p.put(Context.SECURITY_PRINCIPAL, "J2EE_ADMIN");
               p.put(Context.SECURITY_CREDENTIALS, "was1234");
               ctx = new InitialContext();
               //objRef = ic.lookup("java:comp/env/ejb/UsersSyncMI_PortTypeBean");
               //queryOutLocalHome = (UsersSyncMI_PortTypeLocalHome)PortableRemoteObject.narrow(objRef, UsersSyncMI_PortTypeLocalHome.class);
               queryOutLocalHome = (UsersSyncMI_PortTypeLocalHome)ctx.lookup("java:comp/env/ejb/UsersSyncMI_PortTypeBean");
               queryOutLocal = queryOutLocalHome.create();
               MessageSpecifier msg = queryOutLocal.$messageSpecifier();
               msg.setSenderService("JAVA");
               queryOutLocal.$messageSpecifier(msg);
               UserDT_Type reqtype = new UserDT_Type();
               reqtype.setUsername(name);
               reqtype.setPassword(pwd);
               UsersDBMTResponse_Type response = new UsersDBMTResponse_Type();
               response = queryOutLocal.usersSyncMI(reqtype);
               role = role + response.getStatementResponse().getRow().getRole();
          catch(Exception ex){
               System.out.println(ex.getMessage());
          return role;
} //end of class
thanks for your time
Lionel

When trying to creat a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem...

Question
When trying to create a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem?I do not have any installed plugins....at least none that I know of.....remember I am a new user......Basically, the desktop icon is not going directly to the Mozilla FF to get me to the web site I need to go to.....FF works when I use the Mozilla FF icon.....just not the icons I create.....THANKS!!! I have also tried reinstalling FF and get the same results.....HELP!!!

The address beginning with file:/// denotes a saved file (local file). The file may not be present. You can try dragging the site icon of this page on the left edge of the location (Address) bar and release it on the desktop. Please try opening it. If it still shows an error it could be a problem with the system's zone permissions. You can try setting each zone in the Windows Control Panel or IE > '''Internet Options''' > '''Security''' tab to '''Default Level'''.

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

How to create an OAF page that does not need login to access

We have a lot of Oracle users, and everyday there are some users forget there username or password and need reset. I really want to use a web page to let them reset their passwords automatically. The web page will call the API to reset password if it found the user request is legible.
So based on the situation, the users should not need a login to get to this page, can I do this using OAF?
And idea is welcome, thank you for your help!
-Bill
Edited by: billzheng2004 on Jun 18, 2009 12:12 PM

Srini,
Thank you for your response, I think we need to go back to my original question, is it possible to create an OAF page that does not need login, how can I do that.
I think I said too much and led us to go to a different direction I did't want to. But I am still glad to texplain why I need a custom password reset process, that is all about business requirement, here it is:
----I am not sure that "company issues" (such as what you described) can be solved by software -
I already have a solution for that. Create a custom OAF page, ask user to input his SSN / Date of Birth.... then I can figure out what his real username easily. And I can reset his password as his SSN or something which only this particular user knows. Then he can login.
----you may have to impart training to end users.
As I mentioned, most of our users use only Benefit self service. They only login several times a year, even they are trained this year, most of them will forget next year, this is just human nature. And because the nature of our business, thousands of employees may change at the end of a year. It does not make any business sense for company to prepare trainers every year.
----In any case, the functionality you require is already built into the product.
I guess the reason most companies hire Oracle Developers is that some functionality Oracle Applications provide is not exactly the companies needed. When there is Oracle Apps product, there is alway customization.

A JE created from the AP Invoice does not include the project # on all trx

A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?

Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin

Ipad takes photo every time I close the cover of its case. When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding.

When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.

It seems to take a picture of the counter top = I do not see the keyboard.
I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
Thanks for the quick tip on deleting multiple pictures.

HT1277 I am unable to Quit Mail and this then does not allow me to shut down my desktop apple.

I am unable to Quit Mail and this then does not allow me to shut down my desktop apple.

Welcome to the Apple Support Communities
Open  > Force Quit and close Mail

Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4

Hi Guys,
Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4.I'm running the installer from a local drive and also noticed that the uninstaller files are not created.The installer process has been running for 4+ hours.
Any suggestions/tips?
Thanks
Manoj

hi John,
we left the installer running overnight, but the install process has still not completed.Also it has not created any uninstaller files under the following directory:
E:\APPS\Hyperion\uninstall
what could be the reason for that?
Thanks.
Manoj

I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

Just found the answer - if you have the sam problem look here for the answer:
https://discussions.apple.com/thread/5769424?tstart=0

Unable to create smart albums as metadata does not register

Similar Messages

Maybe you are looking for