Unable to find data of Batch Number Transaction Report

Hi,
From Batch Transaction window with View --> System Information I found that the related table is RITL and RITN. But I could not find it in the table list of my database. My Database is SOL Server 2008 R2 and my application is SAP B1.
Can any one provide me information regarding the above table?
Thanks & with regards.
-- Pranjali Sawant

Hi Pranjali....
Try This
case when T0.[Direction]=0 then 'In' when T0.[Direction]=1 then 'Out' end Direction, Case when T1.[Status]=0 then 'Released' end Status, T2.[U_Height], T2.[U_Width], T2.[U_Length] FROM IBT1 T0 INNER JOIN OIBT T1 ON T0.BatchNum = T1.Batchnum and T0.Itemcode=T1.ItemCode INNER JOIN IGN1 T2 ON T1.ItemCode = T2.ItemCode and T0.Quantity = T2.Quantity WHERE T1.[ItemCode] =[%0] and T1.[BatchNum] =[%1]
Regards
Kennedy

Similar Messages

Batch Number Transaction Report

Dear Experts,
Is it possible to modify the form settings of Batches table in Batch Number Transaction Report as I need to add in some user-defined fields into it?
Below is the layout of my Batches table in the report:
Batches
#   Item No   Item Description   Batch   WhsCode   Qty   Status   Manufacturing Date
and I would like to add in Width, Length & Height columns in the table.
I can't preset the value of length, width & height of the item in Item Master Data because different batches of same item will have different length, width & height. So I created these fields (Width, Length, Height) in Goods Issue & Goods Receipt and assigned different values there. After that, I need to do some references at Batch Number Transaction Report to find out which batches got the specified measurement of that item.
Thanks in advance.

Hi Sachin. I think you have misunderstood what I mentioned before.
I want the report to show like this
Item No.   Item Description              Batch   WhsCode   Qty   Direction   Status        T     W        L
A893S     Pine 14 x 125 x 1030mm          A123    WH01       100   In        Released   14   125    1030
A893S     Pine 14 x 125 x 1030mm          A123    WH01       -10 Out       Released     14   125    1030
A126B     Ash 14 x 125 x 1090mm          J123     WH01        50   In         Released   14   125    1090
In fact, below is the result table that I get
Item No.   Item Description                Batch   WhsCode   Qty   Direction   Status        T     W        L
A893S     Pine 14 x 125 x 1030mm            A123    WH01       100   In           Released   14   125    1030
A126B     Ash 14 x 125 x 1090mm            J123     WH01        50   In            Released   14   125    1090
using this query
SELECT T0.[ItemCode], T0.[ItemName], T0.[BatchNum], T0.[WhsCode], T0.[Quantity],
case when T0.[Direction]=0 then 'In' when T0.[Direction]=1 then 'Out' end Direction,
Case when T1.[Status]=0 then 'Released' end Status, T2.[U_Height], T2.[U_Width], T2.[U_Length]
FROM IBT1 T0
INNER JOIN OIBT T1 ON T0.BatchNum = T1.Batchnum and T0.Itemcode=T1.ItemCode
INNER JOIN IGN1 T2 ON T1.ItemCode = T2.ItemCode and T0.Quantity = T2.Quantity
WHERE T1.[ItemCode] =[%0]
Thanks,
Xavier

Batch Number Transaction Report Menu ID

Dear Expert,
Can you please tell me what is the Menu ID for the Batch Number Transaction report?
Thanks & Regards,
Tushar Nathwani

Hi Tushar........
Go to Start> All Programs> SAP Business One> SDK> SDK Help--> Type with Menu ID......
You can find the Menu ID List for all the objects used in SAP.
And the Menu ID for Batch No. Transaction Report is 1747....
Hope you are asking for the same what I told you........
Regards,
Rahul

Batch Number Transactions Report - TURN OFF

We are managing our batches in B1 2007A; however, our customers do not care what batches they're receiving, per se.
That being said, we do not want batch reports to be created each time an invoice is readied to be printed, as we simply X each report that appears (batch number transactions report, batch report in document). Can these be turned off if batch management is on?
Thank you!
Russell Clayton

Thanks for the clarification request -
When we use the document printing feature, we can skip the generation/printing of batch number transaction reports and such; however, when we're doing one-off invoices (not a large run, which is common with our company), the simpleness of choosing print preview and only seeing the invoice pop up would be ideal, as we do not want to print the batch reports at this time (only track within the system).

Batch Number Transactions report preliminary page

Hi Everyone,
I am trying to print a delivery document with Batches. The system prints the Batch transaction report along with the packing list which is good.
However, I do not want the first page that says - Batch Number Transactions Report - Selection Criteria page to be printed as it is of no use. Is there a way, we can disable this preliminary page from printing?
Appreciate your input on this.
Thanks,
Payal

You may check these threads:
Re: Supress Printing of Aging "Header"/Summary Page
Suppress Printing of Selection Criteria page
Thanks,
Gordon

Error in Batch Number Transaction Report

Dear All
While generating 'Batch Number Transaction Report' in SAP B1 8.8 the following error occur which we could not solved:
"Runtime error
R6025 - pure virtual function call"
This occurs when selection is made on item properties for the report.
Please suggest solution.
Thanks & with regards
Aloke Bandyopadhyay

Hi ALok......
Check the thread related to this problem........
Email and PDF Icon on AR Invoice Visual C++ Runtime Error R6025
Also this might be the Microsoft Issue or check Virus run also.....
Regards,
Rhaul

Layout - Batch Number Transactions Report

Hi all,
Our customer has made a layout (IBT3, In Document Tree) in the report 'Batch Number Transactions' via "Inventory -> Inventory Reports -> Batch Number Transactions Report"
When you have filled the selection criteria in Batch Number Transactions Report and when you click on 'Print Layout Designer'-button you can choose 3 layouts that are:
- Without Transactions
- Specified (Including Transactions)
- In Document Tree
When you click on the 'Print Preview'-button the following layouts are available:
- Without Transactions
- Specified (Including Transactions)
And the layout "In Document Tree" is not available and why?
Thanks in advance,
Chief

Chief,
The 'In Document Tree' option is the layout which is used when there are batches for a transaction and the batch report is printed along the original document - you can't print it from the Batch Numbers Transaction Report.
For example you create a GRPO with a batch managed item and when you print the GRPO there will be 2 documents printed: one for the GRPO itself and one for the batch numbers - this is the layout you set as default for the 'IBT3 - In Document Tree' option.
Hope it helps.
Regards,
Nat

Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
Edited by: bhagav on Jan 5, 2012 1:20 PM

Hi ,
Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
check and update accordingly later .
Thanks
Kamal Mehta

Unable to find data source null [Caused by: jdbc/Apps1DataSource not found]

Hi,
I am using OA Adapter which listens to an EBiz HRMS event, and I am encountering the following error in $Home\j2ee\oc4j_soa\log\oc4j_soa_default_group_1\oc4j\log.xml while registering the ESB service.
Error details:
<MSG_TEXT>Failed to process control event for Service "DefaultSystem.SyncWorkerPartyEbizOAAdapter" due to an error while adding the Service! Reason : oracle.tip.esb.server.common.exceptions.BusinessEventFatalException: An unhandled exception has been thrown in the ESB system. The exception reported is: "ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter Oracle Applications Resource Adapter was unable to activate the endpoint oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec:{MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.per.api.person.update_person', QueueName=WF_BPEL_Q, Consumer=ORA_6krj2dpn70s36c1g6h1k8dhi8h, DatabaseSchema=APPS, AppsEventSchema=ANY_SCHEMA} due to the following reason: javax.resource.ResourceException: Unable to find data source null Caused by: jdbc/Apps1DataSource not found
Please correct the reported issue and redeploy the BPEL process.
     at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:566)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateInboundJcaEndpoint(ESBActivationAgent.java:390)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.performEndpointActivation(ESBActivationAgent.java:306)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:236)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:209)
     at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateEndpoint(InboundAdapterService.java:177)
     at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateService(InboundAdapterService.java:119)
     at oracle.tip.esb.server.service.EsbServiceFactory.activateEsbService(EsbServiceFactory.java:222)
     at oracle.tip.esb.server.service.EsbServiceFactory.addEsbService(EsbServiceFactory.java:240)
     at oracle.tip.esb.server.common.RuntimeESBSystem.addService(RuntimeESBSystem.java:211)
     at oracle.tip.esb.common.system.ServiceEventsHandler.handleCreateService(ServiceEventsHandler.java:72)
     at oracle.tip.esb.common.system.MetadataChangeListener.handleServiceEvent(MetadataChangeListener.java:136)
     at oracle.tip.esb.common.system.MetadataChangeListener.onMetadataChange(MetadataChangeListener.java:85)
     at oracle.tip.esb.common.control.ControlMessageHandler.handleMessage(ControlMessageHandler.java:115)
     at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:162)
     at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:120)
     at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
     at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
     at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: Unable to find data source null
     at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:411)
     at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getConnection(AppsManagedConnectionFactory.java:288)
     at oracle.tip.adapter.apps.AppsManagedConnection.getConnection(AppsManagedConnection.java:85)
     at oracle.tip.adapter.apps.AppsConnection.getJdbcConnection(AppsConnection.java:70)
     at oracle_tip_adapter_apps_AppsConnection_Proxy.getJdbcConnection()
     at oracle.tip.adapter.aq.database.MessageReader.establishDBconnection(MessageReader.java:358)
     at oracle.tip.adapter.aq.database.MessageReader.<init>(MessageReader.java:265)
     at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.init(AQActivationSpecDequeuer.java:142)
     at oracle.tip.adapter.aq.AQEndpoint.<init>(AQEndpoint.java:99)
     at oracle.tip.adapter.aq.AQResourceAdapter.endpointActivation(AQResourceAdapter.java:73)
     at oracle.tip.adapter.apps.AppsResourceAdapter.endpointActivation(AppsResourceAdapter.java:147)
     at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:541)
     ... 20 more
Caused by: javax.naming.NameNotFoundException: jdbc/Apps1DataSource not found
     at com.evermind.server.rmi.RMIServerContext.lookup(RMIServerContext.java:207)
     at com.evermind.server.ApplicationContext.unprivileged_lookup(ApplicationContext.java:257)
     at com.evermind.server.ApplicationContext.lookup(ApplicationContext.java:197)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:408)
     ... 31 more
</MSG_TEXT>
I have added the connection properties in $Home\j2ee\oc4j_soa\application-deployments\defaul\oc4j-ra.xml as follows:
<connector-factory location="eis/Apps/apps1" connector-name="Oracle Applications Adapter">
     <config-property name="xADataSourceName" value="jdbc/AIADataSource"/>
     <config-property name="dataSourceName" value=""/>
     <connection-pooling use="none">
     </connection-pooling>
     <security-config use="none">
     </security-config>
</connector-factory>
Please correct me if the connection properties are wrong.
I tried AppsEventSchema with 'NO-SCHEMA' and 'ANY-SCHEMA' also.
If I use File Adapter I was able to register the ESB and instances were created successfully.
My versions:
JDEV:      10.1.3.3.0
SOA:     10.1.3.3.0
I have done a lot of research on this but in vain. Is there any patch for rectifying this error?
Help me on this issue pl.
Regards
RK

You need to check your datasource name jdbc/AIADataSource
Check out your data-sources.xml to make sure you didn't mistype it.

GR date as batch number

Hi Experts,
I have a situation where I should configure the system, so system should automatically create batches at the time of GR and the batch number should be GR date (27102001)
Please suggest.
R.S

I dont know for what reason you use batch managment. We are doing it for quality reasons.
if we get 2 batches of the same material from our vendor, we usually have slightly different quality data, hence we create as well 2 batches in our system.
I kow it is possible that each material can have the same batch number. but if you just use the date as batch number, then you can only have one batch per material and day. so you could never manage above mentioned case.
Maybe it is not a problem with your materials, and you just want 1 batch despite of having serval receipts of the same material on the same day.......but if you have to distiguish, then you need more than just the date, maybe an additional character like A or B or -001 and -002

Error -2000 unable to find data reference

Hi
Ive just recently installed the SP2 Windows update and I suddenly cant run mov files in Quicktime. When I do run them I get an error "error -2000 unable to find data reference" . These mov files used to work . Ive uninstalled QT and reinstalled but it did not change the problem - Im running the latest QT available which I think is 7.5.5. When I unistalled QT I did not unistall Itunes
It has been a while since I ran these files but the Windows SP update is the most recent change I can think of
Any ideas on how to fix this would be appreciated

You need to check your datasource name jdbc/AIADataSource
Check out your data-sources.xml to make sure you didn't mistype it.

Sapinst unable to find DATA/SAPSTR.LST

Hello ALL,
Please suggest as to how could this error be resolved.
"sapinst unable to find DATA/SAPSTR>LST"
Thanks and Regards,
Ankit Mishra

Hi,
Did you already check the export location and existence of the file SAPSTR.LST?
If exists, perhaps a permission issue. If not then various reasons could be applicable.
Check this thread too http://forums.sdn.sap.com/thread.jspa?threadID=2043214. Are you doing a heterogeneous copy?
Regards,
Srikishan

Batch/Serial Number Transaction Report

when we created A/R Invoice or Return..we can see its Batch/Serial Number transaction report..in which table the barcode is saved?
i need this table because i want to create 'Reverse' transaction for it, so we can reconcile it and make new transaction with 'correct' value..
thx,
erick

Hello Eric,
BarCode is stored in OITM table, Field Name: CodeBars.
You can join the OIBT, IBT1 (Batches) and OSRI, SRI1 (Serial Numbers) tables into OITM table to get the transaction report.
Outgoing batches and serials are stored in the IBT1 and SRI tables, so it is enought to join them into the OINM view (table)
In 8.8 Views has been created for IBT1 and SRI1 tables.
If the items by Delivery note. In this case the delivery note is the key for the serials/batches transaction report. You may create a short development for displaying them in the invoice.
You may read the following blog to understand the basic queries and use them in practice
/people/janos.nagy/blog/2010/06/18/displaying-serial-numbers-batch-details-on-invoice-part-ii
So basics: (2007 and also 8.8)
Bacthes related to Invoices
SELECT T0.[BatchNum] , T1.[Quantity] , case when T0.[ExpDate] is null then '' else convert(nvarchar,T0.[ExpDate],102) end, T2.CodeBars FROM OIBT T0 INNER JOIN IBT1 T1 ON T0.ItemCode = T1.ItemCode and T0.WhsCode = T1.WhsCode and T0.BatchNUm = T1.BatchNum inner join OITM T2 on T0.ItemCode = T2.ItemCode WHERE
T1.[BaseType] = '13' and
T1.[BaseEntry] = [INVOICE_DOCENTRY]
Serial numbers:
SELECT T0.[IntrSerial], T2.CodeBars FROM OSRI T0 INNER JOIN SRI1 T1 ON T0.ItemCode = T1.ItemCode and T0.SysSerial = T1.SysSerial inner join OITM T2 on T0.ItemCode = T2.ItemCode WHERE T1.[BaseType] = '13' and T1.[BaseEntry] =[YOUR_INVOICE_DOCENTRY]
Regards
János Nagy

Serial number transaction report

Hi,
Where do I find Serial number transaction report?
Do any one know t.code or program name?
I am unable to locate following menu path,
Inventory >>> Inventory Report >>> Serial Number Transaction Report
Please some one guide me.
Thanks and Best Regards,
Mohan

Try using tcode OIYH: Serial Number List
Thanks & Regards
JP

Serial Number Transaction Report export to excel but serial not exported

Hi Experts,
I'm trying to export Serial Number Transaction Report to excel in a client database (SP00 PL47). Basically, the report has two screen, the Serial Number (Top) and Transactions for Serial Number (Bottom). When I try to export it, it only export the Transaction for Serial Number. We Need the serial number to be exported, how do we go about this? I tested same database on SP01 PL07 and exported the Serial Number and Transactions for Serial Number. Why is it working in other database, do we have settings that we need to configure?
Regards,
Sai

Hi Don,
In the serial number transaction report, when you click on the excel tab the Save as window will open just cancel the first window there is onther window opened, just save that window under the other name e.g. 123.
because both the window has same name.
Then check the excel file.
Regards,
Datta Kharat

Unable to find data of Batch Number Transaction Report

Similar Messages

Maybe you are looking for