Unable to find files upon opening...

Every time I open my project, I get a pop up that says the program is unable to locate certain files. The files have not been moved on my computer (and have previously been uploaded into Premiere). It's never the same files... can be a jpeg image or a mov video file... and once I find it, everything is fine. However, the next time I open my project, it starts all over again (but often times with completley different files). What's going on???

As Steve points out, the only reason for this message is that the Path of those files has changed, or at least PrE thinks that they have changed. This could be due to drive letter assignment, Renaming, Deleting, Moving.
Your PREL, Project File, is but an XML database with only links to the media files, and instructions on what to do to them. Those files are linked via the Path, where they were located, when you Imported them. If that is altered in any way, then PrE will ask, "Where is file ____ ?" Fortunately, when you navigate to that file's location, PrE will then link to all other media files used in that Project in that folder. If the files are in several folders, you will need to then navigate to the next folder, where all used files in it will be re-linked.
As Steve points out, a common issue is with externals, that often get different drive letters, depending on which devices are plugged in to the computer, and in which order. Remember, the Path is absolute. If you original Path was E:\PrE_Projects\[Project Name]\Stills, but now you are looking at F:\PrE_Projects\[Project Name]\Stills, you WILL need to locate those files.
I use externals to migrate my Projects between my workstation and my laptop. Each external has a unique driver letter, and that is set in the OS of each computer. That means that external Z:\ is Z:\ on all of my computers, regardless of what else might be plugged in, and in which order.
If the Path has not changed in any way, then I would think about a failing HDD, and read/write errors.
Good luck,
Hunt

Similar Messages

  • Backint failed "ERROR: unable to find file "

    Hello
    I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
    I got errror:
    BR0231E Backup utility call failed
    ERROR: unable to find file /oracle/BWP/sapdata4
    Can u help me
    Regards
    Fethi

    This is the backup logfile:
    BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
    BR0101I Parameters
    Name                           Value
    oracle_sid                     BWP
    oracle_home                    /oracle/BWP/102_64
    oracle_profile                 /oracle/BWP/102_64/dbs/initBWP.ora
    sapdata_home                   /oracle/BWP
    sap_profile                    /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
    backup_mode                    ALL
    backup_type                    offline
    backup_dev_type                util_file
    util_par_file                  /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
    system_info                    orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
    oracle_info                    BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
    sap_info                       700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
    make_info                      linuxx86_64 OCI_102 Feb  8 2008
    command_line                   brbackup -c force -p initBWP_sapdata_offline.sap
    BR0116I ARCHIVE LOG LIST before backup for database instance BWP
    Parameter                      Value
    Database log mode              No Archive Mode
    Automatic archival             Disabled
    Archive destination            /oracle/BWP/oraarch/BWParch
    Archive format                 %t_%s_%r.dbf
    Oldest online log sequence     27
    Next log sequence to archive   30
    Current log sequence           30               SCN: 88160883
    Database block size            8192             Thread: 1
    Current system change number   88168768         ResetId: 655409152
    BR0118I Tablespaces and data files
    Tablespace     TS-Status  F-Status  File                                                       Size   Id.     Device  Link    Type       MaxSize     IncrSize  BlkSize
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data1                      17498636288    4       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data2                      16450060288    5       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data3                      15820914688    6       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWM700.data1                   15128862720   11       64784  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM700.data2                    4132511744   12       64785  NOLINK  FILE   34359721984         8192     8192
    PSAPBWPDIM     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMdim.data1                    4202700800    7       64770  NOLINK  FILE   10485760000     20971520     8192
    PSAPBWPFACT    ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMfact.data1                   6719283200    8       64770  NOLINK  FILE   34359721984     20971520     8192
    PSAPBWPODS     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWMods.data1                   19868426240    9       64784  NOLINK  FILE   34359721984     20971520     8192
    PSAPBWPUSR     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMusr.data1                     239083520   10       64770  NOLINK  FILE   10485760000     20971520     8192
    PSAPSR3USR     ONLINE+    ONLINE+   /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1            134225920   20       64785  NOLINK  FILE   10485760000     20971520     8192
    PSAPTEMP       ONLINE#    ONLINE+   /oracle/BWP/sapdata1/temp_1/temp.data1              10485768192   -1       64770  NOLINK  FILE   34358689792     20971520     8192
    PSAPUNDO       ONLINE-    ONLINE+   /oracle/BWP/sapdata1/undo_1/undo.data1               1073750016    2       64770  NOLINK  FILE   34359721984     20971520     8192
    SYSAUX         ONLINE*    ONLINE+   /oracle/BWP/sapdata1/sysaux_1/sysaux.data1            671096832    3       64770  NOLINK  FILE   10485760000     20971520     8192
    SYSTEM         ONLINE*    SYSTEM+   /oracle/BWP/sapdata1/system_1/system.data1            838868992    1       64770  NOLINK  FILE   10485760000     20971520     8192
    BR0119I Redo log files
    File                                                Size  Group     Device  Status    Link    Type
    /oracle/BWP/origlogA/log_g11m1.dbf              52429312    1        64774  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogA/log_g11m2.dbf              52429312    1        64776  INUSE     NOLINK  FILE
    /oracle/BWP/origlogB/log_g12m1.dbf              52429312    2        64775  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogB/log_g12m2.dbf              52429312    2        64777  INUSE     NOLINK  FILE
    /oracle/BWP/origlogA/log_g13m1.dbf              52429312    3        64774  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogA/log_g13m2.dbf              52429312    3        64776  INUSE     NOLINK  FILE
    /oracle/BWP/origlogB/log_g14m1.dbf              52429312    4        64775  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogB/log_g14m2.dbf              52429312    4        64777  INUSE     NOLINK  FILE
    BR0120I Control files
    File                                                Size   Id.      Device  Link    Type
    /oracle/BWP/origlogA/cntrl/cntlrBWP.dbf         34979840    0        64774  NOLINK  FILE
    /oracle/BWP/origlogB/cntrl/cntrlBWP.dbf         34979840    0        64775  NOLINK  FILE
    /oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf         34979840    0        64770  NOLINK  FILE
    BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
    PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
    PSAPBWPUSR
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
    BR0057I Backup of database: BWP
    BR0058I BRBACKUP action ID: bdxzgdlt
    BR0059I BRBACKUP function ID: aff
    BR0110I Backup mode: ALL
    BR0077I Database files for backup:
    /oracle/BWP/origlogA/log_g11m1.dbf
    /oracle/BWP/origlogB/log_g12m1.dbf
    /oracle/BWP/origlogA/log_g13m1.dbf
    /oracle/BWP/origlogB/log_g14m1.dbf
    /oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
    BR0061I 19 files found for backup, total size 108250.510 MB
    BR0143I Backup type: offline
    BR0130I Backup device type: util_file
    BR0109I Files will be saved by backup utility
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
    BR0307I Shutting down database instance BWP ...
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0308I Shutdown of database instance BWP successful
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0229I Calling backup utility with function 'backup'...
    BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
    WARNING: unknown parameter: print_log_flag 1
    WARNING: sort_backup_type not specified in .utl file
    WARNING: default sort_backup_type to <size> for restore
    Program:                /usr/sap/BWP/SYS/exe/run/backint 5.1
    Input File:             /oracle/BWP/sapbackup/.bdxzgdlt.lst
    Profile:                /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
    Function:               BACKUP
    Backup Type:            BACKUP_FILE
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
    ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
    ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
    ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
    ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
    ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
    BR0232E 0 of 19 files saved by backup utility
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0231E Backup utility call failed
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
    BR0304I Starting and opening database instance BWP ...
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
    BR0305I Start and open of database instance BWP successful
    BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
    Thank you
    Regards

  • CS2 Unable to find file errors

    Hi
    We are having trouble with photoshop cs2.  We can not open most files.  Tiff, PSD, some PDF files will give an "unable to find file error".  Jpg files, and certain PDF files and TIFF files that use jpg compression work.  I have tried resetting all the settings, changing scratch disks / memory usage, uninstalling all fonts, and reinstalling the application and the problem persists.
    Also i do not know if this is related but the same time we started having errors in photoshop we also have problems in Microsoft Word.  The font list shows a lot of fonts as just a white box.  Other apps can use the fonts fine.  Just not in word.
    I have attatched a JPG file with screen caps of the errors.

    I reset the options by doing the hold shift alt ctrl while starting up photoshop.  Also i deleted all the preference files out of the application data\adobe\photoshop folder.  Same problem persists.
    Also another issue i have noticed.  Say you perform an action like erasing somthing, or changing the brightness/contrast.  You can not see the changes until you click on a different tool.  Then it updates the display.
    I will try and locate the faq and see what it says.

  • Unable to find file "ConfigureClusterNode" error

    Hi All
    I am trying to install UCM Cluster. According to Universal Content Management Cluster Configuration Guide for UNIX 10g Release 3 (10.1.3.3.1)
    I can do this running Installer with some parameters, but I have Unable to find file "ConfigureClusterNode" error.
    (http://download-west.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/integrator/install_cserver_unix_10en.pdf)
    [wc@hostname linux]$ ./Installer -set-ClusterNodeIntradocDir=/home/wc/cluster/node1 -set-ClusterNodeName=node1 -set-ClusterNodeAddress=10.33.33.33 -set-ClusterBinDirRule=local ConfigureClusterNode ConfigureAdminClusterNode
    Unable to find file "ConfigureClusterNode".
    The file wait.dat wasn't removed.
    I need help to identify and solve the problem.

    Hi, and a warm welcome to the forums!
    Forgive me, I'm about to go for a psychic cure here and pull a rabbit out of the hat, or is it a needle from a haystack!?
    I'm thinking that if this remote volume was like SMB/MS-DOS/Fat32, that the "caseness" may be the problem... here's why... Uppercase may translate to be shown either Capitalized or lowercase on the other end, and although Fat32 is supposed to be/ and in fact IS Case Sensitive, many things along the way may almost rightfully expect Uppercase 8/3 format, and "Testing.df1" may show as "Testing.df1", but also "TESTING.DF1", and "testing.df1" might show as "Testing.df1", but behind the scenes it's back to reality.
    Might be the most nothingness I've ever pulled out of thin air!?

  • GRUB unable to find file, fails to install

    (FTP install via floppies, GRUB 0.96-1, installation via arch/setup utility)
    GRUB fails to install, giving the error message "Error: unable to find file" after checking for a file in /boot/grub (grub.menu IIRC), and quitting without further action. Menu.1st is there, but GRUB seems to want something else.

    There might be an issue relative to the used fs. I allways had problems if I tried to install grub into xfs or jfs partitions, and had to install lilo first during installation procedure. After first boot, I usually removed lilo and installed grub without any problems.

  • Unable to find file [any file].htm in the Configuration/Floaters directory (CS6) [Solved]

    This is more of an answer than a question. I had been having this problem all of a sudden, and none of the solutios I'd found on Adobe or anywhere else were working. SO sicne the easy route wasn't working, I looked at it myself.
    A key lead came from an answer on Adobe Forum in that the problem exists in the last configuration you were using (e.g., Desginer, Coding, Dual Screen, etc). The issue is that one of the XML entires lists an item that DW doesn't like, so you need to delete that entry and everything is great.
    Close Dreamweaver.
    On the PC, look in C:\Users\[your name]\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\Workspace for a file with the name of [your configuration].xml, and open it with a text editor.
    Look for "id=[your configuration]"
    Delete the <panelframe></panelframe> that contantains that id in the previous step.
    Save and close the file.
    Open Dreamwweaver.
    In my case the problem was com.html and my Workspace Configuration was Dual Screen. So I edited "Dual Screen.xml" and deleted the <panelframe></panelframe> that contained id="com" saved it, and started Dreamweaver without the error.
    My only question is that since this is a not uncommon error, why the #$%^&* isn't Adobe support able to provide this info? Or, better yet, since their start-up process can find the spcific error, why aren't they capable of simply deleting that Panelframe data as a restult of the error and taking care of it that way?
    Anyway, good luck with this!

    BTW, I'm sorry for my horrible typing in the intial post.

  • How to find file is open or not in java

    hai;
    i want to know that , the particular file is opened on eariler or not,
    can you help me how to find out , the file is earlier opened or not
    thanks regards

    davvidmaria wrote:
    hai;
    i want to know that , the particular file is opened on eariler or not,
    can you help me how to find out , the file is earlier opened or not
    thanks regardsWhat do you mean by opened on earlier or not?
    If you want to check to see if a certain file is open you could probably use the file class and check to see if you can write to the file check out the api
    [http://java.sun.com/j2se/1.4.2/docs/api/java/io/File.html]

  • When I click on a link in an email I always get a message 'General failure URL :.... unable to find file' and seconds later the web address opens. Is there anyway to stop this?

    I get a message saying 'General Failure. The URL was: ".........". The system cannot find the file specified' whenever I click on a link in an email and then seconds later the web site opens. If I open firefox and then click a bookmark or search I don't have a problem

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • Unable to find files younger than 7 Days old in FINDER

    When I save a file I can't find it until it is about a week or so old - or so it seems.
    I have just save several screen shots to my iMac to illustrate this point but I can't find them. When opening my HDD to find them (either in Desktop or a special Sceenshots folder I set up by TinkerTool) my only options are:-
    Previous 7 Days
    Previous 30 Days
    Earlier
    Same applies if I try to use the 'Find' under File in the Finder Menu bar.
    Even if I use "Finder Menu/File/Find" to search -
    "This Mac"
    "Last opened date" is
    "within last" 1 "days"  -
    all I get returned is the last folder(s) opened within the last 7 days. No files at all.
    Something is wrong here? What have I messed up?  I'm sure this was fine a while ago - may be six months ago?  I've been using Macs for years. I've never come across this sort of problem before.  Help would be very much appreciated please!
    TinkerTool has been reset to before it was started, incidentally.

    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist and and com.apple.desktop.plist. Move the .plists to your desktop.
    Restart and test. If it works okay, delete the plists from the desktop. 
    If the same, return the .plists to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • Export to iTunes, unable to find file

    Gentlefolk;
    Please forgive the very newbie question. I have the Checkbook app, which is great, but I want to have the app do some simple summing of monthly expenses. This is apparently does not do, but it does export out to CSV format. Given that, I can pop into Excel and go nuts.
    After the export, the prompt says to recover the file in iTunes. But it doesn't say how. This apparently is so self-evident that no further direction is needed.
    The support at iBear said with the iPad connected to the computer, go to the Apps tab and scroll to the Common files and get the export from there. But I have no "Common" files in the App store, nor does anything like that appear in the iPad that I can tell. I could grouse about lack of file access, but moving on....
    So, I tried to export a Numbers app to iTunes thinking I could find THAT. But I cannot.
    So, when something is exported to iTunes, just where the deuce is it to be found?
    Many thanks.
    Don

    Try opening the stereo file in Quicktime Movieplayer and check the info:
    1. Control click on the file.
    2. From the contextual menu that pops up choose "open with" and select QuicktimePlayer.
    3. When the file opens press ⌘ + i to get info on the file.
    4. Is the original file 16 bit 44.1 khz? Or if it is an mp3, is it stereo, 44.1 khz?It needs to be for GB to read it correctly.
    Kurt

  • CC Illustrator asking for referenced files upon opening (DropBox)

    I locate my CC Illustrator file on DropBox.  All of the files it references are also on DropBox.   I work exclusively on the Illustrator file on DropBox (I never download it to my computer and work on it).  I do this so that my wife can also open this Illustator file (on DropBox) from her computer and work on it - again with all of the referenced files located on DropBox.  She never downloads the file to her computer.  I just want to be clear about that. : )
    PROBLEM:
    1) I work on Illustator file on my computer then close it.  My wife opens it on her computer.  Illustator shows dialog box "Can't find _____.png file"   Do you want to Replace, Ignore or Cancel.
    So we "reconnect" by hitting "Replace" finding the file on DropBox that my computer always referenced.   The Illustator file opens, everything is in its place.
    2) My wife makes no changes to the file.  tries to "Close" the file and it asks her to "Save As".
    QUESTIONS:
    1)  Why does my wife have to locate reference files when all of the work is done on DropBox and all of the refence file are located on DropBox?
    2) Why does she have to "Save As" and replace the main file (located and opened on DropBox) when she has made no changes to the file?
    If it helps any, you should know we share the exact same DropBox account (not just a shared folder) which is set up on her computer and on my computer.

    The only thing I can think of why centralizing the folder on DropBox isn't working is that the pictures being referenced when on my computer are probably listed in Illustrator as:
    DropBox/mycomputer/Macintosh HD/Users...etc.
    Whereas when my wife opens this illus. file on her computer, it wonders where "mycomputer" went to.  So, she relinks the pic files and now Illust. makes the new links as:
    DropBox/hercomputer/MacintoshHD/Users...etc.
    She makes changes while the file (and all pic files) are still located on DropBox.
    I then open the file located on DropBox and it says "Hey, man, where is the pic file listed now as "DropBox/hercomputer/Mac HD...".  I then have to relink and then the new reference is DropBox/mycomputer/MacHD..."
    Not sure if that's why but that's my guess.
    The Old Thread above wrote about an Absolute Path that Illy is using. 
    Is that the official answer from the Adobe Illy team?  Is there a good reason for this?  How can multiple people work on a single file and ref files stored on a server and not have these pop-up, relinking dialogue boxes happen?

  • Unable to find file error while loading data from text file to Oracle

    Hi,
    I am having a interface where i am loading a data of Text file to Oracle.
    But when i am trying to do this i am getting following error.
    ODI-1227: Task SrcSet0 (Loading) fails on the source FILE connection SAPMM.
    Caused By: java.sql.SQLException: File not found: d:/mdb/#General.get_filename
         at com.sunopsis.jdbc.driver.file.FileResultSet.<init>(FileResultSet.java:160)
         at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
         at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
    SAPMM is connection name.
    I am using get_filename to get the filename and it is fetching correct value as the this variable refreshes in previous step of this interface.
    KM used for loading is File to SQL
    What would be cause of this error?
    Thanks,
    Mahesh

    Hi,
    Did a testing and following are the result
    I have
    A> created package having steps like
    1. Declaration of variable v_filename.
    2. Refreshing variable v_filename.
    3. Execution of Interface which gets the file name from v_filename and load into target table
    Package executes successfully.
    B> created package having steps like
    1. Declaration of variable v_filename.
    2. Refreshing variable v_filename.
    3. Scenario of Interface which gets the file name from v_filename and load into target table
    Package executes with erre as it is not able to find the file
    C> created package having steps like
    1. Declaration of variable v_filename.
    2. Refreshing variable v_filename.
    3. Execution of Interface which gets the file name from v_filename and load into target table
    4. Now create a scenario of the package , use the generated scenario in another package say main_package
    Execution of main_package is successful.
    Thanks,
    Sutirtha

  • Can't find file when open exe

    when i double click on an exe, a dialog will appear to ask me to find a directory.  The title bar says "Please Find Err Called Vis Directory Last@"  I guess it means I need to find the Last@ directory that contains VIs which are called by another VI called Err?  I don't have a directory with a @ in its name.  Any thoughts on that?
    Kudos and Accepted as Solution are welcome!

    Development environment path and executable paths are different.  There's one more level to strip off in the exe. 
    You can get an app-type out of the application reference property node, and along with a case structure figure out how many strip-paths to pop in there.
    And since I have it open/readily available:
    Attachments:
    appkind-strippath.png ‏35 KB

  • Webstart -Unable to find file in jar.

    (I've looked thru the other posts)
    I have a jar file which contains various config files in xml format. The jar is included in the jnlp file as a resource.
    The config reader uses a passed in URL to load these files.
    When I attempt to get the url for a file, eg. dbconfig.xml, using the following snippet:
    this.getClass().getClassLoader().getContextualUrl("dbconfig.xml")
    I get a null value. The code works when run locally as a regular app.
    Any help appreciated!

    I don't have the solution but I would tell that I have the same problem in my apps.
    For exemple, I have a parameter file named "services.xml".
    Using a Junit test class, I can access it using "getClass().getResource("services.xml")" when I work directly with the project sources but I can't access it when it is packaged in a jar file.
    By now, I must duplicate thoses parameters files in my subprojects.
    For me it's because methods we want to use doesn't support files access in packages. The solution would be to use methods which supports package access. The ClassLoader and the properties file acces do this, so it may be possible !
    Is anyone knows how it's made ?

  • Error: Unable to find file image browser on you system??? help

    I keep getting this error when I try and add an image to my form. I can do it on another computer with no problem, but on my work one who these forms are for it's not working. but I can add images to anything else, word, excel, etc, just not in LiveCycle.
    I obviously have an image browser, but how can I get Livecycle to recognize it?
    Thanks :-)

    My goodness jamieboo, its been 4 years since you posted this! And no answer is here as of yet, especially needed this to be answered now that I have identical problem.
    Good Luck
    Jim

Maybe you are looking for