Unable to get process chain successful messages via custom program

Hi all,
I am executing a process chain both from the custom program and RSPC transaction. A message is supposed to generate for all the successful executions. The problem is I'm getting the message via email while executing it via RSPC transaction. But while executing it from the custom program I cant get the messages though the process chain has run successfully. I'm using the FM RSPC_API_CHAIN_START where the synchronous and noplan parameters are checked to suppress the server name and priority pop-ups . Following is the code for reference,
CALL FUNCTION 'RSPC_API_CHAIN_START'
       EXPORTING
      i_chain            = l_chain
      i_synchronous      = c_x
      i_noplan           = c_x
      IMPORTING
        e_logid          = l_userid
      EXCEPTIONS
        failed           = 1
        OTHERS           = 2
Please suggest if someone has any idea in how to do it. Thanks in advance.
Regards,
Debapriya

Debug and check what values you are getting at Exceptions.
or you can use RSPC_CHAIN_START instead RSPC_API_CHAIN_START.
or you can get the status of process chain using FM RSPC_API_CHAIN_GET_STATUS or table RSPCPROCESSLOG.
-SS

Similar Messages

Hi all, I am trying to update my Ipad OS tO 5.1, but was unable, keep getting error in installing message? Please advice. Thx

Hi all, I am trying to update my ipad OS to 5.1, but was unable, keep getting error in installing message. Please advices. Thx

Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
After you install iOS 5.x, the next update can be installed when connecred via wireless.
 Cheers, Tom

Downloaded and installed trial version of Adobe Captivate. Even though I get a installed successful message it is not in applications folder. Where is it?

Even though I get a installed successful message it is not in applications folder. Where is it?

Hi 88Gears,
Try typing 'Captivate' in spotlight and see if it shows the application else you need to reinstall the software.
Regards,
Rave

All of a sudden my iTunes stopped working, and I get the following error messages: 1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem and 2. iTunes was not installed correct

All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192)

Process Chain - Email Messaging

Hi Gurus,
We have implemented the Process chain with Email messages (Success or Failure). We are getting the entire log message of the process chain instead of just 1 line message (Load of 0FIAP is success).
Is there a way to suppress the message when it send the email.
Please advise.
Thanks. Gowda.

I personally like to receive all of that data if I need to look at it. So, what I do instead is have a meaningful header/title for the message. Something like <system>: <success/fail>: <chain name>.
So, if I was in production (system BWP), with chain ZBW_MASTER_DATA and it ran successfully, I would see an e-mail titled:
BWP: Success: ZBW_MASTER_DATA.
With this, I know the message came from BWP, the chain ran successfully and it was ZBW_MASTER_DATA.
No need to look at the message at all. Unless I received BWP: Fail: ZBW_MASTER_DATA!
Sorry, I didn't answer your question, but I hope I made your life easier in the long run!
Brian

Process chain - send message (email) title replaced by variant

Dear all,
On a process chain I have created a message (to send email) after a process is sucessfully completed. However, the Title I have defined on the message get overloaded by the Variant. When I save the message seems fine but when I get back to it the title was changed again. This seems to be a system error but I have failed to find an OSS note so far. Any Ideas?
SAP BW version 3.1. - SP18
Thanks in advance

Hi........
We hav the option to create message......Right click the "Execute Infopackage" process type >> select create message >> select conditon(success/failure/always) >> provide recepient list >> save...........
But I don't think that u can send the wrong records in the infocune..........
Check this........
http://www.scribd.com/doc/6125528/How-to-Send-a-Data-Load-Status-Mail-From-SAP-BI-Using-Quick-Stats
Hope this helps........
Regards,
Debjani.......

Process chain status message in the custom screen.

HI All,
We have created a custom screen for hierarchy upload in BW once the file has been uploaded it will trigger an event which is triggering a process chain. The process happen like
Upload the file from desktop it will go and sit in al11 folder
Trigger an event which will trigger the process chain
Infopackge routine has been written which will download the file for al11.Please find the attached screenshot is for your reference.
Once the DTP has been completed we need to trigger a message which will tell us the status of the DTP like finished successfully or not. This message should have to show in the custom screen which we have provided to the customer.
We are aware of mail recipient list option. Please suggest further options
Many thank sin advance.
Regards,
Sakthivel S

Hi Appana,
Yes, we can identify any screen changes from sy-datar. It is set when I make any changes in the custom screen also. But I dont want to give a pop up every time I leave the custom screen. I want to give raise a pop up for saving the delivery document just like any other SAP screen (For eg. SAP Screens do not give a pop up when we move from one screen to another screen, but it gives a pop up if we try to do a subsequent functions like picking without saving the changes in delivery).
Thanks
Anil

Need calrification " am not getting error or success message anywhere "

Dear All,
PI PIcks and Arcives the file successfully but i cant find any error or success message in channel monitiring , Moni or Message Monitoring since i am aware that i am passing XML file and doing FCC in sender channel.
Pls Explain me why PI Picked up and Archived the file since file format was wrong and It doesnt show any error in channel monitoring or Moni or Message Monitoring
and also pls explain me as i understand PI picks the file and Archive it then PI process the file from archive :pls correct me if am wrong
Regards,
Manikandan

>> since i am aware that i am passing XML file and doing FCC in sender channel.
I believe you are converting flat format file to XML using FCC. Dont understand passing xml file and doing fcc in sender channel?
Check the following..
1) See the file you place in the sender side has file permission to execute
2) Are you referencing the right file in the file sender communication channel?
3) Make sure that your fcc sender file throws error by simulating simple error such as giving field names invalid in the fcc. Then we can figure it out whether fcc referencing the appropriate file or some other file.
Hope this helps. I would like to get elaborate explanation about your problem.

I am unable to get my bluetooth working message says "make sure car mutli media is in range" how do I get connected?

I am unable to get my bluetooth working on my phone. the message says "make sure car mutli media is in range" how do I get connected and what does that mean?

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maintaining process code in EWM via a program or FM

Hi All,
Is there any program or function module which can be used to update/maintain the process codes in EWM. Process codes are maintained in table - /SCDL/DB_PRCODES and can be maintained on screen via /n/SCWM/PRDI or /n/SCWM/PRDO.
The requirement we have is we need to update the process codes in bulk rather than doing it manually via the transaction code.
Pls if anyone can help
Thanks,
Puneet

Hi,
Using RSCRM_BAPI we can do it. But you need to use SAP/Customer Exit Variables or Fixed values for Variables.
See
https://websmp103.sap-ag.de/~sapdownload/011000358700004400232004E/HowToRSCRM_BAPI.pdf
Re: Running Quaries automatically and saving them in as a Excel file in Server
Re: Data transfer to external systems
Re: Loading from a Custom R/3 Table
Re: How can I schedule my Bex report to execute in background
Re: How can I insert the RSCRM_BAPI into Process chain?
How to transfer the Data from SAP-System to Non-SAP system without additional Cost/License
/people/surendrakumarreddy.koduru/blog/2009/03/11/how-to-transfer-the-data-from-sap-system-to-non-sap-system-without-additional-costlicense
Thanks
Reddy

Upgraded WLC5508 to 7.6.130 now get AAA Authentication Success messages continually

I upgraded to 7.6.130 at weekend to get rid of the MFP messages, now when I am logged into the WLC
see the following messages continually while logged in, any way of getting rid of them or is it another bug?
0
Tue Sep 23 15:25:53 2014
AAA Authentication Success for UserName:commsrbrad User Type: MGMT USER(READ WRITE)
1
Tue Sep 23 15:25:45 2014
AAA Authentication Success for UserName:commsrbrad User Type: MGMT USER(READ WRITE)
2
Tue Sep 23 15:25:43 2014
AAA Authentication Success for UserName:commsrbrad User Type: MGMT USER(READ WRITE)

What type of logging level enable on your WLC ?
Pls paste show logging output to see what type of messages are they.
HTH
Rasika
**** Pls rate all useful responses ****

I have windows 7. I keep getting error message"apple application support not found". I have uninstalled and reinstalled i tunes multiple times but unable to get rid of error message. Can anyone offer a solution

I have windowa 7 operating system. When I install I Tunes, I get an error message "Apple Application Support not found".
I have uninstalled and reinstalled I Tunes multiple times with same error.
Can anyone offer a solution?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Unable to get Disk2 downloaded successfully !!

On the Novell website you see:
File Size (in bytes): 861383524
If I download the file, i have only 170MB and get errors on unzip. Can any one help me?

I'm having exactly the same problem, DVD1 zip file downloaded fine but I've tried to get DVD2 now with Firefox twice and GetRight once and always get a nice smooth download which finishes at exactly 187,761,868 bytes with an unusable zip file that's about 700Mb too small.
The URL I'm directed to download from is:
EDIT <sorry, users need to register and accept license agreement prior to download> EDIT
I'm trying again from Getright and also with IE6.
[Edited by: smaoz on Jan 22, 2005 8:24 AM]

I have iphone4s with rogers, my cuzzin has an iphone4s with bell, i'm unable to send her a txt message via wifi or regular coverage, but she is able to send me txt which i respond! whats up?

help

Mail does not go through Apple servers at all unless you are subscribing to MobileMe, so this is not an Apple issue and they cannot help you. Also, this is a user-to-user site, you aren't speaking to anyone from Apple here. You have done what you can by contacting Speakeasy and AT&T, as you stated your deadline is not up yet. If it passes contact AT&T. You can also contact AT&T customer service and ask for a credit to your account.

Unable to get Disk1 downloaded successfully !!

Hi,
I have tried downloading Disk1 twice now unsuccessfully. everytime the download seems to be completed 100%, but when I go for unzip, it fails.
Also on both occasion, the file size downloaded was DIFFERENT...
Please help....
Regards
Kiran

Need more information to be able to be help, such as
Redhat version or SuSE version? Are you located in the US or elsewhere?
the redhat size is: 2055432139 suse size is: 1755988205
I suggest you try the download from a different internet connection, home or using a different browser.
Let us know the outcome..
regards,
Saar.

Unable to get process chain successful messages via custom program

Similar Messages

Maybe you are looking for