Unable to get the complete drive space in lenovo g580

HI All,
I have new lenovo g580 laptop with DOS operating system. In that i had installed the windowns 7 ultimate. After instalation i had one issue with hard drive partition.
Issue: I am able to get the drive space around 420 GB, reming space it is showing as unallocated space. I am unable to patition that space.
Please suggest me to partition and to use that as general.
please let me know if need any more information.
Thanks in advance,
Krishna

Hi ykrishna,
thanks for posting and welcome to the community. To do this please go to the
Start button > Highlight "Computer" and Right click > Select Manage. (Please see illustration below)
Once done a new window should have opened up. (Please see illustration below)
From here you should be able to see the unpartitioned block. Select the unpartioned block, right click and select "Make partion active". Be sure to assign a proper drive letter aswell.
Hope this helps
Regards

Similar Messages

Unable to get the nvidia driver (proprietary) work

Hi,
I can't get the nvidia-driver work on my Lenovo Thinkpad T61 (Quadro NVS 140M).
At the moment I use the free NV-driver (with hal, no xorg.conf). I deinstalled the xfree86-video-nv package and libgl. Afterwards I installed 'nvidia' and created a minimal xorg.conf via nvidia-xconfigure. When I start the X-Server, the screen stays black, no nvidia-logo- nothing :-(
Dunno what goes wrong. Can someone help?
Thanks and Greetings!

howe wrote:
ngoonee wrote:If your x-server keeps crashing, what do you have to lose?
My work
Its a beta nvidia driver, the WORSE it can do is crash your x-server. Which is what you're experiencing anyway. So net effect on your work is probably 0.
Anyway, just consider it if you decide to try again. I know the feeling of just not having enough time to hack around when REAL work awaits.

How do I open a library book on a recently acquired Samsung Nook? I get "too many activations" error. I have an active adobe digital editions and my other devices work fine. Custumer Support was unable to get the new device activated.

I have a library book on the bookshelf of a newly acquired Samsung Nook but I cannot open it. My other devices work fine but I cannot activate the new unit. I get a "too many activations" error message. Customer Services say I have a valid license but they deemed my problem to be a technical issue and referred me to the forum. Thanks

Step 1 - by trial and error...
So far, I have been able to create physical files containing MP3 and JPG on the NAS using the Windows XP systems to copy from shared locations on the Vista and Win7 boxes. This process has been aided by the use of a 600 GB SATA 2 capable hard drive enclosure. I first attach to Win 7 or Win Vista and reboot to see the local drive spaces formatted on the portable device. Then I copy files from the user's private directories to the public drive space. When the portable drive is wired to an XP box, I can use Windows to move the files from the portable device to the NAS without any of the more advanced file attributes being copied to the NAS. Once the files are on the NAS, I can add the new folder(s) to iTunes on any of the computers and voila, the data becomes sharable via iTunes. So far, this works for anything that I have completely purchased, or for MP3's I made from the AIC files created when I purchased alblums via iTunes.
I have three huge boxes full of vynl records I've accumulated. The ones that I've successfully digitized via a turntable attached to the sound card on one of my computers and third party software, have found their way to the NAS after being imported into iTunes and using it to bring down available album art work. In general I've been reasonably well pleased with the sound quality of digital MP3 files created this way, but the software I've been using sometimes has serious problems automatically separating individual songs from the album tracks and re-converting "one at a time" isn't very efficient.

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Not able to get the complete URL in mail content

Hi All,
I want to give the below link in mail which is sent from workflow, so on click of it, the user will be able to open the particular opportunity directly.
https://<sys_host>%3Fcrm-object-type%3DBT111_OPPT%26crm-object-action%3DB%26crm-object-keyname%3DGUID%26crm-object-value%3DXXXXXXXXXXXX
XXXXX here is GUID of the Opportunity of 32 character.
For this, I have created a attribute of type BAPITGB-LINE. When inserting this expression into the mail activity of the WF, I have chosen the data to be exported as "All lines as cont. text".
In this attribute, when I concatenate the values and the guid, I get only part of the link as below which is 133 characters.
https://<sys_host>%3fcrm-object-type%3dbt111_oppt%26crm-object-action%3db%26crm-object-keyname%3dguid%26cr
When I try to append it in a internal table of type BAPITGB, I am getting the complete URL but with a space between every line in the internal table as below.
https://<sys_host>%3Fcrm-object-type%3DBT111_OPPT[SPACE]%26crm-object-action%3DB[SPACE]
%26crm-object-keyname%3DGUID[SPACE]%26crm-object-value%3D
DFD60A8AD0E53DF1918F0050569F0324
Please let me know, how to avoid this space in append statements. Also, the concatenate is taking only 132 characters, after which it cuts the URL, leaving it incomplete.Kindly correct me if I was wrong somewhere.
Thanks,
Ramya
Edited by: Gali Kling Schneider on Jul 11, 2011 9:47 AM

Hi Sanjay,
As suggested, I have split the URL into 3 links in WF container having the initial values as below.
Link1 -> <sys_host>.%3Fcrm-object-type%3DBT111_OPPT
Link2 -> %26crm-object-action%3DB %26crm-object-keyname%3DGUID
Link3 -> %26crm-object-value%3D
In the mail activity, I have given the link as: &LINK1&&LINK2&&LINK3&&GUID&
&GUID&-> GUID of the opportunity.
When I tested this in log-> List with technical details-> mail, it had the correct value without space as below.
https://<sys_host>.%3Fcrm-object
-type%3DBT111_OPPT%26crm-object-action%3DB
%26crm-object-keyname%3DGUID%26crm-object-value%3DDFD60A8AD0E53DF1918F00505
69F0324
But in SOST, when I checked for the link it is having spaces as below:
https://<sys_host>%20%3Fcrm-object-type%3DBT111_OPPT%20%26crm-object-action%3DB%26crm-object-keyname%3DGUID%20%26crm-object-value%3D%20DFD60A8AD0E53DF1918F0050569F0324
Kindly advice.
Thanks,
Ramya
Edited by: Gali Kling Schneider on Jul 11, 2011 9:48 AM

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

Why iam unable to get the valu from combobox

when i run this code
everytime iam getting blank alert
y iam unable to get the selected item from combo box
thank u
<%@ page import="java.util.Date"%>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%><%@page import="java.sql.*,java.util.*,java.text.*,java.util.ArrayList, java.util.List,org.joda.time.DateTimeConstants,org.joda.time.LocalDate,
org.joda.time.Weeks"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <TITLE>Reading Data From Text Fields</TITLE>
</HEAD><BODY onload=Datevalue()>
     <form name="form1" action ="" method="post" onSubmit="update();">
    <img src="nendrasys_logo.gif" align="right"></img>
<b><font color="669900"><h4 align="left">UserName:</font>
<jsp:useBean id="user" scope="session" class="nendrasys.User" />
<jsp:getProperty name="user" property= "name"/>
&nbsp&nbsp&nbsp&nbsp
<b><font color="90be00"><h4 align="left">Designation:</font>
<jsp:getProperty name="user" property= "designation"/>
<br><font color="669900"><h4 align="right">Project:</font>
    <select name="Projects">
     <option>Project:1</option>
     <option>Project:2</option>
     <option>Project:3</option>
     <option>Project:4</option>
     <option>Project:5</option>
</select>
<%! String s; %>
<% DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd");
        Date date = new Date();
        //out.println(dateFormat.format(date));
            s= dateFormat.format(date);
%>
<select name="Dates" sizes=1 id="dates" onchange="Datevalue(this.value)">
<script type="text/javascript">

</script>
<br><br>
<TABLE BORDER="2" BORDERCOLOR="#336699" CELLPADDING="2" CELLSPACING="2" WIDTH="100%">
<TR>
<TD>&nbsp&nbsp&nbsp</TD>
<TD bgcolor="669900"><label id="sun"></label></TD>
<TD bgcolor="90be00"><label for="mon" id="Mon">Mon</label></TD>
<TD bgcolor="669900"><label for="tue" id="tue">Tue</label></TD>
<TD bgcolor="90be00"><label for="wed" id="wed">Wed</label></TD>
<TD bgcolor="669900"><label for="thu" id="thu">Thu</label></TD>
<TD bgcolor="90be00"><label for="fri" id="fri">Fri</label></TD>
<TD bgcolor="669900"><label for="sat" id="sat">Sat</label></TD>
<TD bgcolor="90be00"><label for="tot" id="tot">Total</label></TD>
</TR>
<tr>
<th>Project Work</th>
<td bgcolor="669900"><input type="text" name="c11" size="2" value="7" onBlur="javascript:document.frm.c12.value = document.frm.c11.value"></td>
<td bgcolor="90be00"><input type="text" name="c12" size="2" value="3"></td>
<td bgcolor="669900"><input type="text" name="c13" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c14" size="2"></td>
<td bgcolor="669900"><input type="text" name="c15" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c16" size="2"></td>
<td bgcolor="669900"><input type="text" name="c17" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c18" size="4"></td>
</tr>
<tr>
<th>Internal N/C</th>
<td bgcolor="669900"><input type="text" name="c21" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c22" size="2"></td>
<td bgcolor="669900"><input type="text" name="c23" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c24" size="2"></td>
<td bgcolor="669900"><input type="text" name="c25" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c26" size="2"></td>
<td bgcolor="669900"><input type="text" name="c27" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c28" size="4"></td>
</tr>
<tr>
<th>Public Holidays</th>
<td bgcolor="669900"><input type="text" name="c31" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c32" size="2"></td>
<td bgcolor="669900"><input type="text" name="c33" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c34" size="2"></td>
<td bgcolor="669900"><input type="text" name="c35" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c36" size="2" ></td>
<td bgcolor="669900"><input type="text" name="c37" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c38" size="4"></td>
</tr>
<tr>
<th>Holidays Taken</th>
<td bgcolor="669900"><input type="text" name="c41" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c42" size="2"></td>
<td bgcolor="669900"><input type="text" name="c43" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c44" size="2"></td>
<td bgcolor="669900"><input type="text" name="c45" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c46" size="2"></td>
<td bgcolor="669900"><input type="text" name="c47" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c48" size="4"></td>
</tr>
</TABLE>
<br>
<center><input type="submit" value="Submit" /> </center>
<%
String username   = request.getParameter("userid");
String pwd = request.getParameter("pwd");
String connectionURL = "jdbc:mysql://localhost:3306/timestamp";
Connection connection = null;
Statement statement = null;
ResultSet rs = null;
String sql=null;
Class.forName("com.mysql.jdbc.Driver").newInstance();
connection = DriverManager.getConnection(connectionURL, "root","nendrasys");
statement = connection.createStatement();
//rs=statement.executeQuery(sql); %>
</form>
<SCRIPT language='Javascript'>
function update()
    alert("ciaoooooo");
    <%
        try
            String value=request.getParameter("c11");
            String value1=request.getParameter("c12");
         //   if(value!=null)
          // System.out.println(value);
           // System.out.println(value1);
        catch(NullPointerException n)
    %>
</script>
<SCRIPT language='Javascript'>
function Datevalue(date)
       // document.getElementById("dates").innerHTML=document.getElementById("sun").value;
alert(date);
         // alert( document.getElementById("dates"))
            <% System.out.println("bye");%>
</SCRIPT>
</BODY>
</HTML>

You mixed Java and Javascript in the expectation that they runs simultaneously.
You are Wrong.
You need to distinguish between the server side languages and client side languages. Java/JSP runs at the server side and produces a HTML page with other client side stuff in it like CSS and Javascript. When the HTML page is finished, it will be sent to the client and then Java/JSP stops. Once the HTML page is arrived at the client, there is no one line Java code in it, only its output/result. Do a View Source in your favourite web browser to see it. Only from that moment on, Javascript runs and/or can be invoked.
Whenever you want to use Java variables in Javascript, you need to print them out as a Javascript variable. Whenever you want to use Javascript variables in Java, you need to invoke a request to the server and pass them as parameters. The request can be either synchronous (a link or a form submit) or asynchronous (ajaxical).

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Oracle 11i release 2 error "Unable to get the current group"

Hi oracle gurus,
I have been trying to install oracle 11g rel 2 on HPUX 11.31 and i am getting the following error
# more installActions2010-01-06_10-27-37AM.log
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/u01/tmp/OraInstall2010-01-06_10-27-37AM
-sourceLoc
/u01/install/database/install/../stage/products.xml
-sourceType
network
-timestamp
2010-01-06_10-27-37AM
INFO: Loading data from: jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigComma
ndMappings.xml
INFO: Loading beanstore from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigC
ommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/
oracle/install/driver/oui/resource/ConfigCommandMappings.xml
SEVERE: [FATAL] An internal error occurred within cluster verification framework
Unable to get the current group.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:11
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Database 11g Release 2 Installer
$
>>
# more oraInstall2010-01-06_10-27-37AM.err
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:11
oracle.cluster.verification.VerificationException: An internal error occurred within cluster verification framework
Unable to get the current group
at oracle.cluster.verification.ClusterVerification.<init>(ClusterVerification.java:200)
at oracle.cluster.verification.ClusterVerification.getInstance(ClusterVerification.java:294)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:407)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
---# End Stacktrace #-----------------------------
<<
$ uname -a
HP-UX rx2600 B.11.31 U ia64 <XXXXXXXX> unlimited-user license
# swlist | grep -i oe
HP-Caliper-PERF C.11.31.04 HP Caliper OE Bundle
HP-WDB-DEBUGGER C.11.31.04 HP DEBUGGER OE Bundle
HPUX11i-DC-OE B.11.31.0903 HP-UX Data Center Operating Environment
# swlist | grep -i qpk
QPKBASE B.11.31.0903.334a Base Quality Pack Bundle for HP-UX 11i v3, March 2009
# swlist -l product | grep -i c++
ACXX C.06.20 HP C/aC++ Compiler
C-ANSI-C C.06.20 HP C/aC++ Compiler
PHSS_37501 1.0 aC++ Runtime (IA: A.06.16, PA: A.03.76)
PHSS_39824 1.0 HP C/aC++ Compiler (A.06.23)
i start the installation as oracle and my group and user id is
$ id
uid=109(oracle) gid=102(oinstall) groups=101(dba),104(asmdba)
Please let me know what else do i need, we might have to use the hardware for testing another application so i am limited in terms of time constraints
any help is much appreciated, Thank you!!
Regards,
Dasjith
Edited by: user10247524 on Jan 6, 2010 7:52 AM

Hi Stig Sundqvist
Where can i find MOS Doc 983713.1 ??You have to login https://support.oracle.com/CSP/ui/flash.html and you have to CSI account. This site is oracle site for tech. documents for can rise SR etc.. for more details please check
What is CSI:
Re: Installing Oracle Database 10.2.0.4
And how do i do to fix this problem ????Login metalink then find upper note and follow document
Hope it helps
Regard
Helios

Powershell script to get the low disk space on the servers...

Hi,
We have many SQL & Sharepoint servers running on windows server. I need some Powershell script to get the low disk space on those servers and it should send an mail alert saying "Disc d:\ have less than threshold 15% free space".
Awaiting for response.
Thanks
Anil

you should be able to use this powershell script which you can run as a scheduled task.
just change the details at the start of the script to point the script to the right location to create log files. you will need to have a plain text file containing a list of server names or ip addresses that you want to check drive space on.
# Change the following variables based on your environment
#specify the path to the file you want to generate containing drive space information
$html_file_dir = "\\server\share\DriveSpace"
#specify the path and file name of the text file containing the list of servers names you want to check drive space on - each server name on a seperate line in plain text file
$server_file = "\\server\share\servers.txt"
#speicfy the from address for the email
$from_address = "[email protected]"
#specify the to address for the email
$to_address = "[email protected]"
#specify the smtp server to use to send the email
$email_gateway = "smtp.domain.com" # Can either be DNS name or IP address to SMTP server
# The seventh line from the bottom (line 167) is used if your smtp gateway requires authentication. If you require smtp authentication
# you must uncomment it and set the following variables.
$smtp_user = ""
$smtp_pass = ""
# Change the following variables for the style of the report.
$background_color = "rgb(140,166,193)" # can be in rgb format (rgb(0,0,0)) or hex format (#FFFFFF)
$server_name_font = "Arial"
$server_name_font_size = "20px"
$server_name_bg_color = "rgb(77,108,145)" # can be in rgb format (rgb(0,0,0)) or hex format (#FFFFFF)
$heading_font = "Arial"
$heading_font_size = "14px"
$heading_name_bg_color = "rgb(95,130,169)" # can be in rgb format (rgb(0,0,0)) or hex format (#FFFFFF)
$data_font = "Arial"
$data_font_size = "11px"
# Colors for space
$very_low_space = "rgb(255,0,0)" # very low space equals anything in the MB
$low_space = "rgb(251,251,0)" # low space is less then or equal to 10 GB
$medium_space = "rgb(249,124,0)" # medium space is less then or equal to 100 GB
#### NO CHANGES SHOULD BE MADE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING
# Define some variables
$ErrorActionPreference = "SilentlyContinue"
$date = Get-Date -UFormat "%Y%m%d"
$html_file = New-Item -ItemType File -Path "$html_file_dir\DiskSpace_$date.html" -Force
# Create the file
$html_file
# Function to be used to convert bytes to MB or GB or TB
Function ConvertBytes {
param($size)
If ($size -lt 1MB) {
$drive_size = $size / 1KB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' KB'
}elseif ($size -lt 1GB){
$drive_size = $size / 1MB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' MB'
}ElseIf ($size -lt 1TB){
$drive_size = $size / 1GB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' GB'
}Else{
$drive_size = $size / 1TB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' TB'
# Create the header and footer contents of the html page for output
$html_header = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html lang="en-US" xml:lang="en-US" xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Server Drive Space</title>
<style type="text/css">
.serverName { text-align:center; font-family:"' + $server_name_font + '"; font-size:' + $server_name_font_size + `
'; font-weight:bold; background-color: ' + $server_name_bg_color + '; border: 1px solid black; width: 150px; }
.headings { text-align:center; font-family:"' + $heading_font + '"; font-size:' + $heading_font_size + `
'; font-weight:bold; background-color: ' + $heading_name_bg_color + '; border: 1px solid black; width: 150px; }
.data { font-family:"' + $data_font + '"; font-size:' + $data_font_size + '; border: 1px solid black; width: 150px; }
#dataTable { border: 1px solid black; border-collapse:collapse; }
body { background-color: ' + $background_color + '; }
#legend { border: 1px solid black; ; right:500px; top:10px; }
</style>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body>'
$html_footer = '</body>
</html>'
# Start to create the reports file
Add-Content $html_file $html_header
# Retrieve the contents of the server.txt file, this file should contain either the
# ip address or the host name of the machine on a single line. Loop through the file
# and get the drive information.
Get-Content $server_file |`
ForEach-Object {
# Get the hostname of the machine
$hostname = Get-WmiObject -Impersonation Impersonate -ComputerName $_ -Query "SELECT Name From Win32_ComputerSystem"
$name = $hostname.Name.ToUpper()
Add-Content $html_file ('<Table id="dataTable"><tr><td colspan="3" class="serverName">' + $name + '</td></tr>
<tr><td class="headings">Drive Letter</td><td class="headings">Total Size</td><td class="headings">Free Space</td></tr>')
# Get the drives of the server
$drives = Get-WmiObject Win32_LogicalDisk -Filter "drivetype=3" -ComputerName $_ -Impersonation Impersonate
# Now that I have all the drives, loop through and add to report
ForEach ($drive in $drives) {
$space_color = ""
$free_space = $drive.FreeSpace
$total_space = $drive.Size
$percentage_free = $free_space / $total_space
$percentage_free = $percentage_free * 100
If ($percentage_free -le 5) {
$space_color = $very_low_space
}elseif ($percentage_free -le 10) {
$space_color = $low_space
}elseif ($percentage_free -le 15) {
$space_color = $medium_space
Add-Content $html_file ('<tr><td class="data">' + $drive.deviceid + '</td><td class="data">' + (ConvertBytes $drive.size) + `
'</td><td class="data" bgcolor="' + $space_color + '">' + (ConvertBytes $drive.FreeSpace) + '</td></tr>')
# Close the table
Add-Content $html_file ('</table></br><div id="legend">
<Table><tr><td style="font-size:12px">Less then or equal to 5 % free space</td><td bgcolor="' + $very_low_space + '" width="10px"></td></tr>
<tr><td style="font-size:12px">Less then or equal to 10 % free space</td><td bgcolor="' + $low_space + '" width="10px"></td></tr>
<tr><td style="font-size:12px">Less then or equal to 15 % free space</td><td bgcolor="' + $medium_space + '" width="10px"></td></tr>
</table></div>')
# End the reports file
Add-Content $html_file $html_footer
# Email the file
$mail = New-Object System.Net.Mail.MailMessage
$att = new-object Net.Mail.Attachment($html_file)
$mail.From = $from_address
$mail.To.Add($to_address)
$mail.Subject = "Server Diskspace $date"
$mail.Body = "The diskspace report file is attached."
$mail.Attachments.Add($att)
$smtp = New-Object System.Net.Mail.SmtpClient($email_gateway)
#$smtp.Credentials = New-Object System.Net.NetworkCredential($smtp_user,$smtp_pass)
$smtp.Send($mail)
$att.Dispose()
# Delete the file
Remove-Item $html_file
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
Might try this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Installing 7.2. Says "Unable to install the gear driver set at this time...

Hello, Im trying to Install ITunes 7.2, and I get this error:
"Unable to install the gear driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again"
I am installing ITunes for the very first time on my comp, cuz I just received a new 2GB Nano.
I've tried rebooting,tried uninstalling my Quicktime and removing it from my comp, uninstalled and cleaned any remnants of previous ITunes using the windows cleaner, disabling both my mcafee and pccillin, and it still comes up with the error.
I'd be indebted to any suggestions or resolutions!
Thank you!
E Machines T6216 Windows XP

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Photoshop elements 12 Unable to get the sharing (email) to work.

Hi, The sharing (emailing) feature talks about using other email client but can not??? I have Outlook 2013. the other option is to use the adobe email service that needs to verify the email that I am using but does not send the verification code that I need to activate the feature. I have Windows 8. Elements Organizer 12.0.0.0
Core Version: 12.0 (20130903.r.43239)
Language Version: 12.0 (20130903.r.43239)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
Catalog Size: 43.1MB
Catalog Cache Size: 187.1MB
System:
Operating System Name: Windows 8
Operating System Version: 6.2
System Architecture: Intel CPU Family:6 Model:5 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 7.9GB
Free Memory: 4.5GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 11.0
Adobe Acrobat Version: Not installed
CD and DVD drives:
D: (MATSHITA DVD+-RW BUS: 2 ID: 2 Firmware: UJ8E2)

Thank you very much.
AL
From: Bill Hunt [email protected]
Sent: Tuesday, January 28, 2014 2:22 PM
To: aladvantage
Subject: Photoshop elements 12 Unable to get the
sharing (email) to work.
Re: Photoshop elements 12 Unable to get the sharing (email) to work.
created by Bill Hunt <http://forums.adobe.com/people/the_wine_snob> in
*Premiere
Elements* - View the full
discussion<http://forums.adobe.com/message/6061690#6061690

"Unable to install the GEAR driver set at this time...."

Hello, I have been having trouble installing iTunes. I uninstalled it because I wasn't able to put songs on my iPod. And when I tried to reinstall it, I got this error:
"Unable to install the GEAR driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again"
First off, I don't even have iTunes installed any more. Second, I don't know what the heck the GEAR driver is.
Please help!
--Jon

When you get this message, you may need to manually remove your gear drivers, see the following post which links to full instructiosn:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
It requires editing the registry so be careful.

"Unable to install the GEAR driver set." in Vista Premium solution!

If you're getting the "Unable to install the GEAR driver set." error, go into regedit, navigate to HKEYLOCALMACHINESYSTEMCurrentControlSetServicesGearAspiWDM and delete the DeleteFlag key. Run the iTunes upgrade/setup package and iTunes should install correctly.
If you get an error about explorer.exe being open, use the Tasks section of Task Manager to stop the explorer.exe application.

Is this 64 or 32 bit Vista?

Unable to get the complete drive space in lenovo g580

Similar Messages

Maybe you are looking for