Unable to get the Text proerty of Range class

Hi,
I am using the Text property of Range class for excel template development using VSTO.While reloading the template i am getting the error "Unable to get the Text proerty of Range class".If i skip this line of code,i am getting similar kind of errors while accessing the properties of Range class(like Range.copy() ,Range.Locked, Range.EntireRow.Hidden).In all these cases i am getting the similar kind of error "unable to get the property of Range Class".
Waiting for a quick response...
Thanks in advance..

Hi Besse,
Actully, the error is coming when i try to populate datatable with the the range values in one of the sheet.
I am using the below code.
//"wsInteropMetadata" is the sheet object.
//"RangeName" is the range name in the sheet.
rngConfig = wsInteropMetadata.get_Range("RangeName", Type.Missing);
for (int iRow = 1; iRow <= iRowCnt; iRow++)
    dRNew = dTMetadataTable.NewRow();
    for (int iCol = 1; iCol <= iColCnt; iCol++)
      rngCell = (Excel.Range)rngConfig.Cells[iRow, iCol];
      dRNew[iCol - 1] = rngCell.Text.ToString();
   dTMetadataTable.Rows.Add(dRNew);
In the first load of the template,this code is working fine.In the reload i am getting the error at "rngCell.Text".If i see in quickwatch,most of the properties of  "rngCell" object are throwing "System.Runtime.InteropServices.COMException".See the below exception information.
Exception Information
Exception Type: System.Runtime.InteropServices.COMException
Message: Unable to get the Text property of the Range class
Source: Microsoft Office Excel
ErrorCode: -2146827284
Thanks
Krishna.

Similar Messages

How to get the text of a message class

Hi,
I have a message class and added few message(with attributes) to that class.
Now i want to read the text of the message based on the attributes and
the message no.
Example:
Message 19 is - Where is &1. Where is &1. Where is &1. Where is &1.
Information that i have :
    ls_msg-msgty = 'S' .
    ls_msg-msgid = 'AP_JATT_TDC_MSG_CL'.
    ls_msg-msgno = 19 .
    ls_msg-msgv1 = 'A'.
    ls_msg-msgv1 = 'B'.
    ls_msg-msgv1 = 'C'.
    ls_msg-msgv1 = 'D'.
From the info that i have i want the text
Where is A. Where is B. Where is C. Where is D.
Is there any function modules which will provide me these details?
Regards,
Bikash.

HI
You can get the Text based on the Message attributes using the FMs
FORMAT_MESSAGE
MESSAGE_TEXT_BUILD.
Use any one of them..
It will work for u...
<b>reward if Helpful</b>

Why iam unable to get the valu from combobox

when i run this code
everytime iam getting blank alert
y iam unable to get the selected item from combo box
thank u
<%@ page import="java.util.Date"%>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%><%@page import="java.sql.*,java.util.*,java.text.*,java.util.ArrayList, java.util.List,org.joda.time.DateTimeConstants,org.joda.time.LocalDate,
org.joda.time.Weeks"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <TITLE>Reading Data From Text Fields</TITLE>
</HEAD><BODY onload=Datevalue()>
     <form name="form1" action ="" method="post" onSubmit="update();">
    <img src="nendrasys_logo.gif" align="right"></img>
<b><font color="669900"><h4 align="left">UserName:</font>
<jsp:useBean id="user" scope="session" class="nendrasys.User" />
<jsp:getProperty name="user" property= "name"/>
&nbsp&nbsp&nbsp&nbsp
<b><font color="90be00"><h4 align="left">Designation:</font>
<jsp:getProperty name="user" property= "designation"/>
<br><font color="669900"><h4 align="right">Project:</font>
    <select name="Projects">
     <option>Project:1</option>
     <option>Project:2</option>
     <option>Project:3</option>
     <option>Project:4</option>
     <option>Project:5</option>
</select>
<%! String s; %>
<% DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd");
        Date date = new Date();
        //out.println(dateFormat.format(date));
            s= dateFormat.format(date);
%>
<select name="Dates" sizes=1 id="dates" onchange="Datevalue(this.value)">
<script type="text/javascript">

</script>
<br><br>
<TABLE BORDER="2" BORDERCOLOR="#336699" CELLPADDING="2" CELLSPACING="2" WIDTH="100%">
<TR>
<TD>&nbsp&nbsp&nbsp</TD>
<TD bgcolor="669900"><label id="sun"></label></TD>
<TD bgcolor="90be00"><label for="mon" id="Mon">Mon</label></TD>
<TD bgcolor="669900"><label for="tue" id="tue">Tue</label></TD>
<TD bgcolor="90be00"><label for="wed" id="wed">Wed</label></TD>
<TD bgcolor="669900"><label for="thu" id="thu">Thu</label></TD>
<TD bgcolor="90be00"><label for="fri" id="fri">Fri</label></TD>
<TD bgcolor="669900"><label for="sat" id="sat">Sat</label></TD>
<TD bgcolor="90be00"><label for="tot" id="tot">Total</label></TD>
</TR>
<tr>
<th>Project Work</th>
<td bgcolor="669900"><input type="text" name="c11" size="2" value="7" onBlur="javascript:document.frm.c12.value = document.frm.c11.value"></td>
<td bgcolor="90be00"><input type="text" name="c12" size="2" value="3"></td>
<td bgcolor="669900"><input type="text" name="c13" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c14" size="2"></td>
<td bgcolor="669900"><input type="text" name="c15" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c16" size="2"></td>
<td bgcolor="669900"><input type="text" name="c17" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c18" size="4"></td>
</tr>
<tr>
<th>Internal N/C</th>
<td bgcolor="669900"><input type="text" name="c21" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c22" size="2"></td>
<td bgcolor="669900"><input type="text" name="c23" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c24" size="2"></td>
<td bgcolor="669900"><input type="text" name="c25" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c26" size="2"></td>
<td bgcolor="669900"><input type="text" name="c27" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c28" size="4"></td>
</tr>
<tr>
<th>Public Holidays</th>
<td bgcolor="669900"><input type="text" name="c31" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c32" size="2"></td>
<td bgcolor="669900"><input type="text" name="c33" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c34" size="2"></td>
<td bgcolor="669900"><input type="text" name="c35" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c36" size="2" ></td>
<td bgcolor="669900"><input type="text" name="c37" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c38" size="4"></td>
</tr>
<tr>
<th>Holidays Taken</th>
<td bgcolor="669900"><input type="text" name="c41" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c42" size="2"></td>
<td bgcolor="669900"><input type="text" name="c43" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c44" size="2"></td>
<td bgcolor="669900"><input type="text" name="c45" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c46" size="2"></td>
<td bgcolor="669900"><input type="text" name="c47" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c48" size="4"></td>
</tr>
</TABLE>
<br>
<center><input type="submit" value="Submit" /> </center>
<%
String username   = request.getParameter("userid");
String pwd = request.getParameter("pwd");
String connectionURL = "jdbc:mysql://localhost:3306/timestamp";
Connection connection = null;
Statement statement = null;
ResultSet rs = null;
String sql=null;
Class.forName("com.mysql.jdbc.Driver").newInstance();
connection = DriverManager.getConnection(connectionURL, "root","nendrasys");
statement = connection.createStatement();
//rs=statement.executeQuery(sql); %>
</form>
<SCRIPT language='Javascript'>
function update()
    alert("ciaoooooo");
    <%
        try
            String value=request.getParameter("c11");
            String value1=request.getParameter("c12");
         //   if(value!=null)
          // System.out.println(value);
           // System.out.println(value1);
        catch(NullPointerException n)
    %>
</script>
<SCRIPT language='Javascript'>
function Datevalue(date)
       // document.getElementById("dates").innerHTML=document.getElementById("sun").value;
alert(date);
         // alert( document.getElementById("dates"))
            <% System.out.println("bye");%>
</SCRIPT>
</BODY>
</HTML>

You mixed Java and Javascript in the expectation that they runs simultaneously.
You are Wrong.
You need to distinguish between the server side languages and client side languages. Java/JSP runs at the server side and produces a HTML page with other client side stuff in it like CSS and Javascript. When the HTML page is finished, it will be sent to the client and then Java/JSP stops. Once the HTML page is arrived at the client, there is no one line Java code in it, only its output/result. Do a View Source in your favourite web browser to see it. Only from that moment on, Javascript runs and/or can be invoked.
Whenever you want to use Java variables in Javascript, you need to print them out as a Javascript variable. Whenever you want to use Javascript variables in Java, you need to invoke a request to the server and pass them as parameters. The request can be either synchronous (a link or a form submit) or asynchronous (ajaxical).

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

Unable to get the values from PAYLOAD

Hi,
i'm unable to get the values of payload. When i use
currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
Element payload = (Element)currentTask.getPayloadAsElement();
node = (Element)payload.getFirstChild();
System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
I get null but i instantiate the bpel process with a value and i have
- <payload>
- <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
<ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
<ns1:documentName>bvnbvnvn</ns1:documentName>
<ns1:URI>http://www.first.pt</ns1:URI>
<ns1:assignees>gestdoc</ns1:assignees>
<ns1:groups />
</ns1:DocumentReviewProcessRequest>
</payload>
if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
I get a normal erro 'cause this variable don't exist...
Can someone please help me?
Thanks!!

I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps.

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

Unable to get the response from dynamic partnerlink

Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
Srikanth

Hi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

Unable to get the media from the Endeca Experience manager version 11.0.0

Hi.,
Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
ThankYou!!!
C:\>cd Endeca\apps\CRS\control
C:\Endeca\apps\CRS\control>get_media.bat
[07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
[07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
[07.04.14 11:48:10] INFO: Definition updated.
[07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
[07.04.14 11:48:11] INFO: Finished exporting resource.

What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

In popup step how do I get the "text on the button" in the report rather than button index?

(1)
How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
OUT PUT IS 30?" button hit.
(2)
In popup step how do I get the "text on the button" in the report rather than button index?
File attached
Attachments:
test_stand.zip ‏32 KB

The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
The easiest is to use the reporttext.
In a post expression, you can use something like
Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
Just my 2cents
S.
// it takes almost no time to rate an answer
Attachments:
IncludeButtonTextInReport2_0.seq ‏18 KB

How can I get the text value of an XML element in MXML ?

Hi,
I have the following XML loaded into a variable of type XML :
<properties>
     <comment>RIMpro Data Collector Configuration</comment>
     <entry key="server.pear.username"/>
     <entry key="server.apple.retry.times">5</entry>
     <entry key="rdc.proxy.host">http://192.168.1.2:8080</entry>
/properties>
I can easily get the key attribute displayed in a DataGridColumn by setting the dataProvider to my variable and the dataField to "@key". But I do not know how to get the text value in a second column... Is there a way or do I need to change my XML to something like this :
<properties>
     <comment>RIMpro Data Collector Configuration</comment>
     <entry key="server.pear.username"/>
     <entry key="server.apple.retry.times" value="5"></entry>
     <entry key="rdc.proxy.host" value="http://192.168.1.2:8080"></entry>
/properties>
Many thanks in advance.
Marc

yes, you'd better modify your XML structure to fit the DataGrid internals.
Since dataField pattern require each grid row item to have a named property to be displayed, otherwise you'll be forced to overcome this pattern using custom labelFunction for the particular column which will implement your custom actions on how to extract appropriate data for that column out of grid row item. It will be much more complicated than just rearranging your xml structure.

Unable to get the Text proerty of Range class

Similar Messages

Maybe you are looking for