Unable to hide the first page in the form

Hi ,
I am trying to design a dynamic form that has three pages. The form is being used in a LiveCycle process and during the process initiation, only the second page should be visible and the first and third pages should be hidden. I am trying to hide the first and the third pages using JavaScript. I noticed that the third page is being hidden but the first page gets displayed as an empty page. Based on this behavior here are couple of questions I need guidance with
Can we hide the first page within a form? If so why am I seeing this inconsistent behavior when hiding the first and third pages?
If the first page can not be hidden then is there a workaround to achieve my goal of re-arranging the pages so that I can add content to the first page dynamically and shift the previous content on the first page to the second page?
Any suggestions will be appreciated.
Thanks,
Samanthapudi

Hi,
You've originally said.
in the first page i don't want data in main window...
yet using a command node to trigger the next page means you have to include a (presumably) empty main window in the first page.
Your main window has to contain some output (a table usually) and it's contents are the same on every page (only it's height can change). So, you can't have a blank main window on page 1 and a main window with data on pages 2 and 3.
Remove the main window from page 1, set page2 as the next page for page 1.
As for how to trigger page 3 you'll need to provide more detail on what the condition is. Do you want multiple copies of page 2 to hold all of the main window data, or just one? Do you want one copy of page 2 then the rest of the data on multiple copies of page 3. Be specific.
Regards,
Nick

Similar Messages

Error while creating task: The server was unable to save the form at this time. Please try again. (SharePoint 2013)

I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?

Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support

The server was unable to save the form at this time. Please try again - tried the trust standards...

2013 standard sharepoint server. Content DBs were on a Trial enterprise server and copied over to standard server. All was good on trial server.
there are 8 sites on server, 2 of the sites cannot create or edit items, they get "The server was unable to save the form at this time. Please try again"
googling around i tried everything. restarted search host controller, checked ram usage (8gb free), manage content types, iisresets, edit the web.config file ( add things for ram, search host, etc), no alternate access mappings, .net HTTP activation, rebooted
server... I'm sure i missed some.
The server is new install, all but the August HF CUs. Trial server the content DBs came from is at same level.
It is not a server level issue as the other 6 sites are fine. its something with just 2 sites.
kinda stuck here...
Thanks,
Scott<-

With the USL Logs were hard to track down what was happening, though I think it was too do with /_vti_bin/client.svc/ProcessQuery.
I did the Enable/Disable Anonymous Access on the Directory with no luck.
Brought up Fiddler and Saw that I was getting 401 and 500 Errors on
GET http://team.intranet.eandm.com/it/_vti_bin/client.svc/ProcessQuery HTTP/1.1
So it had something to do with Permissions. I checked the Authentication and the sites that worked had Forms Auth Enabled, and the ones that didn't, didn't have forms Auth enabled. Enabling it manually was no go.
I then went though the web.config on the working and non-working sites and there were some differences. The Authentication was Forms on the working site, Windows on the nonworking. There was many things not present. httpModules section was missing,
Many of the Microsoft Identity /Authentication lines etc.
So I Basically took the web.config from the working site and copied it to the non-working site preserving the following line from the original web.config:
<machineKey validationKey="{key}" decryptionKey="{key}" validation="{hash}" />
After that I had Security Issues, Though I think this was Caused by the July 2014 CU making everything use the Microsoft Identity parts, where as the server I was porting form had the sites created before the July 2014 CU. (though both were at the same level)
Even though all of the users were present in the site security, I had to Drop and re-add them to every site/and list with special Perms.
With the Security Fixed, I no longer received the Error "The server was unable to save the form at this time. Please try again"
Knock on wood its all functioning fine.

The server was unable to save the form at this time. Please try again

Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
If I try to add or modify an item in the list by clicking 'add new item' I get "The
server was unable to save the form at this time. Please try again."
I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?

One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
Please try again."
This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
of "Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any.

Error:- The server was unable to save the form at this time. Please try again.

Hi,
I have SP 2013 intranet sites.
I am trying to edit the list item in site and getting the error "The server was unable to save the form at this time. Please try again."
I read many article on this forum. to chck web.config file, to restart
“SharePoint Search Hosting Controller” But no help.
Still i am getting this. what could be the reason now.
Please provide the resolution. I am trying to resolve this from last two days.
Thanks,
Rakesh

Normally, there's something wrong with the form responsible for editing list items. Is it customized? If not, you could use the free SharePoint Designer tool to delete the current form, create a new one (wait some time before caching issues are solved)
and you should be good to go. If it is customized, contact the team responsible for managing it.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.

Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.

thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms.

How to hide the Form Feed char in JTextArea

We have reports (written in C) that are being displayed in a JTextArea.
In our old app, the Form Feed character (ASCII 12) was invisible naturally without having to code around it. In a JTextArea, it appears as a "[]" character. Does anyone know how to make this character invisible to the JTextArea? Removing it is not an option, as it is needed for it's print routine.
I've been searching these forums and the web all morning with no luck.

Not sure how the Form Feed character worksIt lets the printer know that a new page is to be started at that point.
Does it always appear with the New Line character?Usually but not always.
Thanks for the reply. It's more involved than just printing standard lines of text, so perhaps I should have been more clear.
The C report already has pagination built in from when it was run from our legacy GUI. In other words, each report knows how many chars wide and how many lines down each page will be. It is different for each report, but they all hover around 150 chars wide and 60 lines down per page, since they are all presented to the user (and printed) in landscape.
In the C code: at the end of each report line a "\n" is appended. At the end of each page, an ASCII 12 character is appended. A header is at the top of each page (different for each report, but usually 2 or 3 lines) that shows the page # and other info.
So, as you are viewing the report, you would see page 1 header, some report content, page 2 header, some more report content, page 3 header, etc. as you scroll down.
So now if you view it in Java: if the user wishes to print, the report is sent to our ReportPrinter class, who tokenizes the report based on "\f" and makes a ReportPage object (implements Printable) for each token. Each ReportPage is then appened to a java.awt.print.Book object, who in turn is sent to the PrinterJob.
Given that the report already has his pages figured out and has a form feed char at the end of each page, the report comes in to the JTextArea with [] chars preceding each page header (approximately every 60th line, depending on the report).
I tried using a JTextPane, but no luck. It was also much slower reading in the report. I just want the textpane to not display the non-printable characters ("\f" in this case).

Unable to edit the form in Personal Change Request

Hi,
One of the manager is trying to edit the employees information. When he navigates to edit form of personal change request, under My Crew tab of Manager Self Service in portal, unable to edit the information but he is able to add notes. in the form.
In detail, the manager is trying to assign new manager to an employee under him(moving an employee to differen team headed by different manager so trying to replace his name in the employee's informaton). The manage is unable to change the information or unable to edit any information in the form "request for change in position/transfer"
Could someone help me on this.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 17, 2010 9:15 PM

Hi,
The issue is resolved. This is because of Acrobat JavaScript option disabled in display preferences of the form.
Once this checkbox is enabled its working fine.
Regards,
Ravi.

I'm unable to clear my search history after many attempts with the firefox instructions as I'm unable to check the "Form and Search History" box for some reason

I've tried several times to clear my search history without any success. I've been able to do so in the past, but this is the first time I've tried in a while and for some reason it will not let me check the box for "Form and Search History." Then sometimes it will let me check that box, but when I click "ok" to apply the clearing of the search history, nothing happens and it still remembers all my sites. At that point I try to clear it again and its back to not letting me check the "Form and Search history" box (I've gone through this cycle a few times). I tried looking through some of suggested articles that Firefox sent me too, but I don't know much about computers and just doing the things they seem talking about isn't working either. Please help, thanks!

It seems to have worked itself out. Thanks anyway!

Unable to see the forms in planning applications....

Hi ...
I noticed that in planning many application forms are not working....
Its showing that *"The Form is Invalid..Check log for details"* ....Please suggest me
Regards,
Prabhas
Edited by: P on Feb 7, 2011 10:46 PM

Either your Essbase cubes are down or forms are really invalid based on definition.
First review all of your Planning logs on your application server on 11.1.1 environments this will be in <INSTALL_DIRVE>\Hyperion\logs\services -- review the out and error files for planning.
Confirm you can connect to each essbase database for the respective forms.
On a simple form verify the dimensions both within planning and within Essbase. Planning will not generally let you delete members which are on a form. If someone directly edited Essbase and removed a key member or something more invasive that will definitely cause issues as Planning must structually match Essbase.
Since you seem to be new to Essbase based on one of your other queries I suggest you open a case up with Oracle Support to actually get someone to look at your system real-time.
Regards,
John A. Booth
http://www.metavero.com

Hide the form field

hai...
i have a form which has
three fileds,in that one fields set as
as a combo box,in that combobox i have two
values internal and external,if i click
internal means it hidden the thrid field
how can i hide the field
thanks in advance
bijesh

Hi,
Seems that the images in your post are broken, it would be better if you could edit your post and upload the correct images again, others who with the similar questions would get something helpful from it.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Unable to run the form from Form Builder 10g

HI,
I am having a problem with running a form with form builder 10g.
I have create a form with some text boxes to display values in a table.
When i compile and run the form it does not run The error shown is
HTTP 403(Forbidden) You are not authorised to view this page.
The Link used for the above is:
http://127.0.0.1:1740/sWuCqhMKUT1btA1N5cXLCRshkJzmgKRIlCEUFd9RL520LVq0
The port number 1740 changes everytime. I dont know why.
I have started the OC4J instance before starting the Form Builder.
I have made the changes to the runtime preferences in the form builder.
http://localhost:8889/forms/frmservlet
But it doesn't work when i try to run the form from Form Builder.
ie Program-->Run Form
The form works properly when using the 'Run a form on the Web Utility' provided with Developer Suite.
Can anyone please suggest a solution. I have searched the forum but didnot find a solution.
Thanks
V.S.

One of our DBAs has installed the software.
It was a default installation, I believe, as no configuration was done during the installation except for increasing the virtual memory size.
Post installation we changed the tnsnames.ora file and the sqlnet.ora file.
Do i need to configure something ?
Thanks,
V.S.

Unable to run the form in another Widow

Hi Form,
I have configured the Oracle 10gDS on WindowsXP Professional to work with Oracle 9i Database. When I am executing a form instead of opening in a seperate Browser window, it is opening in the same browser windows. What are all the requisite changes I should make in formsweb.cfg.
Help is very much appreciated.

Dear Tony and Tomas,
my problem is :
when launching oracle forms it is not displayed in a seperate java applet window.
here is the formsweb.cfg file of my 10g OC4J server.
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=F:\Oracle10gDS
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[test] -------------------------- This is where I have set application parameters
imageBase=codeBase
lookAndFeel=oracle
colorscheme=blue
seperateFrame=true
logo=none
background=none
splashscreen=no
archive_jini=frmall_jinit.jar
archive=frmall.jar
height=1024
width=768
form=E:\Personal\Healinx\Forms\Healinx.fmx
userid=iheal_admin/iheal_admin@iheal
baseHTMLie=basejpi.htm
default .env file is as follows.
# $Id: default.env 14-apr-2005.13:22:43 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=F:\Oracle10gDS
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. c:\test\dir1;c:\test\dir2)
FORMS_PATH=F:\Oracle10gDS\forms;E:\Personal\Healinx\Forms;
# webutil config file path
WEBUTIL_CONFIG=F:\Oracle10gDS\forms\server\webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_RESTRICT_ENTER_QUERY=TRUE
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# F:\Oracle10gDS\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=F:\Oracle10gDS\bin;F:\Oracle10gDS\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>\forms\server
# System settings
# You should not normally need to modify these settings
FORMS=F:\Oracle10gDS\forms
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=F:\Oracle10gDS\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;F:\Oracle10gDS\jlib\repository.jar;F:\Oracle10gDS\jlib\ldapjclnt10.jar;F:\Oracle10gDS\jlib\debugger.jar;F:\Oracle10gDS\jlib\ewt3.jar;F:\Oracle10gDS\jlib\share.jar;F:\Oracle10gDS\jlib\utj.jar;F:\Oracle10gDS\jlib\zrclient.jar;F:\Oracle10gDS\reports\jlib\rwrun.jar;F:\Oracle10gDS\forms\java\frmwebutil.jar
Kindly advice what should be done.

Unable to get the form displayed in Working Time

Hi,
We are implementing ESS with ECC5.0 on EP6. When I go for Working time and click on Time Statement for a Chosen period .. below it doesn't display me the form needed.
I have checked from the Tx : HRFORMS, the Form Name :SAP_TIM_99_0001 & 0002 are active.
Is there anything else i need to configure at the r/3 end to get that display on portal?
Need help on this ..
Thnks in advance.
Vijay

Hi Aniket,
To the Clusters .. do you mean at the j2ee engine side?can you please give me info in detail
Thnx for valuable inputs
Vijay
Message was edited by:
NR

1 Unable to retrieve the form values entered by the user from the xpath expression(with or without s

1.1 Description of the Workflow
We have designed a Workflow, which has an init form HighLevelQuestionnaire.
1. The user attempts to start the workflow by submitting this form, which has an XML schema embedded.
2. When user submits the data, we set workflow variables to fetch data from the init-form and all the values entered by the user are stored in the database.
3. Based on the values, value of Risk Level is calculated to be either High or Medium, and user is routed to one of the two routes.
4. The user QPAC is used to show the next form to the user.
Another form has been designed called AssessRisk in which user is asked to confirm the Risk Level.
5. At this point, we use Script QPAC to print the values in the log.
1.2 Problem description
1. In the Point No. 6 of the workflow, the values are not printed in the log. A blank space is printed instead.
2. Initially, we embedded the schema in the form. But when values were not printed, we removed the schema. Even then it didnt work.
1.2.1 User QPAC Specifications
Properties of user QPAC used in Step 4 of the workflow
Mappings Tab: -
Input Variable --- No variable
Template URL ----- Form11.xdp
Output Variable ---- myform
Myform is a form-variable, which has template URL as Form11.xdp
1.2.2 Script QPAC
1.2.2.1 With XML Schema embedded
import com.adobe.workflow.pat.service.*;
System.out.println("----------- High Level Questions -----------");
System.out.println("--1- the RiskLevel is: " + patExecContext.getProcessDataStringValue("/process_data/myform/form-data/data/xdp/dataset s/data/RiskLevel/general/Risk_Level") + " @@@@@");
Note:- Here RiskLevel is the schema root of myform and Risk_Level is the schema variable mapped with textfield on the form
1.2.2.2 Without XML Schema embedded
System.out.println("--1.1- the RiskLevel is: " + patExecContext.getProcessDataStringValue("/process_data/myform/form-data/data/xdp/dataset s/data/fields/Risk_Level") + " @@@@@");
1.2.2.3 Conclusion
In both the cases, a blank value is printed. In both the cases, we get some output which is when we use
System.out.println("--1.1- the RiskLevel is: " + patExecContext.getProcessDataStringValue("/process_data/myform/form-data/data/xdp/dataset s/data ") + " @@@@@");
In this case all the values are printed with space in between.
This is the basic feature which has to be used while developing workflows.

Hi
You might want to try using VariableLogger, at:
http://www.avoka.com/avoka/qpac_library.shtml
It's a little more reliable than the script QPAC, especially if one of your xpath expressions is wrong.
Please note that embedding the schema makes no difference in how the data from the form is stored. What makes the difference is whether your fields are bound to specify schema elements, or whether they use the "normal" binding.
Howard

Unable to hide the first page in the form

Similar Messages

Maybe you are looking for