Unable to install routing agent on Exchange 2010
Hi,
I am trying to install a Routing Agent(C#)compiled in VS2010(I tried for Target version NET 3.5 and for Target version NET 4.0) against an Exchange 2010 SP2 environment but receives this error:
"Could not load file or assembly 'file:///D:\EXCH\Public\TransportAgent2010.dll' or one of its dependencies. This assembly is built by a runtime newer than currently loaded runtime and cannot be loaded.
+ CategoryInfo : InvalidArgument: (:) [Install-TransportAgent], BadImageFormatException
+ FullyQualifiedErrorId :3BBA3521,Microsoft.Exchange.Management.AgentTasks.InstallTransportAgent"
I copied Microsoft.Exchange.Data.Common.dll and Microsoft.Exchange.Data.Transport.dll from server machine to my build machine. I referenced these 2 dlls in my project. As I already mentioned I built agent dll for Target version NET 3.5 and for Target version
NET 4.0. I build it with "Release" and "Any CPU" configuration.
Exchange machine OS is Windows Server 2008 R2 Standard SP1 64 bit.
On the Exchange machine installed NET Framework 4 Extended and NET Framework 4 Client Profile.
Thanks in advance,
Vitaly
As root:
yum -y install libXext.i686 libXtst.i686
yum -y install libXext.x86_64 libXtst.x86_64
Similar Messages
-
Unable to use Set-TextMessagingAccount in exchange 2010
I unable to use Set-TextMessagingAccount in exchange 2010, tried both in sp2 and sp3 getting following error:
The operation couldn't be performed because object 'Aditya' couldn't be found on 'ex02.mydomain.com'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-TextMessagingAccount], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : C6F712B7,Microsoft.Exchange.Management.StoreTasks.SetTextMessagingAccount"
Athoght i am able to use "Get-TextMessagingAccount Aditya" successfully with following output
RunspaceId : e57177d4-6bb2-450d-acce-d56e81df6a9b
Identity : mydomain/Users/Aditya Mendiratta
CountryRegionId :
MobileOperatorId : -1
NotificationPhoneNumber :
NotificationPhoneNumberVerified : False
EasEnabled : False
EasPhoneNumber :
MailboxOwnerId :
mydomain/Users/Aditya Mendiratta
IsValid : True
Please suggest
Aditya MedirattaOK..this works only for currently logged in system account only. Say i logged in as administrator and use "Set-TextMessagingAccount" this would go any change i need to do on myself (administrator) by using "Set-TextMessagingAccount" but
its yet not able to modify TextMessagingAccount settings for any other users in organization from current administrator account even after adding the administrator to MyTextMessaging Role. Below is how i added administrator to MyTextMessaging Role . I get
the same error as stated in original query. Please suggest.
Adding Administrator account to MyTextMessaging ROLE:
[PS] C:\Windows\system32>New-ManagementRole -name "Text_Admins" -Parent "MyTextMessaging"
Name RoleType
Text_Admins MyTextMessaging
[PS] C:\Windows\system32>Get-ManagementRole "Text_Admins"
Name RoleType
Text_Admins MyTextMessaging
[PS] C:\Windows\system32>Get-ManagementRoleEntry "Text_Admins\*"
Name Role Parameters
Clear-TextMessagingAccount Text_Admins {Confirm, Debug, DomainController, ErrorAction, ErrorVariab...
Compare-TextMessagingVerifi... Text_Admins {Confirm, Debug, DomainController, ErrorAction, ErrorVariab...
Get-CalendarNotification Text_Admins {Credential, Debug, DomainController, ErrorAction, ErrorVar...
Get-Mailbox Text_Admins {Identity}
Get-TextMessagingAccount Text_Admins {Credential, Debug, DomainController, ErrorAction, ErrorVar...
New-InboxRule Text_Admins {Name, SendTextMessageNotificationTo}
Send-TextMessagingVerificat... Text_Admins {Confirm, Debug, DomainController, ErrorAction, ErrorVariab...
Set-CalendarNotification Text_Admins {CalendarUpdateNotification, CalendarUpdateSendDuringWorkHo...
Set-InboxRule Text_Admins {Identity, Mailbox, SendTextMessageNotificationTo}
Set-TextMessagingAccount Text_Admins {Confirm, CountryRegionId, Debug, DomainController, ErrorAc...
Set-UMMailbox Text_Admins {Identity, UMSMSNotificationOption}
[PS] C:\Windows\system32>New-RoleGroup "Text_admins_Rgrp" -Roles "Text_Admins" -Members administrator
Name DisplayName AssignedRoles RoleAssignments ManagedBy
Text_admins_Rgrp {Text_Admins} {Text_Admins-Text_ad... {mydomain.com/Users/Admi...
[PS] C:\Windows\system32>Get-RoleGroup "Text_admins_Rgrp" | FL
RunspaceId : 11e84709-8bcf-4777-8dd6-b018d1d2c5d3
ManagedBy : {mydomain.com/Users/Administrator, mydomain.com/Microsoft Exchange Security Groups/Organization Management}
RoleAssignments : {Text_Admins-Text_admins_Rgrp}
Roles : {Text_Admins}
DisplayName :
Members : {mydomain.com/Users/Administrator}
SamAccountName : Text_admins_Rgrp
Description :
RoleGroupType : Standard
LinkedGroup :
IsValid : True
ExchangeVersion : 0.10 (14.0.100.0)
Name : Text_admins_Rgrp
DistinguishedName : CN=Text_admins_Rgrp,OU=Microsoft Exchange Security Groups,DC=mydomain,DC=com
Identity : mydomain.com/Microsoft Exchange Security Groups/Text_admins_Rgrp
Guid : b50d3ed8-b8c2-4e9f-a3e9-b54350d3f645
ObjectCategory : mydomain.com/Configuration/Schema/Group
ObjectClass : {top, group}
WhenChanged : 2/7/2015 10:50:45 PM
WhenCreated : 2/7/2015 10:50:45 PM
WhenChangedUTC : 2/7/2015 5:20:45 PM
WhenCreatedUTC : 2/7/2015 5:20:45 PM
OrganizationId :
OriginatingServer : ex02.mydomain.com
Aditya Mediratta -
Comparing-the-differences-between-anti-spam-agents-from-exchange-2010-to-exchange-2013
http://social.technet.microsoft.com/wiki/contents/articles/23582.comparing-the-differences-between-antispam-agents-from-exchange-2010-to-exchange-2013.aspx
SathishHello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Unable to receive some emails in Exchange 2010
Hi,
Spent a few days on this and getting no where fast and out of ideas now.
We migrated a customer from SBS2003 running exchange 2003 to Server 2012 running HyperV with Exchange 2010 on a VM. So far the migration had gone through without many issues. We have 2 VM one AD/File server other Exchange 2010. with the old SBS2003 server
still online.
Basically after moving all the mailboxes from Exchange 2003 to Exchange 2010, some random users wont receive mail. Internal and sending is perfect. Port 25 was changed from the old SBS server and pointing to new EX2010 box.
After more testing pointing port 25 back to the old server solves the problem, all users receives emails instantly. So emails are routed via the old SBS box to the new Exchange.
On the new server both Send and receive connectors have been deleted and recreated. Checked the Default connector and Anonymous users has been ticked. Also this is ticked on the newly created receive connector.
I enabled SMTP logging and noticed the emails the wasn't getting delivered had the message below.
354 Start mail input; end with <CRLF>.<CRLF>,
,Remote
Found another person with something similar and tried the fix didn't work for me
http://social.technet.microsoft.com/Forums/exchange/en-US/da8a1fa4-0757-4ea5-8225-de15707d5a57/problems-receiving-mail-smtpreceive-is-set-to-verbose
Spoke with the ISP, all the email for our customer goes through a SPAM filtering service and they noticed their server would Telnet in and get "connection lost" after the Mail from: command, which matches the error on the SMTP log. Again it happens
to random users not receiving mail, but I did notice any new users that was created after the migration doesn't get any external emails when router via the ISP and Port 25 pointing to the new server.
So as a trial I bypassed the ISP by updating the MX record to point mail directly at new server, this fixed the problem! Everyone new and old users was receiving no problems. But speaking with the ISP they have 100+ customers on Exchange 2010 and never
experienced this issue. Only difference i can see we are using HyperV, could this be a networking issue?
PS our ISP uses a Watchguard device for Spam filtering.
Thanks!!!X.400 potentially could be the problem.. got through this article
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/x400-addresses-exchange-2010-part1.html
Where Technology Meets Talent -
Unable to recover deleted item in Exchange 2010
I'm on Exchange 2010 Sp1 and Outlook 2010. I'm trying to recover a deleted item from the dumpster and when I do I get the following error message.
"Outlook was unable to recover some or all of the items in this folder. Make sure you have the required permissions to recover items in this folder, and try again. If the problem persists, contact your administrator."
I am the administrator and I fairly sure I have been able to do this since migrating my mailbox to Exchange 2010 from Exchange 2003. I've rebooted my PC. Any ideas what is going on?Thanks for all the suggestions. That's correct. On my second non problematic PC I can login to my mailbox and recover deleted items without any problems. So same mailbox but different computer no problem. Actually I can recover a deleted item on my problematic
PC for other mailbox no problem too.
In regards to Mumin CICEK question my dumpster is set to 30 days. I tried multiple messages. Even messages that I had just deleted and emptied from deleted items. And again I can recover those same messages from another PC no problem.
In regards to the Windows profile may be corrupted I thought about that too. But what is interesting as using the same Windows profile if I login to a different mailbox I don't have any problems either.
I'll try fixmapi.exe as that seems like a good idea.
One last bit of additional information. My Outlook has hung and crashed on me several times of the past. It has happened when I've been connected to differernt mailboxes. From memory the debug mentioned something about a sharing violation. Maybe I should
turn off my anti virus to see if there is a corralation? -
Error 1603 when installing Rollup 4 for Exchange 2010 SP2
Hi There,
I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems. However I have hit a problem with my 4th server.
I am receiving the 'common' error 1603 in my Application log and I have already ran through many potential fixes to this problem on various posts on this and other forums, but to no avail.
I have tried the following without success:
Turning off UAC
Running from elevated CMD prompt
Running from elevated Powershell command
Removing and re-adding "Exchange Trusted Subsystem" from the Administrators group
Re-downloading the RU4 install package to the local disk on the server
Adding more RAM and CPU resources
I have watched the installation process and it seems to update of the native assembly files and comes to the "Starting Services" process, with which it appears to do fine as I have watched the Services starting within Server Manager while this has been running,
but then all of a sudden just begins "Rolling back actions".
The only difference with this server to the others is the fact that a colleague of mine had to recover this server within the last 6 months and ran the Setup /m:RecoverServer command
to do so, could this have anything to do with it?
I have installed Exchange 2010 Service Pack 2 on this server since the recovery though.
I am running out of ideas so any help would be greatly appreciated.skippy-85,
Any updates on this Issues?
In case if the issue stands
resolved, Please mark Solution for this Thread and close this.
In case if you still have
the issue with the RU4 installation do let us know!
Thanks
Exchangeexperts.in ~ ( Exchange | 2003/2007/2010/E15(2013)) ~Mark this if Helpful~ This Information is provided "AS IS" and confers no Rights!! -
Unable to install GC agent using GUI
hey guys.
I am unable to install oracle 10g release 2 agent on sun 9 sparc solaris machine using the GUI interphase. Now my question is, is there a way to install it without using the GUI interphase? if yes, let me know.
Thanks.Yes, you can by doing silent install but it important to know
what problem are you facing in GUI mode beacsue same thing could
reflect on silent install as well. -
Unable to install McAfee Agent
my user laptop is windows7 ,any antivirus is not install past 1 month. now installing McAfee Agent it showing error. "Error:1336.There was an error creating a temporary file that is needed to complete this installation. Floder:C:\Program data\McAfee\
common framework\.system error code:5 "Hi,
This shows that your server is unable to communicate with the server where the OMS is installed.
Check following:-
1. Is OMS up and running?. Run emctl status oms on the OMS server and paste the results
2. run telnet OMSHOSTNAME 4889 on the server where you are installing the agent and then post the results
I can help you to fix this.
Regards
Jomon -
Hi all,
I am not able to install the agent my server, I am follow below line to install but i m facing the below errror . In response file i updated the OMS hostname and port, path . I am using the port 4889
./runInstaller -silent -responseFile /<full path >.responsefile.rsp name
it showing port 4889 is not reachable.
Please help me in resolving this
Regards
VasuHi,
This shows that your server is unable to communicate with the server where the OMS is installed.
Check following:-
1. Is OMS up and running?. Run emctl status oms on the OMS server and paste the results
2. run telnet OMSHOSTNAME 4889 on the server where you are installing the agent and then post the results
I can help you to fix this.
Regards
Jomon -
Removing old exchange 2003 routing groups from Exchange 2010.
I have migrated over to Exchange 2010(server2008) from Exchange 2003(SBS2003). I've also already run the uninstall for exchange 2003 on the old SBS 2003 server. The old server itself is still running but exchange has been removed and once I get this fixed
I plan to fully remove the old SBS server.
I now get event ID 5020 and 5006 throughout the day on the new server. From what I've read, this happens because the old routing group connectors still exist.
If I run Get-ExchangeServer I get
Name Site ServerRole Edition AdminDisplayVersion
SERVER None
Standard Version 6.5 (Bui...
SERVER2008 hr.local/Configur... Mailbox,... Standard Version 14.0 (Bu...
Am I correct in assuming that the way to fix this now is to go into ADSI edit and delete records under CN=First Administrative Groups? As in delete CN=Routing Groups and CN=Servers and everything under both of those? I'd try this myself but I'm not aware
of any way to restore those records easily if I'm wrong.
Event ID 5006
Cannot find route to Mailbox Server CN=SERVER,CN=Servers,CN=first administrative group,CN=Administrative Groups,CN=HR,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hr,DC=local for store CN=Public Folder Store (SERVER),CN=First Storage Group,CN=InformationStore,CN=SERVER,CN=Servers,CN=first
administrative group,CN=Administrative Groups,CN=HR,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hr,DC=local in routing tables with timestamp 27/09/2014 1:57:43 PM. Recipients will not be routed to this store.
Event ID 5020The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003 server.hr.local in Routing Group CN=first routing group,CN=Routing Groups,CN=first administrative group,CN=Administrative
Groups,CN=HR,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hr,DC=local in routing tables with the timestamp 27/09/2014 1:57:43 PM.Get-RoutingGroupConnector shows nothing. As for the servers group. It has the old server under it as shown in the image I posted above. That's actually what stops me from just deleting it because other guides have said not to delete it if an old server
is listed.
Is the SBS2003 server listed because I haven't ran DCPROMO to remove it from the network yet? I am planning to do this but was waiting till I cleaned up all the errors before transferring the 5 FMSO roles and running DCPROMO on the old server.
DCPROMO isn't related to this, no.
So you removed Exchange already? How? With setup? It should have removed the Exchange Server object then.
It is supported to remove Exchange 2003 manually if required with adsiedit:
http://support2.microsoft.com/kb/833396
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Hi Guyz,
I have this setup in my exchange environment.
1 DAG with 2 members
- One member is located in Head Office and the other member is located in DR site. All of the mailbox databases are located only in HO (Plan to add additional second member in HO soon). Now what is the proper way to install windows patches on the
member in HO? I don't want to move the databases to DR site as much as possible.
Appreciate your feedback and Many thanks in advance guyz..
More power to all!
Regards,Hi,
To update the DAG members with new patches, the update process should be managed to prevent all of the DAG members from being offline at the same time.
To do this, I recommend you move the active mailbox databases off a particular server so that it can be patched, and if necessary rebooted, without causing any downtime for mailbox users on that database.
For detailed steps, here is an article for your reference.
How to Install Updates on Exchange Server 2010 Database Availability Groups
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
Note: Microsoft is providing this information as a convenience to you. The site is not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Unable to install policy agent 2.2 for Webserver 6.1 on Windows 2003
Hi everybody,
I've installed Java Enterprise Server (last version) on Windows 2003 with these components:
- Directory Server
- Access Manager
- Webserver
- Administration Server
Everything works good, I can access all those components.
Now I want to use Policy Agent 2.2. So I've downloaded it and I've tried to install...
But during the installation process, an error message appear when I select the Web Server instance directory to protect.
It says: "invalid web server instance - on windows, Access Manager Policy Agent only supports Web Server 6.0 and 6.1.....".
The problem is that I work with WebServer 6.1....
I really don't know what to do now... This message prevent me to go further.
What's the problem? How can I avoid this?
Thanks for your help!
AdrienOkay, here's what it says:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, ot the updgrade pathc may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct update patch".
I don't even know what program I'm supposed to have.
Ideas, anyone? -
Unable to install monitor agent
Hi,
I'm trying to install the 2012sp1 monitor agent on a running 2012sp1
server, linux based. But i do get the error:
IndexError Exception in Tk callback
Function: <bound method FrontendRow.action of <frontend.FrontendRow
instance at 0xf472ba2c>> (type: <type 'instancemethod'>)
Args: (<Tkinter.Event instance at 0xf473380c>,)
Event type: ButtonRelease (type num: 5)
Traceback (innermost last):
File
"/tmp/gw12.0.1-103731_full_linux_multi/gwinst/python/lib/python2.3/site-packages/Pmw/Pmw_1_2/lib/PmwBase.py",
line 1747, in __call__
return apply(self.func, args)
File
"/home/build/work/asc/linux_image/groupwise/gwinst/frontend.py", line
298, in action
None
File
"/home/build/work/asc/linux_image/groupwise/gwinst/frontend.py", line
627, in action
None
File
"/home/build/work/asc/linux_image/groupwise/gwinst/frontend.py", line
157, in __init__
None
IndexError: list index out of range
How to fix this?
AlexOn Thu, 04 Jul 2013 06:26:02 GMT, laurabuckley
<[email protected]> wrote:
Hi Laura,
I was using the software directory which is all 8.3 notation. But that
one seems to kick off the original long directory installation. And
indeed, if i change the org install install dir to an 8.3 notation,
the agent can be installed as requested.
Thanks.
>
> Hi Alex,
>
> I could be wrong, but, this looks like the "usual" python errors that
> one sees from time to time with running the GroupWise install script.
>
> Change your directory names to match 8.3 convention and rerun the
> install.
>
> Please post back your results.
>
> Cheers, -
Unable to update DL membership in Exchange 2010
Hi,
We have multi forest enviroment , User mailbox and DL are created in one Forest A and user logs into Desktop into Forest B and configure the outlook using forest A username and password.
User is the owner of few DL's and able to update the group membership using the ECP , but not through the Outlook.
Same is working for users who logs into Forest A.
Does It is not working due to user logs into different forest ? .Howerver Test-Outlook connection and all other things are working fine.
Please advise on this ...
Regards
K Gopi
Regards Gopi KHi Gopi,
since it Works from ECP (Addressbook is in online mode) and not Outlook(cached mode),means GAL is not updated yet.
How long has it been since DL list was updated?Normally Exchange updates it during the night,then at Next logon and start of Outlook it should download latest Version.
Please run the following command in Exchange PowerShell (one for each line):
Get-GlobalAddressList | update-GlobalAddressList
Get-AddressList | update-AddressList
Get-OfflineAddressBook | Update-OfflineAddressBook
the Close users Outlook and restart it.do a manual address book download again.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work -
Message looping between Exchange 2003 & Exchange 2010 after domain type changed to internal relay
Hi
We have a coexistence environment where we are currently migrating from Exchange 2003 to 2010 and have 80% of the users already on the Exchange 2010 platform. This is all within the same AD forest, let's call it FOREST1.AD.
The problem I'm seeking help about is a message routing problem we had this morning where messages bound for the Exchange 2003 users started looping between Exchange 2003 and Exchange 2010. The problem started as a result of changing the accepted domain
type to 'internal relay domain' for the purposes of establishing SMTP namespace sharing with an external Exchange environment (different forest, let's call it FOREST2.AD). The expectation was that after changing the domain type from authoritative to 'internal
relay domain', Exchange 2010 would route messages for unknown recipients to the external environment and that would be the only effect of the change. The message routing to the external environment worked completely OK. However, later we noticed that Exchange
2003 stopped delivering messages to its local users and started routing them to Exchange 2010 which would route the messages back to Exchange 2003 as that's where the recipients existed, only to have Exchange 2003 send them back to Exchange 2010 again.
The Send connector to route the messages, for the shared namespace, to the external environment used the Exchange 2010 server as the source server. It makes sense and is expected that Exchange 2003 would send messages for any unknown recipients to Exchange
2010 for onward delivery via the Send connector. But it is not expected for Exchange 2003 to not deliver messages to its own users using the store driver and instead routing them on to Exchange 2010.
We fixed the problem by reversing the change and not only changed the domain type back to authoritative but also removed the Send connector for the specified shared namespace. However, we do need to understand why this problem happened and how to stop it
from happening.
We did test the shared SMTP namespace configuration using a test domain before applying the change to the domain that is used for production email traffic. Test users on Exchange 2003 with email addresses on the test domain did not experience this looping
problem. This has been tested again after the production domain experienced the problem and there is no looping for the test domain. The only difference I noticed between the configuration for the test domain and the production domain is that while both domains
existed as accepted domains of type 'internal relay domain' in Exchange 2010, there was a difference in configuration in Exchange 2003 where the test domain was not present on the recipient policy at all and the production domain was present there.
This also makes me wonder if Exchange 2003 and Exchange 2010 in the same organization keep a separate configuration to determine which domain they are authoritative for. When you install Exchange 2010, it does add all the domains on the recipient policies
to the accepted domains configuration but any new domains you add in accepted domains in Exchange 2010 are not added to the legacy recipient policy object.
Can someone please help clarify these grey areas and explain why the message looping was created and how to avoid it. I'm happy to provide any further information.
Thanks
Nauman.Hello,
Why do you want to use the 'internal relay domain' authentication?
Thanks,
Simon Wu
TechNet Community Support
Maybe you are looking for
-
Wireless printer sharing with windows 7 and vista operating systems.
hello can anyone help me? i have a new HP pc with windows 7 OS, and have an epson PX710W 3in1 printer. i want to connect a laptop with vista OS to share the printer (wireless set up). the pc will print documents ok via wireless link, but when i power
-
PM Notification Attachments via "Create Attachment" vs "Creat Ext Doc (URL)
Uwe - Did you create the PM notification attachment using Create Attachment or Create External Document (URL) ??? Mine were created as attachments, not as external documents - that may be why your code isn't working ... I'm going to try to do an
-
Hi, I want to find the estimated time remaining for the SQL that is running, when I try to query from v$sesion_longops, it is not returning anything even though i see the session running in v$session. Why am not getting any output from v$session_long
-
Where to find the updated server for 10.3?
I searched yesterday the Apple's download site with the updated server version for 10.3, but could not find it. Anyone have the link to this?
-
ThinkPad L530 DVD-RW Drive Ejecting Randomly & Crashing
The dvd drive will eject randomly and when that happens it crashes my laptop. The screen will go black and you have to hold down the power button to restart the comp. This happens whether or not the dvd drive is is enabled or not. I ran a virus scan