Unable to listen to music on xa-0611

Hi,have an O2 XA-0611 headset which Ican use for calls but can't listen to music.I can use the headset to play or pause forward or rewind but no sound comes through.
Is there something Ineed to change in settings?.Headset is supposed to be compatible with iphone.Thanks.

Well ****. I guess it's my turn to experience this. Yep. 120GB iPod Classic. All of a sudden, "no music." But it's all there, according to the settings. Please, oh please, Apple. We need help. I can't deal with losing all this precious music. I have a lot of it backed up in various places, but it would be impossible to get it ALL back, and it would be an incredible long and challenging process to retrieve what is retrievable.
I'm too busy for this. Please give us an easy fix, please!

Similar Messages

Unable to listen to music while iPod is connected to computer

Whenever I connect the iPod(5th Gen) to my computer it shows Do Not Disconnect message and am unable to listen to music. Also, if music is playing previously, it stops automatically. Can anyone help? Just been two days since I bought my iPod

Try this for your Do Not Disconnect issue:
Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if you have your iPod set to automatically sync with iTunes and also have a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
" http://docs.info.apple.com/article.html?artnum=61135
Just another point to note, your iPod needs to be in manual mode to listen to it while connected to your PC. In automatic mode you will see the iPod library greyed out and inaccessible.

Screen says "Unable to listen to music; low battery" & won't charge?

My niece just called me with a problem I could not find a solution to doing a search.
She said she was listening to a song when her Nano stopped playing. When she looked at the screen, it said "You Can't play music, your battery is dead". It appeared for about a minute, then disappeared.
She plugged it in via the A/C wall adaptor, but the charging icon is not showing on the screen.
I told her to attempt a restart, but nothing happened. I asked if she attempted to charge it using the computer. That had also been tried before contacting me, and no icons appeared then either. Initially, my thinking was that it would need to be connected to the charger for a while before it had enough energy to show anything, but she said that it's been connected to the wall charger for over 3 hours now and that's why she decided to call me. Unfortunatley, we live a few thousand miles apart, so I can't run over and see it. And yes - I did have her check the hold button & that's not on either (see; I read these boards & do searches when I have questions! LOL)
Any ideas are greatly appreciated, as I'm at a complete loss. I have never heard of an iPod, Nano or regular, displaying such an interested message (I asked over 3 different times, and each time she repeated the same thing - unable/can't listen to music, low battery - then died).
Hopefully, someone can answer so I can regain my iPod Goddess status in her eyes =) I was floored when I did a discussion search and couldn't find the answer!
THX!
Windows XP First Time Mommy to 4gen 60gb

Hi Menhem,
It is unfortunate that the automatic calibration didn't complete. I would recommend going ahead and trying the Manual Calibration steps at the end of the document Testing and Calibrating the Battery (Windows 7), then go back to using the notebook as you normally would and see if the behaviour of the battery and charging system changes at all, you could also run the battery test again to see if you get a different result. If it improves great, but if there are still problems, try the automatic calibration one more time to see if it will complete.
Another thing to do is to make sure you are up to date with your BIOS, the latest BIOS for your model is F.52, which you can find at the link below, but it is relatively old at this point, so I would thing that you probably already have it on your PC. In general I would recommend running the HP Support Assistant application, and letting it check your PC and keep it up to date with all the necessary drivers.
How long have you had the notebook? Batteries do degrade over time with normal usage, and if you have had the notebook for awhile, and have put the battery through many charging cycles, it may just be time for a new battery. Check out Purchasing a Replacement Battery for instructions on finding a replacement battery. Some other documents to review are Improving Battery Performance (Windows 8, 7, Vista) and Understanding Lithium-Ion and Smart Battery Technology, both of which may have some good information to help you with your issue.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Unable to listen to music (sometimes)

I have a laptop with a wlan connection and all my mp3 music on a network drive. i have imported some of my cd's from my network drive to my itunes. When I take my laptop on the go, I can't access those songs. And when I get back and resync my Ipod i get the message stating that it could not find those songs and I have to go back every single time and show it were it is. It's not on all the songs, just a couple. I have other songs on Itunes from the same drive and don't have that problem

Try this for your Do Not Disconnect issue:
Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if you have your iPod set to automatically sync with iTunes and also have a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
" http://docs.info.apple.com/article.html?artnum=61135
Just another point to note, your iPod needs to be in manual mode to listen to it while connected to your PC. In automatic mode you will see the iPod library greyed out and inaccessible.

Unable to listen to music on 4s through aux input after ios7 update

I can no longer listen to my phone using my aux input
In my car. It worked yeasterday before the upgrade
But doesn't work today. Please help

I have this same issue but with iPhone 4. Would not play via USB or Bluetooth. I own 2013 Toyota Corolla. When I plug via USB my car audio display lets me select folders and music through browse but when I select a song I get an error on the car audio display that says "read manual or contact dealership for information on how to connect". This did not happen prior to ios 7 update on my iPhone 4.

Unable to listen to music because my ipod says there is none.

everytime i unplug my ipod from my computer after letting it put all my music and stuff back on it, it always says in my settings that there are 0 songs and videos why is that so? i am sick of seeing this every **** time it really ****** me off

Providing they play OK in iTunes on the computer
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
Note the delete is only for later iOS versions.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Ipod on Iphone 4: unable to listen to music on speakers

While playing my music, IPOD, on my iphone 4, sound is not coming through speakers on phone. The volume control is not even shown, unless airport express is selected.
If I am in my car, and the blue tooth, hands free device is on, the music will play though the hands-free device.
I have upgraded to version 4.3, but a friend who also upgraded is not having the same issue.
Any assistance is appreciated.

Hi,
Try turning off Bluetooth on the iPhone.
Tap Settings / General / Bluetooth
You may need to restart the iPhone for changes to take effect.
Carolyn

My ringer does not work on my phone (not sure what happened, didn't smash it, nor did it fall to the ground), and I have been on silent/vibrate mode for a few months now. Unfortunately I am unable to listen to music without headphones, or get on speaker.

I can hear sounds when I plug in to headphones or on bluetooth (streaming audio from my car).
Can anyone help?
I have the iphone 4s.
Thank you!

Hey Chris,
Unfortunately the ringer does not work - which causes the speaker to not work when it's switched on to ring mode, unless I'm on bluetooth. It has recently stopped working and I've had this phone for 2 years.

I recently used Bluetooth speaker with my iPhone 4S Now I am unable to listen to music through headphones Iphone speakers, even when device is no longer recognised by phone.

Please advise

Hey Jennymagee,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s. The following resource may provide a solution:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
1. Verify that the volume is set to a level you would normally be able to hear.
2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
6. If the iPhone is paired with a Bluetooth headset or car kit:
- Try turning off Bluetooth.
- If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
7. Restart the iPhone.
8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
If the issue persists, please follow the last step by contacting Apple Support for support and service options.
Thanks,
Matt M.

Unable to play purchased music after successfully authorize computer

Cannot play purchased music:
Prompted for id and password (Authorize Computer).
Next prompt notifies me that the "Machine Authorization was Successful".
Does nothing.
Double click on song again - repeat Authorize Computer.

Also having exactly the same problem.
I've followed the same steps with the same results.
Even check for the number of authorized computer : only one.
Tried to remove authorization and give it again : no change.
Still unable to listen to the tracks bought on the iTunes Store. It was possible the day I bought them and they have been transferred to the iPod through iTunes.
I have listened to those tracks on my iPod for a few days.
But when reconnecting today (first time since the date of purchase), I cannot listen to those purchased tracks anymore and they seem to have been removed from my iPod by iTunes !!!
This was my first purchase on iTunes Store and it's a very bad experience. Unable to listen to music I've bought !
Could someone give us all an issue, please ?!
Windows Desktop Windows XP Pro
Windows Desktop Windows XP Pro

Listening to music with my earphone ...

Hi,
If my wireless bluetooth earphone (Plantronics 510) is connected to my iPhone, when not speaking on the phone, why am I unable to listen to music from the iPod application with my earphone ?
Regards.

Hi Rudegard,
I should have thought of Wikepedia. The A2DP protocol seems to be required to streaming sound and video from the device to the headset. The AVRCP protocol seems to be used to manage the shuffling of the music and video (play, pause, stop, next play, etc ...).
I am looking for the bests wireless headset I can use with my iPhone, iPad and iPod. I has to allow me to listen to music or talk over the phone. Since some headset are not described as compatible with Apple products, I wanted to know what to look for.
Regards.

I cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

i cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

Did you already reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
If this does not help, try to set it up as new device, explained here:
How to back up your data and set up as a new device

My Itune program crashed while listening to music last monday and unable to download program back onto my desktop.

My Itune program crashed while listening to music last monday and unable to download program back onto my desktop.

Great thanks for sharing
Now what is your your question?
what happens when you try to download it?

I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

I have recently restored my phone to unlock it. I have installed the latest version of IOS. Since then, I have not been able to play the music I have purchased. The scrolls or flips through the songs and I am unable to listen to them. Can anyone help?

I have recently restored my phone to unlock it. I have installed the latest version of IOS. Since then, I have not been able to play the music I have purchased. The scrolls or flips through the songs and I am unable to listen to them. Can anyone help?

iTunes is quite friendly, and very powerful.... You probably just need to set up automatic syncing in iTunes.
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select the iPod there.
To the right, the iPod's Summary screen is shown. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. This setting enables automatic syncing for music. If your iTunes music library is small enough to fit on the iPod's storage, you can choose to sync Entire music library. Otherwise, you can choose to sync Select playlists, artists, albums, and genres. From the lists below, select (checkmark) what you want to sync to the iPod.
Here's one convenient way to set this up. In your iTunes library, create one or more playlists. Add the ALL the songs you want on the iPod to those playlists. OR, you can use existing playlists. Back on the iPod's Music screen, select those playlists under Playlists. (You can select other items on those lists, if desired.)
When you click Apply, the songs in your selection sync to the iPod. Going forward, to update your iPod (add/remove songs), just update those playlists in your iTunes library. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates the iPod with the same changes.
NOTE: On the bar of buttons that starts with Summary, click on the other buttons (such as Movies, Podcasts, Audiobooks, etc.) to set up syncing for those iTunes media categories.

Unable to listen to music on xa-0611

Similar Messages

Maybe you are looking for