Unable to lunch the XCM Tool

Hi Experts,
I am getting th following error when i am trying to lauch the xcm tool using the following url. Please let what could be the reason like.
URL:
http://localhost:50000/b2b/admin/xcm/init.do
Error:
404 Not Fund Error.
The requested resource does not exist.
Do i need to deploy some thing to lunch the xcm or Need to configure some thing to launch this tool?
I have deployed following .SCA files. Any SCA file is missing to launch the XCM tool.
BPCRMAPP03_0-10007194.SCA
BPCRMFND03_0-10007196.SCA
CRMAPP03_0-10007193.SCA
CRMFND03_0-10007195.SCA
Please specify the prerequistes for lunching the XCM tools.
Regards
Vijay
Edited by: Guru ch on Jan 26, 2011 3:26 AM

Hi
Thanks for the valid reply,
To explain our scenario, we are using the CRM as back end system. All all the orders are submitted to CRM once the orders are submitted to CRM it will be pussed in to ECC for Billing. Also, we are using the ECC for Pricing , Billing and Catlog will be maintained in oth ECC & CRM, But the Catlog chanes will be happen only in ECC and the changes will be moved to CRM when changes happen in ECC.
As per your reply , In my case as i am using CRM, I need to deploy the following files in SAP WAS 7.0(java stack)
1) SAP-SHRWEB.sca
2) SAP-SHRAPP.sca
3) SAP-CRMWEB.sca
4) SAP-CRMAPP.sca
5) SAP-CRMDIC.sca
6) sap.com~STRUTS.sca
7) TEALEAF.sca
8) SAP-IPCMSA.sca
Any idea what is the use of following .SCA file to be used for?
BPCRMAPP03_0-10007194.SCA
BPCRMFND03_0-10007196.SCA
CRMAPP03_0-10007193.SCA
CRMFND03_0-10007195.SCA
Provide the steps which need to follow for setting up the E-commerce application. Even for E-commerce customization .
Regards
vijay

Similar Messages

Unable to lunch the application

Hi!
First of all sry for my english but i hope you can understand me=\
I am a bit new to java, and i've finished my first app. Its not fully done but i wanna use it already so i cleaned and built the app, and when i want to start the jar file i got an error:
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Tha strange thing for me i tried to look for this message in google and every1 who got the same problem made aplet or used web start, and my app is just a simpl java application or it should be.
I dont know if i just so newbie and i am trying to start the wrong file or dont know. By the way i am using netbeans IDE!
Thanks for your help!
Edited by: 932161 on 2012.05.05. 3:29

You will have to correctly define your JNLP file in case you are trying to launch your application as Java Web Start application. However in case you simply want to launch your application which is packaged in a JAR file then you can simply use the command:
*java -jar file_name.jar*
This will work provided your JAR contains the manifest file with Main-Class: attribute which should be the fully qualified class name of your start-up class containing the main(String [] a) method. On Windows, this type of JAR is self executable through javaw if JRE is present.

Unable To install SOA 11g tool set

Hii All ,
Can anyone please help me to install oracle SOA 11g toolset ?. I have tried with the installation document given in oracle site but while configuring SOA
from JDvloper(11) I unable to view the option tool-configureSOA .
Thanks and regards,
Deekay.

this below link will give complete details about 11g installation :
http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf

Where is the wrap tool located in the new release of Muse (Muse CC 2014)

I am unable to locate the wrap tool for the new release of Muse CC 2014. Could someone point me in the right direction?

If you can’t see it in the toolbar, you have to activate it in the windows-menu.

CS4 and the patch tool

After using the patch tool in CS4 I am unable to use the clone tool without closing photoshop and restarting it. Any ideas why this is happening?

Have you deselected the Selection?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance etc.)?

Using the clone tool on a picture I have pasted in another background?

I have photoshop elements 9, and took a photo that I wanted to change the background on. I erased all the picture except for my husband and I, then used the lasso tool to outline our photo and I copied it, and pasted it on another picture with a better backround. Now I am unable to use the clone tool on my husband and I, but can on the background. Maybe there is a better way to extract a photo and post it to a new background. But everytime I try to see how to do it on google, I see all these other tools that people use that I don't have. I have only elements 9, so am limited. Any suggestions?

I'm not at all sure I understand how elements 9 is limited in terms of the clone stamp compared to whatever you're googling, but I think your problem is most likely that you are either not targeting a portion of a layer with something in it (trying to clone from the empty area of the layer surrounding the pasted in image of you and your husband, for example) or trying to clone from a layer that isn't active (trying to clone from the background layer when the pasted in layer is the active layer).
You might want to turn on the Sample all Layers checkbox and see if that helps any.

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
Might try this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Unable to Repository using the Client tools SAP BI 4.0

We have Installed business objects client tools version SAP BI 4.O on our machines and enabled the 6400 to 6420 ports
but we are unable connect to the Repository .All the input/output servers are ruuning
Error message :File Repository server input down.
Could any suggest what need to be done inoder to work with the client tools

Hi,
you need to narrow down the Ports for the IFRS and OFRS. The Services choose their ports dynamically. They dont need to be in between 6400 and 6420.
Check the "Working with Firewalls" Chapter from the BI4 Admin Guide.
Regards
-Seb.

Unable to find the Visual Admin Tool Nw 7.3 Ehp1

Hi Experts,
We have Installed the Portal System (NW 7.3 Ehp 1) in that we are unable to find the visual admin Tool in the path drive:\usr\sap\\J00\j2ee. Can you please suggest me how to rectify the error..
Thanks in Advance...
Regards,
Krishna.M

Dear Krishna,
Visual admin is no longer supported in NW 7.3. Please find the below link to see all the changes in NW 7.3:
Nice Blog For All the changes in NW 7.3
Hope its helpful.
Regards,
Deeraj Shetty

Windows Azure Tools: Failed to initialize Windows Azure storage emulator. Unable to start the storage emulator.

Hi,
I created a cloud service using Visual Studio 2013. When I tried to run the service, it fails with
Windows Azure Tools: Failed to initialize Windows Azure storage emulator. Unable to start the storage emulator.
Is there a way to debug this error? At a bare minimum, it would be great to get an error message on why it could not start.
Thanks

I ran Windows Azure Storage Emulator -v3.1 to launch the command line tool. I wanted to see if I could get some debug information, but that failed with the following exception.
C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator>WAStorageEmulator.exe start
Windows Azure Storage Emulator 3.1.0.0 command line tool
Unhandled Exception: System.TimeoutException: Unable to open wait handle.
   at Microsoft.WindowsAzure.Storage.Emulator.Controller.EmulatorProcessController.InternalWaitForStorageEmulator(Int32 timeoutInMilliseconds)
   at Microsoft.WindowsAzure.Storage.Emulator.Controller.EmulatorProcessController.EnsureRunning(Int32 timeoutInMilliseconds)
   at Microsoft.WindowsAzure.Storage.Emulator.StartCommand.RunCommand()
   at Microsoft.WindowsAzure.Storage.Emulator.Program.Main(String[] args)

Unable to Open RPD in online mode by using the Admin tool in OBIEE 11g.

Hi All,
I Installed OBIEE 11g (11.1.1.5) in Linux Box.
When I am trying to Open the RPD in online mode by using the Admin tool, I am facing the below error.
Logon failed due to:[nqsError:43113] Message returned from obis
[nQSError:13037] Cannot connect to BI Security Service,please make sure this is running properly (with SSL ot not) in EM.
[nQSError:37001] Couldnot connect to the Oracle BI Server Instance.
All my services are up and the status are Alive,My biserver is in Running Mode and I am able to open the Answers page too.
I am able to open the same RPD in Offline mode but not in Online mode.
I Created a System DSN in ODBC Data Source Administrator for opening the RPD by using the OracleBIServer1 driver,still the issue doesnt resolve.
Any help is highly appreciated.
Thanks,
Praveen.
Edited by: 885630 on Dec 21, 2011 3:33 AM

Hi All,
This question is answered.
The Resolution is
While Installing the RCU i created two instances so the RPD is not able to take the correct instance.After deleting the other instance now i am able to open the RPD in online mode as it is pointing to only one instance.
Thanks,
Praveen.

Unable to Open the OBIEE Admin Tool (RPD) 10.1.3.4.2 after Installation

Hi,
I have installed obiee 10g (10.1.3.4.2) in windows server 2008. After installing, when I tried to open the Admintool it is giving me the below error.
The application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxtrace.exe tool for more details
Restarting the machine also does not work. Presentation Services were not started. When tried to start the services, it is throwing error like asking to check the system log. Is this stopping Admin tool to open..?
What could be the wrong with presentation services. I havent changed anything. I have reinstalled and restarted the machine, still same problem
Please help...
Thanks in advance

HI,
I see there are totally 3 programs listed with the naming convention --
"'MS VC++ 2005 Redistributable(x64)"
"'MS VC++ 2008 Redistributable(x64) x86 9.0.30729.4148"
"'MS VC++ 2008 Redistributable(x86) x86 9.0.30729.4148"
I am not sure which one to uninstall and reinstall out of these listed programs.
Is this causing the issue to display error while opening the Admin tool ?
Please help with your inputs
Thanks

HELP!! Unable to select objects with the selection tool

Not sure if I accidently hit a key that I wasn't supposed to, but the selection tool stopped working the way it should. When I put the cursor on top of an object and click the mouse button, nothing happens. Also ctrl A doesn't work. Any suggestions? I've shut down and restarted and that didn't work.

grooveslapp,
To keep previously selected objects selected, ShiftClick the following ones.
If Ctrl+A does not select anything, and if no selection appears in the Info palette (select Objects in the flyout), something else is the matter, and it may be time to Move the folder

Unable to lunch the XCM Tool

Similar Messages

Maybe you are looking for