Unable to maintain forecast

Hi All,
While running the Fcst interactively through Transaction SDP94 and clicking on the Univariate Forecast icon there is an error coming
" Incorrect shift entry found and deleted" this error is coming when in the Horizon tab the date in Forecast Horizon (From date) is put. System is not doing any calculation of the Fcst.
Can anyone assist
Thanks,
Harsh

Harsh,
Please check your univariate profile. Is it in active status?..I mean is it in saved condition? (I hope you were trying in display mode). If not saved then you need to save your Fc profile.
Thanks,
Satyajit

Similar Messages

I am unable to maintain global settings in spend analytics UI,

Dear spend Analytics experts,
I am unable to maintain global settings in spend analytics UI,
Also I understood from the spend analytics material that the standard templates should be available as part of standard templates.
To give more info I follow data source methods from ECC to BI load data, the data is in BI now.. and also have maintained the table settings in BI (OPM_SOURCES)
In spend analytics UI I could see the data source quires as measures , dimensions but in data managements (global settings and template administration) unable to figure out what is the issues.
Pls let me know how do I get standard template in Spend analytics UI.?
Also let me know if u need more info to understand my issues, I really appreciate your help u2026
Rgds,
Raj

Thanks Rohit for your reply, sure i will check all the listed web services as you mentioned..
coming to datasurces config , I follow the process which is there in material to generate data sources.
FYI I have scheduled the data loads to BI until PSA.. its successfully loaded but still have to validate the data, I assume that we
have to load data until PSA, then use perform data load process form SPM UI.? Correct me if I am wrong?
.. Here is the list of datasource I have generated and replicated to BI
Z_SADSERPBUDGETS
Z_SADSERPBUYER
Z_SADSERPBUYINGORG
Z_SADSERPCATEGORY
Z_SADSERPCONTRACT
Z_SADSERPCOSTCENTER
Z_SADSERPGLACCOUNT
Z_SADSERPIVBSAK
Z_SADSERPIVBSIK
Z_SADSERPMGMTORG
Z_SADSERPPO
Z_SADSERPPRODUCT
Z_SADSERPSAGREEMENT
Z_SADSERPSITE
Z_SADSERPSLINE
Z_SADSERPSTDPRICE
Z_SADSERPSUPPLIER
Z_SADSERPTCURF
Z_SADSERPTCURR
Z_SADSERPTCURV
Z_SADSERPUOM
Regards,
Raj

Idea Tab S2109 unable to maintain a stable wireless network connection

Can somebody tell why?
I have purchased 2 of S2109 .
1 is ok, everything all right.
the 2rd one , unable to maintain a stable network connection in wireless mode. 1 minutes at least disconnect 20 times.
AND, expecially when you open a website, immediate show that connection lost or disconnect.
Can tell me why, and how to resolve? Before i return back to Retail shop.
I hoped can settle from myside.
Moderator note; e-mail address removed to stop the spambots getting it

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Based from what i read in your post, you should try performing factory reset for the system
Then again reconfigure the Wifi to check . Please refer below link for factory reset
Factory Reset - IdeaTab S2109A (S2109)
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Unable to transfer Forecast to ECC

Hi Experts,
We are unable to transfer foreact from APO Dp to ECC.
we can see the forecast data in Planning Book and transffered to ECC through Batch Job. When we check in spool. It is showing message "Transffered data to R/3. But we can't see the forecast in MD63.
Thanks & Regards,
Manasa

1) Check if Product location exists in ECC and APO.
A) Both are same
2) Check transaction MD73 instead of MD63. If forecasts are already consumed, you will not see them in MD63.
A) When i check for Plant X, I can able to see forecast data in MD63.But for Plant Y in MD63, it shows message "No requirements were found which correspond to the selection criteria".
As you asked me to check data in MD73, it shows message "No requirements were found which correspond to the selection criteria".
3)In the activity definition in APO if you do not specify a Requirements Type, check what Strategy Group is assigned to the Material master in ECC. Then go to customizing and identify the Planning Strategy. Check if the Planning Strategy has a value assigned for the Requirements Type for Independent Requirements.
A) Y plant is just a replica of Plant X. Both are having same parameters in Material master (ECC)and in Product master (APO).

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

Ags_work_incident_create_app - Unable to maintain system and client

Hi,
When creating a support message from the Incident work center, the fields system and client are greyed out and thus not maintainable.
I have no problems creating support messages using the SAPWEBGUI or through transaction NOTIFCREATE, it is only when using the work center. I do not have any other issues in the workcenter, I can display and change support messages.
I have check the security settings and run a security trace which did not come up with anything.
Any advice as to why these fields are greyed out would be greatly appreciated.
Thomas

Authorization problem, issue solved.

Unable to maintain price in Quotation - ME47

Hi Gurus,
I am trying to maintain the price in quotation - ME47.
However, the price field is grayed out as such..
Could someone help me on this regarding the settings and the process of this.
Best Regards
Sudhi

Hi,
Please check the field selection for ME47 in the path: OLME - RFQ/Quotation - Define Screen Layout at Document Level. Here, go to details of the field selection key ME47 and go to "Quantity and Price". Check whether the price and price unit are maintained correctly as shown below.
Regards,
AKPT

Unable to maintain internet connection using wireless router

I posted a bug report with Apple, 7229097. Not sure if anyone has been able to fix this. I tried the suggestions on the board (create location, reboot router, clean install, normal install, delete config etc.) I have narrowed the issue down to my router, which works fine under 10.5.8.
Summary:
I have trouble maintaining an internet connection using my Dell TrueMobile 1184 Wireless Broadband Router, model wx-6215D. If I connect directly to my cable modem, I have no internet issues. So, it seems the issue is using the Router, both wireless or using RJ45 cable.
Steps to reproduce:
Connect to my wireless router using Airport or RJ45. Browse to a page using Safari or Firefox. First page usually comes up, but is incomplete. Start using refresh or click on more pages, after 1 - 5 refreshes, clicking on links, you get a notice that you are no longer connected to the internet. If you open terminal and execute "dscacheutil -flushcache" you can get your internet back, but will degrade to no internet after 1 - 5 page refreshes.
Expected result:
Internet browsing should be fine
Actual result:
Internet degrades until browser reports no internet connection.
Regression:
Go back to 10.5.8 system and no problem exists. Only happens when you upgrade to 10.6 and 10.6.1.
Notes:
I have tried doing the recommended installation, and erasing the hard drive and installing - in both cases I have the same result. Router works fine for PC and 10.5.8. I have since installed 10.6.1 to a USB drive to do any further testing and would appreciate a patch or a timeline for a patch before I move my system to 10.6.1

I tried adding in the OpenDNS ip 208.67.222.222, 208.67.220.220
It appears that the router is hijacking DNS calls.
Funny thing though, DNS is resoving through the router, .2.1
nslookup apple.com
;; reply from unexpected source: 192.168.2.1#53, expected 208.67.222.222#53
;; reply from unexpected source: 192.168.2.1#53, expected 208.67.220.220#53
Server: 192.168.2.1
Address: 192.168.2.1#53
Non-authoritative answer:
Name: apple.com
Address: 17.251.200.70
So, the router is giving up the IP address. Also, even though Safari, Firefox and others report no internet, nslookupk continues to work. The router works, but 10.6.1 doesn't seem to like what it gets from the router. Also, not sure a firmware upgrade is required for the router, if there even is one, because it works with both of my PCs and my Mac running 10.5.8.

Unable to maintain communication within the company Intranet

I have been trying to maintain communication with a fieldpoint module on the company intranet. I have tried version 3.2 and 5.02 firmware version on a FP 1600. On version 5.02, communication last only about 10 minutes. With the 3.2 version, I can sometime maintain communication up to 3 hours.
The fieldpoint will loose communication and all the status light indicates that the device is working correctly except you can not communicate with it at all. The only way to start communication is to power off and power on the module. The program or Max can then restablish communication.
I tried to downgrade the fieldpoint to 3.2 but I keep getting a communication error whenever I try to dow an upgrade. This occurs
even if the unit is on a separate LAN. I have been able to determine if the the unit is on separate LAN, the unit will work for hours without a problem. It seems that when it goes on the intranet, the Fieldpoint unit will just freeze and die.

Hello Joseph,
I will be taking your case from now on. I am going to try and replicate your issue and will let you know of any updates as I go along.
You can find problems and solutions with the FP 1600 by searching through our Knowlege Base. You can type any question you have on the search box at NI.com and see if there is a KB about that.
Please allow me a couple of days to try and reproduce your issue. I will be getting back to you shortly.
LA

Unable to maintain job title for employees

Hi friends
we getting employees data from R/3 HR .but i am trying to assign the job titles to employees in CRM systems through relationship category but here i am getting error "Maintenance is only possible via an external HR system".here if choose continues i am getting job title etc.. i can give input for job title but thing it is not saving. Could any one please suggest me how to do add the job titles.
whether it can be possible change in CRM or not.
If it is HR how could i add it.
Earlier reply would be appreciated
Thanks in advance
Rao

Rao,
Have you looked at OSS Note 312090? Maybe you can find something here. The titles in HR is stored in another table as the BP titles. They should be replicated using an R/3 adapter object or kept the same as the BP titles.
If nothing helps you could consider temporarily switch off the block for maintaining the employee in CRM. If I remember this is done by setting key PBPHR to OFF.
Points if this helps.
Regards,
Nico

Unable to Maintain different Headers and footers in a multiple RTF template

Hi All,
I have a very complex requirement to Print Custom Invoice reports. The Report Consists of Three Templates 1) Invoice 2) Custom IMEI 3)Remiitance Slip.
I have coded XMl such that for a given header level data all the corresponding data will be generated Including for Custom IMEI and Remittance Slip. So for the RTF design, In a word document i have three templates and the for every transaction all this three should be printed. so if there are 10 transactions than we need to print 10 sets (all 3) of invoices. The first Template is Invoice which has a header with all required information. If for the first template the lines data exceeds first page then on the second page the header needs to be printed only as Customer name, Transaction Num and page number. if the line level data goes more than 2 pages than the header needs to be same as that of 2nd page. On the last page of invoice template the totals and footer needs to be printed.
After completion of invoice template Custom Imei template and remittance template must be printed for given transaction. But they shouldn't have any header or footer associated.
Is this Functionality achievable by Oracle BI publisher RTF design?? If yes how would i code it in RTF. I have tried almost all possible solutions given in XML publisher User guide. Invoice template header and footer are repeating in other templates too.
Issues are : 1) All there templates are tied together, so the header in First template, if it's line level data exceeds to second page should be different.
2) Footer of the First template should only be displayed at the end of first template with Invoice totals.
3) Header and Footer should not be part of template 2 and 3 which are tied to template one.
Please, help me out with a solution, if needed i will provide the XML and RTF template too. I hope Someone really knows how to break this puzzle. Thanks for the help in advance

Hi,
My Req was for Three different templates tied together. So, if the First template exceeds page 1 then itz header should be a different one. Similarly with second template but they were independent of each other.
In Your case you may probably try using MS word different First page header functionality to acheive different header from second page.
Does this help?

Unable to maintain the tab active in dynpro

Dear Experts,
I have a normal screen '100' which has a tabstrip control 'TABSTRIP'. It has two tabs with two subscreens.
When I do some operation in the subscreen, PAI is getting triggered and the control is coming back to the normal screen 100.
I want the control to stay in the same subscreen.
I am not able to use
IF tabstrip-activetab IS INITIAL.
tabstrip-activetab = 'TAB2'. (TAB2 is the fct code of second tab)
ENDIF. in PBO of the main screen..
I have also declared CONTROLS: TABSTRIP TYPE TABSTRIP. globally in the main program.
The error message is "Statement "TABSTRIP-ACTIVETAB" is not defined. Check your spelling."
How do I overcome this??
Thanks and Regards,
Kawish

Hi everyone...thanks!!
I did check the read only issue first, and that wasn't it... and I made sure they were just text fields and never started out as radio buttons...
At one poin,t a bad param error popped up..... ah ha!!
So, I exported the file back to postscript (deleting all the fields first)
and then made new ones and it worked fine...
Must have been a corrupted file ;-)
Thanks for the help!!!!
babs

Cluster Node Unable to Maintain Cluster Membership

My cluster logs are very similar to the above thread... was it ever addressed?
[SV] Already protecting connection with message security level 'sign'
[FTI] Stream already exists to node: false
[Channel IP to another cluster node member] Close()
GracefuleClose(1226) because of channel to remote endpoint another cluster node
~ is closed
Cluster services stops and generates:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server serverName$. The target name used was
serverName.
This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN
is only registered on the account used by the server.
Roderick Lyons

Hi Roderick Lyons,
Could you tell us the exact URL “above thread” I am not very sure which thread you meaning.
Please offer more information about your environment, such as, the DC server edition, the cluster node server edition.
If you are 2003 and 2012R2 mixed DC environment please restart your cluster node then do the further monitor.
The related article:
It turns out that weird things can happen when you mix Windows Server 2003 and Windows Server 2012 R2 domain controllers
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
Can't log on after changing machine account password in mixed Windows Server 2012 R2 and Windows Server 2003 environment
http://support.microsoft.com/kb/2989971
From the current error another possible is you never run the cluster validation before you create the cluster, please run the cluster validation first then post
the warning or error information.
If above solution not work please consider reboot your PDC at unproductive time.
More information:
Kerberos Service Principal Name on Wrong Account
https://support.microsoft.com/kb/2706695?wa=wsignin1.0
Fixing the Security-Kerberos / 4 error
http://blogs.technet.com/b/dcaro/archive/2013/07/04/fixing-the-security-kerberos-4-error.aspx
Service Principal Names (SPNs) SetSPN Syntax (Setspn.exe)
http://social.technet.microsoft.com/wiki/contents/articles/717.service-principal-names-spns-setspn-syntax-setspn-exe.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Creating a New Forecasting profile for MRP

Hi there,
Please can somebody let me know how do I create a new Forecasting profile for MRP.
I want to see this in table MRPR once created. (field PROPR).
Kind Regards,

Dear marelizen
Use transactio code MP80.
Creating a Profile
The information contained in this info object is relevant to the material master for industry and to the article master for retail. Retail customers are requested to substitute:
article for material
requirements planning for material requirements planning or MRP
1. In the Material Master menu, choose Profile ® MRP profile or Forecast profile ® Create.
The initial screen appears.
2. Enter the name you want to give the profile.
If you want to use an existing profile as a reference, enter its name under Copy from so that the system can copy its values to the new profile.
3. Choose Selection screen.
The selection screen appears. It shows all the fields that can be copied to the MRP or Forecasting screen in the material master record.
4. Enter a profile description and select the fields you want the profile to contain, specifying whether each field is to be copied to the material master record as a fixed value or as a default value.
It is not possible to select Fixed lot size and Maximum stock level in a single MRP profile. However, if you select Maximum stock level, you must also select Lot size (materials planning).5. Choose Data screen.
MRP profile data is spread over two screens. To switch from one screen to the other, choose Data screen 1 or Data screen 2.
When you access the data screen from the selection screen, the system checks whether the fields selected are allowed to appear in the same profile.
The data screen appears, containing only the fields you selected on the selection screen. The fixed values and default values are displayed in different colors. All fixed values are required fields except where the field can also be left blank.
If, in the forecast profile, you enter N or 0 as the forecast model, no forecast is made.
Like forecast model N, if you enter forecast model 0 when maintaining a forecast profile, you will be unable to maintain any other field in the profile.
Unlike forecast model N, forecast model 0 deletes any existing forecast values when you change the material. This ensures that these values are no longer included in materials planning.
6. Enter the corresponding values and save the profile.
If the system detects inconsistencies or errors, it asks you to change the fields selected on the selection screen and/or to correct the values. Otherwise, the initial screen appears, where you can begin to create another profile.
warm regards
Ramakrishna

Unable to derive funds center in F-90 Asset purchase from vendor

Dear All,
I have maintained the fund center value in the asset master and also maintained the derviation rule in FMDERIVER for a combination of Cost Center > Funds Center.
When i try to post asset purchase using F-90 t-code, it is asking me for funds center in the asset line item. The system is not deriving the value from asset master or derivation rule maintained. I am unable to maintain the funds center in the posting as the field is grayed out.
Request you to kindly provide your valuable suggestion.
Best regards
Abishay

Hello,
The fund center has to be activated for Account Assignment Type 01 (APC Value Posting)
Maybe note 437076 could help to check the settings in the following IMG activity :
   Activate the account assignment elements for each transaction and
   account assignment type:
   Asset Accounting -> Integration with the General Ledger ->
   Additional Account Assignment Objects -> Define Account
   Assignment Types for Account Assignment Objects
I hope it helps,
Hélène

Unable to maintain forecast

Similar Messages

Maybe you are looking for