Unable to maintain job title for employees

Hi friends
we getting employees data from R/3 HR .but i am trying to assign  the job titles to employees in CRM systems through  relationship category but here  i am getting error "Maintenance is only possible via an external HR system".here if choose continues i am getting job title etc.. i can give input for job title but thing it is not saving. Could any one please suggest me how to do add the job titles.
whether it can be possible change in CRM or not.
If it is HR how could i add it.
Earlier reply would be appreciated
Thanks in advance
Rao

Rao,
Have you looked at OSS Note 312090? Maybe you can find something here. The titles in HR is stored in another table as the BP titles. They should be replicated using an R/3 adapter object or kept the same as the BP titles.
If nothing helps you could consider temporarily switch off the block for maintaining the employee in CRM. If I remember this is done by setting key PBPHR to OFF.
Points if this helps.
Regards,
Nico

Similar Messages

  • How to maintain Service Arrangements for employees in CRM 5.0

    Hello,
    in the CRM documentation on help.sap.com (http://help.sap.com/saphelp_crm50/helpdata/en/da/7d808043d244cf806dcf0d6e69381e/frameset.htm) it is mentioned that one can maintain service arrangements for employees. These service arrangements contain - for example - service areas and qualifications of the employee (ressource).
    I know where to maintain the customizing values, however, I didn't find out where to maintain the service arrangements for the employees.
    Any idea?
    Thanks & regards
    Wolfgang

    Hi ,
    for this you need to go to trnasaction PPOMA_CRM - Maintain Organizational Model
    and in this you need to open your organization model and there you need to assign employees.
    for this you need to select the post and right click on that and there is assign filed is there. after selecting that there is two position holder and owner.
    so you select holder for the position. then you can assign the employee to that service area.
    thanks
    hemant

  • Maintaining Service Arrangement for Employees: Address type-ID not availabl

    Hello,
    I´m facing the following problem while implementing CRM Service via Best Practices for CRM V1.70:
    Building Block Configuration Guide C26 CRM SERVICE:
    Section 3.3.3 WFM Core Settings:
    3.3.3.1     Maintaining Service Arrangements for Employee
    Assignment Block u2018Service Arrangementsu2019:
    In Assignment block Location there is no address type-ID u2018XXDEFAULTu2019 for adress source u2018Organizationu2019. Thus I receive the following error message: u2018Enter a valid address usage typeu2019. Address type-ID u2018XXDEFAULTu2019 is only available for adress source u2018Individualu2019.
    What exactly do I have to do in order to make address type-ID u2018XXDEFAULTu2019 also available for adress source u2018Organizationu2019.
    Thanks in advance.
    Best regards,
    AEV

    Hi,
    I am facing similar problem what did you do to resolve it.
    Thanks in advance.
    Rahul

  • Finding department and job title of employee in org model

    Hi all,
    Are there any Function Modules that can find out the department and job title (such as manager, director, etc) of an employee in SRM's org model (SRM4.0)?  What DB table(s) is this information stored in?
    Thanks!
    Jay

    Hi,
    You can use the FM "BBP_READ_ATTRIBUTES"  to read all the attributes of a user in the org structure.
    Other FM's;
    CRM_EMPLOYEE_GETORGUNIT
    DWP_GET_RESPONSIBLE_ORGUNITS
    BBPU_GET_ORGUNIT_AND_COUNTRY
    BBPU_GET_USERS_OF_ORGUNIT
    BBP_OM_USR_READ_WORKPLACE_ADDR
    RH_READ_OBJECT
    RH_READ_INFTY
    BBP_OM_STRUC_GET_ORG_FROM_POS
    BR,
    Disha.
    Do reward points for  useful answers.
    Do reward points for  useful answers.

  • IPhone spotlight doesn't search job titles for contacts

    I think this is so strange that you can't find a contact in your iPhone by searching for job title. Is there a way to turn this on somehow? Some setting I'm missing?
    I'm imagining the bathroom sink springing a major leak:
    "Honey! Grab the iPhone and call the plumber!"
    "What's his name?"
    "I can't remember right now! There's water spraying everywhere! Just search for plumber and you'll find him..."
    Not gonna find him. Enjoy your leak.
    Seems like a strange oversight. Spotlight on the computer at least brings up a couple of matches.
    Weird. No?

    Obviously the more fields that are searched the slower the search will be, but I would really like it to search all fields even if it does take longer...
    My 10 year old Handspring Prism smartphone did it
    What fields to search could be a selectable feature within the OS.
    I've submitted a suggestion as well...

  • Job Scheduling for Employee Vendor master creation

    Hi,
    We want to automate the activity of creating the employee vendor master.
    If an employee is hired today, a job should run tonight and create his vendor master based on the no range set.
    I believe we need to use program PRAA.
    We have 5 company codes with 5 different no ranges.
    Please suggest with steps on how to do this?
    Thanks
    P909922

    Hi
    The reference vendor is given correctly so that it comes under the company code for which the employee is hired....
    the problem is that the system picks up the first pernr (first employee in the system), reference vendor and matches these together and throws the error message
    "Reference vendor 0000pernr , company code XXXX do not exist"
    So I understand that if the employee is hired for the same company code of first pernr, this will become successful....
    But, how do we do this this activity for remaining 4 company codes? for remaining 4 company codes, we will get the same error message.
    Any suggestions?

  • Business Partner - Title for Employee

    Hi All,
    When we create BP, at Title drop down we have only Mr & Ms, I want add here one more option as M/s, How can I add here ?
    I can create as Org, but here we have few external consultants, for whom we will create a user ID with their respective company Name.
    regds,
    CB

    As far as i can tell, u can use EEWB to realize enhancement for the Trx BP ( like add a tab), but im not sure its possible to archieve wut u want

  • Unable to enter Bank details for Employee

    Hi,
    Is there any possibility to enter Bank details for the Employee in Employee Master Data. This is credit any salary to the employee.
    The provision given for setting up the bank accounts is not getting reflected in the EMD screen. Can anyone please help.
    Regards
    Balaji

    Hi Balaji,
    Please select the county in the Address tab which will automatically display all the
    bank names defined for that country code under Finance tab.
    Regards,
    Vijay kumar

  • Maintaining Email Title In Nace for Invoice

    Hi ,
    I have a requirement to maintain Email title for my outpu type.
    I use the print Program : SD_INVOICE_PRINT01.
    In Nace for my output type I have configured the Program : SAPMV60A and Form Routine as TEXT_SYMBOL_REPLACE.
    In the Email Titile I maintain Invoice &VBDKR-VBELN& /  &VBDKR-BSTNK&.
    But In my mail I donot get any email title.
    This requirement is a high prio one as I need to configure email title for amny output types.
    If any one had done this sort of development indly let me  know.
    Thanks.

    Vishnu,
    &NAST-OBJKY& will always have the latest Billing Document Number.This will ensure that right billing document is getting populated in the Doc Title of SOST in both the cases of Billing Document getting created in Foreground using VF01/VF02 and also in background using VF04.During testing you need to test both the scenarios.Hence always use &NAST-OBJKY& instead of &VBDKR-VBELN& or &KOMKBV3-VBELN& or other fields.
    Related SAP Notes
    SAP Note_0000537832
    SAP Note_0000718017
    SAP Note_0000796873  ( just for info-no need to implement this exit )
    SAP Note_0000432049  ( just for info-no need to implement this exit )
    K.Kiran.

  • Issues while adding job title  of a Business Partner through rel ship cate

    Hi friends
    we are getting employees data from R/3 HR . i am trying to assign the job titles to employees in CRM systems through relationship category but here i am getting error "Maintenance is only possible via an external HR system" .here if choose continues i am getting job title in change mode . i can give input for job title but  it is not saving. Could any one please suggest me how to do add the job title.
    whether it can be possible to change job title in CRM or not.
    If it is HR how could i add it.
    Earlier reply would be appreciated
    Thanks in advance
    Rao

    Hi friends
    we are getting employees data from R/3 HR . i am trying to assign the job titles to employees in CRM systems through relationship category but here i am getting error "Maintenance is only possible via an external HR system" .here if choose continues i am getting job title in change mode . i can give input for job title but  it is not saving. Could any one please suggest me how to do add the job title.
    whether it can be possible to change job title in CRM or not.
    If it is HR how could i add it.
    Earlier reply would be appreciated
    Thanks in advance
    Rao

  • Job key in employee master

    Hi,
    I am maintaining Job key in employee master PA30. But I am getting error Object S 50000100 01 does not exist
    I made following settings.
    IMG>Personnel Administration>Organizational Data>Organizational Assignment>Organizational Plan
    Define organizational units, define jobs,define jobs and categories and define positions.
    still i am getting Object S 50000100 01 does not exist* this error.
    Could anybody help me
    Regards,
    Chandra

    Hi,
    I have created position in OG30 and attached job to position.
    Where should i assign to org unit?
    Is PP01 is different from OG30?
    Regards,
    Chandra

  • Company Name / Job Title Bug in Z10

    On my Z10 if you enter a job title for a contact without a company name, the job title is displayed twice for the contact.  For example, Bla Bla contact shows "Attorney at Law" and immediately below that is another line that says "Attorney at Law."  I have experimented and it will duplicate any job title I entered unless there is a company name entered for the same contact.  For example I updated Bla Bla with the job title of "Yo Mamma" and I got the same results.
    I'm using a BlackBerry Z10 Model STL100-4 running 10.0.9.411 with Verizon.

    Hi PaulTSF,
    Do you see the title appearing twice when viewing the contact card or from the main contact list screen? Can you take a screen shot so I can get a better idea of what you are seeing?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Unable to update my job title in my contacts

    I am unable to update my Job Title in the contact entry for myself. I can change other people's Job Title and I can change the other information on my contact entry, but I cannot change my Job Title. I can re-type and erase the text, but when I click "Done" it reverts back to the original entry. It never saves any of my changes to this field. Is there a step that I am missing?

    Each application has the Apple ID used to download it stored inside it. This can’t be removed without deleting and redownloading it.
    (123829)

  • Populate Error Message while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee

    Hi Team,
    We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
    We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
    Please suggest how to do this.
    Thanks,
    Ravi

    Hi Rajesh,
    Thanks for the reply...
    We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
    So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
    Thanks,
    Ravi.

  • How do I get to display employee job titles within a list?

    I want to create a list that will hold employee data. I have a requirement to auto populate a second column based on a previous entry in the first column. More details....if the end user enters in an employee name in the first column, I want to be able to
    display the selected employee's job title in the second column. Is there a way to do this without writing custom code in SharePoint? Is there a way to use a lookup column to display this information? If so, how?
    I really appreciate the help/ideas. Thanks.

    Hi,
    As I understand, you need to auto populate Job Title per an account name in person or group field.
    I'd suggest you use InfoPath rule to auto populate. If you need to get properties in User Profile, you can refer to the article below:
    http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
    However, Job Title is not listed. We can use User Information List to get Job Title of user. By default, Job Title is not available in User Information List. Please go to User Profile Service Application > Manage User Properties > Job Title > Edit
    > Policy Settings, uncheck User can override and check Replicable.
    Then manually run timer jobs below:
    Now check User Information List via
    http://sitename/_catalogs/users/simple.aspx  > Edit page > edit web part > edit current view, see if Job Title is listed.
    If so, then we can use UIL list to get Job Title value per Account name.
    Regards,
    Rebecca Tu
    TechNet Community Support

Maybe you are looking for

  • FI- process flow charts

    hello, .I need FI- process flow charts. like exp: ar,ap,bank.assetaccounting.  like pls help anyone. rajesh

  • Data level security for 30000 profir centers

    Hello Gurus I have a requirement to implement data level security for 30000 profit center . Now I can think of creating the groups and applying security filters ( both on Dimesion & Fact) on the top of that. But I cannot do so as I will have to creat

  • How can I view all image files

    I have a large number (many thousands) of digital image files which over the last 14 years have been labelled and filed very poorly.  I am now seeking to sort them out.  Is there a way to see all the images in a folder structure?  So the situation is

  • Usuario SAP conectado en Query Layout

    Hola a todos. Alguien sabe como mostrar el usuario de SAP actualmente conectado en un query layout? intente con la variable $[USER] pero no trae nada cuando ejecuto la consulta desde el query manager. No sé si alguien tuvo un problema parecido y pued

  • BPC440 - SAP BPC - Consolidation

    Hi Experts, I am learning the consolidation using the SAP BPC440.pdf in that there are few dimension members which are empty how to find the complete dimension members and in few tasks ( exercises ) it asks me to go to remote computer -> C-Drive -> B