Unable to obtain inventory from some XP PC's

I am unable to obtain version 7.5 inventory info from a handful of XP PC's. I believe it's something to do with this WifName registry entry which is blank on a PC where I cannot obtain inventory.
I have uninstalled the 7.5 client, deleted the registry contents as it leaves them there, deleted the Asset Management firectory from within program files as it doesn't completely uninstall the directory either, and re-installed from scratch. After the new installation the WifName registry entry is still blank.
I am runing the command manually "cclient.exe scannow:edit". This all works on my PC logged on as me but not on another Pc logged on as me. This rules out the Asset Management server, policies, rights to the registry etc which have all been suggested as problms in previous posts.
The ZAM Client and Collector have full access privileges to the ZAM
portion of the Program Files directory as well as to their own portion of
the registry at HKEY_LOCAL_MACHINE\SOFTWARE\Tally Systems
Corp.\TSCensus\CollectionClient.
The ZAM collection client is set in the services to run as a local
system account on ALL PC's.
I believe I need to know why this entry is blank to fix the problem.
Secondly, when I run the Setup.exe program to install the client, it asks for my Server name from which it populates cps.ini like so:-
[CollectionServer]
Insight
[CollectionClient]
InBoxCC
however when I run the .msi that I found today, it doesn't ask for any info and the cps.ini file looks like this:-
[CollectionServer]
[CollectionClient]
Is this significant?
My colw32.log file also contains the message "failed to get WIF path", all the time on the PC that fails but only sometimes on my PC.
Thanks
Lenny

Found out what the problem was. The Windows firewall was switched on for the PC's that didn't work.
Lenny

Similar Messages

  • Content Presenter unable to obtain content from UCM for 4 minutes

    We spent about 4 days trying to figure this out until I tried something that worked, based on the log stack traces that I have included. The symptom was that the Home page for the WebCenter Spaces application would often take 4-5 minutes to load. The mechanics, from the trace, are that the Content Presenters, which were only used to display a single image, were unable to load the image from UCM. We got a socket time out, but eventually the image was obtained and the page finally loaded. It did not happen every time, but happened so often that it the Application was unusable. I worked around this problem by using an HTML Markup with <img src=”…. “/>. In 2 of the 3 presenters, they were already using HTML Markups just below the Image, so I just added the image to their markup. This worked just fine, but I am concerned that this occurred using the content presenter – a mainstay of WebCenter. I still am not sure what caused this but it seemed to be some access problems using the UCMBridge.
    BTW, this is a production environment and thus jrockit is being used.
    I would like a good explanation for this, otherwise I think an SR should be filed to get Oracle to either fix this or explain what is going wrong here and how we can avoid it.
    [2012-04-19T16:32:42.174-07:00] [WC_Spaces1] [ERROR] [] [oracle.webcenter.content.integration.RepositoryException] [tid:
    [ACTIVE].ExecuteThread: '66' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ShivraS1] [ecid: 57473f0c05d9b7
    e0:723c8f24:136c801f307:-8000-000000000000e68e,0] [APP: webcenter#11.1.1.4.0] [[
    oracle.webcenter.content.integration.RepositoryException: oracle.stellent.ridc.protocol.ProtocolException: java.net.Socke
    tTimeoutException: Read timed out
    at oracle.webcenter.content.integration.spi.ucm.UCMBridge.getAccessLevel(UCMBridge.java:856)
    at oracle.webcenter.content.integration.spi.ucm.UCMBridge.getAccessLevel(UCMBridge.java:834)
    at oracle.webcenter.content.integration.spi.ucm.UCMBridge.getUCMAccessLevel(UCMBridge.java:2622)
    at oracle.webcenter.content.integration.spi.ucm.UCMBridge.checkSecurityLevelForNode(UCMBridge.java:2585)
    at oracle.webcenter.content.integration.spi.ucm.UCMBridge.canAccessNode(UCMBridge.java:2554)
    at oracle.webcenter.content.integration.spi.ucm.NodeOps.getNodeFromCache(NodeOps.java:737)
    at oracle.webcenter.content.integration.spi.ucm.NodeOps.getUCMNodeWithId(NodeOps.java:1514)
    at oracle.webcenter.content.integration.spi.ucm.NodeOps.getNodeWithId(NodeOps.java:153)
    at sun.reflect.GeneratedMethodAccessor20824.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.webcenter.content.integration.federated.internal.delegate.LatestInterfaceVersionWrapper.invoke(LatestIn
    terfaceVersionWrapper.java:73)
    at $Proxy223.getNodeWithId(Unknown Source)
    at oracle.webcenter.content.integration.federated.internal.filter.logging.NOPSLoggingFilter.getNodeWithId(NOPSLog
    gingFilter.java:101)
    at sun.reflect.GeneratedMethodAccessor20823.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.webcenter.content.integration.federated.internal.delegate.LatestInterfaceVersionWrapper.invoke(LatestIn
    terfaceVersionWrapper.java:73)
    at $Proxy223.getNodeWithId(Unknown Source)
    at oracle.webcenter.content.integration.federated.internal.filter.validation.NOPSValidationFilter.getNodeWithId(N
    OPSValidationFilter.java:131)
    at sun.reflect.GeneratedMethodAccessor20822.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.webcenter.content.integration.federated.internal.delegate.LatestInterfaceVersionWrapper.invoke(LatestIn
    terfaceVersionWrapper.java:73)
    at $Proxy223.getNodeWithId(Unknown Source)
    at oracle.webcenter.content.integration.federated.internal.filter.cache.NOPSCacheFilter.getNodeWithId(NOPSCacheFi
    lter.java:129)
    at sun.reflect.GeneratedMethodAccessor20821.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.webcenter.content.integration.federated.internal.delegate.LatestInterfaceVersionWrapper.invoke(LatestIn
    terfaceVersionWrapper.java:73)
    at $Proxy223.getNodeWithId(Unknown Source)
    at oracle.webcenter.content.integration.federated.internal.delegate.NodeLogic.getNode(NodeLogic.java:240)
    at oracle.webcenter.content.integration.federated.internal.NodeManagerImpl.getNodeByUUID(NodeManagerImpl.java:243
    at oracle.webcenter.doclib.internal.model.presenter.vcr.PresenterRetrievalUtil.getNode(PresenterRetrievalUtil.jav
    a:245)
    at oracle.webcenter.doclib.internal.model.presenter.vcr.PresenterRetrievalUtil.getNode(PresenterRetrievalUtil.jav
    a:88)
    at oracle.webcenter.doclib.internal.model.presenter.vcr.SingleNodeRetrieverImpl.getNode(SingleNodeRetrieverImpl.j
    ava:68)
    at oracle.webcenter.doclib.internal.view.presenter.PresenterRetrievalService.getNode(PresenterRetrievalService.ja
    va:119)
    at oracle.webcenter.doclib.internal.view.presenter.ContentPresenterBackingBean.getNode(ContentPresenterBackingBea
    n.java:212)
    at oracle.webcenter.doclib.internal.view.presenter.ContentPresenterBackingBean.getResult(ContentPresenterBackingB
    ean.java:146)
    at sun.reflect.GeneratedMethodAccessor1299.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at javax.el.BeanELResolver.getValue(BeanELResolver.java:261)
    at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    ... 1 more
    Caused by: java.net.SocketTimeoutException: Read timed out
    at jrockit.net.SocketNativeIO.readBytesPinned(Native Method)
    at jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:32)
    at java.net.SocketInputStream.socketRead0(SocketInputStream.java)
    at java.net.SocketInputStream.read(SocketInputStream.java:129)
    logic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    ... 1 more
    [2012-04-19T16:32:42.178-07:00] [WC_Spaces1] [ERROR] [] [oracle.webcenter.content.integration.RepositoryException] [tid:
    [ACTIVE].ExecuteThread: '66' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ShivraS1] [ecid: 57473f0c05d9b7
    e0:723c8f24:136c801f307:-8000-000000000000e68e,0] [APP: webcenter#11.1.1.4.0] Apr 19, 2012 4:32:42 PM oracle.webcenter.co
    ntent.integration.spi.ucm.UCMBridge getUCMAccessLevel[[
    SEVERE: Cannot get security info for node ID: /wc_ucm_conn/UCM_CLUSTER-000084
    oracle.webcenter.content.integration.RepositoryException: Apr 19, 2012 4:32:42 PM oracle.webcenter.content.integration.s
    pi.ucm.UCMBridge getUCMAccessLevel
    SEVERE: Cannot get security info for node ID: /wc_ucm_conn/UCM_CLUSTER-000084

    The socket timeout option is not viable because it already takes 4 minutes to get to this point, which is way too long for the customer. I read another post that I cannot find any longer about a setting in the UCM config.cfg file about a SecurityFilter setting that was "..." Trouble is, they don't say which config.cfg as there are at least 4 config.cfg under the ECM dir under the Middleware Home Dir. It is the same file that holds the RidcSocket setting (usually 4444), but in our installation, the socket is set in EM and is not in any of the config.cfg file. If you could clarify the exact setting and which config.cfg file to try, I would appreciate it.
    Thanks.

  • Difficulties of obtaining informations from some computers

    We have installed MAP, we have "run" the first option ("identity computers that ...") but at the end of the inventory, some WMI Status are "Failed - Connection time out" and others are "Failed - RPC Server Unavailable", one is "Failed - Access Denied" and 3 are "Failed - Other Reasons".
    We have also seen that "Computers running Windows XP Home edition cannot be inventoried and assessed because remote WMI connections are not allowed to computers running this version of Windows XP".
    So we have done a test and apparently the problem comes from Win XP Firewall but we can't disable it on each computer...
    1) Can somebody explain me what  could be the reasons of each "failed" of WMI status?
    2) Has somebody a solution to obtain results (with GPO or anything else) without disabling manually WinXP Firewalls on each computer ?
    Thank you in advance for your help!

    Hello Jean-Michel
    You can shared this information, because I make inventory of several XP, but I receive the same messages.
    Thank
    Hugo Monge

  • Unable to open pdf from some particular shared folder which is not in domain

    Encountered a strange issue here.
    We have copuple of users who login with Citrix session.
    They are able to open pdf from all the shared folders but not one which is not in domain.
    User are able to open all other files viz. doc, excel, notepad and so from that particular folder.
    Issue with all the pdf files and not only one particular file.
    Double clicking the pdf file starts the process AcroRd32.exe but the file does not open.
    If an already running AcroRd32.exe process is there (means if Adobe Reader is already open), then it's possible to open the pdf files from that folder.
    Moreover, came across one strange thing.
    I created a shortcut to one of the pdf file from that folder within the same folder.
    And it was possible to open pdf file from that shortcut but not directly :S
    Gives error: "Acrobat failed to connect DDE server" after about 20 mins if we try to open file directly.
    Googled a bit and found that issue can be resolved by navigating to
    HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and changing the Key "AcroviewA10"  to  "AcroviewR10
    But when I navigated to the mentioned registry there was no AcroviewA10 but instead it was just Acroview.
    Adobe Reader version: 9.5.5
    I will be really grateful if somebody can provide solution for this.

    What happens when you open the Adobe app, then tell it to open the file?
    How big are the attachments?  There are limitations to the size allowed to be sent:
    Email Provider
    Size Limit
    Gmail
    25Mb
    Outlook
    20Mb
    Yahoo
    25Mb
    Are you sending the files to yourself?  Not sure how you are emailing files from a website...
    Are the PDF's password-protected, or some kind of copyrighted eBook perhaps?  Can you email other files successfully, or are PDF's the only files that don't work?
    Perhaps using a free Cloud service as an intermediary might work better.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Obtain Inventory from Printers conected to one computer and conected to the network in SCCM 2012

    Hi i have a question how can i obtain information about computers in my network and the printers conected to one computer, i would like to obtain information like manufacturer, model and serial number, what do i have to activate to do this i wait for your
    commets thaks.

    If you are using ConfigMgr 2012, you can enable inventory of local printers with the Printer Device (Win32_Printer) which will give you make/model and capabilities information.  I do not believe it reports the serial number, since this is going to be
    handled differently by every printer manufacturer. 
    If you are using only HP, there are ways to script getting this information.
    I hope that helps,
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you found a bug or want the product to work differently,
    share your feedback.
    <-- If this post was helpful, please click the up arrow or propose as answer.

  • Unable to obtain 4G from my network with the Z10

    I recently purchased my z10 from verizon in the United States unlocked. When i inserted the sim card of my local network (4G plan) i was only able to identify an 'E'  in the upper right hand corner of the screen. After speaking with my network provider their agent said that it was the phone or a possible setting which i needed to make because after trying the same sim card in one of their own phones they observed the '4G' on the screen.
    please advise......

    Hi and Welcome to the Community!
    Your issue may actually be worse...there are 4 different Z10 models, each with different capabilities...refer:
    http://www.bbin.in/en/2013/03/03/4-types-blackberr​y-z10-models-fits-better/?utm_campaign=4-types-of-​...
    If the device you have does not support the 4G bands of the network you are attempting to operate it on, then that would of course fully explain the problem.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • LMS 3.2 : Can't collect inventory from Nexus 5010

    Hello,
    I've added a Nexus 5010 to LMS, and it recognized it as such, and it was also able to archive its configuration.
    But LMS is unable to collect inventory from it : the error message is "Device Sensed, but collection failed".
    I am able to do an snmp walk of the device and I do see the ENTITY mib.
    I am running LMS 3.2 with no RME patches or device package updates.
    I've attached the relevant portion of IC_Server.log.
    The Nexus 5010 is running NX-OS 4.1(3)N2(1a).
    Thanks for the help,
    Alex.

    >> I am running LMS 3.2 with no RME patches or device package updates.
    So why not update the dev pkgs, then try again?
    The latest RME pkg for Nexus is apparently v2.4, whereas I'm collecting the 5010s fine with v2.3.
    704.
    1.3.6.1.4.1.9.12.3.1.3.798
    Cisco Nexus 5010 Switch
    Nexus
    2.3

  • I am unable to receive texts on my new LG G2 when sent from some other iPhones

    I had an iPhone 4 and switched to LG G2 android.  I am unable to receive texts on my new LG G2 when sent from some other iPhones.  I've done everything Sprint and Apple have suggested - turned off imessaging, made sure the contact info on the other iPhones is plain mobile numbers, deactivated my iCloud account.  Nothing is working.  Anybody have any suggestions?

    See this support document http://support.apple.com/kb/TS5185. If you have done everything there, then look at the last line which says to get in touch with Apple Support. This is not Apple support, this is a user to user forum. Call Apple support based on your location with information from this support document. http://support.apple.com/kb/HE57

  • Unable to delete email from trash bin.  How do I do this?  If I select and chose delete, it doesn't.  What am I doing wrong?  My grand daughte is using my iPad and I don't want her to see some of the mail there.

    Unable to delete email from trash bin.  How do I do this?  If I select and chose delete, it doesn't.  What am I doing wrong?  My grand daughte is using my iPad and I don't want her to see some of the mail there.

    There are two ways that should work. When you are in the trash folder, you can swipe on the email in the list - left to right - and a red Delete button should pop up. Or you can select - Edit - at the top of the list of messages and then select the message and tap delete.
    Not sure exactly how this works - but if you have restrictions enabled - especially since you let your grandchild use the device - that may be restricting what you can do in the mail app. Go to Settings>General>Restrictions. If you have it set to on - turn it off or see if you have mail restricted.

  • Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • Unable to clear Stock from Inventory

    Hi All,
    We have a issue where in user is unable to clear stock from inventory , basically these stocks are sales order stocks. When we check for sales orders they are not available in the system now.
    When we try to do MB1B using movement type 413E, we get the error message saying the sales order does not exist.
    Kindly reply  is there is any way to clear this stock as the sales order is not existing in the system.
    Regards,
    Gopal

    Please check this answered link:
    Re: Material showing in system.
    how to scrap sales order stock if the referenced sales order is deleted.
    Remove Sales Order Stock from MMBE.
    Re: deleted sales order
    Edited by: Afshad Irani on Jun 1, 2010 2:41 PM

  • Unable to Obtain a Connection to Hyperion Essbase from Planning Application

    Dear All,
    I have installed FDM+Foundation+HFM+Essbase+Planning 11.1.1.3 (Tomcat)
    I have stacked with the following problem:
    when I try to open my data form, I am getting
    “Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator”
    Validate Database Connection & Validate Essbase Connection are successful throw Manage Data Source menu
    Essbase user has admin privileges
    In EAS console I can make myself sure, that my application is running
    Data Form is valid (verified in Preview screen in Data Form wizard)
    Can somebody help me with it?
    Best Regards,
    Siarhei

    Thanks, John
    Summary
    Symptoms
    When attempting to connect to Hyperion Planning as the admin user, the following error occurs:
    Unable to obtain a connection to Hyperion Essbase. If the problem persists, please contact your administrator'
    Cause
    Hyperion Planning web accesses the application by making a connection to the Planning metadata in the relational repository (via Relational repository settings) and also to Essbase via the datasource settings.
    Any Essbase connection issues indicate problems with the Essbase settings in the datasource or are related to the Essbase server.
    Solution
    - Edit the datasource via the Configuration Utility.
    - Test the Essbase connection and make sure that the user used to make the connection is valid and has admin rights to Essbase.
    - Restart the Hyperion Planning service once the Essbase user has been given the correct access rights.
    - Login to the Essbase Administration Services (EAS) console and right click on the Essbase server name node -> Refresh security from Shared Services
    - Expand the applications node (under the Essbase server name node) and check that there is an application with exactly the same name as the Planning application.
    Note: Go to section 'manually recreating a Planning application in Hyperion Essbase, if the Planning application is missing in the above step.
    - Login to the application in Hyperion Planning web.
    Manually recreating a Planning application in Essbase:
    - Login to the EAS console as admin (the Essbase user used by admin must have Essbase administrator rights)
    - Go to Essbase servers -> your Essbase server name -> right click on applications -> Create application -> Using Block Storage and enter the exact Hyperion Planning Application name then click on ok.
    Note: The above step will only create the application shell without the databases.
    - Login to the application in Hyperion Planning web as admin and go to Administration menu -> Manage Database -> select database and filters (to create filter access to Essbase) and Refresh (refresh will also recreate the databases if they don't exist)
    Best Regards,
    Siarhei

  • CIFS on OES2SP3 not registering as server on WINS server - Unable to obtain server list from CIFS server.

    Running OES2P3 cifs on SLES10SP4. This server is on it's own subnet
    connected via a router to the other subnets, with the rest of the
    servers. Name resolution and CIFS file access does work, but browsing
    does not work. I found that the server registers the workstation
    service with the WINS server, but not the server service. Adding a a
    static WINS entry enables netbios name resolution. But due to the
    unability to obtain a server list from the CIFS server (a packet trace
    shows, that the request for the server list from the OES CIFS server is
    answered by the server with an unspecified server error) browsing does
    not work.
    Is browsing supported by OES2 CIFS like it is in SAMBA or does it need
    another server as browser to allow browsing to work?
    W. Prindl

    Okay, then we have the same knowledge status in that area.
    I'll try to open a SR on this question.
    W. Prindl
    Peter Kuo wrote:
    >Sorry for the delay - I fired up my VM that had CIFS configured for
    >OES2 and you're right that there is no obvious setting for WINS; if
    >its there, like you I cannot readily find it!
    >
    >The closest I can find is:
    >
    >
    >"10.2.4 CIFS Server Broadcasts the Browser Packets every Twelve
    >Minutes
    >
    >Cause: It is designed to broadcast every twelve minutes.
    >
    >Action: An entry with the NetBIOS Name and the respective server IP
    >address in LMHOSTS file must be present on Windows client machine or
    >WINS should be configured for both the server and the client."
    >
    >
    >Oh, I did find (and that was what was in the mind when I first
    >replied) that the CIFS Server Parameter page in iManager has this
    >seting:
    >
    >
    >"WINS IP Address
    >The address of the WINS server that locates the PDC, if the PDC and
    >the server running CIFS are on different subnets."

  • Error when setting up gateway on local system: "Unable to obtain the anti-forgery token from Host Service"

    I have created an account in Office 365 to try Power BI, and have set up the Power BI site so far.
    Now i want to add few data sources, for which i guess i would need to do the following:
    1) Create a gateway (i have done this)
    2) Download and Install the gateway on my local machine (Installed on my 64bit windows 8.1 laptop)
    3) Run Data Management Gateway configuration manager wizard to setup up the gateway. 
    At this step, when i enter the Gateway Key (copied from the Power BI Site), i am getting error  "unable to obtain the anti-forgery token from Host Service".
    Where should i head next? 
    Vishal Soni

    Hey Hubery,
    Its working now. Thanks for the tips.
    Few things that i learnt here:
    1) You'll need to turn the firewalls off for the local system. (I am not sure if this is required, but i just did this and it started working for me).
    2) When you are creating the gateway on Power BI site, you click on Create new gateway, and it shows you the security key. Previously i just copied and saved this key and click Finish at this step (which i guess should not be done). What we need to do is
    to keep this screen ON, download and run the Gateway setup wizard and complete the setup, while keeping the page open in power BI site.
     I am getting the Gateway up and running now.
    Vishal Soni

  • TS3899 unable to receive hotmail from iphone 4s. its keep spinning with error the connection to the server failed. Some time it downloads old mails.

    I am unable to receive email from hotmail. It is spinning with checking for email message. Some time it downloads old emails and then those emails disappears and redownloads.  some times shows connection to the server failed.  From laptop there are no issues with account or email. Any ideas?

    Hi Friend,
    Look at this discussion: https://discussions.apple.com/message/20830562?ac_cid=sa123456#20830562
    You probably will think that discussion has not the same problem as you, but probably has your answer there.
    So please have a look and try those solutions.
    Hope it will be helpful

Maybe you are looking for