Unable to open audiobooks section
Hey I'm having a really weird issue with my new 32g iPod Touch. It was working fine, but this afternoon when I tried to open the 'Audiobooks' section (under "more") it wouldn't let me open it - the screen goes black and then goes back to the home screen. It might be relevant, I bought two audiobooks from itunes this afternoon, and the problem occurred first after the sync I started after purchasing them. However, not syncing these audiobooks to the ipod hasn't fixed the problem, nor has restoring the ipod to factory settings/ resetting all settings. Does anyone have any ideas what could have caused this? What can be done to fix it?
I have this exact same problem. EXACT! I just bought a book, sync and its going to the home screen just like you said. Im gonna do a search for what you said to do, hope it helps!
Similar Messages
-
I am unable to open a section of cPanel for Awstats
I am using Mozilla Firefox,BUT all programs work correctly excepting for Awstats,which when open,all I get is all the data and information down the left hand side of the page and I am unable to open any of this program.
Any suggestions will be greatly appreciated.
Thanking you
PeterUsually reinstalling Firefox doesn't change its behavior.
Do you have any notification icons in the address bar, such as the gray shield icon indicating mixed content?
Do you want to test in a clean profile? This is the fastest way to determine whether it's a settings issue or more likely a Firefox or external software issue.
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Any time you want to switch profiles, exit Firefox and return to this dialog.
You'll click the Create Profile button. I recommend using the default location suggested, and to avoid data loss, not re-using any existing folder. Then start Firefox in the new profile you created.
Do the framed pages work any better in the new profile?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong. -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
[SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)
Radeon HD 7790 + Catalyst = Error: unable to open display (null)
Greetings,
I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint) worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
Versions:
Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
Catalyst: 14.4-10
Xorg: 1.14.5-11
Logs&Configs:
lsmod
fglrx 8672295 0
amd_iommu_v2 7174 1 fglrx
button 4765 1 fglrx
fglrxinfo
Error: unable to open display (null)
Xorg.0.conf
[ 2632.576]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2632.594] X Protocol Version 11, Revision 0
[ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
[ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
[ 2632.619] Build Date: 08 January 2014 01:35:51PM
[ 2632.629]
[ 2632.635] Current version of pixman: 0.32.4
[ 2632.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
[ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
[ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2632.690] (==) ServerLayout "aticonfig Layout"
[ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2632.690] (==) Automatically adding devices
[ 2632.690] (==) Automatically enabling devices
[ 2632.690] (==) Automatically adding GPU devices
[ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2632.690] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2632.690] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2632.690] (II) Loader magic: 0x7fac20
[ 2632.690] (II) Module ABI versions:
[ 2632.690] X.Org ANSI C Emulation: 0.4
[ 2632.690] X.Org Video Driver: 14.1
[ 2632.690] X.Org XInput driver : 19.1
[ 2632.691] X.Org Server Extension : 7.0
[ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 2632.698] Initializing built-in extension Generic Event Extension
[ 2632.704] Initializing built-in extension SHAPE
[ 2632.710] Initializing built-in extension MIT-SHM
[ 2632.717] Initializing built-in extension XInputExtension
[ 2632.723] Initializing built-in extension XTEST
[ 2632.728] Initializing built-in extension BIG-REQUESTS
[ 2632.734] Initializing built-in extension SYNC
[ 2632.740] Initializing built-in extension XKEYBOARD
[ 2632.745] Initializing built-in extension XC-MISC
[ 2632.751] Initializing built-in extension SECURITY
[ 2632.756] Initializing built-in extension XINERAMA
[ 2632.761] Initializing built-in extension XFIXES
[ 2632.767] Initializing built-in extension RENDER
[ 2632.772] Initializing built-in extension RANDR
[ 2632.777] Initializing built-in extension COMPOSITE
[ 2632.782] Initializing built-in extension DAMAGE
[ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 2632.792] Initializing built-in extension DOUBLE-BUFFER
[ 2632.797] Initializing built-in extension RECORD
[ 2632.802] Initializing built-in extension DPMS
[ 2632.806] Initializing built-in extension X-Resource
[ 2632.811] Initializing built-in extension XVideo
[ 2632.816] Initializing built-in extension XVideo-MotionCompensation
[ 2632.821] Initializing built-in extension XFree86-VidModeExtension
[ 2632.825] Initializing built-in extension XFree86-DGA
[ 2632.830] Initializing built-in extension XFree86-DRI
[ 2632.834] Initializing built-in extension DRI2
[ 2632.834] (II) "glx" will be loaded by default.
[ 2632.834] (II) LoadModule: "glx"
[ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2632.835] compiled for 6.9.0, module version = 1.0.0
[ 2632.839] Loading extension GLX
[ 2632.839] (II) LoadModule: "fglrx"
[ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] Module class: X.Org Video Driver
[ 2632.863] (II) Loading sub module "fglrxdrm"
[ 2632.863] (II) LoadModule: "fglrxdrm"
[ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
[ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
[ 2632.864] (--) using VT number 2
[ 2632.885] (WW) Falling back to old probe method for fglrx
[ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.901] ukiOpenDevice: open result is 11, (OK)
[ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
[ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
[ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 2632.905] (II) Loading sub module "vgahw"
[ 2632.905] (II) LoadModule: "vgahw"
[ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 2632.906] compiled for 1.14.5, module version = 0.1.0
[ 2632.906] ABI class: X.Org Video Driver, version 14.1
[ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2632.906] (==) fglrx(0): Default visual is TrueColor
[ 2632.906] (**) fglrx(0): Option "DPMS" "true"
[ 2632.906] (==) fglrx(0): RGB weight 888
[ 2632.906] (II) fglrx(0): Using 8 bits per RGB
[ 2632.906] (==) fglrx(0): Buffer Tiling is ON
[ 2632.906] (II) Loading sub module "fglrxdrm"
[ 2632.906] (II) LoadModule: "fglrxdrm"
[ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.908] ukiOpenDevice: open result is 13, (OK)
[ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.908] (**) fglrx(0): NoAccel = NO
[ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
[ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
[ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
[ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2632.909] (II) fglrx(0): AC Adapter is used
[ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2632.914] (II) Loading sub module "vbe"
[ 2632.914] (II) LoadModule: "vbe"
[ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
[ 2632.915] compiled for 1.14.5, module version = 1.1.0
[ 2632.915] ABI class: X.Org Video Driver, version 14.1
[ 2632.915] (II) fglrx(0): VESA BIOS detected
[ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
[ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
[ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2632.915] (II) fglrx(0): PCIE card detected
[ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2632.915] (II) Loading sub module "fb"
[ 2632.915] (II) LoadModule: "fb"
[ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2632.916] (II) Module fb: vendor="X.Org Foundation"
[ 2632.916] compiled for 1.14.5, module version = 1.0.0
[ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2632.916] (II) Loading sub module "ddc"
[ 2632.916] (II) LoadModule: "ddc"
[ 2632.916] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
[ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 2633.034] (II) Loading sub module "ddc"
[ 2633.034] (II) LoadModule: "ddc"
[ 2633.034] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Connected Display0: CRT1
[ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.034] (II) fglrx(0): EDID Version: 1.3
[ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.034] (II) fglrx(0): Gamma: 2.20
[ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.034] (II) fglrx(0): Supported established timings:
[ 2633.034] (II) fglrx(0): 720x400@70Hz
[ 2633.034] (II) fglrx(0): 640x480@60Hz
[ 2633.034] (II) fglrx(0): 640x480@67Hz
[ 2633.034] (II) fglrx(0): 640x480@72Hz
[ 2633.034] (II) fglrx(0): 640x480@75Hz
[ 2633.034] (II) fglrx(0): 800x600@56Hz
[ 2633.034] (II) fglrx(0): 800x600@60Hz
[ 2633.034] (II) fglrx(0): 800x600@72Hz
[ 2633.034] (II) fglrx(0): 800x600@75Hz
[ 2633.034] (II) fglrx(0): 832x624@75Hz
[ 2633.034] (II) fglrx(0): 1024x768@60Hz
[ 2633.034] (II) fglrx(0): 1024x768@70Hz
[ 2633.034] (II) fglrx(0): 1024x768@75Hz
[ 2633.035] (II) fglrx(0): 1280x1024@75Hz
[ 2633.035] (II) fglrx(0): 1152x864@75Hz
[ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.035] (II) fglrx(0): Supported standard timings:
[ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.035] (II) fglrx(0): Supported detailed timing:
[ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.035] (II) fglrx(0): Monitor name: L1918S
[ 2633.035] (II) fglrx(0): Monitor name:
[ 2633.035] (II) fglrx(0): EDID (in hex):
[ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2633.036] (II) fglrx(0): EDID for output DFP1
[ 2633.036] (II) fglrx(0): EDID for output DFP2
[ 2633.036] (II) fglrx(0): EDID for output DFP3
[ 2633.036] (II) fglrx(0): EDID for output DFP4
[ 2633.036] (II) fglrx(0): EDID for output DFP5
[ 2633.036] (II) fglrx(0): EDID for output DFP6
[ 2633.036] (II) fglrx(0): EDID for output DFP7
[ 2633.036] (II) fglrx(0): EDID for output CRT1
[ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.036] (II) fglrx(0): EDID Version: 1.3
[ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.036] (II) fglrx(0): Gamma: 2.20
[ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.036] (II) fglrx(0): Supported established timings:
[ 2633.036] (II) fglrx(0): 720x400@70Hz
[ 2633.036] (II) fglrx(0): 640x480@60Hz
[ 2633.036] (II) fglrx(0): 640x480@67Hz
[ 2633.036] (II) fglrx(0): 640x480@72Hz
[ 2633.036] (II) fglrx(0): 640x480@75Hz
[ 2633.036] (II) fglrx(0): 800x600@56Hz
[ 2633.036] (II) fglrx(0): 800x600@60Hz
[ 2633.036] (II) fglrx(0): 800x600@72Hz
[ 2633.036] (II) fglrx(0): 800x600@75Hz
[ 2633.036] (II) fglrx(0): 832x624@75Hz
[ 2633.037] (II) fglrx(0): 1024x768@60Hz
[ 2633.037] (II) fglrx(0): 1024x768@70Hz
[ 2633.037] (II) fglrx(0): 1024x768@75Hz
[ 2633.037] (II) fglrx(0): 1280x1024@75Hz
[ 2633.037] (II) fglrx(0): 1152x864@75Hz
[ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.037] (II) fglrx(0): Supported standard timings:
[ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.037] (II) fglrx(0): Supported detailed timing:
[ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.037] (II) fglrx(0): Monitor name: L1918S
[ 2633.037] (II) fglrx(0): Monitor name:
[ 2633.037] (II) fglrx(0): EDID (in hex):
[ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2633.037] (II) fglrx(0): Output DFP1 disconnected
[ 2633.037] (II) fglrx(0): Output DFP2 disconnected
[ 2633.037] (II) fglrx(0): Output DFP3 disconnected
[ 2633.037] (II) fglrx(0): Output DFP4 disconnected
[ 2633.037] (II) fglrx(0): Output DFP5 disconnected
[ 2633.038] (II) fglrx(0): Output DFP6 disconnected
[ 2633.038] (II) fglrx(0): Output DFP7 disconnected
[ 2633.038] (II) fglrx(0): Output CRT1 connected
[ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
[ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2633.038] (II) fglrx(0): DPI set to (96, 96)
[ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
[ 2633.038] (II) Loading sub module "ramdac"
[ 2633.038] (II) LoadModule: "ramdac"
[ 2633.038] (II) Module "ramdac" already built-in
[ 2633.038] (==) fglrx(0): NoDRI = NO
[ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
[ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2633.038] (==) fglrx(0): UseFastTLS=0
[ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2633.038] (--) Depth 24 pixmap format is 32 bpp
[ 2633.038] Loading extension ATIFGLRXDRI
[ 2633.038] (II) fglrx(0): doing swlDriScreenInit
[ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.039] ukiOpenDevice: open result is 14, (OK)
[ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
[ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
[ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
[ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2633.039] (II) fglrx(0): swlDriScreenInit done
[ 2633.039] (II) fglrx(0): Kernel Module Version Information:
[ 2633.039] (II) fglrx(0): Name: fglrx
[ 2633.039] (II) fglrx(0): Version: 14.10.2
[ 2633.039] (II) fglrx(0): Date: Apr 17 2014
[ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
[ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
[ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
[ 2633.040] (II) fglrx(0): DRI initialization successfull
[ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 2633.041] (==) fglrx(0): Backing store disabled
[ 2633.041] Loading extension FGLRXEXTENSION
[ 2633.041] (**) fglrx(0): DPMS enabled
[ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2633.041] (**) fglrx(0): Textured Video is enabled.
[ 2633.041] (II) LoadModule: "glesx"
[ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
[ 2633.043] Loading extension GLESX
[ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
[ 2633.043] (II) fglrx(0): GLESX is enabled
[ 2633.043] (II) LoadModule: "amdxmm"
[ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
[ 2633.055] Loading extension AMDXVOPL
[ 2633.055] Loading extension AMDXVBA
[ 2633.055] (II) fglrx(0): Enable composite support successfully
[ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
[ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
[ 2633.055] (II) fglrx(0): X context handle = 0x1
[ 2633.055] (II) fglrx(0): [DRI] installation complete
[ 2633.055] (==) fglrx(0): Silken mouse enabled
[ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2633.414] (--) RandR disabled
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.432] ukiOpenDevice: open result is 15, (OK)
[ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.443] ukiOpenDevice: open result is 16, (OK)
[ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiDynamicMajor: found major device number 250
[ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.446] ukiOpenDevice: open result is 16, (OK)
[ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
[ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.526] ukiOpenDevice: open result is 17, (OK)
[ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiDynamicMajor: found major device number 250
[ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.527] ukiOpenDevice: open result is 17, (OK)
[ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.546] (II) fglrx(0): OverDrive6 Detected!
[ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.594] (II) LoadModule: "evdev"
[ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
[ 2633.595] compiled for 1.14.3, module version = 2.8.2
[ 2633.595] Module class: X.Org XInput Driver
[ 2633.595] ABI class: X.Org XInput driver, version 19.1
[ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.595] (**) Power Button: always reports core events
[ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.595] (--) evdev: Power Button: Found keys
[ 2633.595] (II) evdev: Power Button: Configuring as keyboard
[ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2633.595] (**) Option "xkb_rules" "evdev"
[ 2633.595] (**) Option "xkb_model" "pc104"
[ 2633.595] (**) Option "xkb_layout" "us"
[ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.634] (**) Power Button: always reports core events
[ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.634] (--) evdev: Power Button: Found keys
[ 2633.634] (II) evdev: Power Button: Configuring as keyboard
[ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2633.634] (**) Option "xkb_rules" "evdev"
[ 2633.634] (**) Option "xkb_model" "pc104"
[ 2633.634] (**) Option "xkb_layout" "us"
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2633.635] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
[ 2633.639] (II) No input driver specified, ignoring this device.
[ 2633.639] (II) This device may have been added with another device file.
[ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
[ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2633.639] (**) Option "xkb_rules" "evdev"
[ 2633.639] (**) Option "xkb_model" "pc104"
[ 2633.639] (**) Option "xkb_layout" "us"
[ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2633.640] (II) No input driver specified, ignoring this device.
[ 2633.640] (II) This device may have been added with another device file.
[ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2639.300] (II) fglrx(0): Backup framebuffer data.
[ 2639.333] (II) fglrx(0): Backup complete.
[ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.732] (II) fglrx(0): Shutdown CMMQS
[ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
[ 2653.735] (EE)
[ 2653.740] (EE) Backtrace:
[ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
[ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
[ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
[ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
[ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
[ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
[ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
[ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
[ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
[ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
[ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
[ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
[ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
[ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
[ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
[ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
[ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
[ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
[ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
[ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
[ 2653.857] (EE)
[ 2653.861] (EE) Segmentation fault at address 0x0
[ 2653.866] (EE)
Fatal server error:
[ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2653.878] (EE)
[ 2653.883] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2653.904] (EE)
[ 2653.908] (EE) Server terminated with error (1). Closing log file.
xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
Thanks for your efforts.
Last edited by Mytrin (2014-05-25 19:09:02)I've managed to solve this error:
(EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
Last edited by Mytrin (2014-05-25 19:06:09) -
I have recently switched to Firefox from Google Chrome, and I am finding that I am unable to open any pdf files from the web in any way in Firefox. I cannot download them and open them in Adobe Reader, and I cannot preview them in Firefox, nor can I use the Adobe plugin. I have tried to use the solutions posed by users on this site, but none of them have worked. Any time I make a change to settings to try to solve this issue, the change never allows me to view the pdf file, and the setting reverts to the previous setting after the browser has been restarted. I don't care how I view the file, but I need to either be able to view it as a preview or I need to be able to download it.
I don't know if this is any help I have had a problem where the pdf files were not opening correctly which I think was the problem here. I spent hours of head scratching and have now found out what the problem is. Right click on the Adobe Reader Icon on the desktop. Select properties and then the compatibility tab. You will see the uppermost section in this screen is Compatibility mode. I have Windows 7 and mine was set to Windows XP. I changed that to Windows 7 and now the problem is resolved. In short use the above instructions to check you are using the right compatibility mode for the version of Windows you are using and your troubles should be over!!
-
Hello,
I installed a theme on OS X Lion that was actually made for snow leapor, because on a youtube video someone said it works with Lion too,
After installing it I got problems seeing close and minize icons.
And After reinstalling my Macbook pro, I am unable to open finder, Safari, Terminal etc.
I have tried to get help from several help forums, and tried changing files as described here
https://discussions.apple.com/thread/3256533?start=0&tstart=0
Theme was downloaded from here
http://www.fif7y.com/themes/sog/Okay, it's both for your first question: When I import the songs to the library, the songs are not in the correct order as they were on the CD. And, in the process of my importing the songs, the library scrambles the songs in different sections of the library (I explain further below)
I don't know what you mean by "little triangle" pointing up or down. What's that got to do with the price of fish in China? lol
When I get the music in the library the songs come out sorted this way: 2 songs from CD 1 appear one section of the library, then 1 song from CD 2 appears in the next column, along with the album work. Then, I go down farther, and there's a few more of the songs from CD 1 in the next section. I go down again, and maybe 2 or 3 songs are in that column. Along with the artwork for that CD. Then I scroll down again in the library, and there's maybe 3 or 4 songs from CD 1 there. Get the picture? It keeps sorting the songs in that order. And yes, the CDs I was importing were compliation dance CDs, along with some from the same artist, like Barry Manilow.
I hope I answered the questions better so that you can help me Thanks in advance, Glenn -
Unable to open files associated with Adobe Reader - program goes into a loop
i am unable to open any file associated with adobe reader or adobe pro. when i double-click the file, adobe reader opens up but it goes into a loop.
adobe reader opens, then a progress window opens, as if the file will open but adobe closes and opens again and the same cycle repeats itself until i manually close the program.
any advice?
update:
i can open regular .PDF files when i double-click the icon and i can also open .PDF files when i open adobe reader first and then choose open file. it's just the .FDF files that are the problem (so far).
the file in question happens to be an .FDF extension, which is an internet generated form. i attached a screen shot of the screen that pops up, goes away, and pops up again that creates the loop.
the white out section is the server name where the file was saved to. but i also get the same symptoms when i am in internet explorer, hit the generate form button.hey ankit,
sorry i didn't see a notification that you replied to this discussion.
"1. Generate a new PDF and a FDF file. Try opening the same and see if it behaves the same way."
yes, it does behave the same way, it's just a continuous loop until i have to kill the process.
"2. Check if you have access to the PDF that is being used by the particular FDF."
by this do you mean the correct permissions? if that is what you mean, then yes, the permissions are set correctly.
"3. If possible, please send me the FDF and the associated PDF that is behaving in this way on your system."
i really wish i could but the information in the form is sensitive and cannot be sent.
as an update though, i reimaged the customer's workstation, installed Adobe Reader 10.1.1 and it worked perfectly (finally). HOWEVER, after about two weeks the same symptoms returned! -
I am unable to open attachments (Word Documents, Excel file, Adobe) from my Gmail with Firefox.
I am unable to open attachments (Word Documents, Excel file, Adobe) from my Gmail with Firefox. My computer freezes when I try to open the (email attachment) file. Task Manager says "not responding".
You can respond to [email protected]You may first want to look into Safari's "Installed Plugins" section within the browser. This is (usually) found under the Safari Help header in the top of a browser. I say usually, because I don't use Safari often and mine is an older version. They handle applications and plugins like most others, to a point.
I see in Safari Installed Plugins that mine would use
application/pdf
Acrobat Portable Document Format
Acrobat Reader & reader plugin v9.5.5 for web browsers
(in Safari 5.x, where I looked into this)
While I use FireFox, SeaMonkey (Mozilla) and others, where I can choose in preferences the helper applications to open from the browser, Safari has different methods; so if you can change this in the preferences or settings of Safari in a later version I am not certain.
You could see what the defaults are by using Safari help menu to open the Installed plugins, and maybe find out what happend to Adobe reader plugin. Could be it was 'sandboxed' in a later OS X and needs to be installed differently to be accepted as safe.
It is easier to set how a file type is handled once it is inside the computer and not held in the browser; by file type in general or specific to each single document. I do both, and seldom let an a browser do these things due to security considerations. I download and open them, only then if I feel they are safe.
Sorry to not have a specific answer for that anomaly.
Good luck & happy computing! -
Unable to open /dev/agpgart - going to command line no GUI
I have tried both Xorg and Xsun in solaris 10 . Can anyone suggest me how to fix this problem. I am pasting Xsun.0.log here in. I have the same error in Xorg. I have installed patches 118966-15 and 120536-08. Log gives all of my environment info.
Here it goes:
(EE) screenInfo.numScreens = 1
(==) Log file: "/var/log/Xsun.0.log", Time: Tue Mar 21 12:37:31 2000
(WW) No supplemental Xorg Configuration file exists, use Solaris OWconfig file
(==) ServerLayout "SimpleLayout"
(**) |-->Screen "DefaultScreen 1" (0)
(**) | |-->Monitor "DefaultMonitor"
(**) | |-->Device "DefaultDevice"
(WW) No FontPath specified. Using compiled-in default.
(==) FontPath set to "/usr/openwin/lib/X11/fonts/Type1/,/usr/openwin/lib/X11/fonts/Type1/sun/,/usr/openwin/lib/X11/fonts/F3bitmaps/,/usr/openwin/lib/X11/fonts/Speedo/,/usr/openwin/lib/X11/fonts/misc/,/usr/openwin/lib/X11/fonts/75dpi/,/usr/openwin/lib/X11/fonts/100dpi/,/usr/openwin/lib/X11/fonts/TrueType"
(==) RgbPath set to "/usr/openwin/lib/X11/rgb"
(==) ModulePath set to "/usr/openwin/sfw/server//lib/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on solaris
(II) LoadModule: "pcidata"
(II) Loading /usr/openwin/sfw/server//lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7125 card 0e11,b165 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:05:0: chip 125d,1988 card 0e11,b19d rev 12 class 04,01,00 hdr 00
(II) PCI: 01:09:0: chip 1113,1211 card 1113,1211 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:0a:0: chip 134d,7897 card 134d,0001 rev 02 class 07,03,04 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[2] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[3] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0x40000000 - 0x400fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] rev 3, Mem @ 0x44000000/26, 0x40100000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x40000000 - 0x7fffffff (0x40000000) MX[B]E
[1] -1 0 0x40100000 - 0x4017ffff (0x80000) MX[B](B)
[2] -1 0 0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
[3] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[4] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[5] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[6] -1 0 0x0000eee0 - 0x0000eeff (0x20) IX[B]E
[7] -1 0 0x0000eec0 - 0x0000eeff (0x40) IX[B]E
[8] -1 0 0x00002020 - 0x0000203f (0x20) IX[B]E
(II) PCI Memory resource overlap reduced 0x40000000 from 0x7fffffff to 0x400fffff
(II) PCI I/O resource overlap reduced 0x0000eec0 from 0x0000eeff to 0x0000eedf
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x40000000 - 0x400fffff (0x100000) MX[B]E
[1] -1 0 0x40100000 - 0x4017ffff (0x80000) MX[B](B)
[2] -1 0 0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
[3] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[4] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[5] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[6] -1 0 0x0000eee0 - 0x0000eeff (0x20) IX[B]E
[7] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]E
[8] -1 0 0x00002020 - 0x0000203f (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x40000000 - 0x400fffff (0x100000) MX[B]E
[6] -1 0 0x40100000 - 0x4017ffff (0x80000) MX[B](B)
[7] -1 0 0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[11] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[13] -1 0 0x0000eee0 - 0x0000eeff (0x20) IX[B]E
[14] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]E
[15] -1 0 0x00002020 - 0x0000203f (0x20) IX[B]E
(II) LoadModule: "i810"
(II) Loading /usr/openwin/sfw/server//lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, 915GM
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810e found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x40000000 - 0x400fffff (0x100000) MX[B]E
[6] -1 0 0x40100000 - 0x4017ffff (0x80000) MX[B](B)
[7] -1 0 0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[11] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[12] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[13] -1 0 0x0000eee0 - 0x0000eeff (0x20) IX[B]E
[14] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]E
[15] -1 0 0x00002020 - 0x0000203f (0x20) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x40000000 - 0x400fffff (0x100000) MX[B]E
[6] -1 0 0x40100000 - 0x4017ffff (0x80000) MX[B](B)
[7] -1 0 0x44000000 - 0x47ffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[14] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[16] -1 0 0x0000eee0 - 0x0000eeff (0x20) IX[B]E
[17] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[B]E
[18] -1 0 0x00002020 - 0x0000203f (0x20) IX[B]E
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/openwin/sfw/server//lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 8, (--) framebuffer bpp 8
(==) I810(0): Default visual is PseudoColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/openwin/sfw/server//lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/openwin/sfw/server//lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/openwin/sfw/server//lib/modules/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 33.118
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/openwin/sfw/server//lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: CPQ Model: 3053 Serial#: 1110784050
(II) I810(0): Year: 2001 Week: 8
(II) I810(0): EDID Version: 1.2
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) I810(0): Sync: Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) I810(0): Gamma: 2.26
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.635 redY: 0.323 greenX: 0.283 greenY: 0.593
(II) I810(0): blueX: 0.146 blueY: 0.069 whiteX: 0.281 whiteY: 0.311
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) I810(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) I810(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) I810(0): Monitor name: COMPAQ FS740
(--) I810(0): Chipset: "i810e"
(--) I810(0): Linear framebuffer at 0x44000000
(--) I810(0): IO registers at addr 0x40100000
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) I810(0): AGP GART support is not available. Make sure your kernel has
agpgart support or that the agpgart kernel module is loaded.
(EE) PreInit done
(EE) Screen(s) found, but none have a usable configuration.
And finally GUI test will stop and i have to restart by doing power off. Your suggestion is appreciated.frits hoogland wrote:
I am not sure if mdadm --remove /dev/md0
[root@rac-1 ~]# mdadm --remove /dev/md0
[root@rac-1 ~]# mdadm --query /dev/md0
/dev/md0: is an md device which is not active
/dev/md0: No md super block found, not an md component.
[root@rac-1 ~]#
would work, try it to see if the device gets removed that way, otherwise remove it the blunt way:
rm -rf /dev/md0
[root@rac-1 ~]# rm -rf /dev/md0
[root@rac-1 ~]# mdadm --query /dev/md0
mdadm: cannot open /dev/md0: No such file or directory
[root@rac-1 ~]#
then it shouldn't give anymore troubles.
[root@rac-1 ~]# parted -l
Model: ATA SAMSUNG HD080HJ (scsi)
Disk /dev/sda: 80.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 32.2GB 32.2GB primary ntfs boot
2 32.2GB 80.0GB 47.8GB extended lba
5 32.2GB 64.7GB 32.5GB logical ntfs
6 64.7GB 64.8GB 107MB logical ext3
7 64.8GB 80.0GB 15.2GB logical ntfs
Model: ATA ST3160815AS (scsi)
Disk /dev/sdb: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 43.0GB 43.0GB primary ext3 boot
2 43.0GB 47.2GB 4294MB primary linux-swap
3 47.2GB 160GB 113GB extended lba
5 47.2GB 52.6GB 5371MB logical
6 52.6GB 58.0GB 5371MB logical
[root@rac-1 ~]# looks it worked.may i know why the other than rm did not work? -
How to find/erase books?No AudioBook Section anymore??
Hi,
I'm updated iTunes to 7.1.1(5) as of today.
Shouldn'ta oughta dunnit.
When I look at my iPod, I can see the separate AudioBook section at the same heirarchical level as Artists, Albums, Songs, Genres etc. and I can access all 12 audiobooks (they are .aa files, downloaded from audible.com)
When my iPod's connected to iTunes however, there is NO way to find these audiobooks anywhere... NOT in the music library, and there is NO AudioBooks section at the top heirarchical level in iTunes as older iTunes versions had. How the heck can I erase my books once they're read? What the __ is going on? Please help...
By the way, my iPod has the latest software, iTunes assured me.
Mac OS X (10.4.9)
iMac 24" 2.16 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM Mac OS X 10.4.9 Mac OS X (10.4.9)embarrassed, but hope this helps someone else...
I opened preferences and found under general the appropriate box to check, et, voilà... there was my Audiobooks section back again. Must have gotten unchecked by something in the update.
Thanks, me, I've been a real help -
Unable to open files properly.
I have been giving Premiere CS5.5 a go recently. It's something I want to make use of for a living so I got myself one of the classroom in a books for the software. I'm aware it's for CS5 rather than .5 but I'm trying.
Anyway I'm just starting with the lessons. I've created the lesson folder like the book wants me to. However I'm running into a problem that is stopping me from progressing:
When I open the Lesson 1 file, I am prompted that "This project was saved from a previous version of Adobe Premiere Pro and must be converted"
So I continue and I don't know where I'm meant to be going. While the book tells me I may be prompted to tell adobe Premiere Pro where the file is in the lessons/assets folder, I don't know if this is the same prompt. Either way the software keeps crashing when I'm unable to complete this section. I don't really know what I'm meant to be doing. Any help would be appreciated.Can do
Model Name: MacBook Pro
Model Identifier: MacBookPro8,3
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB
The assets folder is located in Documents\Adobe\Premiere Pro\5.0\Lessons\Assets. When I go into Assets to try and use that, all files and resources are greyed out, stopping me from trying it. Furthermore I've reinstalled Premiere so I can try and see if that's fixed the crashing later on.
EDIT: The software crashed again. This happens after I attempt to open lesson 1 from the criab and then have to click cancel because I can't find/don't know which of the files/assets is required to fix the prompt. -
Unable to open my ipad icloud wont accept my password
Unable to open ipad as icloud won't accept my password.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
UNABLE TO OPEN FCP 6.02 PROJECT FILES AFTER INSTALLING LEOPARD!
**Unable to open FCP 6.02 project files after installing Leopard**. Tested and found that the files can be opened on another computer with OS 10.4.10, but not OS 10.5. Spoke to apple support many times, and have tried reinstalling FCP, but it didn't work.
Apple is now saying to erase my HD and reinstall from scratch. This presents a problem since i have software installed but no disc due to a move, (they are deep in offsite storage).
Anyone have this problem? Anyone know a fix?Lynne,
There is a section in the manual on the migration tool... I don't have my machine fired up right now so can't direct you to the exact page. I think a search for migration or migrate should do it.
Two other things to try:
1. There have been numerous reports that Quicktime 7.3 is what is killing older projects. According to one of the third party program makers Apple re-wrote Quicktime changing the null value to Zero from minus-one. I'm not a code junkie so can't vouch for this but the upshot would be, go back to Quicktime 7.1 or 7.2 not 7.3
2. There is a Quicktime plugin called "Perian". For lots of people it has caused numerous problems.
Look for Perian on your machine and if you find it, drag the app to the trash... re boot and try again.
Of course the ultimate solution would be to reinstall Tiger, Final Cut Studio 2 and Quicktime 7.2. So far the most stable combined setup for me and lots of others on G5 machines.
36 degrees and thunderstorms with sleet here this afternoon. The door on my storage unit is staying closed.
Message was edited by: John Criswell -
ASO Custom Calc -Error-1241109 :Unable to open file
Hi,
I am trying to implement ASO custom Calc in version 11.1.2.1 ,using following Version DataCopy script in Maxl Editor
In POV i have included 1 set of base level member from each dimension just for testing purpose.
TestScript.csc Content : [Final] := [Working_0] ;
execute calculation on database 'EFXBASE'.'EFXBASE' with
local script_file "/Oracle/Middleware/user_projects/achd1rka001/EssbaseServer/essbaseserver1/app/EFXBASE/EFXBASE/TestScript.csc"
POV
"Crossjoin({[FXEXP]},Crossjoin({[Jan]},Crossjoin({[FY06]},Crossjoin({[CH_None]},Crossjoin({[PJ_None]},Crossjoin({[PD_None]},Crossjoin({[CC_0300]},
Crossjoin({[0004]},Crossjoin({[CurrFcst]},Crossjoin({[Local]},Crossjoin({[ICP_None]},{[LSTB]})))))))))))"
SourceRegion
"[Working_0]" ;
I am getting following error on execution of above script
Unable to open file ['/Oracle/Middleware/user_projects/achd1rka001/EssbaseServer/essbaseserver1/app/EFXBASE/EFXBASE/TestScript.csc']
Custom Calculation terminated with Essbase error 1241109
what could be the reason .. I have tried using '//' or '\' in file path but still getting same error.Can you post your script. (change " to ' in POV and SourceRegion section)
Regards
Celvin
http://www.orahyplabs.com
*Please mark the responses as helpful/correct if applicable* -
GNOME in failsafe and unable to open new windows
Hello,
Since yesterday, I have many crash in GNOME Shell. The display goes in a kind of failsafe mode (very simple graphics and effects) after some time and I am quickly enable to open new windows after the start of gdm.
I'd have posted a screenshot but I'm not able to do it.
When I try to open a new window in a terminal it fails, seems like an error with the display
$ epiphany
No protocol specified
Failed to parse arguments: Cannot open display:
$ echo $DISPLAY
:0
$ import MyScreenshot.png
No protocol specified
import: unable to open X server `:0' @ error/import.c/ImportImageCommand/368.
I have the Xorg or opened windows process which take way too much CPU than the usual. For example Firefox easily blocks during a few minutes and I have errors related to a script in an extension which does not run.
Here is my ~/.xsession-errors file
I have not made any configuration change lately except the usual updates. I have to restart GDM each time it happens.
Any idea what is causing that ?
Thank you
Last edited by martvefun (2012-07-01 20:13:35)You mean the graphical card ? I have a nVidia GeForce 8400M GS.
I just noticed I don't have a xorg.conf anymore, just in /etc/X11/xorg.conf.d/ 3 files with nothing related to the screen
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "fr"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Last edited by martvefun (2012-07-02 14:41:22)
Maybe you are looking for
-
Scheuled report failing intermittently With Permission Error
Hello, A scheduled custom report fails some days. The user has permission to both run and schedule the report. There is no problem to view the reports neither to set up the schedule. And the schedule often runs ok, just every now and then it fails wi
-
Error On Attach File in Apex 4.0.2 And Oracle database 10.2.3.0
hi all i using Apex 4.0.2 and Oracle database 10.2.0.3 i have Blob Item in table and i wanted upload a file to Blob Item . when i used Attach file button at the first saving connection failed and the second time successfully How can i Fixed this prob
-
Sql count function in order by clause
Post Author: krypton CA Forum: Data Connectivity and SQL Hi Guys Can i ask a quick question. I am trying to retrieve data remotely from a SQL Server via crystal reports. Within the Database Expert I have entered a SQL query to retrive the number of (
-
Seem to have lost Dropbox as an email attachment option
I recently upgraded from a Z1 running 4.4.4 to a Z3, also running 4.4.4. Prior to upgrading, with my Z1, I could attach documents from Dropbox to emails from within the email app. I simply hit the paperclip and included in the list of file location
-
Boot Camp after Yosemite, Can't boot
Like others, I can't boot to Windows 7 after Yosemite install. I've followed a couple of Loner T's posts, but I haven't gotten it working yet. What's a good starting point to