Unable to perform SP 2010 SP2 to SP 2013 SP1 Upgrade using Mount-SPContentDatabase content db -DatabaseServer dbserver -WebApplication web app

We have performed our upgrade process successfully 4 times prior without issue but now we can not seem to get past this issue:
When we run this command Upgrade using Mount-SPContentDatabase STS_Content_TFS -DatabaseServer <> -WebApplication <>, we receive this error:
There is a compatibility range mismatch between the Web server and database "", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility
range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
We have tried services restarts, reboots, re-applying app poll and service accounts and even re-image of vm and nothing seems to work
We have also tried to run PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures and are now getting Cannot open SPTimerV4 service on computer.
Hope someone can help, we are running out of things to try to resolve this.
Many Thanks
Kim Bates

Hi Kim,
I recommend to check if the server farm account password has expired or was changed, update the server farm account password. Then, try to upgrade the server farm again.
To update the server farm account password, type the following command at an elevated command prompt and then press ENTER:
Stsadm -o updatefarmcredentials -userlogin domain\username -password password
In addition to that, you can also clear the config cache location for timer service from the below location:
%ALLUSERSPROFILE%\Application Data\Microsoft\SharePoint\Config
For the detailed information about how to clear the config cache, check out the following article:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
More references:
http://support.microsoft.com/kb/981487
http://blogs.technet.com/b/sharepointwarrior/archive/2012/12/07/sp-2010-psconfig-fails-with-missing-security-updates-that-are-actually-installed.aspx
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration

Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1722
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 323
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1237
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 313
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 311
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 318
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 53361   StoreEc: 0x977
    Lid: 51859
    Lid: 33649   StoreEc: 0x977
    Lid: 43315
    Lid: 58225   StoreEc: 0x977
    Lid: 39912   StoreEc: 0x977
    Lid: 54129   StoreEc: 0x977
    Lid: 50519
    Lid: 59735   StoreEc: 0x977
    Lid: 59199
    Lid: 27356   StoreEc: 0x977
    Lid: 65279
    Lid: 52465   StoreEc: 0x977
    Lid: 60065
    Lid: 33777   StoreEc: 0x977
    Lid: 59805
    Lid: 52487   StoreEc: 0x977
    Lid: 19778
    Lid: 27970   StoreEc: 0x977
    Lid: 17730
    Lid: 25922   StoreEc: 0x977
    + CategoryInfo          : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
   0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName        : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!

Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Unable to perform "insert into table select ...." using DBF_JDBC30

below i post my code :
import java.util.*;
import java.sql.*;
import java.io.*;
import com.hxtt.sql.*;
public class backofficeDbfVerification {
public backofficeDbfVerification(String path) throws SQLException {
Properties prop = new Properties();
prop.setProperty("user", "");
prop.setProperty("OtherExtensions","true");
prop.setProperty("Version Number", "03");
try {
Class.forName("com.hxtt.sql.dbf.DBFDriver").newInstance();
connection = DriverManager.getConnection("jdbc:DBF:/"+path, prop);
catch (ClassNotFoundException classnotfoundexception) {
System.out.println("could ot find HXTT class, make sure the classpath have been defined in your system !");
catch(Exception e) {
System.out.println(e.getMessage());
public void createBadRecord(String table, String newtable, int blth) throws SQLException {
Statement stmt = connection.createStatement();
String insert = "insert into \""+newtable+"\" select * from \""+table+"\"";
boolean bInsert = stmt.execute(insert);
stmt.close();
public static void main (String args[]) {
String path = "C:\\MASTER\\SOURCEDATA\\AREA";
try {
backofficeDbfVerification test = new backofficeDbfVerification(path);
test.createBadRecord("source\\area\\123.AA2","source\\area\\others\\89964568.AA1");
catch(SQLException sqx) {
System.out.println("Error "+sqx.getMessage());
i try to perform simple query : insert into tablea select from tableb which has same structure. the source table has only 9 rows, but the process ran very long time, no error message raised,it just run and never end (which make me upset for the whole day).
i have tried another simple query : insert into table1 values (1,2) using the same driver and execute successfully.
is it becoz of function limitation since i used evaluation copy ?

Copy the answer from HXTT's support forum:
No function limitation. I just tested:
create table testa1 select * from test;
insert into testa1 select * from test;
Passed.
I also run your backofficeDbfVerification.java sample. Passed too. I'm using the same code as you. The difference is only my 89964568.AA1 and 123.AA2 is simulative tables files. If possible, please zip your 89964568.AA1 and 123.AA2 and email to [email protected] Thanks.
BTW, I pasted the little modified backofficeDbfVerification.java below:
import java.sql.*;
import java.util.*;
public class backofficeDbfVerification {
Connection connection;
public backofficeDbfVerification(String path) throws SQLException {
Properties prop = new Properties();
prop.setProperty("user", "");
prop.setProperty("OtherExtensions", "true");
prop.setProperty("Version Number", "03");
try {
Class.forName("com.hxtt.sql.dbf.DBFDriver").newInstance();
connection = DriverManager.getConnection("jdbc:DBF:/" + path, prop);
catch (ClassNotFoundException classnotfoundexception) {
System.out.println("could ot find HXTT class, make sure the classpath have been defined in your system !");
catch (Exception e) {
System.out.println(e.getMessage());
public void createBadRecord(String table, String newtable) throws
SQLException {
Statement stmt = connection.createStatement();
String insert = "insert into \"" + newtable + "\" select * from \"" +
table + "\"";
boolean bInsert = stmt.execute(insert);
stmt.close();
public static void main(String args[]) {
String path = "f:\\dbffiles";
try {
backofficeDbfVerification test = new backofficeDbfVerification(path);
test.createBadRecord("source\\area\\123.AA2",
"source\\area\\others\\89964568.AA1");
catch (SQLException sqx) {
System.out.println("Error " + sqx.getMessage());
}

Unable to configure Approval 2010 workflow in SP 2013

I have istalled 2013 enterprise edition in the server and tried to set up a simple approval workflow --> add workflow-->
Approval workflow 2010--> Name --> option when the item is created and modified and click on Next...
Next screen it is showing infopath form template are not available...
I have installed Office 2013 in the server as well to check the same.
Correlation ID:e168a79c-db39-60da-7f1a-55503765a5bc
Please let me know if any one came across this scenario..
Regards,
Selva

Hi Selva,
According to your description, my understanding is that the InfoPath form template for Approval workflow is missing in your SharePoint 2013.
For your issue, you can check whether the form templates are available in your SharePoint farm.
Please go to Central Administration -> General Application Settings -> InfoPath Forms Services -> Manage Form Templates, make sure the Workflow form templates are existing and activated.
For more information, you can refer to the thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3dc710e1-1f60-4107-af2a-ded9276c683b/default-workflow-form-templates-have-disappeard
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Exchange 2003 sp2 to exchange 2007 sp1 upgrade error

Hi,
We had Windows 2003 DCs and Exchange 2003 servers. We migrated AD DCs to windows 2008 R2 at parent domain.
We have one parent domain and 10 child domains in remote sites .3 remote sites have been migrated to windows 2008 R2.
Now at parent domain I am trying to install exchange 2007 SP1 on a server with windows 2008 R2 SP1. I am facing certain issues:
1. When I run setup /PrepareSchema on this new exchange server , the organization check fails with error stating that : cannot find at least one DC running windows 2003 SP1 or later in DC=xyx,DC=com. This could be the result of moving DC objects in AD. Check
that at least one DC running windows server 2003 SP1 or later is located in the "Domian Controllers" OU and rerun setup".
2. When I try to install exchange server 2007 , I get the following error
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported
by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
Can any one shed light on this issue.
Regards
Syed
sa

You cannot install Exchange 2007 SP1 on Windows 2008 R2 SP1 as it is unsupported.
Only version of Exchange 2007 supported when OS is Windows 2008 R2 or R2 SP1 is Exchange 2007 SP3.
Where are you installing Exchange ? child or parent domain ?
2. When I try to install exchange server 2007 , I get the following error "Object
cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.".
Above error indicates that Exchange setup is trying to modify
a version of an object which might have been created when organization is prepared for Exchange 2010. don't you have exchange 2010 Servers already in your environment ?
Please give more information about your current email infrastructure
and whether if you are installing exchange on parent or child domain?
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Can you use Forefront protection 2010 on a Exchange 2013 sp1 on-premises server?

Is it possible?
What are the alternatives if we exclude Exchange online protection?
Does this mean if you migrate from exchange 2010 to exchange 2013 you have "thrown your money away" for purchising forefront solution? Are there any "upgrade" forefront less-cost solution from 2010 to alternative versions?
with best regards,
bostjanc

Hi,
The following KB lists the supported Exchange Server versions.
http://technet.microsoft.com/en-us/library/ff921059.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT2638 I am using OSX 10.8.5 with iPhoto 11. I have damaged my iPhoto library and am unable to open up my library with iPhoto. When I use 'open package contents' with the library, I can see that all my photos are there. Can I rebuild the events?

I have tried the option + command button while opening iPhoto but this has not helped.

Your next step would be tp try rebuild with iPhoto Library Manager and its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Issues connecting to SSRS 2012 SP2 through SharePoint 2013 SP1 Central Admin

When trying to open "system settings" for the SSRS Service application in Central Admin, I get the error "The remote server returned an error: (500) Internal Server Error."
Also, when trying to create a new Report Builder Report within SharePoint, I get an error "403 Forbidden".
The ULS log entry for this is:
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.ProtocolException: The content type text/html of the response message does not
match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML
1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title> <style type="text/css">  </style> </head> <body>
<div id="header"><h1>Server Error</h1></div> <div id="content"> <div class="content-container"><fieldset> '. ---> System.Net.WebException: The remote server
returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
at Microsoft.ReportingServices.SharePoint.SharedServiceProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Any ideas on what might be the issue would be greatly appreciated.

Hi Joshua.Arenz,
As per my understanding, you configured SSRS 2012 of SharePoint mode, when you click system setting in Central Admin, you got the error message.
According to the error message, the Reporting Services service application is not configured correctly. Please make sure you created service application correctly by following steps:
In SharePoint Central Administration, in the Application Management group, click Manage Service Applications.
In the SharePoint toolbar, click the New button.
In the New menu, click SQL Server Reporting Services Service Application.
In the Create SQL Server Reporting Services Service Application page, enter a name for the application.
In Application Pool section, create a new application pool for the application (recommended). Then select or create a managed account for the application pool.
In the Database Server, you can use the current server or choose a different SQL Server.
In Database Name the default value is ReportingService_<guid>, which is a unique database name. If you type a new value, type a unique value.
In Database Authentication, the default is Windows Authentication.
In the Web Application Association section, select the Web Application to be provisioned for access by the current Reporting Services Service Application.
Click OK.
For more information about Creating a new Reporting Services Service Application, please refer to the following document:
http://niftit.com/how-to-install-configure-reporting-services-sharepoint-2013/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Office Web Apps returns "unable to open"

We have SharePoint 2013 with Office Web Apps 2013 SP1.
Recently, users started receiving errors after the "Word Web App" logo would present stating "unable to open". This occurred on anything (Excel Web App, etc..).
Observed the following Event on my Office Web Apps server in the Applications and Services Logs, Microsoft Office Web Apps Log
Log Name:      Microsoft Office Web Apps
Source:        Office Web Apps
Date:          4/9/2015 8:24:24 AM
Event ID:      8115
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      FQDN_WebAppsServerName
Description:
Could not contact WOPI End Point. Error details - 'FileNotFound url - <a href="https:///highschool/CUA/_vti_bin/wopi.ashx/files/f0b744b0a509477fad71b5c1c94891b2?access_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjhCalNDdmJxVU9HNmc1bjN3SmJNeTVMV0dzcyJ9%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%2EN2jimetPSQcG%5Fl%5FdZR98KJUrlTXJLlGxvMoYGxNu2pGLr%2DWsv2Ir7%2DV3R0RHROUr8wqhSBSvX63qgEJF6thk7ODRv3hOp8SoMrM8PM08vhbaXVb15GTbSoQIC%2D1xnp4QAcVaLlIUpWRHnL5zNOno%5FRoqxmIa8uRGi24neCGUqAn6lne3kQHfzxneVwAR8U%5FvjYlgk2dA%5FzUaU0jB3DqQTfW5xjO0T2E0e42WNcuVCTLs0SYbtNXz5uljXtRQrtZKJl4%2DIWkgQgk1y7dLxS%2DvBTgTLrEBX9qJcJxqFX%2DEh6Ojk4yEURtAa581z0rWCBRPnRdHjwMU7iT4AT1BFsPLzA&access_token_ttl=1428618255865'">https://<fqdn_Sharepoint_ServerName>/highschool/CUA/_vti_bin/wopi.ashx/files/f0b744b0a509477fad71b5c1c94891b2?access_token=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IjhCalNDdmJxVU9HNmc1bjN3SmJNeTVMV0dzcyJ9%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%2EN2jimetPSQcG%5Fl%5FdZR98KJUrlTXJLlGxvMoYGxNu2pGLr%2DWsv2Ir7%2DV3R0RHROUr8wqhSBSvX63qgEJF6thk7ODRv3hOp8SoMrM8PM08vhbaXVb15GTbSoQIC%2D1xnp4QAcVaLlIUpWRHnL5zNOno%5FRoqxmIa8uRGi24neCGUqAn6lne3kQHfzxneVwAR8U%5FvjYlgk2dA%5FzUaU0jB3DqQTfW5xjO0T2E0e42WNcuVCTLs0SYbtNXz5uljXtRQrtZKJl4%2DIWkgQgk1y7dLxS%2DvBTgTLrEBX9qJcJxqFX%2DEh6Ojk4yEURtAa581z0rWCBRPnRdHjwMU7iT4AT1BFsPLzA&access_token_ttl=1428618255865'.
I ran Update-SPWOPIProofKey on the SharePoint Server; and it has seemed to fix it.
Trying to recall past events; in January we installed the latest Web Apps updates; and while troubleshooting this issue; I did as well; install the most recent Web Apps updates KB2956158.
We use the Remove-OfficeWebAppsMachine and subsequently New-OfficeWebAppsFarm each time we apply the updates. Our environment is stand-alone. One Exchange Server, One SharePoint Server, One Office Web Apps Server.
Any insight is appreciated.
Technology Administrator Erie County (Career and) Technical School.

Hi,
From your description, my understanding is that you got an error when you opened documents.
Please install Microsoft .NET Framework 4.5.2, compare the result.
More information, please refer to the link:
http://blogs.technet.com/b/justin_gao/archive/2014/12/19/troubleshooting-error-event-id-8115-when-you-install-office-web-apps-server-2013-on-windows-server-2012-r2.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM

Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DK

Hello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help!

Project Server 2010 SP2 Timesheet Errors

Hi,
We use Project Server 2010, SP2 in SEM mode. Users use IE9. Some of our users complaining that while entering timesheet, sometimes "h" for hours is auto populated next to the hours entered in the cell... and sometimes dont appear and then timesheet
freezes. Anyone have any suggestions when would this happen and any resolutions?
And some users also get the following error...
An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet"
Please suggest.
Kishore Dodda

Let us know what turns up. It certainly looks like you are losing connectivity. The other possibility is that your databases are in need of attention. Ask your SQL DBAs whether they are following best practices for Database management and have a SQL maintenance
plan running on the Project Server databases.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Outlook 2010 SP2 - Error when editing shared calendar: Post Exchange 2013 CU2 Migration

Hi there,
I have a strange comportment with Outlook 2010 SP2 and Exchange 2013 CU2 and i really need your help.
Frequently, when an user (who has the good permissions for) want to edit a shared calendar (edit a meeting or add one), he has this error message:
" Cannot display the folder. Your server administrator has limited the number of items you can open simultaneously. Try closing message you have opened or removing attachments and images from unsent messages you are composing "
I see anything in the Exchange server event log but i have each time, an error message in the client event log:
" Microsoft Office14 Alerts ID 300"
Everything work very well with Outlook 2013.
Many thanks in advance for your assistance, and I am looking forward to reading from you.

Hi,
According to your description, the issue is related to your Office 2010 client.
And the issue can be resolved by installing the Microsoft Office 2010 Deployment Kit.
Here are the steps you can refer to :
1. Open a command prompt with administrative permissions.
2. Browse to the directory that contains the Offvirt.msi.
3. At the command prompt, run the following command:
msiexec /i OffVirt.msi [licensing flags]
You must enter a correct licensing flag in the following list to correctly configure the Deployment Kit. Otherwise, functionality may be incorrect.
For more information, you can refer to the following article:
http://blogs.technet.com/b/virtualworld/archive/2010/07/07/microsoft-has-encountered-an-error-with-licensing-and-will-need-to-close.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela
Angela Shi
TechNet Community Support

Unable to create web app with PowerShell - An update conflict has occurred

I am trying to create a new Web Application using PowerShell. I need to use PowerShell because I need to create the Web App using classic authentication and not Claims authentication. the first time I created the Web App, everything went great. Ever since
the first time, I get an error and the web app creation does not complete. Just as an FYI, I can create a new Web App using Central Admin, but that creates it with Claims authentication which I cannot use.
Here is my PowerShell script
New-SPWebApplication -Name "SharePoint2013 (82)" -ApplicationPool "SharePoint2013-82" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "GLOBAL\SP_AppPool") -Port 82 -URL "http://sharepoint2013"
Here is the error I get in PowerShell
New-SPWebApplication : An update conflict has occurred, and you must re-try this action. The object SPWebApplication
Name=SharePoint2013 (82) was updated by DOMAIN\SP_Administrator, in the powershell (13020) process, on machine SPWEB01.
View the tracing log for more information about the conflict.
At line:1 char:1
+ New-SPWebApplication -Name "SharePoint2013 (82)" -ApplicationPool "SharePoint201 ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...PWebApplication:SPCmdletNewSPWebApplication) [New-SPWebA
pplication], SPUpdatedConcurrencyException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPWebApplicationUnknown SQL Exception 547 occurred. Additional error information from SQL Server is included below.
The DELETE statement conflicted with the REFERENCE constraint "FK_Dependencies1_Objects". The conflict occurred in database "SP_Config", table "dbo.Dependencies", column 'ObjectId'.
The statement has been terminated.
I also get this error from the trace
Unknown SQL Exception 547 occurred. Additional error information from SQL Server is included below.
The DELETE statement conflicted with the REFERENCE constraint "FK_Dependencies1_Objects". The conflict occurred in database "SP_Config", table "dbo.Dependencies", column 'ObjectId'.
The statement has been terminated.
I have tried to resolve the issue by performing the following:
Delete the partially created web app using Central Admin or PowerShell
Clear the file system cache on all servers in the farm (Stopping wss timer job, Saving Copy of the
cache.ini file from C:\Documents and Settings\All Users\application data\Microsoft\SharePoint\Config folder. Clearing all the .xml files from the location except cache.ini but Edit the cache.ini to have value 1. Starting the timer job)
Use Products Configuration Wizard (no detach, just 'upgrade') - People have said to select the option to disconnect the server from server farm and revert back again at next step (so you actually do not disconnect), but there is no next step that I have
encountered. You select 'disconnect', hit next, and the server disconnects.
Restart all the servers in the farm
Run the PowerShell script again...still get the same error
I have tried it on multiple servers in the farm too.

Hi Michael,
I found a similar thread for you reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9ccef7bf-87a9-4849-b086-4db2d898f1d7/cannot-create-new-web-application-wss-30?forum=sharepointadminlegacy
If it doesn’t work, sometimes the issue might be caused by long time keep powershell opening and generating some cache files. So please try re-opening the powershell and test the issue again.
http://blogs.msdn.com/b/ronalg/archive/2011/06/24/mount-spcontentdatabase-errors-on-2nd-and-subsequent-attempts-of-same-database.aspx?Redirected=true
http://www.oakwoodinsights.com/sharepoint-powershell-surprise/
In addition, here is an article which explains the possible reason of the SQL error:
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Migrate Sharepoint Foundation 2010 to Sharepoint Foundation 2013

Hello,
I wonder if there is any way to migrate the site collection from Sharepoint Foundation 2010 to Sharepoint Foundation 2013 SP1?
thanks in advance:
szabszi

Hi szabszi,
The native SharePoint DB Attach Upgrade Method does allow you to pick and choose which site collections to upgrade after the DB has been attached (http://social.technet.microsoft.com/wiki/contents/articles/25125.sharepoint-2013-powershell-to-copy-or-update-list-items-across-sharepoint-sites-and-farms.aspx
There are also other software vendors that provide more robust migration options. My company, AvePoint, is one of them. You can use the url in my signature to visit our site.
Please Mark Answered if my reply solves your problem. Thanks!
Jeff Thai
Technical Solutions Architect, AvePoint
http://www.AvePoint.com

Cannot save any changes - Microsoft Forefront 2010 for exchange is unable to perform the requested function

HI, I have Forefront 2010 for Exchange installed for an Exchange 2007 SP2 running on Windows 2003 x64 SP2. Exchange has all roles installed on the same server.
When I try to save any change on Forefront I got the following message:
Microsoft Forefront 2010 for Exchange is unable to perform the requested function. This may be because Forefront services are unavailable. Ensure that all Microsoft Forefront services are running and that WindowsPower Shell is functional
Well, our FF services are running and PowerShell is functional. I checked some forums and found some problems when there is entries in the IP Allow / Block lists in Exchange UI. I removed those entries but problem remains.
Any ideas would be appreciated.
Xavier Villafuerte

In my case, I was able to work around this issue by using PowerShell directly. For example, to run an on-demand scan for all mailboxes, this worked:
#open EMS
$aliases = (get-mailbox -result unlimited).alias
Add-PsSnapin FSSPSSnapin
set-FseOnDemandScan -MailboxList $aliases
Start-FseOnDemandScan -EnableVirusScan $true
Windows 2008 R2 SP1
Exchange 2010 SP3, RU9
PowerShell 4.0 present on the machine (though EMS runs PS 2.0)
Forefront PowerShell cmdlets:
https://technet.microsoft.com/en-us/library/cc482986.aspx
Mike Crowley | MVP
My Blog --
Baseline Technologies

Unable to perform SP 2010 SP2 to SP 2013 SP1 Upgrade using Mount-SPContentDatabase content db -DatabaseServer dbserver -WebApplication web app

Similar Messages

Maybe you are looking for