Unable to Print a .pdf less than 100% size

I used to be able to print out the address book at 75% or 80% to make a smaller booklet.  Now it prints at 100% no matter what percent is entered.

Thanks.  That used to work on my Intel Mini.  I have OSX 10.6.8 on a MacBook and on an Intel Mini.  Both ignore any percentage I enter.  It just prints full size 8x10 pages.  Maybe there's something in Preferences somewhere, but I can't find it.  Or maybe a newer OSX update messed it up.

Similar Messages

  • P 3005 less than 100 pages message

    Our P 3005 got a new printer cartridge but the display still says " less than 100 pages"
    Is there a reset button or what should I do.
    Thanks

    @Markus4235 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • I am having trouble sending bulk emails (less than 100 at a time) on my gmail account using group names created from my address book.  I use Mail on my I-Mac.  When I try to send out a bulk email, the message shows up that my server can't send them, etc.

    I am having trouble sending bulk emails from a Mail Group (less than 100 at a time) on my gmail account.  They come back saying the server can't recognize the data and try again with selected server or try later or edit message, all of which I have attempted a number of times, including re-booting the computer.  I am wondering if there is something wrong in my Address Book?  I have check Apple Preferences, and Mail Preferences and all seems in order.  I can send to any of the individual addresses, but not in a group.
    Thanks for your help.

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected

    I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected - I have uploaded the latest version of Adobe with no luck and have never had this issue before !

    Hi bengaunt ,
    Thank you for posting on the Adobe forums, you can try printing as an image.
    Open the file>Print>advanced>check the box "print as an image" OK
    Thanks,
    Vikrantt Singh

  • Unable to print to pdf from any of my applications

    Hello,
    I am running Acrobat 8.0 on windows 7. Toshiba Qosmio 64 bit. I am unable to print to pdf from any of my applications. Office, Mozilla, Lotus 1-2-3 and others. When I choose the print option. And from the drop down menu choose Adobe PDF as the printer. And when I click to continue I get the little metered bar showing it's working, but then I get an error in the printer que. I don't even get an option what to save it as or where to save it to. It just goes straight to the metered bar showing its working. And it does this for all my programs where I can print to pdf. Can anyone help me? Also, this is a student version. Could the student version be unable to do this?
    Thank you,
    JimmyJoney

    Although Acrobat 8 is not supported on Win 7, you can try a few things. First, apply all updates to Acrobat 8. If this doesn't help, check to make sure that the PDF port was created. If not, you can try:
    Open Control Panel, select Printers
    * Click Add a Printer
    * Click Add a local printer
    * Select Use an existing port (should be preselected), change the port to "Desktop \*.pdf (Adobe PDF Port), click Next
    * On the next page, click Have Disk...
    * Click Browse and browse to C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF (or wherever you have Acrobat installed), click OK.
    * It should now show a series of "Adobe PDF Converter" entries. Select the first one and click Next
    * Change the printer name if desired, uncheck the box to use it as a default printer, click Next
    * Do not print a test page, click Finish
    * Find your new printer in Printers. Right click on it and select Properties, Advanced
    * Click "Print directly to the printer", click OK
    These last steps are detailed in the following discussion.

  • Unable to print a pdf document

    I have an HP Officejet 4315 All-in-One Printer and have been unable to print an pdf document.  I have Adobe X installed.
    How can I get the print to work on pdf documents?

    How are you trying to print to pdf?
    Don't go via PostScript or Acrobat Distiller, which are old deprecated technology.
    You use:
    Menu > File > Print > PDF (button bottom left) > Save as PDF…
    Peter

  • Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

    Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

    Hi,
    Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
    Thanks,
    Shakti K

  • Unable to print to pdf from a pdf

    We're having a issue where we're unable to print to pdf from a pdf with acrobat 9 std, so far a 64bit machine. We get the following errors
    "the document could not be printed"
    "there were no pages selected to print"
    We see the issue with all pdfs. Acrobat 7 std works fine, as does printing to pdf from other applications with 9 std. So far it only effects acrobat 9 std. We've repaired the installation and updated to the latest. We do have however only see this with one machine, but we haven't looked past this one machine yet...Any ideas?
    thanks all,
    cg

    XP pro 64bit. Just updated to 9.3.3, still have the error being thrown.
    The user fills in a form from our intranet and then prints it with the adobe printer creating the illusion that its write protected. I'm not one to stop them, given the forms are low value and all. Possibly if the process is uncomplicated (that's key here) then saving the document to the desktop and making the change and write protecting it there before transmittal might be an alternative, as long as it doesn't rely on passwords and keys...
    Sorry I'm an adobe noob.
    thanks,
    cg

  • Thick, horizontal lines appear in both source and program viewer footage set to less than 100% ...

    Can anyone help?
    This has suddenly started across all projects, including those I have been working on for ages with no issues.  Everything else seems to be exactly the same as ever in every other application, only PP is affected.  The footage is all progressive (I rarely encounter interlaced nowadays), prores HQ 25fps, usually 1080 but also 720.  Output to the monitor, via MXO2 mini is fine and has not changed at all.  I can't think of any updates recently, certainly not in the past week, when this started.
    It's really wierd and clearly wrong, but I can't begin to work out how to fix it, having exhausted all my standard fixes (settings in app, OS, hardware etc all checked and rechecked.  Reboots done - all to no effect).
    My system is:
    MacPro 5,1 6-core 3.33GHz
    12GB RAM
    GTX285 Mac GPU - CUDA 5.0.45, GPU driver 1.3.4.0 (295.00.05f03)
    OSX 10.7.5
    PP CS 6.0.2
    MXO2 mini - latest drivers etc
    Any thoughts, much appreciated!
    Thanks
    Dominic

    Well, I seem to have fixed it but none the wiser for why I had this problem.
    Fixed it by upgrading my OS to OSX 10.8.3 (always a nerve trembling experience), after cloning my boot drive etc.  Then I updated CUDA to the latest version, reinstalled my Matrox drivers and crossed my fingers!  Happily, everything seems to be fine now.  I can only think that the problem was, maybe, something to do with CUDA, as the only time I ever had an issue was using PP and playback was at less than 100% scale.

  • Ms Project 2013 report for resource name, tasks less than 100% complete within a date range I can set each time

    I have seen I can create a report for a resource name with a specified date range, and one that can show me for a resource name any incomplete tasks, but I want to do the following and cant work out how to state it in the report constructor:
    resource name equals - {I want to set a given resource in here}
    % complete is less than 100%
    start - date range is between [today -7 days] and [today +7 days]
    Please can someone show me how this is possible, I know it will be and it is me that has been defeated!!

    workspacedesign,
    Oops, my bad. I missed the point that the Name field for assignment rows will be the task name and that's not what you want. There is also a glitch in the date range filter. So, here's how to fix that.
    First, in the Resource Usage view, copy the Name field to Text1. Now select the resource line and do a fill down for all assignments under that resource. Do that for each resource. This could be automated with VBA, but for now, a manual setup should work
    fine.
    Second, instead of testing for the Name field in the filter, test for the Text1 field.
    Third, change the Finish test to be "less than or equal to".
    Now when you apply that filter, enter beginning date of your range and then the ending date of your range followed by the resource name. You should get the data you want.
    Unfortunately formulas in custom fields are not as flexible in Project as they are in Excel. For example, in Project a formula can only operate on data for that row. Further, even if you use the formula Today() +7 for your filter criteria, the first time
    the filter is used, Project will hard code today's date into the filter. The normal way around both of these shortcomings is to use VBA.
    Hope this helps.
    John

  • Previewing HSL & Sharpening at less than 100% on Canon 1Ds MKI

    Hi, I'm new here and checked the archive for this topic with no luck.
    I am experiencing a degraded preview when adjusting the parameters for HSL and Sharpen/Noise tabs in ACR 4.3.1. The adjustments appear to have a grainy artifact at 66% and less but then perfectly smooth at 100% and more. Other adjustments seem fine- exposure, white balance, etc.
    I thought this might be by design at first, but this only occurs with .raw images from my 1Ds Mk1. I tried opening a few Tiff's in ACR and can't recreate the artifact.
    I can live without seeing accurate sharpening at less than 100%(I usually sharpen later, anyways), but making adjustments to the luminance in HSL would require seeing more of the image to make a good judgment.
    Anyone else have this issue?
    Thanks,
    CLD

    > It has been well-documented in articles on the Internet, in white papers, in online tutorials, and in books about ACR that you need to be viewing your images at at least 100% in order to accurately evaluate clarity, noise reduction and sharpening.
    I believe the OP conceded that, but thought that HSL adjustments needed to be evaluated within the context of the larger picture(?)
    [Caveat: I'm not yet a user of ACR4, but to my mind HSL adjustments involve color and tone, do they not? ... Or, is the OP wrong regarding not being able to see HSL changes at <100%?]

  • ACR6 Sharpening/NR visibility at less than 100% zoom

    I am seeing that ACR in CS5 now shows sharpening and noise reduction at less than 100% zoom.  Thanks for that Adobe (even though we know it's not "accurate" in the strictest sense).
    Now that we have that I am curious about the interpolation method used by ACR for screen display/zoom.  Is it the old PS way (the one where 25% and 50% were considered to be "better" at judging sharpness), the newer interpolation that started with PS CS4, or something entirely different?
    Also, this is more of a Bridge question but I have seen at least once so far where Bridge showed me sharpening applied in ACR6 in the Bridge preview but it seems a little quirky in that it doesn't always show.  Once it showed me NR but not sharpening.  Is this perhaps a little buggy still or is there a special combination of the Bridge preview preferences that are needed to make it work?  I have tried various combinations of the "monitor-sized previews", "100% previews", etc. and have tried to be diligent about purging the Bridge cache between changes but I can't seem to get it to display sharpening consistently in the normal preview (the loupe and full-screen at 100% or greater DO show sharpening and NR).
    Thanks.

    Someone needs to get busy and get OpenGL/OpenCL working in Camera Raw to accelerate resampling. 
    -Noel

  • Zoom to less than 100%?

    I have trouble believing that this is impossible, but I can't figure out how to do it. Is there any way to zoom an image to less than 100% while editing? The loupe can be set to 50%, but that doesn't let me retouch the image while it's on, unless there's some method to do that that I haven't found either. And that still wouldn't let me edit at, say 25%, which I occasionally want to do, since some of my images are in the 20+ megapixel range.

    I am using photos with only 10mp but I guessing that you are not seeing the whole photo, the same as if you were looking at the 10mp photo. Please correct me if I assume wrong.
    When I need to edit the whole photo I just click "Z" to see/preview the whole picture and "Z" again to see/preview actual size. There is also a button at the bottom right hand corner to do the same job.
    Another thing that may help is clicking Preferences~Previews and then adjust limit preview size.

  • Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. How can I increase the storage space?

    Question
    Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?

    Hi terrybohle1938,
    Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
    That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
    Hopefully this helps!

  • I have less than 100 MB left. I try using iCloud, but it seems like its not putting storage away. It says I have all 5 MB left.

    I have less than 100 MB left. I try using iCloud, but it seems like its not putting storage away. It says I have all 5 MB left. Please explain.

    5 GB*

Maybe you are looking for