Unable to Process Dimension

Hi Experts ,
I have upgrading 7.5M SP4 with adding dimensions but BPC will not allow to click OK when processign complete.
But the processing complete sucessfully showing message,but it will allow to click OK it is disabled.
If I try to close intentionally(like click 'X') its showing pop up shows :still application running.
I am forcing to close it in Task Manager,When I access BPC again, after logging off and logging back on, the
dimension shows to be updated correctly.Please suggest.
Regards
VYVadan

Hi sorin ,
You suggested ,the upgrade process was not completed.So do I need to re start the process or any suggesition for New Dimension process.If I do one by one dimension and then process means does this dimensions are properly adding or else?
Why this popup is occuring and rest the process is running fine.
I have reviewed different applications
Modify Application screens shows
The task has been sucessfully completed
Optimize application Screen shows same
Application Count : 1
application Name :OPS1_Daily
Process Type : Full Optimize
This Optimization process never goes beyond successfully completed,its strucked middle.
First I have mentioned
If I am forcibly close the Validation Process Screen on top X mark instead of diabled OK button , based on the The task has been sucessfully completed message but immediately the popup shows :Planning and onsolidastion Administration still running,Please wait
Please sugegst
Regards
VYVadan

Similar Messages

Unable to process dimension - BPC 7 Microsoft

hello,
I've installed BPC 7.0 SP3 and dimension processing doesn't work. (SQL 2005 SP3 Enterprise, IIS 6, Windows 2003 SP2 Enterprise...)
Dimension processing stops at the beginning (step 1 - validating dimension) with this message: "An error has occurred during processing".
On BPC client computer, the log contained in "My DocumentsOutlookSoftLoggingAdminMemberProcess" shows these messages:
    DetailMsg : {System.Web.Services.Protocols.SoapException: Server was unable to process request. --> Could not find file "D:BPCDataWebfoldersApShellAdminApp%CHANGED_DIM%.xls".
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at OSoft.Consumers.Admin.AdminMemberProcess50.Handle.OpenSheet(Boolean blnOpen, String strDimName)}
    DetailMsg : {System.Exception: The system cannot find a cache file for this dimension.
   at OSoft.Consumers.Admin.AdminMemberProcess50.Handle.GetInformation(ArrayList aryAppList, ArrayList aryDimList, String strDefaultDim, Boolean blnFullProcess, Boolean blnOpenSheet, Boolean blnIsOpened, ArrayList& aryOpenDim, String& sMessage)}
==============[System Error Tracing End ]==============
Has anyone seen this before ?
I'm able to modify/process and optimize Apshell applications and Server Manager and client diagnostics are OK. No error message in event logs... So where is the problem ?
Thanks for your help. R.
Edited by: Rémy PLAUCHU on Mar 25, 2009 8:50 AM

Hi Sorin
I have one server for SQL/OLAP and one server for Files, Web and Application.
I've offered EVERYONE all rights on folders.
BPC Setup puts XCEEDZIP.DLL in Websrvr in and
install guide tells to put ANTIXSSLibrary.dll in Websrvrweb in
Do you agree with that ?
I've put XCEEDZIP.DLL and ANTIXSSLibrary.dll in BOTH folders (but tell me if the rule above is enough) and now:
I don't have any more error message when opening BPC admin.And ADMINCACHE_.zip file is not destroyed any more when refreshing dimension client files. That's better...But...
...when I want to process dimensions I still have an error message but a little different:
{System.Exception: Cannot find dimension member sheet file; use the export dimension feature to restore it from the member table...}
Do we still need an OSOFT Share and if we need it, where ? On the folder above webfolders ?
Folders (but not files inside them), folders remain with "Read" property greyed and checked. I do not know why. Whenever I uncheck the folders and apply...close the window and re-open they seem to be still with this property "Read" greyed and checked... Is it normal ?
Thanks a lot for your help. R.
NB: with File Monitor tool from sysinternals (Microsoft) we can see that we are back to the first error:
if we are processing the account dimension for example, dllhost.exe will work with account.xls file, then with account.xls.zip file, account.xls.zip.001 file and account.xlsTemp_ file and then it fails to find the %CHANGED_DIM%.xls file...
Edited by: Rémy PLAUCHU on Mar 26, 2009 7:47 PM

Planning Locale: en_US ,unable to load dimension.

Hi,
When i load meta data by command prompt,after enter password.I faced following issue.
Any help will be appreciated.
Planning locale: en_US
using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/li
b64
EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "E
PM_ORACLE_HOME".
using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
For non-DP app, Request dimension not needed
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from
JVM property[EPM_ORACLE_INSTANCE].
Loaded Version of Essbase RTC: 0xb1221
[Thu Feb 07 12:34:09 PKT 2013]Unable to obtain dimension information and/or perf
orm a data load: Unable to find specified load dimension "Account/L:c:/outlineLo
ad.log" in "Outsourc" application.
[Thu Feb 07 12:33:59 PKT 2013]Command line arguments: /A:Outsourc /U:admin /I:c:
\accounts.csv /D:Account/L:c:/outlineLoad.log /X:c:/outlineLoad.exe
Successfully logged into "Outsourc" application, Release 11.122, Adapter Interfa
ce Version 5, Workforce supported and not enabled, CapEx not supported and not e
nabled, CSS Version 3
[Thu Feb 07 12:34:09 PKT 2013]Successfully located and opened input file "c:\acc
ounts.csv".
[Thu Feb 07 12:34:09 PKT 2013]Header record fields: Account, Parent, Data Storag
e, Description, Data Type, Account Type, Aggregation(Plan1)
[Thu Feb 07 12:34:09 PKT 2013]Unable to obtain dimension information and/or perf
orm a data load: Unable to find specified load dimension "Account/L:c:/outlineLo
ad.log" in "Outsourc" application.
[Thu Feb 07 12:34:09 PKT 2013]Examine the Essbase log files for status if Essbas
e data was loaded.
[Thu Feb 07 12:34:09 PKT 2013]Planning Outline data store load process finished
with exceptions: not all input records were read due to errors (or an empty inp
ut file). 0 data records were read, 0 data records were processed, 0 were succes
sfully loaded, 0 were rejected.
Thank You.
Edited by: 985307 on Feb 7, 2013 12:02 AM

Thank you So much Sir :) It helped me ,some accounts details are loaded,but some are not.Kindly again identify issue.The meta data file i have created with the help of *"Getting Started with Oracle Hyperion Planning "* PDF book.
c:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1>OutlineLoad /A:
Outsourc /U:admin /I:c:\accounts.csv /D:Account /L:c:/outlineLoad.log /X:c:/outl
ineLoad.exc
Enter password:
Planning locale: en_US
using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/li
b64
EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "E
PM_ORACLE_HOME".
using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
For non-DP app, Request dimension not needed
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from
JVM property[EPM_ORACLE_INSTANCE].
Loaded Version of Essbase RTC: 0xb1221
Reaquired task list lease: Fri Feb 08 10:21:37 PKT 2013: 1360300897243
[Outsourc] Valid userId: 50001 found in session: [1862242825, admin, native://DN
=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER
com.hyperion.planning.InvalidMemberException: The member Net Income before taxes
does not exist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Net Income From Operati
ons does not exist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Gross Profit does not e
xist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Gross Profit does not e
xist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Net Income From Operati
ons does not exist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member SG&A does not exist or
you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member SG&A does not exist or
you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member SG&A does not exist or
you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Net Income before taxes
does not exist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Net Income before taxes
does not exist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
java.lang.IllegalArgumentException: Invalid value for field Account Type: Liabil
ities.
at com.hyperion.planning.db.HspHALDBImpl.saveMember(HspHALDBImpl.java:36
9)
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:9041)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Liabilities does not ex
ist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Liabilities does not ex
ist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.HspRuntimeException: Exchange Rate must be None if Data Ty
pe is Non-Currency, Percentage, Smart List, Date, or Text. Member: Statistical
Drivers
at com.hyperion.planning.db.HspDEDBImpl.validateAndSetAccountMemberInfor
mation(HspDEDBImpl.java:6659)
at com.hyperion.planning.db.HspDEDBImpl.saveMember(HspDEDBImpl.java:2871
at com.hyperion.planning.db.HspDEDBImpl.saveMember(HspDEDBImpl.java:2651
at com.hyperion.planning.db.HspHALDBImpl.saveMember(HspHALDBImpl.java:57
1)
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:9041)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Statistical Drivers doe
s not exist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)
com.hyperion.planning.InvalidMemberException: The member Statistical Drivers doe
s not exist or you do not have access to it.
at com.hyperion.planning.HyperionPlanningBean.saveMember(HyperionPlannin
gBean.java:8977)
at com.hyperion.planning.utils.HspOutlineLoad.saveDataRecord(HspOutlineL
oad.java:801)
at com.hyperion.planning.utils.HspOutlineLoad.parseAndLoadInputFile(HspO
utlineLoad.java:542)
at com.hyperion.planning.utils.HspOutlineLoad.halAdapterInfoAndLoad(HspO
utlineLoad.java:112)
at com.hyperion.planning.utils.HspOutlineLoad.loadAndPrintStatus(HspOutl
ineLoad.java:1303)
at com.hyperion.planning.utils.HspOutlineLoad.main(HspOutlineLoad.java:1
292)

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

How do I replace bookmark bar that was lost when a new Mozilla Fox Start page suddenly appeared with a Zone Alarm Community Toolbar, and nothing I have so far tried, working with "Show all Bookmarks", works ("Unable to process the backup file).

My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
I'm out of ideas. Is there something else to try?

Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
    at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33

"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz

HELP! Lost ALL my bookmarks & Bookmark Toolbar is empty. Attempts to restore from the backup files yields an error message that says, "Unable to process the backup file." Have tried opening nearly all 10 existing backups w/same result.

I was in the midst of a Firefox session w/two windows open. Nothing special about the sites. No fancy javascripts or anything. When I closed the second window and opened the "History, Show all History" pull-down, the Library screen had no data in it.
I looked for the Bookmarks.html file in my profile and it is missing. I tried renaming an old .bak file from a couple years ago and I can open it as a file and see the text of it displayed but Firefox will not recognize it as and open it as the Backups file.
Following the directions already posted - using "History, Show all History" then the "Import and Backup, Restore" process - allows Firefox to see all the backups, but trying to restore from any of them yields the "Unable to process the backup file" error message.
I have re-started my machine from a cold start - twice now.

The file that stores bookmarks is probably damaged, for details on how to fix that see http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

The Mrs. and I are receiving "The iTunes Store is unable to process purchases at this time. Please try again later." message whenever we try to update apps or purchase new apps. This is on two separate iPhone4's running 4.3.3

I haven't updated the iOS this week because I'm still working on resolving a separate issue, syncing playlists back to iTunes from the iPhone after a Snow Leopard restore.
FWIW-- The Mac Store on my MacBook also returns a similar error message when I try to update pixelmator and evernote. I get "The iTunes Store is unable to process purchases at this time. Credit card processing is temporarily unavailable. You may continue to browse the store. Please try to make your purchase later."
After that error in the Mac Store, I immediately get the following error message: "We Could Not Complete Your Request. There was an error in the App Store. Please try again later. (100)"

Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again.

Bugs in BC CRM web service need to be fix (Server was unable to process request ERROR: A server error has occured)

I'm using the following code to retrieve order list is working fine but it give me an error Server was unable to process request ERROR: A server error has occurred when I trying to retrieve order total paid with same code: and the output when retrieve order total paid is [object Object]
var wsUrl = "https://mysite.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx?WSDL";
                      var RetrieveTotalPaidXML =
                      '<?xml version="1.0" encoding="utf-8"?>\
                      <soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">\
                      <soap12:Body>\
                      <Order_RetrieveTotalPaid xmlns="http://tempuri.org/CatalystDeveloperService/CatalystCRMWebservice">\
                      <username>user</username>\
                      <password>pass</password>\
                      <siteid>111222</siteid>\
                      <orderId>112345</orderId>\
                      </Order_RetrieveTotalPaid>\
                      </soap12:Body>\
                      </soap12:Envelope>';
                       $.ajax({
                        type: "POST",
                        url: wsUrl,
                        Host: "mysite.worldsecuresystems.com",
                        contentType: "application/soap+xml; charset=utf-8",
                        data: RetrieveTotalPaidXML,
                        dataType: "xml",
                        success: processSuccess,
                        error: function(){alert("Error: Something went wrong");}
                       function processSuccess(ResData) {
                       var RetrieveTotalPaidParse = $.parseXML(ResData);
                       var $xmlRetrieveTotalPaidParse = $(RetrieveTotalPaidParse);
                       var $Order_RetrieveTotalPaidResult = $xmlRetrieveTotalPaidParse.find('Order_RetrieveTotalPaidResult');
                               $Order_RetrieveTotalPaidResult = $(this).find('Order_RetrieveTotalPaidResult').text();
                               $('#RetrieveTotalPaidResult').text(Order_RetrieveTotalPaidResult);
I think there a bug in BC CRM Web Service when trying to make a request for Order_RetrieveTotalPaid using soap need to be fix

Perhaps it would be good to update the sample request as shown on the Developer reference page for this method (and, actually ALL of the SOAP samples)
The sample shows siteid (all lower case)

Error while processing dimension after add or delete property

Hi Experts,
I use BPC for MS SP6 with SQL Server 2008. I detected a problem while processing dimension after add or delete property.
The error message is: u201CMemory error: Allocation failure : Not enough storage is available to process this command. Error Code = 0x8007000E, External Code = 0x00000000.u201D
I tried to truncate and drop dimension tables and process dimension again, and it doesnu2019t work.
Any idea?
Thanks a lot for your support!
Albert

Hi Sorin,
Yestarday in the afternoon, we added a Property at another Dimension, and we continued having the same problem: we had errors when processing that dimension, but after restarting the server, we can process dimension.
Looking at the Event Viewer, at 'OutlookSoft log' environment, the following error appears:
<<
3/28/2011 6:57:15 PM
ModuleName : Olap9Manager - DeleteDimension
Message : Error Code = 0x8007000E, External Code = 0x00000000:.
Error Code = 0x8007000E, External Code = 0x00000000:.
Error Code = 0x8007000E, External Code = 0x00000000:.
Stack :    at Microsoft.AnalysisServices.AnalysisServicesClient.SendExecuteAndReadResponse(ImpactDetailCollection impacts, Boolean expectEmptyResults, Boolean throwIfError)
   at Microsoft.AnalysisServices.AnalysisServicesClient.Alter(IMajorObject obj, ObjectExpansion expansion, ImpactDetailCollection impact, Boolean allowCreate)
   at Microsoft.AnalysisServices.Server.Update(IMajorObject obj, UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings, ImpactDetailCollection impactResult)
   at Microsoft.AnalysisServices.Server.SendUpdate(IMajorObject obj, UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings, ImpactDetailCollection impactResult)
   at Microsoft.AnalysisServices.MajorObject.Update(UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings)
   at Microsoft.AnalysisServices.MajorObject.Update(UpdateOptions options)
   at Osoft.Services.Platform.YukonAdmin.Olap9Manager.DeleteDimension(String strAppset, String strDimension, String strCube, String dimTablePrefx, Boolean bDeleteFromDB, String& strMsg, Boolean bOnlySharedDim)
>>
Any idea in order to identify the root cause?
Thanks in advance,
Albert

Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database 1006.

HI all,
I ran into a problem with one of the servers in my DAG. Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server. The DAG continued to function on the other server. So this particular
DB01 had only some test accounts in it so I removed the database copy. Unfortunately the removal must not have completed correctly.
After recovering the needed space in the partition, I tried to recopy the database and it failed. So I deleted the entire database from the active server and it successfully removed it from the active server. Now on both the servers the database
is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists. I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
of the database (failed redundancy) but there should be zero copies.
This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists.
Can you point me to the location to clean this up?
Log Name:      Application
Source:        MSExchange Mailbox Replication
Date:          02/25/2011 2:00:07 PM
Event ID:      1006
Task Category: Service
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      email1.domain.com
Description:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: DB01
Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropLogon [254]
    Lid: 17082   ROP Error: 0x3EB
    Lid: 26937
    Lid: 21921   StoreEc: 0x3EB
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 22086
    Lid: 27206
    Lid: 17990
    Lid: 16966   StoreEc: 0x8004010F
    Lid: 31433   StoreEc: 0x8004010F
    Lid: 8620    StoreEc: 0x3EB
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x3EB
    Lid: 26297
    Lid: 16585   StoreEc: 0x3EB
    Lid: 32441
    Lid: 1706    StoreEc: 0x3EB
    Lid: 24761
    Lid: 20665   StoreEc: 0x3EB
    Lid: 25785
    Lid: 29881   StoreEc: 0x3EB
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange Mailbox Replication" />
    <EventID Qualifiers="32772">1006</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
    <EventRecordID>181576</EventRecordID>
    <Channel>Application</Channel>
    <Computer>email1.domain.com</Computer>
    <Security />
</System>
<EventData>
    <Data>DB01</Data>
    <Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropLogon [254]
    Lid: 17082   ROP Error: 0x3EB
    Lid: 26937
    Lid: 21921   StoreEc: 0x3EB
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 22086
    Lid: 27206
    Lid: 17990
    Lid: 16966   StoreEc: 0x8004010F
    Lid: 31433   StoreEc: 0x8004010F
    Lid: 8620    StoreEc: 0x3EB
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x3EB
    Lid: 26297
    Lid: 16585   StoreEc: 0x3EB
    Lid: 32441
    Lid: 1706    StoreEc: 0x3EB
    Lid: 24761
    Lid: 20665   StoreEc: 0x3EB
    Lid: 25785
    Lid: 29881   StoreEc: 0x3EB     </Data>
</EventData>
</Event>

Hi
This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases.
Restarting the service will clear the cache.
Maybe it is the simplest way to solve it.
If it doesn’t work, you can try cmd to check it.
Get-MailboxDatabase : Can you find the database which you delete?
Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database.

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. Event 1121

Hello all,
We migrated our Exchange server from 2003 to 2010. After the mailbox move requests were finished we had one that was stuck. We basically skipped it as we had a lot of other things to finish over the weekend. Here we are a year later, the old exchange server
is gone and so is an old DC. I am receiving an error every four minutes in event viewer.
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '3e46b7cb-2ac0-42c1-98e8-57517a19ee40'
Database GUID: '5c6c573b-4f45-4ce3-b296-11cf69c2e2b6'
Error: Unable to find 'OLD Domain Controller' computer information in domain controller 'OLD Domain Controller' to perform the suitability check. Verify the fully qualified domain name..
I have checked in EMC for move requests. None are listed. I have checked the DCs listed in EMC properties. Old DC is not listed.
I also ran these commands in shell to attempt to cancel the stuck request.
Get-MoveRequest -MoveStatus Completed;Pending;InProgress;Failed;CompletedWithWarning;Suspended;Queued;CompletionWithProgress : Remove-MoveRequest
NO changes. Still throwing error. Any suggestions? I also tried using the guid and shell to look at the move request. Systems replies no such request.

Hello,
Please try to restart iis services to check the result.
If the issue persists, I recommend you ping you DC server on your exchange server to check if your exchange server can communicate with your DC server.
If there are other DCs, please try to use set-adserversettings cmdlet to specify a DC for your exchange server.
Set-AdServerSettings
http://technet.microsoft.com/en-us/library/dd298063(v=exchg.150).aspx
Besides, please install the lasted rollup to check the result.
Cara Chen
TechNet Community Support

Unable to Process Dimension

Similar Messages

Maybe you are looking for