Unable to reactivate WAE after sw upgrade to 4.2.3c

Hi all,
on another WAE i have the problem that it didn't come back Online.
reboot of the device didn't fix it.
additional "cms recover identity" failed even if everything looks like described in config guide.

Dieter,
Before you tried doing the cms recovery identity default, did you mark the device as replaceable in the CM?
Once the above screen has been verified try the following on your WAE:
pdi-7341-19#cms deregister force
Deregistering WAE device from Central Manager will result in loss of data on encrypted file systems, imported certificate/private keys for SSL service and cifs/wafs preposition credentials. If secure store is initialized and open, clear secure store and wait for one datafeed poll rate to retain cifs/wafs preposition credentails.
Do you really want to continue (yes|no) [no]?yes
Disabling management service.
management services stopped
Sending de-registration request to CM
Failed to contact CM(Unmarshaled: 9001). Please check connectivity with CM device and status of management service on CM.
Device de-regsitration failed, removing device registration information.
Please delete the device record on the Central Manager.
SSMGR RETURNING: 7 (Success)
Removing cms database tables.
Re-initializing SSL managed store and restarting SSL accelerator.
If cifs preposition credentials are configured, please reconfigure preposition credentials using 'accelerator cifs preposition credentials username password {0 | 1} ' config CLI command
Deregistration complete. Save current cli configuration using 'copy running-config startup-config' command because CMS service has been disabled.
pdi-7341-19#cms recover identity default
Is device identity recovery used for WAFS 3.x device migration to WAAS (yes|no) [no]?
Registering WAAS Application Engine...
Sending device identity recovery request to Central Manager with address 14.110.3.21
Please wait, initializing CMS tables
Successfully initialized CMS tables
Registration complete.
If core or edge service was enabled on the device you're replacing, this device will be reloaded upon successful activation
pdi-7341-19(config)#cms enable
Please preserve running configuration using 'copy running-config startup-config'.
Otherwise management service will not be started on reload and node will be shown
'offline' in WAAS Central Manager UI.
management services enabled
pdi-7341-19#sh cms info
Device registration information :
Device Id                            = 348
Device registered as                 = WAAS Application Engine
Current WAAS Central Manager         = 14.110.3.21
Registered with WAAS Central Manager = 14.110.3.21
Status                               = Online
Time of last config-sync             = Sat Jan 15 20:40:56 2011
CMS services information :
Service cms_ce is running
Hope this helps,
Mike Korenbaum
Cisco WAAS PDI Help Desk
http://www.cisco.com/go/pdihelpdesk

Similar Messages

Mac OS X 10.5: Unable to log in after an upgrade install fix does not work?

Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warren

baltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren

Unable to continue activation after i upgrade version

unable to continue activation after i upgrade version in my 3gs who knows how to solve it?

That's almost always because the phone was hacked to illegally unlock it.

TS3406 unable to make calls after iOS7 upgrade

Howdy
After my upgrade I am unable to call out unless on my wifi, but can receive. Seems like a switch to throw, no?

If that's the case, what did the carrier tells you when you ask them?
Do a Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
Message was edited by: ckuan

Canon Wi-Fi Printer Unable to find SSID after OS upgraded

I am using Canon MG4100 series printer. After I upgraded my iMac OS X 10.9 and also upgraded the firmware of my Time Capsule, my printer is no longer able to find the SSID. While all other devices have no issue except the Canon printer. Anyone can help?

Make sure the wireless names.. and TC name is smb compatible.
Short.. 2-20 characters
No spaces
Pure alphanumeric.
The standard apple names are invalid in most OS.
Even apple manipulate the network names..
Turn off security and fix the wireless to 11, 6, 1 in that order.. just as a test. If all of them fail,
Then I recommend you buy a cheap TP-Link, edimax etc wireless router and use it as a WAP.. plugged into the TC.

Unable to eject DVD after Win7 upgrade on Satellite L series

I have finished the windows 7 upgrade.
Everything went smoothly except thta at the end I was unable to eject the windows 7 upgrade DVD.
Using the push button on it, or right click on the lector then eject, nothing happens.
Should I look for drivers and where?

Hi
You dont need any drivers for that
If the CD/DVD drive is connected properly then you should be able to eject the disk without any big troubles maybe something clams somewhere
There is a tiny hole near the eject button use an small object like staple or something like that and put it carefully into this small hole. This should help to eject the disk.
Cheers

Unable to download Application after iOS4 upgrade

I tried to download / update apps directly to iphone after upgrading to iOS4, but was prompted the message "Unable to Download Application.... will be available for download when you log in to the iTunes Store on your computer"
Anyone can help??

Most of the users with the updated iOS4 were suffering with the similar problem.
Only download via Wifi is OK, for 3G network, it prompts the same msg as u said.

Unable to close "Notes" after Mavericks Upgrade

Hi Everyone,
I am using a MacPro (pre retina version) 2.4 Ghz,i5 version and recently upgraded to Mavericks.
Post upgrade, “Notes” automatically opens and stays on top of other applications. Force Quit doesn’t help either, causes it to reopen. It’s practically making the Mac unusable with the focus automatically shifting to “Notes” every 2-3 secs, even if I am using any other program. I have tried restarting and re-installing Mavericks.
Any suggestions ?
Thanks,
- K

While Notes is open, try doing Notes > About Notes from Notes' menu.
Does it show Version 2.0? That is the proper version to accompany Mavericks.
If it shows something else, it is either not the Apple Notes product, or incorrectly left over from some previous OS X.

Unable to fetch mail after system upgrade

I use Evolution as the mail client for several months and everything goes fine, however, since last week, (or several days ago, I'm not quite certain), It always hangs when fetching new mails. More specifically, it hangs after the POP3 summary is successfully fetched. That is, the total amount of new mails is correctly shown, while the mail contents could not be downloaded from the server. I tried two other mail client, sylpheed & balsa, while the former worked perfectly, the latter hanged just exactly as what evolution did. Different mail servers were also tested, the results showed that all POP3 protocal based opertations were failed, but nothing wrong was found for the SMTP & IMAP based operations.
Does any one have any idea? Is is possible that Evolution & Balsa share some buggy library which functions as the POP3 mail fetcher?
Last edited by d7wang (2009-05-17 08:30:33)

Don't double post.... you risk both being closed.
Reply here: http://bbs.archlinux.org/viewtopic.php?pid=554458

Unable to Log In After Software Update

Hello:
After running Software Update, I am unable to log in.
I found the following support article:
Mac OS X 10.5: Unable to log in after an upgrade install
Article: TS1543
http://support.apple.com/kb/TS1543?viewlocale=en_US
However, upon step 8 of the instructions, the following error appears:
delete Invalid Path
<dscl_cmd> DS Error: -14009 (eUnknownNodeName)
This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
Any suggestions are greatly appreciated.
-Warren

baltwo:
Thanks! I think a week would have gone by before I realized this on my own.
-Warren

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
Clinton

Unable to open iphoto after ver 11 upgrade

Unable to open iphoto after ver 11 upgrade.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Unable to reactivate Windows 7 after clean install - help!

Hi,
Yesterday I formatted my C:\ drive in order to perform a fresh install of Windows 7 Home Premium. I am unsure of whether I was using 64 or 32 bit. I didn't have an install disc so borrowed a friend's retail Home Premium disc and used my OEM key to install. This didn't work and I am unable to reactivate my copy of Windows 7. Having read some other forum posts it would seem that I should have made a backup before formatting my hard drive, but it's too late now.
How can I successfuly reactivate my OEM copy of Windows 7? I am reinstalling on the same exact PC so believe that this should be possible.
Thanks
sad_muso

Hello @sad_muso,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to activate your version of Windows 7 after a clean install of the operating system, and I would be happy to help you!
To reactivate Windows 7 on your desktop computer, I recommend following the steps in this document on Windows 7, Vista, XP Product Activation.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

[SOLVED] Unable to boot after last upgrade [HP Smart Array]

Hello guys.
After last upgrade I'm unable to boot. I have fileserver with 2 discs in HP Smart Array RAID 1.
While booting, kernel is unable to find my raid (should be cciss) and therefore lvm2 hook fails to find root partition. While going into recovery, I can chroot without an issue, lsmod shows that cciss driver is properly loaded, disk exits in /dev/cciss/, logical group and volumes are detected properly.
No matter what I do, I just can't get cciss module into kernel. Putting in MODULES in mkinitcpio.conf's MODULES="" didn't help. I'm listing my initramfs images and there is no cciss.ko. I'm also searching for module in my filesystem and can not find it.
Any help will be appreciated.
Last edited by edke (2012-06-04 10:39:20)

Thank you for your quick reply.
DSpider wrote:First of all, have you tried the Fallback entry? Because initramfs-linux-fallback.img is supposed to have a full range of modules.
Of course, no change.
DSpider wrote:
Second, after editing /etc/mkinitcpio.conf you need to regenerate your initramfs.
# mkinitcpio -p linux
But the MODULES section needs to have something in there...
Here's mine:
MODULES="pata_amd sata_nv ehci-hcd ohci-hcd ext2 ext3 ext4 vfat snd-hda-intel"
You probably need "mdadm" or "mdadm_udev" in there too, I'm not sure... I don't use RAID, but maybe these will help:
https://wiki.archlinux.org/index.php/Mk … Using_RAID
https://wiki.archlinux.org/index.php/So … ID_and_LVM
HP Smart Array is hardware RAID, therefore I don't need mdadm. Right module should be cciss, but this is somehow not working. Adding this into MODULES does not add cciss module to image.
When I'm booting from Arch install for recovery and chroot, cciss is loaded and my HP Smart Array disk is visible.

SOAP unable to create a socket after OS upgrade OS/400 V5R4 to V7R1

Hello,
after we upgraded our OS from System i V5R4 to V7R1 we have problems with our SOAP adapters.
In the runtime workbench and also in the SXMB_MONI the following error occured:
SOAP: call failed: java.io.IOException: unable to create a socket
Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket
Before the OS upgrade the adapter rans without any errors and we tested the connection to the partner
with an system running V5R4 with success. So it seems to be an error that came with the OS upgrade.
Any idea? Had any one the same error after migration to V7R1? Thanks for your help.
Best regards,
Matthias

Hello,
we found out that the error is attached to DNS and Java stack. Our ABAP stack can set the url to the correct IP adress, if we configure a entry in SM59. Also the java stack calls our partner over SOAP with IP adress, but not with url. The urls are stored in the local host table, so we suppose that the java stack doesn't use the local dns table and doesn't ask our dns server for the right ip adress.
Does anybody know this issue? The only change we did is upgrade OS/400 from V4R4 to V7R1. If a mod see this, I think it make sence to move this thread into the forum SAP on DB2 UDB for i5/OS (DB4). Thank's.
Matthias

Unable to reactivate WAE after sw upgrade to 4.2.3c

Similar Messages

Maybe you are looking for