Unable to restore database using RMAN in oracle 10g

Hi Everyone!!!!!!!
I have following scenario. In which I don't want to drop newly created tablespace (test). So, let me know how to restore database from existing backup without dropping new tablespace and taking new backup?
1. I took database backup as
RMAN > backup database;
2. Create one tablespace "test"
3. Then I tried to restore database as (In mount mode)
RMAN > restore database
4. But I can't restore database. Even I tried after taking "test" tablespace offline , It returns error as follow
ORA-01119: error in creating database file 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTCAT\TEST.DBF'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
Please suggest me step/way so that I can restore database without taking new backup or dropping new tablespace (test).........

Hello;
Rename this datafile :
D:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTCAT\TEST.DBF
Then try the restore again.
If this isn't a test database stop and think about how you will recover if this does not work. That is how will you recover from the recover if it goes bad?
Best Regards
mseberg

Similar Messages

  • Clone database using RMAN on Oracle 10g

    contents of Memory Script:
    shutdown clone;
    startup clone nomount ;
    executing Memory Script
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 08/26/2009 15:55:39
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06136: ORACLE error from auxiliary database: ORA-01013: user requested canc
    el of current operation
    how to solve this error?
    Kushal

    Hi,
    but i am not able to configure using enterprise manager. it is always giving error.You could check the OEM forum or raise an SR at metalink.
    Hard to tell what is going on without the details.
    Regards,
    Tycho

  • Unable to restore TABLESPACE using RMAN backups

    Hi,
    I am not able to restore tablespace using RMAN (TSPITR).
    I have full backup of database,
    While try to restore it's failed.
    RMAN> recover tablespace TEST1 until logseq 706 auxiliary destination '/tmp';
    Starting recover at 16-OCT-13
    using channel ORA_DISK_1
    RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
    List of tablespaces expected to have UNDO segments
    Tablespace SYSTEM
    Tablespace UNDOTBS2
    Creating automatic instance, with SID='CsFz'
    initialization parameters used for automatic instance:
    db_name=TRAINEE
    db_unique_name=CsFz_tspitr_TRAINEE
    compatible=11.2.0.0.0
    db_block_size=8192
    db_files=200
    sga_target=280M
    processes=50
    db_create_file_dest=/tmp
    log_archive_dest_1='location=/tmp'
    #No auxiliary parameter file used
    starting up automatic instance TRAINEE
    Oracle instance started
    Total System Global Area     292933632 bytes
    Fixed Size                     1336092 bytes
    Variable Size                100666596 bytes
    Database Buffers             184549376 bytes
    Redo Buffers                   6381568 bytes
    Automatic instance created
    List of tablespaces that have been dropped from the target database:
    Tablespace TEST1
    contents of Memory Script:
    # set requested point in time
    set until  logseq 706 thread 1;
    # restore the controlfile
    restore clone controlfile;
    # mount the controlfile
    sql clone 'alter database mount clone database';
    # archive current online log
    sql 'alter system archive log current';
    # avoid unnecessary autobackups for structural changes during TSPITR
    sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
    executing Memory Script
    executing command: SET until clause
    Starting restore at 16-OCT-13
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=81 device type=DISK
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece /oracle/product/11.2.0/dbhome_1/dbs/c-332232391-20131016-09
    channel ORA_AUX_DISK_1: piece handle=/oracle/product/11.2.0/dbhome_1/dbs/c-332232391-20131016-09 tag=TAG20131016T144951
    channel ORA_AUX_DISK_1: restored backup piece 1
    channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
    output file name=/tmp/TRAINEE/controlfile/o1_mf_95wbkpvj_.ctl
    Finished restore at 16-OCT-13
    sql statement: alter database mount clone database
    sql statement: alter system archive log current
    sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
    contents of Memory Script:
    # set requested point in time
    set until  logseq 706 thread 1;
    # set destinations for recovery set and auxiliary set datafiles
    set newname for clone datafile  1 to new;
    set newname for clone datafile  7 to new;
    set newname for clone datafile  2 to new;
    set newname for clone tempfile  1 to new;
    set newname for datafile  6 to
    "/oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf";
    # switch all tempfiles
    switch clone tempfile all;
    # restore the tablespaces in the recovery set and the auxiliary set
    restore clone datafile  1, 7, 2, 6;
    switch clone datafile all;
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    renamed tempfile 1 to /tmp/TRAINEE/datafile/o1_mf_temp_%u_.tmp in control file
    Starting restore at 16-OCT-13
    using channel ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
    channel ORA_AUX_DISK_1: restoring datafile 00001 to /tmp/TRAINEE/datafile/o1_mf_system_%u_.dbf
    channel ORA_AUX_DISK_1: restoring datafile 00007 to /tmp/TRAINEE/datafile/o1_mf_undotbs2_%u_.dbf
    channel ORA_AUX_DISK_1: restoring datafile 00002 to /tmp/TRAINEE/datafile/o1_mf_sysaux_%u_.dbf
    channel ORA_AUX_DISK_1: restoring datafile 00006 to /oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf
    channel ORA_AUX_DISK_1: reading from backup piece /tmp/1iomi9rv_1_1
    channel ORA_AUX_DISK_1: piece handle=/tmp/1iomi9rv_1_1 tag=TAG20131016T144935
    channel ORA_AUX_DISK_1: restored backup piece 1
    channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:15
    Finished restore at 16-OCT-13
    datafile 1 switched to datafile copy
    input datafile copy RECID=11 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_system_95wbkybb_.dbf
    datafile 7 switched to datafile copy
    input datafile copy RECID=12 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_undotbs2_95wbkycy_.dbf
    datafile 2 switched to datafile copy
    input datafile copy RECID=13 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_sysaux_95wbkybz_.dbf
    contents of Memory Script:
    # set requested point in time
    set until  logseq 706 thread 1;
    # online the datafiles restored or switched
    sql clone "alter database datafile  1 online";
    sql clone "alter database datafile  7 online";
    sql clone "alter database datafile  2 online";
    sql clone "alter database datafile  6 online";
    # recover and open resetlogs
    recover clone database tablespace  "TEST1", "SYSTEM", "UNDOTBS2", "SYSAUX" delete archivelog;
    alter clone database open resetlogs;
    executing Memory Script
    executing command: SET until clause
    sql statement: alter database datafile  1 online
    sql statement: alter database datafile  7 online
    sql statement: alter database datafile  2 online
    sql statement: alter database datafile  6 online
    Starting recover at 16-OCT-13
    using channel ORA_AUX_DISK_1
    starting media recovery
    archived log for thread 1 with sequence 702 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_702_807275402.dbf
    archived log for thread 1 with sequence 703 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_703_807275402.dbf
    archived log for thread 1 with sequence 704 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_704_807275402.dbf
    archived log for thread 1 with sequence 705 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_705_807275402.dbf
    archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_702_807275402.dbf thread=1 sequence=702
    archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_703_807275402.dbf thread=1 sequence=703
    archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_704_807275402.dbf thread=1 sequence=704
    archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_705_807275402.dbf thread=1 sequence=705
    media recovery complete, elapsed time: 00:00:01
    Finished recover at 16-OCT-13
    database opened
    contents of Memory Script:
    # make read only the tablespace that will be exported
    sql clone 'alter tablespace  TEST1 read only';
    # create directory for datapump import
    sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''
    /tmp''";
    # create directory for datapump export
    sql clone "create or replace directory TSPITR_DIROBJ_DPDIR as ''
    /tmp''";
    executing Memory Script
    sql statement: alter tablespace  TEST1 read only
    sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/tmp''
    sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/tmp''
    Performing export of metadata...
       EXPDP> Starting "SYS"."TSPITR_EXP_CsFz":
       EXPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
       EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE
       EXPDP> Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
       EXPDP> Master table "SYS"."TSPITR_EXP_CsFz" successfully loaded/unloaded
       EXPDP> ******************************************************************************
       EXPDP> Dump file set for SYS.TSPITR_EXP_CsFz is:
       EXPDP>   /tmp/tspitr_CsFz_17454.dmp
       EXPDP> ******************************************************************************
       EXPDP> Datafiles required for transportable tablespace TEST1:
       EXPDP>   /tmp/TRAINEE/datafile/o1_mf_test1_95wbkyck_.dbf
       EXPDP> Job "SYS"."TSPITR_EXP_CsFz" successfully completed at 14:56:02
    Export completed
    contents of Memory Script:
    # shutdown clone before import
    shutdown clone immediate
    executing Memory Script
    database closed
    database dismounted
    Oracle instance shut down
    Performing import of metadata...
       IMPDP> Master table "SYS"."TSPITR_IMP_CsFz" successfully loaded/unloaded
       IMPDP> Starting "SYS"."TSPITR_IMP_CsFz":
       IMPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
    Removing automatic instance
    Automatic instance removed
    auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_temp_95wblk08_.tmp deleted
    auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_3_95wblj14_.log deleted
    auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_2_95wblhn8_.log deleted
    auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_1_95wblh8q_.log deleted
    auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_sysaux_95wbkybz_.dbf deleted
    auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_undotbs2_95wbkycy_.dbf deleted
    auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_system_95wbkybb_.dbf deleted
    auxiliary instance file /tmp/TRAINEE/controlfile/o1_mf_95wbkpvj_.ctl deleted
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 10/16/2013 14:56:16
    RMAN-06963: Error received during import of metadata
    RMAN-06961:    IMPDP> ORA-39123: Data Pump transportable tablespace job aborted
    ORA-01565: error in identifying file '/oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3

    Hi,
    Cloud you please cheek below link:
    ORACLE Cookies: TSPITR to recover a dropped tablespace
    Thank you

  • Help me! cann't restore database using RMAN!!

    i've backuped database using RMAN,
    now datafile of system tablespace have lost,
    and i execute the command as following:
    run {
    allocate channel c1 type disk;
    restore database;
    these are errors:
    RMAN-03002: failure during compilation of command
    RMAN-03013: command type: restore
    RMAN-03002: failure during compilation of command
    RMAN-03013: command type: IRESTORE
    RMAN-06003: ORACLE error from target database: ORA-01843: not a
    valid month
    RMAN-06097: text of failing SQL statement: select decode(bitand
    (festa,(4096+128)
    ),128,fecps,4096,fecps,0) ,decode(bitand(festa,
    (4096+128)),128,281474976710655,4
    096,controlfile_change#,0) ,decode(bitand(festa,
    (4096+128)),128,SYSDATE,4096,con
    trolfile_time,to_date('JAN 01 1988','MON DD
    YYYY')) ,feofs ,feonc_scn ,to_date(n
    vl(feonc_tim,'01/01/88 00:01:01'),'MM/DD/RR HH24:MI:SS')
    into :b1,:b2,:b3,:b4,:b
    5,:b6 from x$kccfe ,v$database where (fenum=:b7 and fedup=1)
    RMAN-06099: error occurred in source file: krmk.pc, line: 21652

    Try setting the NLS_DATE_FORMAT at the command prompt.

  • ORA-27067 Error while restoring database using RMAN

    Hi All,
    I am trying to restore the backups from my production database to an other server. I was able to restore the spfile and control files but at the step where I restore the datafiles I get the following error:
    RMAN-03002: failure of restore command at 11/03/2008 14:28:16
    ORA-19587: error occurred reading 0 bytes at block number 1
    ORA-27091: skgfqio: unable to queue I/O
    ORA-27067: skgfdisp: size of buffer is invalid
    The OS and the Oracle version on the source server (on which the backups were taken) and the target server (the backups being restored to) are the same. They both are running SUNOS 5.9 and Oracle 9.2. I
    Below are what were reported in the trace files:
    Unix process pid: 12359, image: oracle@ (TNS V1-V3)
    *** SESSION ID:(13.1) 2008-11-03 15:23:26.265
    *** 2008-11-03 15:23:26.275
    corrupt block 1 found during reading backup piece,file=/xxx/xxx/36jucqpe_1_1.bak, corr_type=1
    dump corrupted block
    2F11600 00020000 00000001 00000000 00000101 [................]
    2F11610 00000000 00000000 00000000 00000000 [................]
    Repeat 6 times
    *** 2008-11-03 16:19:29.778
    corrupt block 1 found during reading backup piece,file=/xxx/xxx/36jucqpe_1_1.bak, corr_type=1
    dump corrupted block
    3211C00 00020000 00000001 00000000 00000101 [................]
    3211C10 00000000 00000000 00000000 00000000 [................]
    Repeat 6 times
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 14
    Unix process pid: 12194, image: oracle@ (TNS V1-V3)
    *** SESSION ID:(11.3) 2008-11-03 14:09:42.986
    (blkno = 0x88, size = 276, max = 1, in-use = 1, last-recid= 0)
    (blkno = 0x89, size = 56, max = 145, in-use = 1, last-recid= 1)
    *** 2008-11-03 15:16:40.960
    *** SESSION ID:(13.1) 2008-11-03 15:16:40.951
    =====================
    PARSING IN CURSOR #2 len=68 dep=0 uid=0 oct=42 lid=0 tim=172140509128 hv=287842151 ad='35cd9364'
    alter session set events '10046 trace name context forever, level 8'
    END OF STMT
    EXEC #2:c=0,e=250,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=4,tim=172140509103
    WAIT #2: nam='SQL*Net message to client' ela= 8 p1=1650815232 p2=1 p3=0
    *** 2008-11-03 15:17:18.666
    WAIT #2: nam='SQL*Net message from client' ela= 36822299 p1=1650815232 p2=1 p3=0
    =====================
    PARSE ERROR #2:len=50 dep=0 uid=0 oct=3 lid=0 tim=172177341974 err=1219
    select /*+ FULL(t) */ count(*) from sys.source$ t
    WAIT #2: nam='SQL*Net break/reset to client' ela= 61 p1=1650815232 p2=1 p3=0
    WAIT #2: nam='SQL*Net break/reset to client' ela= 279 p1=1650815232 p2=0 p3=0
    WAIT #2: nam='SQL*Net message to client' ela= 5 p1=1650815232 p2=1 p3=0
    Unix process pid: 12156, image: oracle@ (TNS V1-V3)
    *** SESSION ID:(11.3) 2008-11-03 14:09:08.687
    Archiving is disabled
    Archiving is disabled
    Can anyone help me resolve this error?
    Thanks,
    Ashok

    Hi,
    We finally got this issue resolved. I think the error was because the source database server was running 64 bit Oracle 9.2.0 and we installed a 32 bit Oracle 9.2.0 database on the target server. We then did a fresh install of 64 bit Oracle 9.2.0 database on the target server and the restoration worked. Also, after copying all the backup files to the target DB server, change the access rights of all those files and the folder containing them to 777.
    Thanks,
    Ashok

  • How do I move databases using RMAN with minimal downtime ?

    How can I do the following using RMAN ?
    DB version 10.2.0.4
    Redhat 5.2
    I am not using an rman catalogIn the past I have moved large databases from 1 server to another with 5 minutes downtime using backups done the old way by putting tablespaces in backup mode and making copies of the datafiles.
    I used the following method :
    ========> Part 1
    STARTUP NOMOUNT
    CREATE CONTROLFILE REUSE set DATABASE "VPMY" RESETLOGS ARCHIVELOG
    MAXLOGFILES 32
    MAXLOGMEMBERS 3
         ....etc
    LOGFILE
    ......... log file names
    DATAFILE
    ... list of datafiles
    CHARACTER SET US7ASCII;
    ========> Part 2
    Up until the scheduled downtime, I would copy the archive logs from the production server to the new and run the following to apply the latest archive logs:
    RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL;
    ->AUTO<-
    ========> Part 3
    After applying the last archive log while in restrict mode -
    ALTER DATABASE OPEN resetlogs;
    My question is, how do I do Part 2 in RMAN. I have managed to duplicate databases and restore databases using rman to a different server, but this obviously only covers the data upto the backup point. How can I do the above parts 1 -3 with downtime of about 5 minutes like I have done using old methods ?
    Any help is much appreciated/

    you should be able to recover as you go with rman as well..
    copy the archived logs from A to B and apply them as they come in.
    run
    set until sequence x thread 1;
    recover database;
    if you're not opening the database after recovery you can just increment the set until sequence as the logs come in and do a new recovery.

  • I got the above error while i restore the standby database using RMAN backu

    Dear All,
    RMAN> crosscheck archivelog all;
    using target database controlfile instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=14 devtype=DISK
    specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
    Help need.i take the backup without catalog database.
    regards,
    DB

    rman> list backup;
    it shows lengthier but i showed only the corresponding
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3479    Full    17G        DISK        01:29:42     09-FEB-13
            BP Key: 3479   Status: AVAILABLE   Tag: 09FEB13_FULL_ESMSRV1_DB
            Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3479
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3480    Full    17G        DISK        01:21:30     09-FEB-13
            BP Key: 3480   Status: EXPIRED   Tag: TAG20130209T200021
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3480
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3481    Full    4M         DISK        00:00:03     09-FEB-13
            BP Key: 3481   Status: AVAILABLE   Tag: TAG20130209T212205
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
      Controlfile Included: Ckp SCN: 1759462488   Ckp time: 09-FEB-13
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3482    Full    0          DISK        00:00:01     09-FEB-13
            BP Key: 3482   Status: AVAILABLE   Tag: TAG20130209T212212
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
      SPFILE Included: Modification time: 08-FEB-13
    ls -l /oradatabkp
    root@drsrv1#ls -l /oradatabkp
    total 1108672
    drwxr-xr-x   2 ovsd       dba             96 Sep 27  2009 alert_bkp
    -rw-r--r--   1 oracle     dba            195 Mar 15  2007 create.sql
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 ctrl_bkp
    -rw-r--r--   1 root       sys        565114880 Apr 24  2007 drsrv1.tar
    drwxrwxrwx   2 root       sys             96 Jun 17  2011 drsrv2-ignitebkp
    drwxr-xr-x   4 root       sys             96 Apr 24  2007 esmsrv1
    -rw-r-----   1 root       sys        1613824 Feb 22  2007 esmsrv1stby.ctl
    -rw-r--r--   1 esmsrv1    dba           5120 Dec 31  2009 esmtables.dmp
    -rw-r--r--   1 esmsrv1    dba            538 Dec 31  2009 esmtables.log
    drwxrwxrwx   4 root       sys           8192 Mar 10  2009 export
    drwxr-xr-x   8 root       sys           8192 Apr 24  2007 finalbackup
    -rw-r--r--   1 oracle     dba           3820 Sep  5  2008 invalid.sql
    -rw-r--r--   1 esmsrv1    dba         303104 Dec 31  2009 kirdevports.dmp
    -rw-r--r--   1 esmsrv1    dba            591 Dec 31  2009 kirdevports.log
    drwxr-xr-x   2 root       root            96 Feb 12  2007 lost+found
    -rw-r--r--   1 oracle     dba          24954 Aug  9  2009 ovcontrol-090909.ctl
    drwxr-xr-x  22 root       sys           8192 Apr 24  2007 ovpi
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 pfile_bkp
    drwxrw-rw-   4 oracle     dba           8192 Feb 10 15:25 rman
    drwxr-xr-x  28 root       sys           8192 Feb  1 17:15 schedbkp
    drwxr-xr-x   2 oracle     dba           8192 Jul 11  2011 sdnnm
    -rw-r--r--   1 esmsrv1    dba           2196 Dec 31  2009 srirdevports.log
    drwxr-xr-x   2 oracle     dba             96 Mar 13  2009 statsreport
    -rw-r--r--   1 oracle     dba            966 Mar 15  2007 tbs.sql
    drwxr-xr-x   5 oracle     dba             96 Mar 16  2007 testov
    drwxr-xr-x   2 root       sys         442368 Mar 11  2009 trendadm_files
    root@drsrv1#ls -l /oradatabkp/rman
    total 37244448
    drwxr-xr-x   2 oracle     dba           8192 Feb 10 15:25 esmsrv1
    -rw-r-----   1 oracle     dba        19068198912 Feb  9 14:21 esmsrv1_full_db_09feb13
    drwxrw-rw-   2 oracle     dba           8192 Feb  9 21:36 openview
    -rw-r--r--   1 oracle     dba         920442 Feb  9 21:37 rmanbkp-all.log

  • Error to restoring database through rman

    Hi all,
    I am trying to restore database through rman its showing error. The error is
    RMAN> recover database;
    Starting recover at 13-APR-09
    using channel ORA_DISK_1
    starting media recovery
    unable to find archive log
    archive log thread=1 sequence=5
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 04/13/2009 13:00:44
    RMAN-06054: media recovery requesting unknown log: thread 1 seq 5 lowscn 543566
    Please let me know how to resolved this error;
    Thanks in advance
    Noman

    There's no "full or partial" recovery in Oracle.
    There are :
    1. Database Recovery and Tablespace Point In Time Recovery (aka TSPITR)
    In the former case, it is the database that is recovered.
    In TSPITR, a Tablespace is recovered to an (older) point in time, different from the rest of the database. Since a database must be consistent, a TSPITR is done by using an Auxiliary Instance -- only SYSTEM, UNDO and the required Tablespace are recovered to their own consistent point in time and then the Tablespace data is copied and and plugged back into the Target Database.
    2. Complete Recovery and Incomplete Recovery
    Complete Recovery is right upto the current point in time -- ie upto the last transaction in the online redo logs.
    Incomplete Recovery is upto any point of before the current online redo log (a Timestamp, SCN or LogSequenceNumber) .
    The scenario we are talking of is an Incomplete Recovery -- because we do not have the Online Redo Logs.

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • Creation of Logical Standby Database Using RMAN ACTIVE DATABASE COMMAND

    Hi All,
    I am in confusion how to create logical standby database from primary database using rman active database command.
    What i did:-
    Create primary database on machine 1 on RHEL 5 with Oracle 11gR2
    Create standby database on machine 2 on RHEL 5 With Oracle 11gR2 from primary using RMAN active database command
    Trying to create logical standby database on machine 3 on RHEL 5 with Oracle 11gR2 using RMAN active database command from primary.
    The point which confuse me is to start the logical standby in nomount mode on machine 3 with which pfile like i create the pfile for standby database do i need to create the pfile for logical standby db.
    I done the creation of logical standby database by converting physical standby to logical standby database
    I am following the below mentioned doc for the same:
    Creating a physical and a logical standby database in a DR environment | Chen Guang&amp;#039;s Blog
    Kindly guide me how to work over the same or please provide me the steps of the same.
    Thanks in advance.

    Thanks for your reply
    I already started the logical standby database with pfile in nomount mode. And successfully completed the duplication of database. by mentioning the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameter.
    But i am not able to receive the logs on the above mentioned blog i run the sql command to check the logs but getting "no rows selected"
    My primary database pfile is:
    pc01prmy.__db_cache_size=83886080
    pc01prmy.__java_pool_size=12582912
    pc01prmy.__large_pool_size=4194304
    pc01prmy.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    pc01prmy.__pga_aggregate_target=79691776
    pc01prmy.__sga_target=239075328
    pc01prmy.__shared_io_pool_size=0
    pc01prmy.__shared_pool_size=134217728
    pc01prmy.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/pc01prmy/adump'
    *.audit_trail='db'
    *.compatible='11.1.0.0.0'
    *.control_files='/u01/app/oracle/oradata/PC01PRMY/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01PRMY/controlfile/o1_mf_91g3mf6v_.ctl'
    *.db_block_size=8192
    *.db_create_file_dest='/u01/app/oracle/oradata'
    *.db_domain=''
    *.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
    *.db_name='pc01prmy'
    *.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
    *.fal_client='PC01PRMY'
    *.fal_server='PC01SBY'
    *.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
    *.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
    *.log_archive_dest_2='SERVICE=pc01sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=pc01sby'
    *.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='DEFER'
    *.log_archive_dest_state_3='DEFER'
    *.log_archive_max_processes=30
    *.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
    *.open_cursors=300
    *.pga_aggregate_target=78643200
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=236978176
    *.undo_tablespace='UNDOTBS1'
    My logical standby pfile is:-
    pc01ls.__db_cache_size=92274688
    pc01ls.__java_pool_size=12582912
    pc01ls.__large_pool_size=4194304
    pc01ls.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    pc01ls.__pga_aggregate_target=79691776
    pc01ls.__sga_target=239075328
    pc01ls.__shared_io_pool_size=0
    pc01ls.__shared_pool_size=125829120
    pc01ls.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/pc01ls/adump'
    *.audit_trail='db'
    *.compatible='11.1.0.0.0'
    *.control_files='/u01/app/oracle/oradata/PC01LS/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01LS/controlfile/o1_mf_91g3mf6v_.ctl'
    *.db_block_size=8192
    *.db_create_file_dest='/u01/app/oracle/oradata'
    *.db_domain=''
    *.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
    *.db_name='pc01prmy'
    *.db_unique_name='pc01ls'
    *.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
    *.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
    *.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
    *.log_archive_dest_2='LOCATION=/u01/app/oracle/flash_recovery_area/PC01LS/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=pc01ls'
    *.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
    *.open_cursors=300
    *.pga_aggregate_target=78643200
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=236978176
    *.undo_tablespace='UNDOTBS1'
    Kindly advice over the same

  • Error while cloning database using RMAN

    hi there,
    Here is our setup:
    OS: Solaris 5.9
    Database:9.2.0.3
    While cloning test database from our production database using RMAN, we happen to get the following error..
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/11/2007 15:28:59
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06100: no channel to restore a backup or copy of datafile 450
    RMAN-06100: no channel to restore a backup or copy of datafile 449
    give us a solution to rectify this problem.
    Thanks,
    Balu.

    Can you please post the RMAN restore script ?
    where are the backups located

  • Standby database using rman backup

    I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
    at the time i installed only oracle 11g software.
    Pls guide me to overcome the problem. i'm newcomer to oracle.
    Pls give the steps.
    Edited by: user10444101 on Apr 30, 2010 2:17 AM

    user10444101 wrote:
    I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
    at the time i installed only oracle 11g software.
    Pls guide me to overcome the problem. i'm newcomer to oracle.
    Pls give the steps.
    Edited by: user10444101 on Apr 30, 2010 2:17 AMSee the following link
    http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#i1008564

  • Create new database using rman cold backup

    It oracle 10g database version 10.2.0.4
    I took the cold backup of the database using rman ( Database name TEST)
    1.RMAN> startup mount;
    2.RMAN> backup database include current controlfile;
    3.RMAN> alter database open;
    I aim to create the new database called DEMO using this backup
    Please let know the setps for creating new database
    Edited by: prajeevan on Jan 19, 2011 9:09 PM

    I took the cold backup of the database using rman ( Database name TEST)
    1.RMAN> startup mount;
    2.RMAN> backup database include current controlfile;
    3.RMAN> alter database open;
    I aim to create the new database called DEMO using this backup
    Please let know the setps for creating new databaseIf it is in archivelog mode you can use duplicate to refresh database DEMO from TEST..
    or after cold backup, go to mount ,
    create trace file of controlfile becuase you are chaning database name
    recreate the controlfile
    open database in resetlogs;
    check also http://blogs.oracle.com/AlejandroVargas/gems/RMANDUPDBPRACTICE.pdf

  • Cloning a database using rman where source's dbid changed..

    Any idea on how to .. cloning a database using rman where source's dbid changed..

    if you need to change dbid of target then use DUPLICATE command, see the below links.
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1008888
    http://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php

  • Standby database using RMAN.

    Hi All,
    Please provide me complete steps to create standby database using RMAN.
    Regards.

    http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377

Maybe you are looking for

  • Safari and Firefox seem to have been hijacked

    Safari and Firefox seem to have been hijacked. When I type hotmail it takes me to some netgear wn2500rp genie. Help!

  • How to consume OData service in  sapui5

    hi,     how to consume Odata service  in sapui5 (table).   If any idea  please share with me.

  • Fit columns in Numbers?

    I imported a csv file into numbers for iPad. I changed the font size to make it more readable. With the larger font text no longer fits the current width of the column(s). How do I make the text "fit" the columns without manually adjusting the width

  • CE -Portal page not found !!!!

    Hi, I 've installed latest CE on my box. I couldn't able to start my portal page. I am getting  Error: The requested resource does not exist when I use the URL http://localhost:50000/irj/portal  !!!! My instllation was successful.Do I need to do any

  • CC Org Rules usage

    Hi experts, i just want to have a quick check on who have implemented Org Rules in any of their implementation. In a big Organization where staff are in charge of cross department or region, we need to eliminate false positive. One way is to determin