Unable to retrieve nametab info for logic table BSEG during Database Export

Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
Sunil

Hello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael

Similar Messages

Unicode Export - unable to retrieve nametab info for logic table BSEG

Hi
We are performing a unicode export (CUUC from 4.6C upgrade to ECC 6.0) and we have incurred this error.
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
Our OS is HPUX11.31 & Database is 10.2.0.2
myCluster (63.21.Exp): 1610: inconsistent settings for table position validity detected.
myCluster (63.21.Exp): 1611: nametab says table positions are valid.
myCluster (63.21.Exp): 1614: alternate nametab says table positions are not valid.
myCluster (63.21.Exp): 1617: for field 310 of nametab displacement is 1877, yet dbtabpos shows 1885.
myCluster (63.21.Exp): 1621: character length is 1 (in) resp. 2 (out).
myCluster (63.21.Exp): 1257: unable to retrieve nametab info for logic table BSEG      .
myCluster (63.21.Exp): 8358: unable to acquire nametab info for logic table BSEG      .
myCluster (63.21.Exp): 2949: failed to convert cluster data of cluster item.
myCluster: RFBLG      *400**AT10**0000100000**2004*
myCluster (63.21.Exp): 322: error during conversion of cluster item.
myCluster (63.21.Exp): 323: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/SBX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SBX/SYS/exe/run/R3load: END OF LOG: 20081102104452
We checked the note 913783 as per the CUUC guide but the correction only for package SAPKB70004 to 6. but we are in package SAPKB70011.
We had found two notes:
1. Note 1238351 - Hom./Het.System Copy SAP NW 7.0 incl. Enhancement Package 1
:Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to thisline.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is(re-)started.
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines. "
I tried the above solution by editing the file DDL*.TPL but it is skipping the table and marks it as completed but its not the good solution as we will be miss the data from the table RFBLG.
2. Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion:
Solution
Activate the table.
Then call the RADCUCNT report. Do not change the selected parameters, but ensure that 'Overwrite Entries' is selected. Set the 'Unicode Length' to 2 and fill the last two fields 'Type' and 'Name' with TABL and TACOPAB respectively. Then select 'No Log' or specify a log name.
Execute the RADCUCNT report and restart the export.
We have not tried this solution, bcos SAP is still down and CDCLS job is still running.
We would like to know whether you have faced any issues like the above one and what is your suggested approach and solution.
Is it safe to start SAP now (when the CDCLS job runs) and then try to activate the table RFBLG?
Regards
Senthil
Edited by: J. Senthil Murugan on Nov 3, 2008 1:41 AM
Edited by: J. Senthil Murugan on Nov 3, 2008 3:36 AM

Hi Senthil,
If you have done your pre-conversion steps before upgrade and after upgrade successfully then you should not see the below errors. However changes to SPDD tables may some times also have some impact during conversion and throws nametab errors occurs. Program RADCUCNT runs in the end of upgrade to update nametab tables if any new changes happned during upgrade.
You can do any no of exports to complete jobs successfully.yeah When export running you shouldnt bring SAP up.
The tables you have mentioned all are cluster tables and CDCLS being the biggest table it will take hrs to complete depending on your size of the database.
Do not pay around with the .TSK file until if you are sure you want to re-execute it.Your first possiblility is skipped because there may be multiple same .TSK files present locally(where u r running distribution.monitor (or) sapinst ) and on the common directory. You may also look at the .TSK.bkp files because it get information and creates a new .TSK. This is not complicated but tricky.
secound possibility is to update the changed tables(eg: RFBLG...) to conversion tables.Follow the Note but make sure no R3load processes are running before you start SAP. If you dont want to wait long and sure to restart other processes which are running you can kill it and start SAP. Specify your error tables only and follow instructions given in the note.Once done bring down SAP app. and restart the export process using ur sapinst or distribution monitor.
Regards,
Vamshi.

Unable to retrieve nametab info for logic table BSEG

Hi
We are performing a unicode export (CUUC from 4.6C upgrade to ECC 6.0) and we have incurred this error.
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
Our OS is HPUX11.31 & Database is 10.2.0.2
myCluster (63.21.Exp): 1610: inconsistent settings for table position validity detected.
myCluster (63.21.Exp): 1611: nametab says table positions are valid.
myCluster (63.21.Exp): 1614: alternate nametab says table positions are not valid.
myCluster (63.21.Exp): 1617: for field 310 of nametab displacement is 1877, yet dbtabpos shows 1885.
myCluster (63.21.Exp): 1621: character length is 1 (in) resp. 2 (out).
myCluster (63.21.Exp): 1257: unable to retrieve nametab info for logic table BSEG .
myCluster (63.21.Exp): 8358: unable to acquire nametab info for logic table BSEG .
myCluster (63.21.Exp): 2949: failed to convert cluster data of cluster item.
myCluster: RFBLG *400**AT10**0000100000**2004*
myCluster (63.21.Exp): 322: error during conversion of cluster item.
myCluster (63.21.Exp): 323: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/SBX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SBX/SYS/exe/run/R3load: END OF LOG: 20081102104452
We checked the note 913783 as per the CUUC guide but the correction only for package SAPKB70004 to 6. but we are in package SAPKB70011.
We had found two notes:
1. Note 1238351 - Hom./Het.System Copy SAP NW 7.0 incl. Enhancement Package 1
:Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to thisline.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is(re-)started.
search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines. "
I tried the above solution by editing the file DDL*.TPL but it is skipping the table and marks it as completed but its not the good solution as we will be miss the data from the table RFBLG.
2. Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion:
Solution
Activate the table.
Then call the RADCUCNT report. Do not change the selected parameters, but ensure that 'Overwrite Entries' is selected. Set the 'Unicode Length' to 2 and fill the last two fields 'Type' and 'Name' with TABL and TACOPAB respectively. Then select 'No Log' or specify a log name.
Execute the RADCUCNT report and restart the export.
We have not tried this solution, bcos SAP is still down and CDCLS job is still running.
We would like to know whether you have faced any issues like the above one and what is your suggested approach and solution.
Is it safe to start SAP now (when the CDCLS job runs) and then try to activate the table RFBLG?
Regards
Senthil
Edited by: J. Senthil Murugan on Nov 3, 2008 1:40 AM
Edited by: J. Senthil Murugan on Nov 3, 2008 3:37 AM

Dear Senthil
I had faced this issue earlier.
Table BSEG Requires activity in the ACT phase, like activation etc.
If we do the ACT phase using the transports and not perform manual activation of this table, this issue arrives.
Please share the relevant information--- seems some steps are missed out or not carried properly in the CU&UC phase.
Otherways, we had applied the solution Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion and it worked well..
But you need to be sure, that this table was changed(activated etc) during the Upgrade till export phase.
Issue is Nametab info is created during the Upgrade phase in CU&UC and if this table is touched, that nametab info is not getting it right as the runtime object is changed.
With RADCUCNT the nametab info will be created again.
All the Best
Best Regards
Deepak Dhawan

Unable to Retrieve Contact Info from synch server - Gator wrote to try renaming file but I can't manage to find the pathway on my Win 7 computer for that file! got as far as my name under user but can't get to application data. Can someone help?

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

I get this error : "content filter of a source for logical table" while I run the Global consistency check.

ERRORS:
Business Model DAC Measures:
[nQSError: 14031] The content filter of a source for logical table: D_END_TIME references multiple dimensions.
[nQSError: 15001] Could not load navigation space for subject area DAC Measures.
Thank you!

Yes ! My Task Hierarchy has 3 dimension tables that form a hierarchy :Execution Plan -> Tasks -> Detail
All the 3 levels in the hierarchy are 3 different dimension tables.

How do I run sp_spaceused for all tables in a database?

Hi,
I am struggling to understand how to run the sp_spaceused sproc for all tables in a database.
I know how to use it for one table but how would I replicate it automatically for each table in a given database?
Regards,
Ian.

I just managed to alter the code of VidyaSagar and have pulled out all the information including Schema name. Below is what it looks like:
set
nocount
on
select
'Database Name: ',
db_name
if
exists(select
name from tempdb..sysobjects
where name='##tmp'
drop
table ##tmp
create
table ##tmp(TABLE_SCHEMA
nvarchar(256),TABLE_NAME
nvarchar(256),
num_rows int,
reserved_KB varchar(15),data_KB
varchar(15),index_KB
varchar(15),unsed_KB
varchar(15
go
declare
@tbl_schema nvarchar(256
declare
@tbl_name nvarchar(256
declare
@schema_tbl_name nvarchar(256
declare
tblname CURSOR
for
select
TABLE_SCHEMA
TABLE_NAME
from
INFORMATION_SCHEMA.TABLES
where TABLE_TYPE='BASE
TABLE'
open
tblname
Fetch
next
from tblname
INTO @tbl_schema,@tbl_name
WHILE
@@FETCH_STATUS
= 0
BEGIN
set @schema_tbl_name=@tbl_schema+'.'+@tbl_name
insert
into ##tmp(TABLE_NAME
, num_rows
, reserved_KB
,data_KB
,index_KB
,unsed_KB
exec
sp_spaceused
@schema_tbl_name
update ##tmp
set TABLE_SCHEMA
=@tbl_schema
where TABLE_SCHEMA
is
NULL
and TABLE_NAME=@tbl_name
FETCH
NEXT
FROM tblname
INTO @tbl_schema,@tbl_name
END
CLOSE
tblname
deallocate
tblname
go
select
from
##tmp
drop
table ##tmp
Warm Regards, Ajay

Tables/Joins for logical tables being combined

I have 2 logical tables set up that have multiple physical table sources (using map to these tables). Some of the physical sources are the same in each logical table. It seems that when I make selections from Answers and look at the SQL, it is picking tables from both logical tables (instead of just the one I used). It is also grabbing the content (additional 'where condition') from the other logical table as well. Why is it doing that?

Yes it is kind of limitation in obiee. But there are some solutions which might deviate from best practices.
Sol 1. Snowflake the dimensions in Business Model. Rather than merging both of them into single logical table, separate them into two different logical tables.
Sol 2. For the logical table , have two LTSs. First LTS will have both tables and all columns mapped to both tables. Second LTS will have only main table, Columns belong to that table only mapped. In this way when you selected columns related to first source system will use second LTS which has only only one table.
- Madan Thota

Multiple sources for Logical Tables

The order of the sources in the logical table(in case of multiple sources) will it affect the query results??

Hi,
OBIEE pick the LTS using this algorithm:
1) every logical fact table is set to a dimension level, every level in the dimension has a number of elements at that level
2) OBIEE multiply for every LTS all the numbers of elements defined for a specific LTS
3) OBIEE pick the LTS that has the lower valure (like a cost of access, it picje the most aggregated table)
4) if there are multiple LTS with the same cost, OBIEE choses the first in order of defiition
Regards,
Gianluca

Unable to retrieve data from a nested table in Oracle 8i from JSP

How do i retrieve data from a nested table in Oracle 8i from my JSP code?
When i try to execute the query , a general error is thrown.
Kindly advice as soon as possible.

How do i retrieve data from a nested table in Oracle 8i from my JSP code?
When i try to execute the query , a general error is thrown.
Kindly advice as soon as possible.

Creating sequences for all tables in the database at a time

Hi ,
I need to create sequences for all the tables in my database.
i can create individually ,using toad and sqlplus.
Can any one give me a code for creating the sequences dynamically at a time for all the tables.
it is urgent ..
Regards.

I need to create sequences for majority of the tables that are having ID column
which is sequences."The majority" is not the same as all. So you probably want to drive your generation script off the ALL_TAB_COLUMNS view...
where column_name = 'ID'You need to think about this carefully. You might want different CACHE sizes or different INCREMENT BY clauses for certain tables. You might even (whisper it) want a sequence to be shared by more than one table.
Code generation is a useful technique, but it is a rare application where one case fits all.
Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

Downtime for logical or physical standby database

Hi ,
Are there any downtime required to refresh the data from the primary database to logical standby or physical standby database. What are the pros and cons of
using logical and physical standby database approach. which one is advisable to use in production environment.
Regards,
Richard

Hi Richard,
I'd suggest you read the documentation as a starting point, to answer your questions on here would be quite lengthy,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/toc.htm
In a nutshell you dont need downtime to maintain a standby, you can create them from a hot backup of your primary and get them recovering whilst it is open, in terms of which type of standby to use (physical or logical) that depends on your requirements for the use of the standby ... as I said read the doco (chapter 2 has a section on the benefits of each type).
HTH
Paul

IUUC_REPL_CONTENT - How to apply filters and replicate for Cluster tables BSEG/CDPOS

Hello Friends,
I have replicated the transparent tables by applying filters in IUUC_REPL_CONTENT but I know it's different for Cluster tables.
Does anyone replicated the BSEG or CDPOS ?
I need some inputs on this folks.
Thanks in advance.
Regards
Raja

May be this is helpful - http://scn.sap.com/community/replication-server/blog/2014/02/25/how-to-filter-on-the-initial-load-parallelize-replication

TM2-1100: Unable to set default rotation for slate/tablet mode

I have a brand new TM2 Tablet (2nd Generation).
When I put the screen into tablet/slate mode the display DOES automatically rotate, but it rotates 180 degrees, landscape rather than potrait.
I can press the bezel rotate button 4 times to eventually get it to the proper potrait orientation, but I have owned several other tablets and never had to do this... They always either rotated to portrait (90 or 270 degrees) automatically or allowed me to set how it would rotate when put in tablet/slate mode.
Googling this rotation issue found many similar complaints, even by major industry reviews of the TM2. Some people on the 1st generation TM2 were able to correct this by installing older HP Quick Launch Button software and changing the registery settings, but the second generation TM2 does not use that HP Quick Launch Button software.
I called HP and they basically said it was working as designed.
Has anyone found a solution to this? Granted, it's not a show-stopper but it is very annoying and it is basic tablet functionality that should work.
Thanks.

Same problem on my TM2-2150. not even 2 months old and already things are quitting.
The workaround I did that makes me less unhappy is as follows.
1. Check the intel video drivers for the screen orrientation hot-keys. Mine are Ctrl-Alt-Arrow (direct to top of screen)
2. Enable Penflicks in all directions
3. Pick the screen orientation you want to use in tablet mode. ( Mine turns the screen clockwise)
4. Change one of the directional pen-flicks to a custom key command coresponding to the keyboard shortcut to change screen orientation.
5. Change the directional 90 degrees away (anti-clockwise in my case) to the key command to revert the screen back.
now the direction you picked on the screen toggles the orientation of the screen between landscape and tablet mode. It's not ideal, but it is workable.

I can no longer sync iphone and ipad - 'cannot access conflicts' unable to retrieve conflict info from sync server' - any ideas please? Previous enquirer with this didn't seem to find an answer?

anybody found this and got the answer? both ipad and iphone used to be ok, just started happening last couple of months.
See from communities question that I'm not the only one, but don't seem to be able to find solution posted anywhere.
It's really annoying cos now ipad, iphone and outlook are all saying they don't match appointments and contacts - aaaarrrgghhhh!

Here is the solution.
Rationale: You want to be able to have the dates on your items (notes, contacts) on your iphone to be the same as on outlook. This will eliminate any sync conflicts. You will also notice that if you modify something on the iphone and sync, you will lose the modification you made.
Steps:
1) In outlook, export the data (contacts, notes) to a CSV file
2) Delete you notes/contacts in outlook
3) Sync your iphone and select replace information on this iPhone (in iTunes)
4) Now your contacts and notes will be empty on both your iPhone and Outlook
5) Now import your contacts and notes from the CSV files back into outlook. What this does is put the current date and time on every individual item
6) Sync your iPhone to iTunes normally
7) everything will work correctly now with no sync issues and no conflicts.
Sherali

Retrieve Certificate Info for dual-signed SHA1/SHA256

With SHA1 being deprecated we're starting to see files with multiple digital signatures (like msvcr120.dll). I have code that uses the crypto API (CryptQueryObject, CryptGetMsgParam, CryptMsgOpenToDecode, CryptMsgUpdate, etc.) to get certificate information
from the signature.
The problem is that I don't see two signatures. It appears there's only one message with one signer. Is there an updated API I should be using? How is this modeled internally; is it multiple messages, multiple signers, or a single
signature with multiple certificates?
In Windows 8 and Server 2012 I can see both signatures in the properties and see there are two separate certificates, one using a sha1 digest and the other using a sha256. How do I acquire that information programmatically?

Have you tried
ImageEnumerateCertificates?

Unable to retrieve nametab info for logic table BSEG during Database Export

Similar Messages

Maybe you are looking for