Multiple sources for Logical Tables

The order of the sources in the logical table(in case of multiple sources) will it affect the query results??

Hi,
OBIEE pick the LTS using this algorithm:
1) every logical fact table is set to a dimension level, every level in the dimension has a number of elements at that level
2) OBIEE multiply for every LTS all the numbers of elements defined for a specific LTS
3) OBIEE pick the LTS that has the lower valure (like a cost of access, it picje the most aggregated table)
4) if there are multiple LTS with the same cost, OBIEE choses the first in order of defiition
Regards,
Gianluca

Similar Messages

What is the use of Multiple source in Logical Table under BMM Layer?

what is the use of Multiple source in Logical Table under BMM Layer?
thanks in advance

Or more generally speaking:
To create a "logical table" consisting of multiple "physical tables"...hence the names. It's the backbone of the whole BI server concept and the way the rpd handles the requests.
I.e.: how would you otherwise proceed for making an analyzable table from SAP, Teradata, Oracle and a flat file with no full change-access to all the data sources?

I get this error : "content filter of a source for logical table" while I run the Global consistency check.

ERRORS:
Business Model DAC Measures:
[nQSError: 14031] The content filter of a source for logical table: D_END_TIME references multiple dimensions.
[nQSError: 15001] Could not load navigation space for subject area DAC Measures.
Thank you!

Yes ! My Task Hierarchy has 3 dimension tables that form a hierarchy :Execution Plan -> Tasks -> Detail
All the 3 levels in the hierarchy are 3 different dimension tables.

Building Views vs Multiple sources as Logical tables

I am building logical tables that could have many physical sources. Is there any benefit to making a single view and using it as a single source?

hi,
Always is better to do things in database,for many reasons....
1.performance
2.maintenace....
My opinion is better to do a final fact table which contains data from all the sources..and use this table as your fact table in the bussiness solution.not view,not many sources.You can make aggregates tables,put indexes and in generall is more simple and it contains all the benefits of a STAR SCHEMA..
hope i helped...
http://greekoraclebi.blogspot.com/

Incorrectly defined logical table source (for fact table X

Hi!
Imagine the following Physical Diagram:
- Dim A
- Dim B
- Fact A
- Fact B
Joins:
- Dim A is parent of Dim B
- Fact B has a FK to Dim B
- Fact A has a FK to Dim A
Business Layer:
- Logical Table Dim A
- Logical Table Dim B
- Logical Table Fact A
- Logical Table Fact B
Joins:
- same joins (not FK Joins) that Physical Layer
When we build a report that only has one column of Dim A and one column of Dim B (A is parent of B), the following error appears:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table "Fact A") does not contain mapping for [Dim A.col1, Dim B.col1]. (HY000)
What is wrong?
Help!
Thanks.

Hi,
The joins of dimensions go via a fact table. In your case there is no common fact table.
You can solve this by drag/drop a field from the physical table Dim B on the displayed logical table source of the logical table Dim A.
Now the BI Server knows that Dim A and B have a physical relationship.
Regards

Incorrectly defined logical table source (for fact table Facts) does not

Hi,
I have two Dimensions A and B. A is joined to B by a foreign Key.
The report works if I pull B. Column1, A.Column2.
The report is throwing an error if i try to change the order of the columns like this. A.Column2, B. Column1.
error : Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
File: odbcstatementimpl.cpp, Line: 186
State: S1000. Code: 10058. [NQODBC] [SQL_STATE: S1000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Facts) does not contain mapping for B.Column1
I am not sure where it is going wrong.
Thanks
jagadeesh
Edited by: Jagadeesh Kasu on Jun 16, 2009 4:22 PM

did you make joins in LTS or on the physical table.
try to make join in LTS if they are not there.

Unicode Export - unable to retrieve nametab info for logic table BSEG

Hi
We are performing a unicode export (CUUC from 4.6C upgrade to ECC 6.0) and we have incurred this error.
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
Our OS is HPUX11.31 & Database is 10.2.0.2
myCluster (63.21.Exp): 1610: inconsistent settings for table position validity detected.
myCluster (63.21.Exp): 1611: nametab says table positions are valid.
myCluster (63.21.Exp): 1614: alternate nametab says table positions are not valid.
myCluster (63.21.Exp): 1617: for field 310 of nametab displacement is 1877, yet dbtabpos shows 1885.
myCluster (63.21.Exp): 1621: character length is 1 (in) resp. 2 (out).
myCluster (63.21.Exp): 1257: unable to retrieve nametab info for logic table BSEG      .
myCluster (63.21.Exp): 8358: unable to acquire nametab info for logic table BSEG      .
myCluster (63.21.Exp): 2949: failed to convert cluster data of cluster item.
myCluster: RFBLG      *400**AT10**0000100000**2004*
myCluster (63.21.Exp): 322: error during conversion of cluster item.
myCluster (63.21.Exp): 323: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/SBX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SBX/SYS/exe/run/R3load: END OF LOG: 20081102104452
We checked the note 913783 as per the CUUC guide but the correction only for package SAPKB70004 to 6. but we are in package SAPKB70011.
We had found two notes:
1. Note 1238351 - Hom./Het.System Copy SAP NW 7.0 incl. Enhancement Package 1
:Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to thisline.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is(re-)started.
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines. "
I tried the above solution by editing the file DDL*.TPL but it is skipping the table and marks it as completed but its not the good solution as we will be miss the data from the table RFBLG.
2. Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion:
Solution
Activate the table.
Then call the RADCUCNT report. Do not change the selected parameters, but ensure that 'Overwrite Entries' is selected. Set the 'Unicode Length' to 2 and fill the last two fields 'Type' and 'Name' with TABL and TACOPAB respectively. Then select 'No Log' or specify a log name.
Execute the RADCUCNT report and restart the export.
We have not tried this solution, bcos SAP is still down and CDCLS job is still running.
We would like to know whether you have faced any issues like the above one and what is your suggested approach and solution.
Is it safe to start SAP now (when the CDCLS job runs) and then try to activate the table RFBLG?
Regards
Senthil
Edited by: J. Senthil Murugan on Nov 3, 2008 1:41 AM
Edited by: J. Senthil Murugan on Nov 3, 2008 3:36 AM

Hi Senthil,
If you have done your pre-conversion steps before upgrade and after upgrade successfully then you should not see the below errors. However changes to SPDD tables may some times also have some impact during conversion and throws nametab errors occurs. Program RADCUCNT runs in the end of upgrade to update nametab tables if any new changes happned during upgrade.
You can do any no of exports to complete jobs successfully.yeah When export running you shouldnt bring SAP up.
The tables you have mentioned all are cluster tables and CDCLS being the biggest table it will take hrs to complete depending on your size of the database.
Do not pay around with the .TSK file until if you are sure you want to re-execute it.Your first possiblility is skipped because there may be multiple same .TSK files present locally(where u r running distribution.monitor (or) sapinst ) and on the common directory. You may also look at the .TSK.bkp files because it get information and creates a new .TSK. This is not complicated but tricky.
secound possibility is to update the changed tables(eg: RFBLG...) to conversion tables.Follow the Note but make sure no R3load processes are running before you start SAP. If you dont want to wait long and sure to restart other processes which are running you can kill it and start SAP. Specify your error tables only and follow instructions given in the note.Once done bring down SAP app. and restart the export process using ur sapinst or distribution monitor.
Regards,
Vamshi.

Unable to retrieve nametab info for logic table BSEG during Database Export

Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
Sunil

Hello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael

Data source for crm table CRMD_ORDERADM_I

hi experts,
could you please tell me the standard data source for crm table CRMD_ORDERADM_I ?
Thanks a lot!

Hi,
There would be many data sources based on this table CRMD_ORDERADM_I.
Example.
Opportunity Item Attributes - 0CRM_OPPT_ATTR_I
Bids - 0BBP_TD_QUOT_1
Depends What exactly are you looking for.
Regards,
Joe

Unable to retrieve nametab info for logic table BSEG

Hi
We are performing a unicode export (CUUC from 4.6C upgrade to ECC 6.0) and we have incurred this error.
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
Our OS is HPUX11.31 & Database is 10.2.0.2
myCluster (63.21.Exp): 1610: inconsistent settings for table position validity detected.
myCluster (63.21.Exp): 1611: nametab says table positions are valid.
myCluster (63.21.Exp): 1614: alternate nametab says table positions are not valid.
myCluster (63.21.Exp): 1617: for field 310 of nametab displacement is 1877, yet dbtabpos shows 1885.
myCluster (63.21.Exp): 1621: character length is 1 (in) resp. 2 (out).
myCluster (63.21.Exp): 1257: unable to retrieve nametab info for logic table BSEG .
myCluster (63.21.Exp): 8358: unable to acquire nametab info for logic table BSEG .
myCluster (63.21.Exp): 2949: failed to convert cluster data of cluster item.
myCluster: RFBLG *400**AT10**0000100000**2004*
myCluster (63.21.Exp): 322: error during conversion of cluster item.
myCluster (63.21.Exp): 323: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/SBX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SBX/SYS/exe/run/R3load: END OF LOG: 20081102104452
We checked the note 913783 as per the CUUC guide but the correction only for package SAPKB70004 to 6. but we are in package SAPKB70011.
We had found two notes:
1. Note 1238351 - Hom./Het.System Copy SAP NW 7.0 incl. Enhancement Package 1
:Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to thisline.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is(re-)started.
search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines. "
I tried the above solution by editing the file DDL*.TPL but it is skipping the table and marks it as completed but its not the good solution as we will be miss the data from the table RFBLG.
2. Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion:
Solution
Activate the table.
Then call the RADCUCNT report. Do not change the selected parameters, but ensure that 'Overwrite Entries' is selected. Set the 'Unicode Length' to 2 and fill the last two fields 'Type' and 'Name' with TABL and TACOPAB respectively. Then select 'No Log' or specify a log name.
Execute the RADCUCNT report and restart the export.
We have not tried this solution, bcos SAP is still down and CDCLS job is still running.
We would like to know whether you have faced any issues like the above one and what is your suggested approach and solution.
Is it safe to start SAP now (when the CDCLS job runs) and then try to activate the table RFBLG?
Regards
Senthil
Edited by: J. Senthil Murugan on Nov 3, 2008 1:40 AM
Edited by: J. Senthil Murugan on Nov 3, 2008 3:37 AM

Dear Senthil
I had faced this issue earlier.
Table BSEG Requires activity in the ACT phase, like activation etc.
If we do the ACT phase using the transports and not perform manual activation of this table, this issue arrives.
Please share the relevant information--- seems some steps are missed out or not carried properly in the CU&UC phase.
Otherways, we had applied the solution Note 991401 - SYSCOPY EXPORT FAILS:SAPCLUST:ERROR: Code page conversion and it worked well..
But you need to be sure, that this table was changed(activated etc) during the Upgrade till export phase.
Issue is Nametab info is created during the Upgrade phase in CU&UC and if this table is touched, that nametab info is not getting it right as the runtime object is changed.
With RADCUCNT the nametab info will be created again.
All the Best
Best Regards
Deepak Dhawan

Multiple sources for trusted reconciliation

Hi All,
Is it possible to have multiple trusted source in OIM . such as I have to different application (1)end-user and (2)support. Both type of user need to created OIM.
When I do the recon. on support after recon of end-user . I find that users from end-user are deleted.
I am doing trusted recon.
Am I missing anything and how we can support multiple source for trusted recon.
Cheers

Hi,
I know you can have multiple trusted sources, as long as you normalize the attributes on the way in.
I have seen an implementation with multiple trusted sources that provide the information for different attributes, as well as the same (for example, employees can change their own name in one application, HR can change it in PSFT, but PSFT is also authoritative for PSFT number). Since the First Name and Last Name can be touched by both, when the reconciliation connectors/adapters push the data into the recon engine, the attributes are named the same from both places.
You can go into the organization of the users, find the Xellerate User process for the deleted users and find out what triggered the deletion. I have no idea what is doing it...
Some ideas: if you are using the AD adapter and have Delete Recon turned on, and are doing a trusted recon, then you might get into conflicts between the users. Other adapters don't have Delete Recon, so they won't do this. I haven't looked into the new generic connector, so I am not sure if it does this as well.
Also, you can look at the data coming in from the recons in the Design Console's Reconciliation Manager. This might give you a hint as to why things are getting deleted.
Also, since I haven't played with 9.0.3 yet, it might just be a bug (I just finished my installation though and will be doing recons next week and see -- i have multiple trusted sources).
Hope this helps,
Deb

Tables/Joins for logical tables being combined

I have 2 logical tables set up that have multiple physical table sources (using map to these tables). Some of the physical sources are the same in each logical table. It seems that when I make selections from Answers and look at the SQL, it is picking tables from both logical tables (instead of just the one I used). It is also grabbing the content (additional 'where condition') from the other logical table as well. Why is it doing that?

Yes it is kind of limitation in obiee. But there are some solutions which might deviate from best practices.
Sol 1. Snowflake the dimensions in Business Model. Rather than merging both of them into single logical table, separate them into two different logical tables.
Sol 2. For the logical table , have two LTSs. First LTS will have both tables and all columns mapped to both tables. Second LTS will have only main table, Columns belong to that table only mapped. In this way when you selected columns related to first source system will use second LTS which has only only one table.
- Madan Thota

Multiple sources for address book

Is there a way to keep different sources for addresses separate and discrete in Address Book? For instance, we have our own addresses from iCloud, but I also have addresses coming from Google Mail. We've worked hard to keep the iCloud ones updated and "clean", whereas the Google Mail ones are a bit messier. Is there a way to keep them distinct when importing/subscribing from Address Book? Or, does all the information end up getting merged?
Thanks,
John

Hi,
Pete_Sg1 wrote:
I need to write a query whiich returns book details but it should identify records (ie. Titles) with multiple authors and return the record with Authors separated with pipe ('|') like (no need of SURRID column )Get there : {message:id=9360005}
and scroll down to "string aggregation"
Pete_Sg1 wrote:
A table storing book details can only be designed like above. Right ? I mean, the duplication of records for one book because of multiple authors cannot be avoided. Right ? I would have had a table for books, and a separate one for authors, and a 3rd one for their relations :
create table books
book_id integer,
title varchar2(100),
etc...
create table authors
author_id integer,
name varchar2(100),
etc...
create table book_authors
book_id integer,
author_id integer
);You could also have only 2 tables book and authors (with authors table having a fk column to book_id).
It would depends if the author is supposed to remain unique throught different books.
- The 3 tables model would allow a single update on author information to be automatically "propagated" to all book he participed in.
- The 2 tables model would allow to have different information for each participation of the author to different books (but would certainly "duplicate" part of the data about the author)
One can also have even more tables to totally avoid data "duplication".

Standard Data Source for FMGLFLEXT Table

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello Sasi and Kirun,
Thanks for your reply,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

Data source for ECMCT table

hi,
can some one tell me the data source we should use for extracting data from ECMCT table?
the potential data source we identified is 3EC_CS1A but there is no documentation available on this data source.
could you documentation provide us the supporting docs or note no?
thanks in advance!!!
NA

Hi Samir,
welcome on board !
Take a look here:
http://help.sap.com/saphelp_nw04/helpdata/en/6c/4d6637a04c2367e10000009b38f8cf/content.htm
Hope it helps!
(and please don't forget to reward the answers..it's a way to say thanks !)
Bye,
Roberto

Multiple sources for Logical Tables

Similar Messages

Maybe you are looking for