Unable to retrieve topology component health states

Hi,
SharePoint 2013 SP1 + Sep 2014 CU and SQL Server 2012 SP1
i have created search service application using power shell and also using central administration but both times i am getting following error message when access search service application.
Unable to retrieve topology component health states. This may be because the admin component is not up and running
Pls guide how to fix it
thx
iffi

Hi Imughal,
This issue can be caused by many reasons, please check ULS log for detailed error message.
If the issue is caused by Event ID: 6482 error “A call to SSPI failed, see inner exception”, then
it can be caused by the following reasons:
The timer service account is trying to communicate with HostController service and generates 'SSPI Connect' call demanding SPN to be created for target services Identity, if no SPN is found.
The Hostcontroller service's NodeRunner process is limited to use restricted amount of RAM.
Then please follow the steps in the link below for solving this issue:
http://blogs.msdn.com/b/bkr_sharepoint/archive/2014/06/09/sharepoint-2013-search-topology-activation-error-quot-unable-to-retrieve-topology-component-health-states-this-may-be-because-of-the-admin-component-is-not-up-and-running-quot.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Unable to retrieve topology component health states. This may be because the admin component is not up and running.

Unable to retrieve topology component health states. This may be because the admin component is not up and running.
I have deleted Search Service App and created again.
But still same error can anyone give me check list.. I need it very urgently.
Please reply
Thanks
Raj

Hi Raj,
This issue can be caused by many reasons, so please check the ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Here are some similar issues and the corresponding solutions for you take a look:
http://blogs.msdn.com/b/bkr_sharepoint/archive/2014/06/09/sharepoint-2013-search-topology-activation-error-quot-unable-to-retrieve-topology-component-health-states-this-may-be-because-of-the-admin-component-is-not-up-and-running-quot.aspx
http://blogs.msdn.com/b/sambetts/archive/2013/08/28/sp2013-win2012-unable-to-retrieve-topology-component-health-states-this-may-be-because-the-admin-component-is-not-up-and-running.aspx
http://techtrainingnotes.blogspot.com/2013/09/unable-to-retrieve-topology-component.html
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How Do I create a health state dashboard for a group of servers in SCOM 2012 R2

I am aiming to create a health state dashboard which would show the agent health for a particular group of server. But unable to find the option for the appropriate widget. Can somebody suggest how should I proceed on this?

There is state widget for show status of computer health or warning or critical
http://blogs.technet.com/b/antoni/archive/2013/05/13/operations-manager-2012-dashboard-widgets.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

DPS6: Unable to retrieve a backend SEARCH connection to process the search

I have installed and configured DPS 6 but I cannot get it to proxy through to our back-end Sun DS 5.2 servers. The error message I get is:
Error while reading entry [LDAP: error code 1 - Unable to retrieve a backend SEARCH connection to process the search request]As I am not familiar with the DP server I maybe making a simple mistake and would appreciate any pointers.
Background:
I have installed the DPS 6 on both a Windows 2000 SP4 server and on a Windows XP SP2 computer from the Sun Java Identity Management Suite v5 package.
I installed DS Core Server, DS EE Command-line utilities, and DPS Core Server and I selected "Configure manually after installation".
On the Win XP computer the installation path was:
              C:\Program Files\Sun\JavaES5I ran the following commands to set-up and configure the server:
     dpadm create -p 389 -P 636 C:\Program Files\Sun\JavaES5\ldap-proxy
     dpadm enable-service --type WIN_SERVICE C:\Program Files\Sun\JavaES5\ldap-proxy
     dpadm start C:\Program Files\Sun\JavaES5\ldap-proxy
     dpconf create-ldap-data-source Sun1 directory1.example.com:636
     dpconf create-ldap-data-source Sun2 directory2.example.com:636
     dpconf list-ldap-data-sources
       Sun1
       Sun2
     dpconf create-ldap-data-source-pool Sun_internal
     dpconf attach-ldap-data-source Sun_internal Sun1 Sun2
     dpconf list-attached-ldap-data-sources Sun_internal
       Sun1
       Sun2
     dpconf create-ldap-data-view Customer_data_r/w Sun_internal ou=Customers,dc=example,dc=com
     dpconf create-ldap-data-view Partner_data_r/w Sun_internal ou=Partners,dc=example,dc=com
     dpconf create-ldap-data-view Staff_data_r/w Sun_internal ou=Staff,dc=example,dc=com
     dpconf set-ldap-data-source-prop Sun1 is-enabled:true
     dpconf set-ldap-data-source-prop Sun2 is-enabled:true
     dpconf set-attached-ldap-data-source-prop Sun_internal Sun1 search-weight:100
     dpconf set-attached-ldap-data-source-prop Sun_internal Sun2 search-weight:200
     dpadm restart C:\Program Files\Sun\JavaES5\ldap-proxyI have now been scratching my head over this for several days, and I have installed and re-installed the server several times on the different computers. I have also had a problem registering the DPS with a remote DSCC; checking the cacaoadm I see:
     cacaoadm status
       default instance is ENABLED at system startup.
       default instance is not running.
     cacaoadm start
     cacaoadm status
       default instance is ENABLED at system startup.
       Current retries count : 1/4
       Processes:
       2452
       Cannot connect to agent: Unsupported protocol: jmxmp
     cacaoadm verify-configuration
       CONFIG ERROR   : Java Dynamic Management Kit home is not valid, Cannot locate [lib] inside [C:\DOCUME~1\ADMINI~1].Any help that can be given will be greatly appreciated; thanks

Hi,
The error message indicates (not very clearly I agree) that DPS could handled the request but could not contact the appropriate Directory Server (no connection).
There are several possible reasons for this.
First is directory1.example.com a valid fully qualified domain name on your machine. I.e. does this name resolve into an IP address ?
Second the host:port used for directory1.example.com is 636 which is the default secure LDAP port. This implies that you probably wanted to have a secure connection between DPS and the Directory Servers.
Well, dpconf has no way to specify that the port is intended to be a secure one. And will always consider that the port specified is the regular LDAP port. (I opened a bug about this and I hope it'll be fixed in 6.1).
Secure connections and information must be configured afterward.
To configure SSL between DPS and an ldap-data-source, please refer to the Administration Guide : <http://docs.sun.com/app/docs/doc/819-0995/6n3cq3b3q?a=view>
As for the jmxmp issue, it looks like the JDMK component on Windows was not installed. Did you install it with an Administrative account ?
Could you try to uninstall and re-install ?
Regards,
Ludovic.

ORA-28545: error diagnosed by Net8 when connecting to an agent Unable to retrieve text of NETWORK/NCR message 65535

Hello All,
I have verified entire otn community, but none of the solution working for me and hence posting this problem. I'm getting below error message when I try to connect from oracle 11g to sqlserver database. All details are given below and request some body to provide resolution.
Oracle 11 g server installed in "Red Hat Enterprise Linux Server release 6.3"
Sqlserver running in Windows server enterprise 64bit OS.
$ cat initdg4msql.ora
# This is a customized agent init file that contains the HS parameters
# that are needed for the Database Gateway for Microsoft SQL Server
# HS init parameters
HS_FDS_CONNECT_INFO=[SJCGNMWQA2WEB01]:SQLEXPRESS//msdb
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
$ cat listener.ora
# listener.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
     (SID_NAME = dg4msql)
     (ORACLE_HOME = /home/oracle/11g/product/11)
     (PROGRAM = dg4msql)
$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /home/oracle/11g/product/11/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
GNMDB =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = GNMDB)
dg4msql =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
    (CONNECT_DATA = (SID = msdb))
    (HS = OK)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = sjcgnm62v2db1.skta.com)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = /home/oracle/11g
Output of lsnrctl start
$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 22-NOV-2013 15:17:08
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Starting /home/oracle/11g/product/11/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.3.0 - Production
System parameter file is /home/oracle/11g/product/11/network/admin/listener.ora
Log messages written to /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                22-NOV-2013 15:17:08
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /home/oracle/11g/product/11/network/admin/listener.ora
Listener Log File         /home/oracle/11g/diag/tnslsnr/sjcgnm62v2db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sjcgnm62v2db1.skta.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
SQL> CREATE PUBLIC DATABASE LINK sqlserver CONNECT TO "sa" IDENTIFIED BY "gnm123" USING 'dg4msql';
Database link created.
SQL> select * from dual@sqlserver;
select * from dual@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
SQL> select * from "sys"."tables"@sqlserver;
select * from "sys"."tables"@sqlserver
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from SQLSERVER
Pl help.

Hi Klaus,
I just pick the gateway 11.2.0.3 patch to the installation. Here I got error and patch installation failed.
[oracle@sjcgnm62v2db1 13092292]$ opatch apply
Invoking OPatch 11.2.0.1.7
Oracle Interim Patch Installer version 11.2.0.1.7
Copyright (c) 2011, Oracle Corporation. All rights reserved.
Oracle Home       : /home/oracle/11g/product/11
Central Inventory : /home/oracle/oraInventory
   from           : /etc/oraInst.loc
OPatch version    : 11.2.0.1.7
OUI version       : 11.2.0.3.0
Log file location : /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Applying interim patch '13092292' to OH '/home/oracle/11g/product/11'
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 13092292: Required component(s) missing : [ oracle.rdbms.tg4db2, 11.2.0.3.0 ]
[ Error during Prerequisite for apply Phase]. Detail: ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
Log file location: /home/oracle/11g/product/11/cfgtoollogs/opatch/opatch2013-11-26_12-41-27PM.log
Recommended actions: This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.
OPatch failed with error code 39
[oracle@sjcgnm62v2db1 13092292]$
Pl help.

CVU ERROR:Unable to retrieve database release version

Hi all, I want to install RAC on three nodes,but when I run "cluvfy" as ORACLE user, I got errors:
./runcluvfy.sh stage -pre crsinst -n nrac1,nrac2,nrac3 -verbose
ERROR:
Unable to retrieve database release version.
Verification cannot proceed.
but the ROOT user can run it with few errors , why?
how can I do ?

I was getting this same mysterious error immediately after a successful CRS install. The command I was running was "runcluvfy.sh stage -pre dbinst -n node1" from my stage directory. All previous executions worked correctly. My thought now is that the CRS install added JRE files that interrupt its paths; still not sure though.
The MetaLink article referenced above was very helpful in the end but only after I paid special attention to the wording at the very bottom. Originally, I dismissed the article because it is primarily for Solaris; while we are using Red Hat AS 4 update 5. However, in the very last sentence it states the following:
"Note: If you encounter same error for cluvfy stage -pre crsinst -n node on Linux x86-64 platform before CRS installation, please check if jdk 1.5 is installed. cluvfy works with jdk 1.4. Please install jdk 1.4 or install CRS and run cluvfy from CRS installation."
Ah, we had also installed JSE 6. And sure enough executing 'java -version' showed that it was picking up the path to JSE 6 not the 1.4.
So, following the note in the above article, I did two things. First, I changed the CV_HOME variable to $ORACLE_HOME/bin and ran 'which cluvfy' to verify the correct location. Second, I executed "cluvfy.sh stage -pre dbinst -n node1". It worked!

ConfigMgr 2007 Management Point Health: State

I am getting this, how to fix this issue. SCOM 2012
Any body knows the triage to fix this issue
Manjish

Hi,
Verify that the SMS Agent service is running.
Check the MPControl.log file and component status for MP_CONTROL_MANAGER for more details.
ConfigMgr 2007 Management Point Health: State Rule
http://mpwiki.viacode.com/default.aspx?g=posts&t=119435
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141

Unable to Retrieve Contact Info from synch server - Gator wrote to try renaming file but I can't manage to find the pathway on my Win 7 computer for that file! got as far as my name under user but can't get to application data. Can someone help?

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

VLD-1119: Unable to generate Multi-table Insert statement for some or all t

Hi All -
I have a map in OWB 10.2.0.4 which is ending with following error: -
VLD-1119: Unable to generate Multi-table Insert statement for some or all targets.*
Multi-table insert statement cannot be generated for some or all of the targets due to upstream graphs of those targets are not identical on "active operators" such as "join".*
The map is created with following logic in mind. Let me know if you need more info. Any directions are highly appreciated and many thanks for your inputs in advance: -
I have two source tables say T1 and T2. There are full outer joined in a joiner and output of this joined is passed to an expression to evaluate values of columns based on
business logic i.e. If T1 is available than take T1.C1 else take T2.C1 so on.
A flag is also evaluated in the expression because these intermediate results needs to be joined to third source table say T3 with different condition.
Based on value taken a flag is being set in the expression which is used in a splitter to get results in three intermediate tables based on flag value evaluated earlier.
These three intermediate tables are all truncate insert and these are unioned to fill a final target table.
Visually it is something like this: -
T1 -- T3 -- JOINER1
| -->Join1 (FULL OUTER) --> Expression -->SPLITTER -- JOINER2 UNION --> Target Table
| JOINER3
T2 --
Please suggest.

I verified that their is a limitation with the splitter operator which will not let you generate a multi split having more than 999 columns in all.
I had to use two separate splitters to achieve what I was trying to do.
So the situation is now: -
Siource -> Split -> Split 1 -> Insert into table -> Union1---------Final tableA
Siource -> Split -> Split 2 -> Insert into table -> Union1

XML Report completes with error due to REP-271504897: Unable to retrieve a string from the Report Builder message file.

We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.

Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards,

I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

I have two Major issues with our Infinity Project computers,
We have one entire lab that is getting this error... "Unable to load
block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll.
Please verify that the component exists and any dependencies it may
have are satisfied." It is also producing this error with
NumEntry.dll. Both files exist. I am not sure what
dependencies these files may have. Ideas?
We have several systems that are giving the following error on one of
our labs... "You have exceeded the number of block functions allowed by
VAB for Infinity; contact Hyperception regarding upgrades." From
what The professor here at UTA told me when I first took on this
project, this was a problem that we had on the previous boards and that
someone at Hyperception was able to help us resolve this problem.
Can you help out with these issues? The first one I need an answer today if possible.
Thanks,

We have seen this type of problem on some computers (we do not know why as of yet).The problem with missing blocks is very likely being caused by file permissions, and can be seen when non-administrators are using VAB software. To resolve this: 1. login as ADMINISTRATOR 2. run the command line script from a DOS prompt as shown below: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F It will scroll through the name of every file in the provided directory, and all subdirectories. This should reset every file, and allow the USER to access all files in VAB software. This should correct the problem. Regards,Steve

Unable to retrieve Object. Failed to load database information

I am getting the following error when trying to run my reports from Crystal XI with SQL Server 2005.
CrystalReportViewer
Error in File 180+DAYREP.EWARP: Failed to load database information.
Unable to retrieve Object.
Error in File 180+DAYREP.EWARP: Failed to load database information.
I have done some research on this but no luck on resolving the issue.
Any suggestions are welcome thanks.

First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
I tried to ping my database and was unable to find the host. I was under the assumption it was using TNSNames which is able to resolve.
How can I validate the permissions?
As I said I'm a little lost here. Apologies if I ask stupid questions.

Unable to retrieve nametab info for logic table BSEG during Database Export

Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
Sunil

Hello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael

Unable to retrieve tables from this connection

I have been using Dreamweaver for over 5 years. I have been
using an Access database and ASP the entire time. I am using a
Windows 2000 server for the database and web site. I have used
every verson of Dreamweaver since Ultra Dev. When I bought verson 8
and upgraded to 8.0.2, I began getting the following message when I
try to edit or create a recordset.
"Unable to retrieve tables from this connection, click on the
'Define...' button to test this connection."
I don't know what to do. Is this a widespread problem? Is it
a Windows problem? Is it a Dreamweaver problem? Is it a network
problem?
Please HELP!

Did you ever get an answer for this ?
I am having the same issue but using XP professional.

Unable to retrieve topology component health states

Similar Messages

Maybe you are looking for