Unable to run FIMPostInstallScriptsForDataWarehouse for FIM Reporting

Hi Everyone,
I am configuring FIM Reporting in which initially I installed scsm 2012 r2 which was not supported and after the uninstallation I installed scsm 2012 sp1,after the installation of scsm management server 2012 sp1 and dataware house when I am running the "FIMPostInstallScriptsForDataWarehouse"
script it says the following error message in the first screen and when I am trying to install the snappins then it says me to delete this existing files in the second screen.
My question is how and where should go I go and delete that exisiting snappins so that the script can run. please find the below screen shots
+

Hi,
Can you check payroll status of the mentioned employees in PA30. (IT0003)
See whether employee number has been locked for payroll or there are dates in the fields for retroactive calculation etc.
Regards;
Okan

Similar Messages

  • Unable to run payroll for two employees who rejoined the company.

    Dear Community,
    We are unable to run payroll for two employees who  have rejoined the company.
    Any guidance would be appreciated.
    Thanks in advance.

    Hi,
    Can you check payroll status of the mentioned employees in PA30. (IT0003)
    See whether employee number has been locked for payroll or there are dates in the fields for retroactive calculation etc.
    Regards;
    Okan

  • Hardware capability for FIM Reporting

    I am doing some capacity planning for a FIM 2010 R2 deployment and trying to understand the hardware requirements for the Reporting feature. Based on the diagarm below, it looks like the performance is primarily driven by two factors: System
    Center and SQL. Even the performance of System Center depends on SQL. So it all comes down to SQL horsepower. The rest of the servers (FIM, SCSM, SCDW) may not need much muscle power (I might be wrong though). What is your experience when planning
    for Reporting? What kind of challenges one can experience? Btw, I have a userbase of 100K and the change rate (# of requests per day) I am expecting is about 6%. What kind of hardware capacity would you recommend?
    Thanks!

    To start with, the picture is indeed really great … but it’s missing (or not emphasizing enough) one important component – SCSM’s Service Manager database.
    As for the capacity question, we've seen the biggest impact/load on the SCCM databases, both Service Manager and Data Warehouse (mainly DWStagingAndConfig) – so yes, SQL is what
    drives all that. Also, we haven’t tried SP1 yet, so what we observed was still on SCCM 2010.
    Anyway, here are few pointers from our experience:
    1. SCSM Service Manager DBs and Data Warehouse DBs should be installed on different SQL instances (has to do with the nature of the DBs) and preferably on different SQL servers.
    And ideally separately from other FIM component DBs.
    2. SCSM Service Manager DB can easily grow over twice the size of your FIMService DB (with indexes taking a lot of space), and it’s transaction log can quickly reach crazy sizes
    especially during initial load. This is the experience from running it just for few months, it might change after longer usage.
    3. From SCSM Data Warehouse DBs the only one you need to worry about is the DWStagingAndConfig. In our environment size wise it was comparable to FIM Service DB, but the observed
    IO during ETL jobs was just crazy – I’ve seen graphs of it generating 300-400MB/s read IO on a 150GB DB for over 10h straight (with plenty of RAM on the SQL box).
    4. Overall it seems like latency to the DB files is one of the main factors driving performance of FIM Reporting (not to mention IO) – even to a point where SAN storage might
    not be the best option here. Like Tomasz wrote, we were looking at setting up both SCSM components on two dedicated physical servers with local SQL and DBs on SSD drives … but didn’t get that far yet.
    When I’m writing about FIM Reporting performance I’m referring to a number of individual changes (queued in the ExportLog table in the FIM Service DB) that can be extracted from
    FIM Service to Service Manager in an hour – initially we were able to process below 200k records per hour, and after several tweaks, SAN reconfiguration, etc, we were almost able to double it. There isn’t any average correlation between number of requests
    and number of entries in the ExportLog table, it all depends on type of changes and how many are a part of individual requests. To just to give you an idea, we observed 20M records that were added over a 7 day period (avg 120k per hour), during which the only
    activity on FIM Service were approximately 20k SSPR registrations – highly customized (with confirmation emails flying around and some custom attributes being set), but still just SSPR. As you can imagine, with that level of activity we needed to push the
    processing rate way over what we were seeing as FIM Reporting was barely being able to catch up in real time.
    I hope this will be at least a bit helpful
    J.
    Piotr
    P.S. Oh, and by "we" I mean my previous company, I recently moved to Microsoft.

  • Run time for a Report

    Hi All,
    I have a requirement, where in i want to know whether my report has run for 8 mins or not. If it has run for 8 mins then i have to give an information message saying that the report is taking more than 8 mins so schedule the program in back ground.
    Is this possible ?
    Please let me know how to know during run time the time taken by a report.
    Regards
    Rakesh.

    Hi Dominic,
    The code you mentioned can be put to know what is the time taken by a select statement or the time taken by a particular piece of code. In my program there are several select queries and complex logics.. So i dont think that it is feesible to calculate the run time for each select and then if its increasing 8 mins then to show error !!!!
    My report will be called from an external application. If the program is taking much time it will get timed out. So for a precaution we have to tell them that the way you have given the selection screen filter values its going to take more than 8 mins so better schedule a back ground job.

  • Unable to install MHF1 for Crystal Report XI R2

    Post Author: glauzier
    CA Forum: Migration to XI R2
    Hi,
        at my office, we have Crystal Report XI and I need Crystal Report XI R2, so I download the package including sp2 and installed it. Then
    I download and tried to install MHF and got the error : "No supported XIR2 products detected". I followed the instructions given by the article c2010232 without any success.
    I sure I got the right MHF for the right software.
    I'm the admin of my pc.
    My pc is freshly formated, so there isn't any other version of CR on my pc.
    I can't find any services or process to shutdown.
    CR is installed only on my post, not on a server.
    I believe my registry is all right.
    I did install of Business Objects X1R2 sp1.
    Please Help.

    I have a license for Crystal XI on my desktop and that is all.
    We have licensing for BOE Repository to store and execute Crystal Reports. When I run a published Crystal Report the view panel in InfoView displays Crystal Report 2008 logo.
    Crystal Reports with UFL work on my machine because I can follow the documentation for Crystal Java UFL's (which is the same as the note you referenced), but that documentation is useless for BOE InfoView because Crystal Reports on the BOE InfoView server is entirely different.

  • How to terminate the running query for a report?

    Hi,
    When I run a report, the SQL query takes too long.
    This causes an overload on database.
    How do I stop query from running after some time?

    It is NOT possible in OBIEE 10g.
    In OBIEE 11g, When a scheduled report job is in running status, you can now cancel the running job from the Report Job History page.
    Check this Section 6.9, ["Canceling a Running Job." |http://docs.oracle.com/cd/E23943_01/bi.1111/e22257/view_manage_rpt_his.htm#cancel_runj]
    And only possible since 11.1.1.5
    regards
    Jorge
    p.s If this answers your question then please mark my answer as "Correct" or "Helpful"

  • Windows Limited User unable to run exp for dump taking purpose

    Dear Friends,
    We have an application which runs on Oracle 9i database and D2K forms and reports and the same is on Windows XP platform. The server PC is also the client.
    We want the windows limited users to run the application and take oracle export/dump back up. Problem is the forms application runs just fine whereas the dump cannot be taken from the Windows Limited User. Does any body know how to solve this?
    Rgds,
    Luther

    Luther wrote:
    Dear Friends,
    We have an application which runs on Oracle 9i database and D2K forms and reports and the same is on Windows XP platform. The server PC is also the client.
    We want the windows limited users to run the application and take oracle export/dump back up. Problem is the forms application runs just fine whereas the dump cannot be taken from the Windows Limited User. Does any body know how to solve this?
    Rgds,
    LutherBesides lack of error messages, what is a "windows limited user"?

  • Unable to run bapis for project status update and date update together

    Hi Experts,
    I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS   i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
    I have tried putting  a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
    Loop at itab.
    if  date_changed = 'X'.
          CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
          READ TABLE it_error WITH KEY message_type = c_e.
          IF sy-subrc <> 0.
    Commit
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                 EXPORTING
                      wait   = c_x
                 IMPORTING
                      return = s_ret.
       endif.
    endif.
    if Status_change = 'X'.
          CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
          CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
          READ TABLE t_result WITH KEY message_type = c_e.
          IF sy-subrc NE 0.
            CALL FUNCTION 'BAPI_PS_PRECOMMIT'
                 TABLES
                      et_return = t_ret.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                 EXPORTING
                      wait   = c_x
                 IMPORTING
                      return = s_ret.
         ENDIF.
    endif.
        WAIT UP TO 4 SECONDS.
    endloop.

    Try to use
    SET UPDATE TASK LOCAL.
    before each BAPI call.
    Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

  • Unable to run example for WSIF binding

    Hi,
    I am using BPEL 10.1.3.1 version.
    - I created Greeting.java, then from JDev generate WebService for class
    - in BPEL created one partner link using same wsdl file from local file system
    - put invoke activity to call this partner link
    - deployed process
    - copied all class file with package folder inside $ORACLE_HOME/bpel/system/classes folder
    When i initiate the process i get error
    Failed get wsdl service definition.
    Failed to get a WSDL service that support the portType "{http://BusinessProcess/}Greeting" in WSDL definition "{http://BusinessProcess/}Greeting".
    Please verify that WSDL portType "{http://BusinessProcess/}Greeting" is supported by a service in WSDL file.
    Please help.

    Hi Jack,
    How did you define the partnerlink to the webservice? Normally you can specify the the location of the wsdl-file and then this file is copied into your bpel project.
    Afterwards you can then just deploy the bpel project with the supported wsdl file within the project structure.
    Kind regards,
    Nathalie

  • FIM Reporting ETLScript PowerShell Script for SCSM 2012?

    Hi,
    The FIM Reporting Deployment Guide is great, however on a few occasions it forgets to mention where you meant to execute things (http://technet.microsoft.com/en-us/library/jj133855(v=ws.10).aspx) .
    For example, if it wasn't for the screenshot in the article, we would not have known that we need to run the ETLScript from the FIM Service/Portal server.
    Everything until the ETLScript has thus far worked; and we have deployed the Service Manager 2012 console on the FIM Service/Portal server (since we are using SCSM 2012 for FIM Reporting).
    However, it appears that the ETLScript (in the deployment guide) has been written for SCSM 2010.
    So, has Microsoft or anyone published an updated SCSM 2012 ETLScript script?
    Thanks,
    SK

    Could this be it?
    http://gallery.technet.microsoft.com/PowerShell-Script-to-Run-a4a2081c

  • Unable to run graph on report server

    i am unable to run the graph on report server
    i have added the XML code from http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/howto/additems/add_graph_jsp.htm
    Adding a graph to a JSP-based Web report
    but its running on local machine when i copy it to aplication its not running
    can any body tell me , what extension i want to add at application server JSP or REP
    because when we create RDF we convert it into REP, what to do in JSP case or directly copy JSP file , its still not running
    i called it from menu by
    DECLARE
         runformat varchar2(10);
    BEGIN
         runformat := 'PDF';
         run_report_object_proc('graph.jsp', runformat);
    END;
    or any other setting on application server or any other thing to run the graph
    please urgent reply is highly appreciable
    Thanks
    Junaid

    Thanks for the query, Nith.
    Refer to the "Configuring JBoss as a Windows service" appendix in the Installing and Deploying LiveCycle ES2 for JBoss guide at this link. It should help you resolve the issue at hand.
    If you need any further help, please post the relevant traces/logs and the argument that you used to set the Java heap size.
    -Samartha

  • LMS 3.1 - Unable to run EOL/EOS reports from CCO or Locally

    Unable to run the EOL/EOS reports in RME 4.2.0 LMS 3.1 (Windows)
    Jobs fail with message saying connection problems with CCO. (Proxy and CCO settings are correctly filled out)
    Tried to run the reports using the local data source option but am unable to download data files from CCO as the links given in online help (and a different link on CCO documentation) do not work.
    This is the documentation from online help:
    1. Use a server other than LMS server with internet connection as the external server.
    2. From this external server, access the following link to download the text file with XML data:
    http://www.cisco.com/cgi-bin/front.x/eox/RME_PSIRT_DETAILS.pl?action=download
    Ensure that you are a Registered User to access the above link. If you are not a Registered User, you can use the same link to register.
    3. After downloading the text file with XML data to the external server, copy this file from the external server into the LMS server under:
    NMSROOT\files\rme\jobs\inventory\reports\EOX_PSIRT\local_xml
    The text file with XML data, PSIRT_EOX_OFFLINE.txt gets saved under local_xml folder.
    The link mentioned in the instructions does not lead to any PSIR or EOX data.

    See this thread:
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd4dd24

  • FIM Reporting and SQL collation

    In our existing FIM 2010 R2 implementation, we used the default collation of SQL 2008 R2, which is SQL_Latin1_General_CP1_CI_AS.
    However, reading some articles, I got the impression that SQL server will need to be installed with Latin1_General_100_CI_AS collation for installing System Center 2012. I also read that FIM Service database will need to be in the same collation
    (i.e. Latin1_General_100_CI_AS). This means we will need to rebuild the SQL server for FIM service.
    However, reading the following article, I get a different impression. As long as the collation across all the SQL servers is the same, we should be good. Also, it is actually recommended to use SQL_Latin1_General_CP1_CI_AS rather than Latin1_General_100_CI_AS.
    In fact, The SCOM data warehouse installer will always install the data warehouse with SQL_Latin1_General_CP1_CI_AS regardless of the SQL Server collation.
    http://blogs.technet.com/b/servicemanager/archive/2012/05/24/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
    Can anybody please confirm the requirement?

    Thanks Brian
    I am planning to put ALL FIM roles onto two nodes behind F5. I understand that FIM reporting has to be installed with FIMservice so yes I want to install FIM reporting role onto both FIMService nodes. I understand that I CAN do this from your response (thankyou)
    because "there's a safeguard in place to ensure that only one server processes the reporting jobs at a time if it's enabled on more than one FIM Service server
    Can you explain what or how this safeguard works - specifically which FIMService node will run this and how the other FIMService node (2) will pick up the job if the first FIMService (node 1 )fails - do I have to configure anything ?
    Brian- with respect ; is Tomek's reply incorrect in the context of my configuration - otherwise I would need a standalone FIM Service server (not part of the F5 virtual server) running Reporting with no FIM reporting HA (beyond Hyper-V or other single node
    HA options) ?
    I realllllyyyy appreciate this feedback and discussion as I have found very little w3 or forum information about load balancing and HA for FIM reporting (I don't mean the SCSM or DW components)
    Thanks again
    Nigel

  • 10g: Database Diagram "Unable to Locate Elements For ..."

    Hello,
    In experimenting with JDeveloper 10g Diagram feature (IDE version 9.0.5.13.88), I experienced a rather vexing problem. I wondered if anyone could shed some light onto the issue for me and perhaps even help get it corrected.
    I started off by Upgrading/Converting an existing 9.0.3 project up to 9.0.5. I then created a new Database Diagram (File | New..., General -> Diagrams -> Database Diagram). I then dragged 1 unconstrained view and 2 constrained views onto the diagram. It automatically drew the view links. I arranged the views on the diagram and then closed JDeveloper. I then closed the diagram and the workspace. When I attempted to reopen the diagram, I received the following error:
    Unable to Locate Elements for Adhoc Reporting Model
    In the list were the 3 views and associated viewlinks. Pressing continue yielded a blank diagram, much to my chagrin.
    Any ideas?
    Thanks,
    Sean

    When you mention views, I presume that you mean View Objects, if this correct. I also presume that you dragged and dropped these View Objects from the navigator, and that the View Link that you mention was already visible in the navigator, is this also correct?
    Did you see your view objects in the navigator, when you re-opened JDev? Are they in the same project, as your diagram? The diagrammer should have been able to find the objects, if they are visible in your current project.
    You state that you first shutdown JDeveloper, and then closed your diagram, and workspace, did your diagram re-appear as expected when you opened up JDeveloper, and it was only after closing the diagram, and workspace, and then re-opening the workspace and diagram that you ran into problems?
    Did you save everything, before you shutdown JDeveloper?
    There is no known bug on this, so it would be good to get very specific test steps for this, to enable us to log a bug. Incidentally, why did you chose to create a Database diagram, rather than a Business Components Diagram?

  • Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

    HI,
    I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
    Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
    Setup is unable to proceed due to the following error(s):
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Regards
    Anil Kumar

    You really need to do what error is suggesting.
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Nosh Mernacaj, Identity Management Specialist

Maybe you are looking for