Unable to see EPMA application in Calculation manager

hi,
I'm novice to EPMA.
I have successfully created and deployed an EPMA planning application,but this application was not seen under planning node in calcmgr.
As per my knowledge EPMA app by default uses(deploys) calcmgr.So any one let me knw where could i look in to fix this?
thanks in advance

Are you accessing workspace url remotely on client machine?
Can you try accessing the url on the server and check whether you can see the app in the Calc manager?
Thanks
Madhavi

Similar Messages

  • Unable to see Planning application under calculation Manager

    Hello All,
    I created a Planning application in workspace and choose the Sahred Service Project as APS server.Now I want to create business rules.For that when I m lunching Calculation Manager from workspace, I m not able to see the appliaction that I had created before ,under Planning option of Calculation Manager.
    Thanks.......

    I think you created a classic planning applications. Calc manager will not recognize classic planning applications in version 11.1.1.2 and prior.
    You need to create a planning applications via EPMA and then you will see this in calc manager. If you have already opened calc manager, right click on the Planning node and do a refresh to synchronize the applications from EPMA.
    Hope this helps.
    ~SM

  • Can't see application in calculation manager

    We are testing moving from Hyperion 9.3.1 to 11.1.1.3. We have created two new applications, one using EPMA and the second as a classic but with Calculation Manager. I have set the advanced settings in the classic application to calculation manager and have restarted planning, but I still cannot see the classic application in Calculation manager, only the EMPA one.
    Thoughts on the next step?
    Thanks.

    Yes, we have done that and created another application to test again to no avail. Oracle support has sent on to development for us; we'll see.

  • Unable to use runtime prompts in calculation manager

    Hi All,
    I am unable to use runtime prompts in calculation manager (11.1.2.0).
    In Variable Designer I have selected global and created a Replacement variable with name "Entity" and selected Type as "Member" and Default Value as "Entity" from dimension list, checked the check box "rtp".
    In FIX (i.e., Member Range) I’m selecting this variable for Entity dimension, and validating this rule without any errors. And during deployment it is not prompting for Entity and directly a message appears that deployment was successful.
    My requirement is i should select a Entity member during runtime. Please help me out.
    Thanks.

    Are you accessing workspace url remotely on client machine?
    Can you try accessing the url on the server and check whether you can see the app in the Calc manager?
    Thanks
    Madhavi

  • Unable to see the application in BPM Workspace for Sales Quote tutorial

    I have created the Sales Quote tutorial steps and deployed the process. The Enter Quote Details user task is in the "SalesRep" role and I have assigned a user from WebLogic user store to "SalesRep" role in the BPM Organization artifact.
    In order to kick off the process, I logged-in to BPM workspace with the user I have assigned as "SalesRep" role but don't find the Sales Quote application under the "Applications" tab.
    I am using 11g PS4(11.1.1.5) and didn't seed the demo users, instead just created the user using WLS console.
    Any thoughts why the user is unable to see the application in BPM Workspace?
    Thanks,
    Satya

    Check two things:
    1. Login to Workspace as weblogic and click the Administration link at the top to verify the role is actually set to a user (just to double check this).
    2. Login to EM, click the SalesQuote composite, scroll down and click the EnterQuote human task component, and click the Administration tab.
    This shows you if there is a task form URI associated with this human task. If not, the initiate link won't show up in the Applications menu in Workspace.
    If not, you can either deploy again from JDeveloper, making sure you have selected the task forms in the deploy wizard and making sure the deployment is successful in the Deployments log window.
    Heidi.

  • Unable to see planning application and dimension menus under navigate tab

    Dears
    Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
    Is there any configuration lost?
    All EPM service have already started.
    Thx
    Hector

    I also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
    #Appended properties
    #Sat Jan 17 14:14:43 EST 2009
    Reports=Y
    HFM=Y
    HPSU=Y
    HP=Y
    HPS=Y
    Analyzer=Y
    BPMA=Y
    ChangeManagement=Y
    Subcontext.properties file is as follows:
    Analyzer=WebAnalysis
    Reports=hr
    HMB=metrics
    HPS=HPSWebReports
    HFM=hfm
    HP=HyperionPlanning
    BPMA=awb
    HFM-version=9.3.1
    HP-version=9.3.1
    HPS-version=9.3.1
    HMB-version=9.3.1
    BPMA-version=9.3.1
    # Parameters for all contexts
    #KeepAliveInterval=10
    #SessionTimeout=30
    #logon=bpm.logon
    #startup=cds.mode
    I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
    This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
    http://lewisxphub:19000/workspace/index.jsp
    Any Ideas?
    Thanks
    Jay
    Edited by: Keerthi on Jan 29, 2009 4:31 AM

  • Unable to see the Application component 0PA_PD

    Hi BW Experts,
    I am able to see the application component 0PA_PD under application component PA in our development system. I have activated a data source under 0PA_PD in the development system. I then  moved the data source to our test system (R/3). However in our BW test system, I am unable to see the application component 0PA_PD under PA in the modeling and hence am unable to replicate the data source in the test system.
    Could you please advice what I have to do in order to see the application component in the test system.
    Thank you in advance.
    Sai

    Thanks Mr. V,
    I did replication of the top application component PA but still the 0PA_PD did not show up.
    I also ran the RSA9 and still the 0PA_PD did not show up under the PA. Other application components like 0PA_BN are appearing under PA but not the 0PA_PD.
    I checked the test R/3 system and the data source is available under the application component 0PA_PD. But somehow the 0PA_PD is not appearing on the test BW system.
    Please help.
    Thanks,
    Sai

  • Unable to find any planning application in Calculation Manager

    Hi All,
    I had configured Calculation Manager in hyperion 11.1.2. I logged into Workspace and I select the calulation manager *[workspace->navigator->administer->calculation manager].* Through these selections I got System View wizard, in that when I tried to expand the Planning under the Name tab, I am unable to find any planning application.
    Note: I have already created two planning applications.
    Kindly guide me how to overcome it.
    Thanks and Regards
    ChiDam

    Did you create the planning applications with the option to use Calculation Manager or Business Rules?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to see server nodes in sap management console

    I am unable to see servernodes in sap management console.
    I am getting error like sapstartsrv.exe-application error ,
    "The instruction at " 0x00000000" referenced memory at "0x00000000".The memory couldnot be "written "
    click on Ok to terminate the programme.
    click on cancel to debug the programme ".
    Please advise me how can i see servernodes in the sap management console.
    Rewardpoints will be awarded.

    Hi,
    You get back your MMC , please do the following steps.
    1. Go to Run and type MMC.
    2.Go to file and select add/remove snap in ( alt+m).
    3.Click on add
    4.Select the SAP system from there.
    Save  the MMC console which you have created now....This should work fine.
    Thanks
    Pankaj

  • Unable to see Subject Areas in the Manage Privileges

    Unable to see Subject Areas when tried to set permissions for the Subject Areas using Manage Priviliges option under Administration.

    Hi,
    This is the Data Mining forum.
    If your question is about OLAP, then try the OLAP forum.
    OLAP
    Thanks, Mark

  • Unable to see the application task in Workspace in 11.1.3

    Hi All,
    We are using the 11.1.3 version, we configre the same. After completion of the process if we went through the workspace we are not ablt to see the application taks in the workspace. If i went to see the confing log file the below error is comming...
    Can any one suggest...
    (May 19, 2010, 06:40:36 PM), com.hyperion.cis.config.dependencies.DependencyConfiguration, ERROR, Can't load dependency class:
    java.lang.ClassNotFoundException: com.hyperion.avalanche.config.AvalancheTasksDependency
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:242)
    at com.hyperion.cis.config.Configurator.loadClass(Configurator.java:176)
    at com.hyperion.cis.config.dependencies.DependencyConfiguration.loadCustomDependency(DependencyConfiguration.java:109)
    at com.hyperion.cis.config.dependencies.DependencyConfiguration.<init>(DependencyConfiguration.java:92)
    at com.hyperion.cis.config.ProductDescriptor.loadDependencies(ProductDescriptor.java:308)
    at com.hyperion.cis.config.Configurator.loadClasses(Configurator.java:117)
    at com.hyperion.cis.config.Configurator.initialize(Configurator.java:88)
    at com.hyperion.cis.config.Configurator.create(Configurator.java:68)
    at com.hyperion.cis.config.InitConfigurator.execute(InitConfigurator.java:87)
    at com.installshield.wizard.StandardWizardListener.execute(Unknown Source)
    at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
    at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)

    Did you have a look at Albin's Blog?
    http://www.albinsblog.com/2011/11/oracle-soa-suite-10g-to-11g-migration_9478.html#.UOO38-Ee7ng

  • Unable to see my applications in the EAS console

    Hello! :)
    I am stuck with not being able to see any of my applications in EAS Console. I created one EPMA and one classic application and I created Essbase cubes for both of them. I have also connected successfully to my Essbase server in the EAS Console. However when I click the + sign near the Applications node under my Essbase server which is under Essbase Servers node in the Enterprise View of the EAS Console, that + sign simply disappears and no applications appear. I would be very grateful for any hints on what is wrong in my situation! Many thanks in advance!

    Hello, John!
    I am very glad to hear from you! :) Thanks so much!
    I am on version 11.1.1.3. By creating Essbase cubes I mean having gone to Administration>Manage Database, checking Refresh Database Options>Database and clicking Create in both of my applications.
    I have looked in hyperionhome\products\essbaseServer\app\ on my server machine and I saw both folders named after my applications. When I expand Essbase Server, I get the message in the status pane below that Connect is succeeded. But...! Your reply prompted me to try to log into the EAS Console and expand the Essbase Server under admin and admin sees all the applications! Now I wonder what might be wrong with my user's permissions or roles because I had granted him all administrative roles in HSS!

  • Unable to see Default alias in Identity management

    Hi Experts!!!!!
    I have added a new system in the portal which connects my backend system, I have defined the system alias and in the screen it shows me the alias is ready for user mapping,
    But i have selected SAPLOGON ticket, then the system is not visible in the identity management.But when i select uwidp the system is available for user mapping.Due to this the connector test gets failed.
    I have seen in some of the posts and found that eu_role should be given in permissions i have done it.Does this needs server restart to make the changes to take effect.
    What would be the problem I am able to see the alias in the other system when i selected SAPLOGON ticket.
    After creating the alias do we need to make any changes?
    I have followed the help document of SAP.
    Regards,
    Vamshi.

    Hi Vamshi,
    basically, SAP NetWeaver Portal offers two different Single Sing-on techniques to connect seamlessly with integrated backend systems.
    1) SAP Logon Ticket
    2) User Mapping
    This are two totally different techniques to achieve the same goal: Single Sign-on.
    Using SAP Logon Ticket, the SAP NetWeaver Portal issues an encrypted and signed HTTP coockie containing the portal user's logon id. The backend system checks the ticket and authenticates the corresponding user.
    Using User Mapping, the SAP NetWeaver Portal uses previously given backend credentials (username/password) to log into backend application on behalf of the users. The user can enter his credentials either via personalization dialog (therefore the user needs the eu_core_role) or in identity management.
    If you select SAP Logon Ticket the user does not need to map his backend credentials. That's why you do not see the system in the identity management (tab user mapping).
    However, if you select User Mapping (UIDPWD) and run a connection test the SAP NetWeaver Portal tries to log into the backend system using the mapped credentials of the current user. If the current user did not map any credentials (or if he entered wrong credentials) the connection test will fail.
    Hope this helps you to understand how the portal works.
    Best regards,
    Martin

  • *problem shown with images* Iphoto deleted my pictures, unable to see them in iPhoto Library Manager either

    Hello everyone! First post here. I have searched endless amount of forums and finally decided to post my problem.
    Today my images from Iphoto went missing. When I tried to open the iphoto app, it gave me an error that the files were unreadable and therefore not imported.
    Then I tried to rebuild iphoto by holding down option and command. I tried every option and it would still show my iphoto as 0 pictures.
    I tried to view my images by going to the show packages option but it doesnt display the masters or originals files..
    lastly I downloaded the Iphoto library manager and it was able to detect my pictures, but I could not see them or import/rebuild the library.
    Does anyone have a solution to this problem? When I tried to view the images it also shows a white triangle with a question mark in the middle. I beleiev the caption also says missing.tiff. Any help would be appreciated. I just recently got my macbook air so I have not done any backups.

    I also noticed that my photo booth pictures got deleted as well. I'm trying to recover images through a recovery software and it does give me the option to look at the masters file, but there is nothing in there...
    Also how could the Iphoto manager show that I have the 900 pictures? even though I am unable to actually see the image.. Could it be these pictures formats were changed somehow?

  • Unable to see few options in User management console - Hyp S 9 SS

    In the User management console, unable to find the option "Add new user" under the browse pane 'User Directories'.
    Is there any changes required in the configuration ?
    Thanks

    Sandeep,
    Thanks for your reply
    I assume once the Hyperion system 9 Share services is configured for the particular user. The user management console should have the provision to "Add New users" to the "User Directory"
    I think this is not related to user/groups that we add in the analytic server security option.
    Since this is the administration activity in the HFM, this option should exist for the issue. To bring this option is there any feature/option that needs to installed ?
    Are you able to understand the situation ?
    Thanks

Maybe you are looking for