Unable to see server nodes in sap management console

I am unable to see servernodes in sap management console.
I am getting error like sapstartsrv.exe-application error ,
"The instruction at " 0x00000000" referenced memory at "0x00000000".The memory couldnot be "written "
click on Ok to terminate the programme.
click on cancel to debug the programme ".
Please advise me how can i see servernodes in the sap management console.
Rewardpoints will be awarded.

Hi,
You get back your MMC , please do the following steps.
1. Go to Run and type MMC.
2.Go to file and select add/remove snap in ( alt+m).
3.Click on add
4.Select the SAP system from there.
Save the MMC console which you have created now....This should work fine.
Thanks
Pankaj

Similar Messages

Unable to see few options in User management console - Hyp S 9 SS

In the User management console, unable to find the option "Add new user" under the browse pane 'User Directories'.
Is there any changes required in the configuration ?
Thanks

Sandeep,
Thanks for your reply
I assume once the Hyperion system 9 Share services is configured for the particular user. The user management console should have the provision to "Add New users" to the "User Directory"
I think this is not related to user/groups that we add in the analytic server security option.
Since this is the administration activity in the HFM, this option should exist for the issue. To bring this option is there any feature/option that needs to installed ?
Are you able to understand the situation ?
Thanks

Restarting J2EE server nodes from Developer Studio Vs SAP Management Consol

Hi,
What makes the difference between restarting server nodes from Dev Studio and SAP Management console.
Please let me know if any documents related to this.
Thanks

Thanks for your quick reply.
I observed that options for restarting services from Dev Studio are disabled.
Could you please let me know where we need to configure to enable these options when right click on server instances.
Thanks

Unable to find SAP Server in SAP Management Console

Hi
I installed NSP Server in my Windows XP i used to work on this system.
I downloaded 90days licence from SAP site and it is valid upto 20060701.
Today we i try to start NSP Server using SAP Management Console there is server appearing in the tree which is usually appear in left panel.
Could any body help me how retrive the Server in SAP Management Console
Thanks
Uma

Hi uma
check the following service is running under windows service manager.
control panel->Administrative tool ->services
find the following service
sapnsp_instance number.
this service might be stop. start it.
also check the logon information for service.
now check the sap MMC.
regards,
kaushal

How to create one more server node for SAP J2EE server?

Hi,
Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
Thanks and Regards,
Smriti.

Hai,
Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
Thanks and Regards,

Could not stop SAP Server from SAP Management Console

I have a AS-JAVA Server.
I am trying to stop the SAP Server from the SAP Mananement console located in http:
Servername:50013
It asks me for a user id. I specify the Sidadm user id and the same pop up appear again
Please assist

I typed the password of SIDadm and still the popup comes asking me for password
The password i typed is corect

Cannot start BW or HANA instances in SAP Management console

Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

Difference between SAP SLD and SAP Management console

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shailik

Hi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy.

SAP management console doesnt show any instances

Hi,
I installed CE recently and it seemed to be working fine. But today I have been running into trouble with the SAP management console. When I open the SAP management console it shows no instances and is empty. I tried to start the server from SAP Netweaver Composition Environment 7.1 > Application server J01 (CE1) > Start Application Server and it fails also giving me this message
===================================================
============== Starting System CE1 ================
===================================================
=============== Starting database instance ...
>>The requested service has already been started.
>>More help is available by typing NET HELPMSG 2182.
>>The MaxDB Database Starter, Version 7.6.02.09
>>Copyright 2000-2007 by SAP AG
>>OK
>>============== Starting central services instance ...
>>03.07.2007 10:28:20
>>Start
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>03.07.2007 10:28:20
>>StartWait
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>============== Start operation failed !
>>Press any key to continue . . .
And surprisingly I am not able to see any logs for today, The last I can view them for is when I tried to start the application yesterday.
I also tried to go through the composition tool set up again where it could lead me to a screen to start the server , but had no luck , it didnot give me any information about the CE instances at all.
Any help in this regard would be really appreciated it.
Thanks so much
Regards
Roopa

Hi Roopa,
Follow this...
Execute sapstartsrv.exe from one of the following paths
fill with your system details, select your START profile
from \usr\sap\<SID>\PROFILE\START*, use your Service user and password (your as <hostname>\SAPService<Sid>)
\usr\sap\<sid>\SYS\exe\uc\NTI386
\usr\sap\<SID>\SYS\exe\run
Now Check MMC
Thanks & Regards,
Venkat.
Reward points if useful

SAP management console not showing AS java

Hello all,
I have made a NW04s installation system test (linux+oracle). I then installed as java add-in EP and BI (AS JAVA, EP CORE, EP, BI JAVA). It was NW04s SR2 with SPC13 and kernel not changed: 700 patch 111.
In the SAP management console there were 3 entries: one for database, one for abap instance and one for java instance.
In the abap instance node I was able to see an entry for "AS java" which was whowing two process (SDM and another one...).
I made a new test installation similar to the previous one and in the SAP management console I do not see any entry for "AS Java". Of course AS java is installed and running !
How can I get SAP management console show "AS java" ????
Thank you
Jean

Hi Jean,
Start Services.msc from run prompt (if this is windows based installation)
and look for <SID>services, where <SID> is your instance name..
Please do the following and let me know if this of any success
You get back your MMC , please do the following steps.
1. Go to Run and type MMC.
2.Go to file and select add/remove snap in ( alt+m).
3.Click on add
4.Select the SAP system from there.
Save the MMC console which you have created now....This should work fine.
Thanks
Pankaj

SAP Management console SID missing

Hi,
After restart the operating system, SAP SID is missing in SAP Management console.
Below are the details and steps I tried,
1. Starting the SAP System from the command line u2013 I got the following
message u201CSTARTSAP Continues u2026u201D
2. Oracle is up and running (Can able to start and stop oracle )
3. R3trans -d return code is "000"
4. Installed latest SAP Managent console from "SAP MMC 7.20 -> Windows Server on IA32 32bit"
6. Downloaded and install "NTSCMGR" from "Note 618053 - Download Location for NTSCMGR.EXE".
7. I have checked these note:: 82751 and 0000142100.
When i try adding servie using sapstartsrv.exe -t under /usr/sap/<SID>/SYS/exe/uc/NT1386 am getting the below message
"Cannot install service
Create Service failed:421
The acount name is invalid or does not exist, or the password is invalid for the account name specified"
Please advice on below points,
1. How to add a SAP service in services.msc (SAP<SID>_<NR>)
2. What I have to do bring back the instance in the SAPMMC and continue with my old configuration
System Environment :: This is 32bit IDES server (ECC 6.0 / Oracle 10g) sits in windows server 2k3 service pack 2
Thanks, Ganesh

Hi Orkun,
Please see th output below
E:\WINDOWS\system32>netstat -a
Active Connections
Proto Local Address          Foreign Address        State
TCP    saptest:1031            saptest:1032            ESTABLISHED
TCP    saptest:1032            saptest:1031            ESTABLISHED
TCP    saptest:1424            saptest:1425            ESTABLISHED
TCP    saptest:1425            saptest:1424            ESTABLISHED
TCP    saptest:1426            saptest:5939            ESTABLISHED
TCP    saptest:5939            saptest:1426            ESTABLISHED
E:\WINDOWS\system32>netstat -a -o
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    saptest:http            saptest:0               LISTENING       1420
TCP    saptest:epmap           saptest:0               LISTENING       680
TCP    saptest:https           saptest:0               LISTENING       1420
TCP    saptest:microsoft-ds    saptest:0               LISTENING       4
TCP    saptest:1025            saptest:0               LISTENING       432
TCP    saptest:1527            saptest:0               LISTENING       1228
TCP    saptest:5938            saptest:0               LISTENING       1420
TCP    saptest:50113           saptest:0               LISTENING       3036
TCP    saptest:netbios-ssn     saptest:0               LISTENING       4
TCP    saptest:1026            saptest:0               LISTENING       1228
TCP    saptest:1031            saptest:1032            ESTABLISHED     1420
TCP    saptest:1032            saptest:1031            ESTABLISHED     1420
TCP    saptest:1424            saptest:1425            ESTABLISHED     2804
TCP    saptest:1425            saptest:1424            ESTABLISHED     2804
TCP    saptest:1426            saptest:5939            ESTABLISHED     2804
TCP    saptest:5939            saptest:0               LISTENING       1420
TCP    saptest:5939            saptest:1426            ESTABLISHED     1420
UDP    saptest:microsoft-ds    :                                    4
UDP    saptest:isakmp          :                                    432
UDP    saptest:ipsec-msft      :                                    432
UDP    saptest:ntp             :                                    792
UDP    saptest:netbios-ns      :                                    4
UDP    saptest:netbios-dgm     :                                    4
UDP    saptest:ntp             :                                    792
UDP    saptest:1030            :                                    792
Thanks

SAP Management Console - Remote System Management

When I fire up my SAP Management Console (mmc plugin), I can see my locally installed instance for starting and stopping. Can I use the plugin to manage a remote machine?
Thanks!

This machine isn't running R/3, it is only running the Java application server. There is no System > Status which I can find.
When I open the SAPMMC on my local machine, it has the tree:
    Console Root
     SAP Systems
      J2E
       bknitter-dt
       bknitter-dt 1
       bknitter-dt 0
I'm assuming in my case, if someone were to manage this remotely, they would simply put in "bknitter-dt 00" and "bknitter-dt 01" ??
Thanks for the confirmation!
Message was edited by: Brandon Knitter

Error coming when starting SAP Management Console

Hi
      Error is coming when trying to start the Server in Microsoft Management Console . Well this has started coming just now , it was working fine except one point i want to highlight is that on the machine WAS620gui was installed and i upgraded to WAS640 gui , so is it related to with the upgradation of gui ?
The error is :
Snap in failed to initialize                 |
Name : SAP system Manager                    |
CLSID {633547EE-A302-11D1-AE59-0800009B07DBB}|

Hi
It seems that the registration of the sapmmc.dll failed.
You can recover SAP Management Console again by manually registering the MMC snap-in. Do the following:
Open a CMD.exe and walk through the directory containing the sapmmc.dll file (mostly is under %systemroot%\system32 directory) then execute the following command:
Regsvr32 sapmmc.dll
You should see a message confirmation that registration was successful.
Then start mmc again...it should now work smoothly!
Hope this helps!
Best Regards,
Federico G. Babelis
http://www.gazum.com

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

SAP Management Console (5NN13 port) does not open in Firefox or IE browser.

Hi ,
Title: SAP Management Console (5NN13 port) does not open in Firefox or IE browser.
Iam not able to see the pop up window SAPMC when i run the following in firefox browser but it works fine in my colleague's computer:
http://hostname:5NN13
I tested the same sap system with this address and it works fine - http://hostname:5NN00
Iam sure that something has to be changed in my browser but dont know what. Please help. Thank you.
Regards,
Mohan.

Dear krishna,
even if your thread is closed:
If you get this error in firefox you just have to install java plugin.
Please find documentation [here|http://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox].
Best regards,
Alex
Edited by: Alexander Foerster on Dec 2, 2011 12:44 PM

Unable to see server nodes in sap management console

Similar Messages

Maybe you are looking for